summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-22qedr: post_send/recv according to QP stateAmrani, Ram
Enable posting to SQ only in RTS, ERR and SQD QP state. Enable posting to RQ in ERR QP state. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: ignore inline flag in read verbsAmrani, Ram
In the current implementation a read verb with IB_SEND_INLINE may be illegally configured. In this fix we ignore the inline bit in the case of a read verb. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: modify QP state to error when destroying itAmrani, Ram
Current code didn't modify the QP state to error because it queried the QP state as a bitmap while it isn't. So the code never got executed. This patch fixes this and queries for each QP state respectively and not at once via a bitmask. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: return correct value on modify qpAmrani, Ram
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: return error if destroy CQ failedAmrani, Ram
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22qedr: configure the number of CQEs on CQ creationAmrani, Ram
Configure ibcq->cqe when a CQ is created. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22i40iw: Set 128B as the only supported RQ WQE sizeChien Tin Tung
RQ WQE size other than 128B is not supported. Correct RQ size calculation to use 128B only. Since this breaks ABI, add additional code to provide compatibility with v4 user provider, libi40iw. Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-22IB/cma: Fix a race condition in iboe_addr_get_sgid()Bart Van Assche
Code that dereferences the struct net_device ip_ptr member must be protected with an in_dev_get() / in_dev_put() pair. Hence insert calls to these functions. Fixes: commit 7b85627b9f02 ("IB/cma: IBoE (RoCE) IP-based GID addressing") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-18IB/rxe: Fix a memory leak in rxe_qp_cleanup()Bart Van Assche
A socket is associated with every QP by the rxe driver but sock_release() is never called. Add a call to sock_release() in rxe_qp_cleanup(). Fixes: commit 8700e3e7c48A5 ("Add Soft RoCE driver") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Moni Shoua <monis@mellanox.com> Cc: Kamal Heib <kamalh@mellanox.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: <stable@vger.kernel.org> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-18iw_cxgb4: set correct FetchBurstMax for QPsSteve Wise
The current QP FetchBurstMax value is 256B, which is incorrect since a WR can exceed that value. The result being a partial WR fetched by hardware, and a fatal "bad WR" error posted by the SGE. So bump the FetchBurstMax to 512B. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14Merge branch 'vmw_pvrdma' into merge-testDoug Ledford
2016-12-14IB: Add vmw_pvrdma driverAdit Ranadive
This patch series adds a driver for a paravirtual RDMA device. The device is developed for VMware's Virtual Machines and allows existing RDMA applications to continue to use existing Verbs API when deployed in VMs on ESXi. We recently did a presentation in the OFA Workshop [1] regarding this device. Description and RDMA Support ============================ The virtual device is exposed as a dual function PCIe device. One part is a virtual network device (VMXNet3) which provides networking properties like MAC, IP addresses to the RDMA part of the device. The networking properties are used to register GIDs required by RDMA applications to communicate. These patches add support and the all required infrastructure for letting applications use such a device. We support the mandatory Verbs API as well as the base memory management extensions (Local Inv, Send with Inv and Fast Register Work Requests). We currently support both Reliable Connected and Unreliable Datagram QPs but do not support Shared Receive Queues (SRQs). Also, we support the following types of Work Requests: o Send/Receive (with or without Immediate Data) o RDMA Write (with or without Immediate Data) o RDMA Read o Local Invalidate o Send with Invalidate o Fast Register Work Requests This version only adds support for version 1 of RoCE. We will add RoCEv2 support in a future patch. We do support registration of both MAC-based and IP-based GIDs. I have also created a git tree for our user-level driver [2]. Testing ======= We have tested this internally for various types of Guest OS - Red Hat, Centos, Ubuntu 12.04/14.04/16.04, Oracle Enterprise Linux, SLES 12 using backported versions of this driver. The tests included several runs of the performance tests (included with OFED), Intel MPI PingPong benchmark on OpenMPI, krping for FRWRs. Mellanox has been kind enough to test the backported version of the driver internally on their hardware using a VMware provided ESX build. I have also applied and tested this with Doug's k.o/for-4.9 branch (commit 5603910b). Note, that this patch series should be applied all together. I split out the commits so that it may be easier to review. PVRDMA Resources ================ [1] OFA Workshop Presentation - https://openfabrics.org/images/eventpresos/2016presentations/102parardma.pdf [2] Libpvrdma User-level library - http://git.openfabrics.org/?p=~aditr/libpvrdma.git;a=summary Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Reviewed-by: George Zhang <georgezhang@vmware.com> Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14Merge branches 'misc', 'qedr', 'reject-helpers', 'rxe' and 'srp' into merge-testDoug Ledford
