summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-22[media] v4l: Don't warn during link validation when encountering a V4L2 devnodeLaurent Pinchart
v4l2_subdev_link_validate_get_format() retrieves the remote pad format depending on the entity type and prints a warning if the entity type is not supported. The type check doesn't take the subtype into account, and thus always prints a warning for device node types, even when supported. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] mt9v022: set y_skip_top field to zero as defaultAnatolij Gustschin
Set "y_skip_top" to zero and revise comment as I do not see this line corruption on two different mt9v022 setups. The first read-out line is perfectly fine. Add mt9v022 platform data configuring y_skip_top for platforms that have issues with the first read-out line. Set y_skip_top to 1 for pcm990 board. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] mt9v022: support required register settings in snapshot modeAnatolij Gustschin
Some camera systems cannot operate mt9v022 in normal mode and use only the snapshot mode. The TechNote for mt9v022 (TN0960) and mt9v024 (TN-09-225) describes required register settings when configuring the snapshot operation. The snapshot mode requires that certain automatic functions of the image sensor should be disabled or set to fixed values. According to the TechNote bit 2 and bit 9 in the register 0x20 must be set in snapshot mode and unset for normal operation. This applies for mt9v022 Rev.3 and mt9v024. Add required reg. 0x20 settings dependent on sensor chip version. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] mt9v022: add v4l2 controls for blankingAnatolij Gustschin
Add controls for horizontal and vertical blanking. Also add an error message for case that the control handler init failed. Since setting the blanking registers is done by controls now, we shouldn't change these registers outside of the control function. Use v4l2_ctrl_s_ctrl() to set them. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] ov2640: add support for V4L2_MBUS_FMT_YUYV8_2X8, ↵Frank Schäfer
V4L2_MBUS_FMT_RGB565_2X8_BE This is the result of experimenting with the SpeedLink VAD Laplace webcam. The register sequence for V4L2_MBUS_FMT_YUYV8_2X8 has been identified by analyzing USB-logs of this device running on MS Windows. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] V4L: soc_camera: allow reading from video device if supportedAnatolij Gustschin
Try reading on video device. If the camera bus driver supports reading we can try it and return the result. Also add a debug line. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] media: mx1_camera: mark the driver BROKENShawn Guo
The mx1_camera driver has been broken for a few release cycles since commit 6bd0812 (dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c). It seems there is no one even compile tested it since then, as doing so will end up with the following error. CC drivers/media/platform/soc_camera/mx1_camera.o In file included from drivers/media/platform/soc_camera/mx1_camera.c:44:0: arch/arm/mach-imx/include/mach/dma-mx1-mx2.h:8:25: fatal error: mach/dma-v1.h: No such file or directory It seems there is no one being interested in bringing it back to work [1] so far. Let's mark it BROKEN. [1] https://lkml.org/lkml/2012/2/9/171 Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] v4l2: sn9c102 incorrectly blocks FMT_SN9C10XAlan Cox
Missing break Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] pvr2: fix minor storageAlan Cox
This should have break statements in it. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] adv7604: convert struct i2c_msg initialization to C99 formatShubhrajyoti D
Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] winbond-cir: add carrier detectionSean Young
The winbond hardware has a counter for leading edges, which increases as they are received. As we read raw IR from a fifo in an interrupt handler, we cannot correlate them to specific IR pulses so we simply count all pulses and edges until we go idle and disable the receiver. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] winbond-cir: increase IR receiver resolutionSean Young
This is needed for carrier reporting. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] winbond-cir: fix idle modeSean Young
The receiver is never disabled by idle mode since rxstate never gets set to RXSTATE_ACTIVE, so we keep on getting interrupts after the first IR activity ends. Note that ir_raw_event_reset() already calls ir_raw_event_handle(). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] stkwebcam: Fix sparse warning on undeclared symbolEzequiel Garcia
The sparse warning is: "drivers/media/usb/stkwebcam/stk-webcam.c:59:5: warning: symbol 'first_init' was not declared. Should it be static?" Declare variable 'first_init' as static and local to the function. Found by Hans Verkuil's daily build. Tested by compilation only. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21MAINTAINERS: add entries for some RC devicesSean Young
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21MAINTAINERS: Add entry for Davinci video driversLad, Prabhakar
