summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-24Merge branch 'for-5.10/block' into for-5.10/driversJens Axboe
* for-5.10/block: (140 commits) bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag bdi: invert BDI_CAP_NO_ACCT_WB bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag mm: use SWP_SYNCHRONOUS_IO more intelligently bdi: remove BDI_CAP_SYNCHRONOUS_IO bdi: remove BDI_CAP_CGROUP_WRITEBACK block: lift setting the readahead size into the block layer md: update the optimal I/O size on reshape bdi: initialize ->ra_pages and ->io_pages in bdi_init aoe: set an optimal I/O size bcache: inherit the optimal I/O size drbd: remove dead code in device_to_statistics fs: remove the unused SB_I_MULTIROOT flag block: mark blkdev_get static PM: mm: cleanup swsusp_swap_check mm: split swap_type_of PM: rewrite is_hibernate_resume_dev to not require an inode mm: cleanup claim_swapfile ocfs2: cleanup o2hb_region_dev_store dasd: cleanup dasd_scan_partitions ...
2020-09-24bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flagChristoph Hellwig
Replace the two negative flags that are always used together with a single positive flag that indicates the writeback capability instead of two related non-capabilities. Also remove the pointless wrappers to just check the flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: invert BDI_CAP_NO_ACCT_WBChristoph Hellwig
Replace BDI_CAP_NO_ACCT_WB with a positive BDI_CAP_WRITEBACK_ACCT to make the checks more obvious. Also remove the pointless bdi_cap_account_writeback wrapper that just obsfucates the check. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24mm: use SWP_SYNCHRONOUS_IO more intelligentlyChristoph Hellwig
There is no point in trying to call bdev_read_page if SWP_SYNCHRONOUS_IO is not set, as the device won't support it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: remove BDI_CAP_SYNCHRONOUS_IOChristoph Hellwig
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to decided if ->rw_page can be used on a block device. Just check up for the method instead. The only complication is that zram needs a second set of block_device_operations as it can switch between modes that actually support ->rw_page and those who don't. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: remove BDI_CAP_CGROUP_WRITEBACKChristoph Hellwig
Just checking SB_I_CGROUPWB for cgroup writeback support is enough. Either the file system allocates its own bdi (e.g. btrfs), in which case it is known to support cgroup writeback, or the bdi comes from the block layer, which always supports cgroup writeback. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24block: lift setting the readahead size into the block layerChristoph Hellwig
Drivers shouldn't really mess with the readahead size, as that is a VM concept. Instead set it based on the optimal I/O size by lifting the algorithm from the md driver when registering the disk. Also set bdi->io_pages there as well by applying the same scheme based on max_sectors. To ensure the limits work well for stacking drivers a new helper is added to update the readahead limits from the block limits, which is also called from disk_stack_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24md: update the optimal I/O size on reshapeChristoph Hellwig
The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: initialize ->ra_pages and ->io_pages in bdi_initChristoph Hellwig
Set up a readahead size by default, as very few users have a good reason to change it. This means code, ecryptfs, and orangefs now set up the values while they were previously missing it, while ubifs, mtd and vboxsf manually set it to 0 to avoid readahead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Richard Weinberger <richard@nod.at> [ubifs, mtd] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24aoe: set an optimal I/O sizeChristoph Hellwig
aoe forces a larger readahead size, but any reason to do larger I/O is not limited to readahead. Also set the optimal I/O size, and remove the local constants in favor of just using SZ_2G. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bcache: inherit the optimal I/O sizeChristoph Hellwig
Inherit the optimal I/O size setting just like the readahead window, as any reason to do larger I/O does not apply to just readahead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24drbd: remove dead code in device_to_statisticsChristoph Hellwig
Ever since the switch to blk-mq, a lower device not used for VM writeback will not be marked congested, so the check will never trigger. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24fs: remove the unused SB_I_MULTIROOT flagChristoph Hellwig
The last user of SB_I_MULTIROOT is disappeared with commit f2aedb713c28 ("NFS: Add fs_context support.") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: mark blkdev_get staticChristoph Hellwig
There are no users outside the core block code left now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23PM: mm: cleanup swsusp_swap_checkChristoph Hellwig
Use blkdev_get_by_dev instead of bdget + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23mm: split swap_type_ofChristoph Hellwig
swap_type_of is used for two entirely different purposes: (1) check what swap type a given device/offset corresponds to (2) find the first available swap device that can be written to Mixing both in a single function creates an unreadable mess. Create two separate functions instead, and switch both to pass a dev_t instead of a struct block_device to further simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23PM: rewrite is_hibernate_resume_dev to not require an inodeChristoph Hellwig