2016-12-14Merge branch 'mlx' into merge-testDoug Ledford
2016-12-14Merge branch 'hfi1' into merge-testDoug Ledford
2016-12-14Merge branches 'chelsio', 'debug-cleanup', 'hns' and 'i40iw' into merge-testDoug Ledford
2016-12-14IB/mlx4: fix improper return valuePan Bian
If uhw->inlen is non-zero, the value of variable err is 0 if the copy succeeds. Then, if kzalloc() or kmalloc() returns a NULL pointer, it will return 0 to the callers. As a result, the callers cannot detect the errors. This patch fixes the bug, assign "-ENOMEM" to err before the NULL pointer checks, and remove the initialization of err at the beginning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189031 Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/ocrdma: fix bad initializationPan Bian
In function ocrdma_mbx_create_ah_tbl(), returns the value of status on errors. However, because status is initialized with 0, 0 will be returned even if on error paths. This patch initialize status with "-ENOMEM". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188831 Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14infiniband: nes: return value of skb_linearize should be handledZhouyi Zhou
Return value of skb_linearize should be handled in function nes_netdev_start_xmit. Compiled in x86_64 Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14MAINTAINERS: Update Intel RDMA RNIC driver maintainersShiraz Saleem
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14MAINTAINERS: Remove Mitesh Ahuja from emulex maintainersLeon Romanovsky
Remove Mitesh Ahuja <mitesh.ahuja@avagotech.com> from maintainers file. This email address seems not active and causes to mail bounces during submissions. Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/core: fix unmap_sg argumentSebastian Ott
__ib_umem_release calls dma_unmap_sg with a different number of sg_entries than ib_umem_get uses for dma_map_sg. This might cause trouble for implementations that merge sglist entries and results in the following dma debug complaint: DMA-API: device driver frees DMA sg list with different entry count [map count=2] [unmap count=1] Fix it by using the correct value. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14qede: fix general protection fault may occur on probeAmrani, Ram
The recent introduction of qedr driver support in qede causes a GPF when probing the driver in a server without a RoCE enabled QLogic NIC. This fix avoids using an uninitialized pointer in such a case. Caught by the kernel test robot. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/mthca: Replace pci_pool_alloc by pci_pool_zallocSouptick Joarder
In mthca_create_ah(), pci_pool_alloc() followed by memset will be replaced by pci_pool_zalloc() Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14mlx5, calc_sq_size(): Make a debug message more informativeBart Van Assche
Make it clear that qp->sq.wqe_cnt is not the number of WQEs. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14mlx5: Remove a set-but-not-used variableBart Van Assche
This has been detected by building the mlx5 driver with W=1. Fixes: 1a412fb1caa2 ('net/mlx5: Fixes: 1a412fb1caa2 (IB/mlx5: Modify QP commands via mlx5 ifc') Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14mlx5: Use { } instead of { 0 } to init structBart Van Assche
Detected by sparse. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/srp: Make writing the add_target sysfs attr interruptibleBart Van Assche
Avoid that shutdown of srp_daemon is delayed if add_target_mutex is held by another process. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/srp: Make mapping failures easier to debugBart Van Assche
Make it easier to figure out what is going on if memory mapping fails because more memory regions than mr_per_cmd are needed. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/srp: Make login failures easier to debugBart Van Assche
If login fails because memory region allocation failed it can be hard to figure out what happened. Make it easier to figure out why login failed by logging a message if ib_alloc_mr() fails. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/srp: Introduce a local variable in srp_add_one()Bart Van Assche