This patch adds an entry in MAINTAINERS file for TI Davinci media drivers. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21MAINTAINERS: add an entry for radio-mr800 driverAlexey Klimov
This patch adds MAINTAINERS entry for radio-mr800 usb radio driver. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21MAINTAINERS: Add entry for S3C24XX/S3C64XX SoC CAMIF driverSylwester Nawrocki
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21MAINTAINERS: Update maintainer for smiapp and adp1653 driversSakari Ailus
And the smiapp-pll which is in a way part of the smiapp driver. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media:davinci: clk - {prepare/unprepare} for common clkMurali Karicheri
As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Also fixes some issues related to clk clean up in the driver Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media: davinci: vpbe: set device capabilitiesLad, Prabhakar
set device_caps and also change the driver and bus_info to proper values as per standard. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media: davinci: vpbe: migrate driver to videobuf2Lad, Prabhakar
This patch migrates VPBE display driver to videobuf2 framework. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media: davinci: vpbe: fix build warningLad, Prabhakar
Warnings were generated because of the following commit changed data type for address pointer 195bbca ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors add __iomem annotation to fix following warnings drivers/media/platform/davinci/vpbe_osd.c: In function ‘osd_read’: drivers/media/platform/davinci/vpbe_osd.c:49:2: warning: passing argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [enabled by default] arch/arm/include/asm/io.h:104:19: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’ This patch stores the ioremap_nocache() returned address in a void __iomem * instead of a unsigned long and passes the same to readl/writel functions which fixes the above warnings. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] v4l, smiapp, smiapp-pll, adp1653: Update contact informationSakari Ailus
Update contact information to correspond my e-mail address changes. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] staging/media: Use dev_ printks in go7007/go7007-fw.cYAMANE Toshiaki
fixed below checkpatch warning. - WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... - WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] staging/media: Use dev_ or pr_ printks in go7007/wis-saa7113.cYAMANE Toshiaki
fixed below checkpatch warnings. - WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... - WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] Staging/media: fixed spacing coding style in go7007/wis-saa7113.cYAMANE Toshiaki
fixed below checkpatch error. - ERROR: that open brace { should be on the previous line Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] staging/media: Use dev_ or pr_ printks in go7007/wis-saa7115.cYAMANE Toshiaki
fixed below checkpatch warnings. - WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... - WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] Staging/media: fixed spacing coding style in go7007/wis-saa7115.cYAMANE Toshiaki
fixed below checkpatch error. - ERROR: that open brace { should be on the previous line Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] Staging/media: Use dev_ printks in go7007/wis-ov7640.cYAMANE Toshiaki
fixed below checkpatch warnings. - WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... - WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] Staging/media: fixed spacing coding style in go7007/wis-ov7640.cYAMANE Toshiaki
fixed below checkpatch error. - ERROR: that open brace { should be on the previous line Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] gspca-sonixb: Add USB-id for Genius Eye 310Hans de Goede
Reported through: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1046608 https://bugzilla.kernel.org/show_bug.cgi?id=48111 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] MAINTAINERS: Add an entry for the pwc webcam driverHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] MAINTAINERS: Add entries for the radioShark and radioShark2 driversHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] pwc: Fix codec1 cameras no longer workingHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] gspca_pac7302: use registers 0x01 and 0x03 for red and blue balance ↵Frank Schäfer
controls Currently used registers 0xc5 and 0xc7 provide only a very coarse adjustment possibility within a very small value range (0-3). With registers 0x01 and 0x03, a fine grained adjustment with 255 steps is possible. This is also what the Windows driver does. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] gspca_pac7302: correct register documentationFrank Schäfer
R,G,B balance registers are 0x01-0x03 instead of 0x02-0x04, which lead to the wrong conclusion that values are inverted. Exposure is controlled via page 3 registers and this is already documented. Also fix a whitespace issue. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] stk1160: Try to continue with fewer transfer buffersEzequiel Garcia