Just check the dev_t to help simplifying the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23mm: cleanup claim_swapfileChristoph Hellwig
Use blkdev_get_by_dev instead of bdgrab + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23ocfs2: cleanup o2hb_region_dev_storeChristoph Hellwig
Use blkdev_get_by_dev instead of igrab (aka open coded bdgrab) + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23dasd: cleanup dasd_scan_partitionsChristoph Hellwig
Use blkdev_get_by_dev instead of bdget_disk + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23raw: don't keep unopened block device aroundChristoph Hellwig
Turn binding into a normal dev_t as the struct block device doesn't buy us anything and use blkdev_open_by_dev to actually open it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23zram: cleanup backing_dev_storeChristoph Hellwig
Use blkdev_get_by_dev instead of bdgrab + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23pktcdvd: use blkdev_get_by_dev instead of open coding itChristoph Hellwig
Replace bdget + blkdev_get by blkdev_get_by_dev. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23pktcdvd: remove the if 0'ed pkt_start_recovery functionChristoph Hellwig
Remove code which has been dead since the initial commit. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: cleanup blkdev_bszsetChristoph Hellwig
Use blkdev_get_by_dev instead of bdgrab + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: cleanup partition scanning in register_diskChristoph Hellwig
Use blkdev_get_by_dev instead of open coding it using bdget_disk + blkdev_get, and split the code to read the partition table into a separate helper to make it a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: move the NEED_PART_SCAN flag to struct gendiskChristoph Hellwig
We can only scan for partitions on the whole disk, so move the flag from struct block_device to struct gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: allow 'chunk_sectors' to be non-power-of-2Mike Snitzer
It is possible, albeit more unlikely, for a block device to have a non power-of-2 for chunk_sectors (e.g. 10+2 RAID6 with 128K chunk_sectors, which results in a full-stripe size of 1280K. This causes the RAID6's io_opt to be advertised as 1280K, and a stacked device _could_ then be made to use a blocksize, aka chunk_sectors, that matches non power-of-2 io_opt of underlying RAID6 -- resulting in stacked device's chunk_sectors being a non power-of-2). Update blk_queue_chunk_sectors() and blk_max_size_offset() to accommodate drivers that need a non power-of-2 chunk_sectors. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: use lcm_not_zero() when stacking chunk_sectorsMike Snitzer
Like 'io_opt', blk_stack_limits() should stack 'chunk_sectors' using lcm_not_zero() rather than min_not_zero() -- otherwise the final 'chunk_sectors' could result in sub-optimal alignment of IO to component devices in the IO stack. Also, if 'chunk_sectors' isn't a multiple of 'physical_block_size' then it is a bug in the driver and the device should be flagged as 'misaligned'. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: fix bmd->is_null_mapped initializationChristoph Hellwig
bmd is allocated using kmalloc in bio_alloc_map_data, so make sure is_null_mapped is properly initialized to false for the !null_mapped case. Fixes: f3256075ba49 ("block: remove the BIO_NULL_MAPPED flag") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: drop double zeroingJulia Lawall
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ x = - kzalloc + kmalloc (...) ... sg_init_table(x,...) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from Jakub Kicinski: - fix failure to add bond interfaces to a bridge, the offload-handling code was too defensive there and recent refactoring unearthed that. Users complained (Ido) - fix unnecessarily reflecting ECN bits within TOS values / QoS marking in TCP ACK and reset packets (Wei) - fix a deadlock with bpf iterator. Hopefully we're in the clear on this front now... (Yonghong) - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel) - fix AQL on mt76 devices with FW rate control and add a couple of AQL issues in mac80211 code (Felix) - fix authentication issue with mwifiex (Maximilian) - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro) - fix exception handling for multipath routes via same device (David Ahern) - revert back to a BH spin lock flavor for nsid_lock: there are paths which do require the BH context protection (Taehee) - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke) - fix ife module load deadlock (Cong) - make an adjustment to netlink reply message type for code added in this release (the sole change touching uAPI here) (Michal) - a number of fixes for small NXP and Microchip switches (Vladimir) [ Pull request acked by David: "you can expect more of this in the future as I try to delegate more things to Jakub" ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits) net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU net: Update MAINTAINERS for MediaTek switch driver net/mlx5e: mlx5e_fec_in_caps() returns a boolean net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock net/mlx5e: kTLS, Fix leak on resync error flow net/mlx5e: kTLS, Add missing dma_unmap in RX resync net/mlx5e: kTLS, Fix napi sync and possible use-after-free net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() net/mlx5e: Fix multicast counter not up-to-date in "ip -s" net/mlx5e: Fix endianness when calculating pedit mask first bit net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported net/mlx5e: CT: Fix freeing ct_label mapping net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready net/mlx5e: Use synchronize_rcu to sync with NAPI net/mlx5e: Use RCU to protect rq->xdp_prog ...