This patch makes the srp_add_one() code more compact and does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n buildBart Van Assche
Avoid that the kernel build fails as follows if dynamic debug support is disabled: drivers/infiniband/ulp/srp/ib_srp.c:2272:3: error: implicit declaration of function 'DEFINE_DYNAMIC_DEBUG_METADATA' drivers/infiniband/ulp/srp/ib_srp.c:2272:33: error: 'ddm' undeclared (first use in this function) drivers/infiniband/ulp/srp/ib_srp.c:2275:39: error: '_DPRINTK_FLAGS_PRINT' undeclared (first use in this function) Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/multicast: Check ib_find_pkey() return valueBart Van Assche
This patch avoids that Coverity complains about not checking the ib_find_pkey() return value. Fixes: commit 547af76521b3 ("IB/multicast: Report errors on multicast groups if P_key changes") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IPoIB: Avoid reading an uninitialized member variableBart Van Assche
This patch avoids that Coverity reports the following: Using uninitialized value port_attr.state when calling printk Fixes: commit 94232d9ce817 ("IPoIB: Start multicast join process only on active ports") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: <stable@vger.kernel.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/mad: Fix an array index checkBart Van Assche
The array ib_mad_mgmt_class_table.method_table has MAX_MGMT_CLASS (80) elements. Hence compare the array index with that value instead of with IB_MGMT_MAX_METHODS (128). This patch avoids that Coverity reports the following: Overrunning array class->method_table of 80 8-byte elements at element index 127 (byte offset 1016) using index convert_mgmt_class(mad_hdr->mgmt_class) (which evaluates to 127). Fixes: commit b7ab0b19a85f ("IB/mad: Verify mgmt class in received MADs") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: <stable@vger.kernel.org> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/mlx4: Rework special QP creation error pathBart Van Assche
The special QP creation error path relies on offset_of(struct mlx4_ib_sqp, qp) == 0. Remove this assumption because that makes the QP creation code easier to understand. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/srpt: Report login failures only onceBart Van Assche
Report the following message only once if no ACL has been configured yet for an initiator port: "Rejected login because no ACL has been configured yet for initiator %s.\n" Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/usnic: simplify IS_ERR_OR_NULL to IS_ERRJulia Lawall
The function usnic_ib_qp_grp_get_chunk only returns an ERR_PTR value or a valid pointer, never NULL. The same is true of get_qp_res_chunk, which just returns the result of calling usnic_ib_qp_grp_get_chunk. Simplify IS_ERR_OR_NULL to IS_ERR in both cases. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,e; @@ t = \(usnic_ib_qp_grp_get_chunk(...)\|get_qp_res_chunk(...)\) ... when != t=e - IS_ERR_OR_NULL(t) + IS_ERR(t) @@ expression t,e,e1; @@ t = \(usnic_ib_qp_grp_get_chunk(...)\|get_qp_res_chunk(...)\) ... when != t=e ?- t ? PTR_ERR(t) : e1 + PTR_ERR(t) ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/core: Issue DREQ when receiving REQ/REP for stale QPHans Westgaard Ry
from "InfiBand Architecture Specifications Volume 1": A QP is said to have a stale connection when only one side has connection information. A stale connection may result if the remote CM had dropped the connection and sent a DREQ but the DREQ was never received by the local CM. Alternatively the remote CM may have lost all record of past connections because its node crashed and rebooted, while the local CM did not become aware of the remote node's reboot and therefore did not clean up stale connections. and: A local CM may receive a REQ/REP for a stale connection. It shall abort the connection issuing REJ to the REQ/REP. It shall then issue DREQ with "DREQ:remote QPN” set to the remote QPN from the REQ/REP. This patch solves a problem with reuse of QPN. Current codebase, that is IPoIB, relies on a REAP-mechanism to do cleanup of the structures in CM. A problem with this is the timeconstants governing this mechanism; they are up to 768 seconds and the interface may look inresponsive in that period. Issuing a DREQ (and receiving a DREP) does the necessary cleanup and the interface comes up. Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/nes: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/isert: do not ignore errors in dma_map_single()Alexey Khoroshilov
There are several places, where errors in dma_map_single() are ignored. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/rdmavt: Only put mmap_info ref if it existsJim Foraker