Many people are trying to use stk1160 on low memory devices. Instead of failing if one allocation fails, we allow the driver to continue working if fewer transfer buffers are available. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-14[media] vivi: Kill TSTAMP_* macrosKirill Smelkov
Usage of TSTAMP_* macros has gone in 2010 in 730947bc (V4L/DVB: vivi: clean up and a major overhaul) but the macros remain. Say goodbye to them. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-13[media] siano: fix build with allmodconfigMauro Carvalho Chehab
As reported by Stephen: After merging the v4l-dvb tree, today's linux-next build (x86_64 allmodconfig) failed like this: ERROR: "sms_ir_exit" [drivers/media/common/siano/smsmdtv.ko] undefined! ERROR: "sms_ir_event" [drivers/media/common/siano/smsmdtv.ko] undefined! ERROR: "sms_ir_init" [drivers/media/common/siano/smsmdtv.ko] undefined! The smsir file should be part of the smsmdtv core, if RC is defined. Fix it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-07[media] siano: fix RC compilationMauro Carvalho Chehab
As reported by Antti and by Stephen: drivers/built-in.o: In function `sms_ir_event': /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:48: undefined reference to `ir_raw_event_store' /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:50: undefined reference to `ir_raw_event_handle' drivers/built-in.o: In function `sms_ir_init': /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:56: undefined reference to `smscore_get_board_id' /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:60: undefined reference to `rc_allocate_device' /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:72: undefined reference to `sms_get_board' /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:92: undefined reference to `sms_get_board' /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:97: undefined reference to `rc_register_device' /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:100: undefined reference to `rc_free_device' drivers/built-in.o: In function `sms_ir_exit': /home/david/checkouts/linux/drivers/media/common/siano/smsir.c:111: undefined reference to `rc_unregister_device' make: *** [vmlinux] Error 1 Caused by commit fdd1eeb49d36 "[media] siano: allow compiling it without RC support" And it happens when CONFIG_SMS_SIANO_RC=y and CONFIG_RC_CORE=m . Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-06[media] add MAINTAINERS entry for a few dvb filesMalcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-06[media] firedtv: add MAINTAINERS entryStefan Richter
There is currently discussion to add MAINTAINERS records for media drivers that don't have one yet, possibly with 'orphan' or 'odd fixes' status. Here is a proper entry for the firedtv driver (for 1394 attached DVB STBs and 1394 attached DVB cards from Digital Everywhere). The L: linux-media and T: linux-media.git lines in this entry are redundant to what scripts/get_maintainer.pl would show automatically but I added them for folks who read MAINTAINERS directly. The "(firedtv)" string is for those folks as well if they look for driver name rather than file path. The F: drivers/media/firewire/ pattern and the "FireWire media drivers" title are currently synonymous with firedtv. If more drivers get added there, this can be revisited. I don't have documentation or DVB-S2 devices to test, but I have DVB-C and DVB-T devices for testing. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-02MAINTAINERS: add support for tea5761/tea5767 tunersMauro Carvalho Chehab
Those two tuners were always maintained. As I have devices with tea5767, this is marked as Maintained. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-02MAINTAINERS: add an entry for tuner-xc2028 driverMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-02MAINTAINERS: add an entry for az6007 DVB driverMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-02MAINTAINERS: fix/add missing uapi entries for media filesMauro Carvalho Chehab
The uapi patches forgot to update the MAINTAINERS entries. Fix them and add missing entries. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-02MAINTAINERS: add an explicit entry for tm6000Mauro Carvalho Chehab
While this file was always maintained, there was no explicit entry for it. There aren't many things happening at tm6000 side for a long time: Driver works. This chip is already not sold anymore, so I don't expect much changes on its side. So, add a new entry with status equal to Odd fixes to better reflect it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-02MAINTAINERS: add an explicit entry for em28xxMauro Carvalho Chehab
While this file was always maintained, there was no explicit entry for it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-02MAINTAINERS: add an explicit entry for saa7134Mauro Carvalho Chehab
While this file was always maintained, there was no explicit entry for it. There aren't many things happening at saa7134 side for a long time: Driver works, and it is stable. When new patches are submitted, they're new boards addition for hardware I don't have. So, add a new entry with status equal to Odd fixes to better reflect it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-05-20 15:29:40 +0000