rvt_create_qp() creates qp->ip only when a qp creation request comes from userspace (udata is not NULL). If we exceed the number of available queue pairs however, the error path always attempts to put a kref to this structure. If the requestor is inside the kernel, this leads to a crash. We fix this by checking that qp->ip is not NULL before caling kref_put(). Signed-off-by: Jim Foraker <foraker1@llnl.gov> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/rdmavt: Handle the kthread worker using the new APIPetr Mladek
Use the new API to create and destroy the cq kthread worker. The API hides some implementation details. In particular, kthread_create_worker() allocates and initializes struct kthread_worker. It runs the kthread the right way and stores task_struct into the worker structure. In addition, the *on_cpu() variant binds the kthread to the given cpu and the related memory node. kthread_destroy_worker() flushes all pending works, stops the kthread and frees the structure. This patch does not change the existing behavior. Note that we must use the on_cpu() variant because the function starts the kthread and it must bind it to the right CPU before waking. The numa node is associated for given CPU as well. Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/rdmavt: Avoid queuing work into a destroyed cq kthread workerPetr Mladek
The memory barrier is not enough to protect queuing works into a destroyed cq kthread. Just imagine the following situation: CPU1 CPU2 rvt_cq_enter() worker = cq->rdi->worker; rvt_cq_exit() rdi->worker = NULL; smp_wmb(); kthread_flush_worker(worker); kthread_stop(worker->task); kfree(worker); // nothing queued yet => // nothing flushed and // happily stopped and freed if (likely(worker)) { // true => read before CPU2 acted cq->notify = RVT_CQ_NONE; cq->triggered++; kthread_queue_work(worker, &cq->comptask); BANG: worker has been flushed/stopped/freed in the meantime. This patch solves this by protecting the critical sections by rdi->n_cqs_lock. It seems that this lock is not much contended and looks reasonable for this purpose. One catch is that rvt_cq_enter() might be called from IRQ context. Therefore we must always take the lock with IRQs disabled to avoid a possible deadlock. Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/mlx4: avoid a -Wmaybe-uninitialize warningArnd Bergmann
There is an old warning about mlx4_SW2HW_EQ_wrapper on x86: ethernet/mellanox/mlx4/resource_tracker.c: In function ‘mlx4_SW2HW_EQ_wrapper’: ethernet/mellanox/mlx4/resource_tracker.c:3071:10: error: ‘eq’ may be used uninitialized in this function [-Werror=maybe-uninitialized] The problem here is that gcc won't track the state of the variable across a spin_unlock. Moving the assignment out of the lock is safe here and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/mlx5: avoid bogus -Wmaybe-uninitialized warningArnd Bergmann
We get a false-positive warning in linux-next for the mlx5 driver: infiniband/hw/mlx5/mr.c: In function ‘mlx5_ib_reg_user_mr’: infiniband/hw/mlx5/mr.c:1172:5: error: ‘order’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1161:6: note: ‘order’ was declared here infiniband/hw/mlx5/mr.c:1173:6: error: ‘ncont’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1160:6: note: ‘ncont’ was declared here infiniband/hw/mlx5/mr.c:1173:6: error: ‘page_shift’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1158:6: note: ‘page_shift’ was declared here infiniband/hw/mlx5/mr.c:1143:13: error: ‘npages’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1159:6: note: ‘npages’ was declared here I had a trivial workaround for gcc-5 or higher, but that didn't work on gcc-4.9 unfortunately. The only way I found to avoid the warnings for gcc-4.9, short of initializing each of the arguments first was to change the calling conventions to separate the error code from the umem pointer. This avoids casting the error codes from one pointer to another incompatible pointer, and lets gcc figure out when that the data is actually valid whenever we return successfully. Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14rdma UAPI: Use __kernel_sockaddr_storageJason Gunthorpe
The kernel side is #ifdef'd to this type, and the UAPI header should use it directly. It has slightly different alignment requirments from the usual user space version. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14nvmet_rdma: log the connection reject messageSteve Wise
Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14ib_isert: log the connection reject messageSteve Wise
Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14rds_rdma: log the connection reject messageSteve Wise
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-05-15 17:57:32 +0000