2020-09-22Merge tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A few fixes - most of them regression fixes from this cycle, but also a few stable heading fixes, and a build fix for the included demo tool since some systems now actually have gettid() available" * tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block: io_uring: fix openat/openat2 unified prep handling io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL tools/io_uring: fix compile breakage io_uring: don't use retry based buffered reads for non-async bdev io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there io_uring: don't run task work on an exiting task io_uring: drop 'ctx' ref on task work cancelation io_uring: grab any needed state during defer prep
2020-09-22Merge tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few NVMe fixes, and a dasd write zero fix" * tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block: nvmet: get transport reference for passthru ctrl nvme-core: get/put ctrl and transport module in nvme_dev_open/release() nvme-tcp: fix kconfig dependency warning when !CRYPTO nvme-pci: disable the write zeros command for Intel 600P/P3100 s390/dasd: Fix zero write for FBA devices
2020-09-22Merge tag 'trace-v5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Check kprobe is enabled before unregistering from ftrace as it isn't registered when disabled. - Remove kprobes enabled via command-line that is on init text when freed. - Add missing RCU synchronization for ftrace trampoline symbols removed from kallsyms. - Free trampoline on error path if ftrace_startup() fails. - Give more space for the longer PID numbers in trace output. - Fix a possible double free in the histogram code. - A couple of fixes that were discovered by sparse. * tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: init: make xbc_namebuf static kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot tracing: fix double free ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer tracing: Make the space reserved for the pid wider ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms ftrace: Free the trampoline when ftrace_startup() fails kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
2020-09-21Merge branch 'Fix-broken-tc-flower-rules-for-mscc_ocelot-switches'David S. Miller
Vladimir Oltean says: ==================== Fix broken tc-flower rules for mscc_ocelot switches All 3 switch drivers from the Ocelot family have the same bug in the VCAP IS2 key offsets, which is that some keys are in the incorrect order. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean
The IS2 IP4_TCP_UDP key offsets do not correspond to the VSC7514 datasheet. Whether they work or not is unknown to me. On VSC9959 and VSC9953, with the same mistake and same discrepancy from the documentation, tc-flower src_port and dst_port rules did not work, so I am assuming the same is true here. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean
Since these were copied from the Felix VCAP IS2 code, and only the offsets were adjusted, the order of the bit fields is still wrong. Fix it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesXiaoliang Yang
Some of the IS2 IP4_TCP_UDP keys are not correct, like L4_DPORT, L4_SPORT and other L4 keys. This prevents offloaded tc-flower rules from matching on src_port and dst_port for TCP and UDP packets. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21inet_diag: validate INET_DIAG_REQ_PROTOCOL attributeEric Dumazet
User space could send an invalid INET_DIAG_REQ_PROTOCOL attribute as caught by syzbot. BUG: KMSAN: uninit-value in inet_diag_lock_handler net/ipv4/inet_diag.c:55 [inline] BUG: KMSAN: uninit-value in __inet_diag_dump+0x58c/0x720 net/ipv4/inet_diag.c:1147 CPU: 0 PID: 8505 Comm: syz-executor174 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219 inet_diag_lock_handler net/ipv4/inet_diag.c:55 [inline] __inet_diag_dump+0x58c/0x720 net/ipv4/inet_diag.c:1147 inet_diag_dump_compat+0x2a5/0x380 net/ipv4/inet_diag.c:1254 netlink_dump+0xb73/0x1cb0 net/netlink/af_netlink.c:2246 __netlink_dump_start+0xcf2/0xea0 net/netlink/af_netlink.c:2354 netlink_dump_start include/linux/netlink.h:246 [inline] inet_diag_rcv_msg_compat+0x5da/0x6c0 net/ipv4/inet_diag.c:1288 sock_diag_rcv_msg+0x24f/0x620 net/core/sock_diag.c:256 netlink_rcv_skb+0x6d7/0x7e0 net/netlink/af_netlink.c:2470 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x11c8/0x1490 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x173a/0x1840 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0xc82/0x1240 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x6d1/0x820 net/socket.c:2440 __do_sys_sendmsg net/socket.c:2449 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2447 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x441389 Code: e8 fc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff3b02ce98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441389 RDX: 0000000000000000 RSI: 0000000020001500 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000402130 R13: 00000000004021c0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:143 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:126 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:80 slab_alloc_node mm/slub.c:2907 [inline] __kmalloc_node_track_caller+0x9aa/0x12f0 mm/slub.c:4511 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x35f/0xb30 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1094 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline] netlink_sendmsg+0xdb9/0x1840 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0xc82/0x1240 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x6d1/0x820 net/socket.c:2440 __do_sys_sendmsg net/socket.c:2449 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2447 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 3f935c75eb52 ("inet_diag: support for wider protocol numbers") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Christoph Paasch <cpaasch@apple.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCUVladimir Oltean
When calling the RCU brother of br_vlan_get_pvid(), lockdep warns: ============================= WARNING: suspicious RCU usage 5.9.0-rc3-01631-g13c17acb8e38-dirty #814 Not tainted ----------------------------- net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage! Call trace: lockdep_rcu_suspicious+0xd4/0xf8 __br_vlan_get_pvid+0xc0/0x100 br_vlan_get_pvid_rcu+0x78/0x108 The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group() which calls rtnl_dereference() instead of rcu_dereference(). In turn, rtnl_dereference() calls rcu_dereference_protected() which assumes operation under an RCU write-side critical section, which obviously is not the case here. So, when the incorrect primitive is used to access the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may cause various unexpected problems. I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot share the same implementation. So fix the bug by splitting the 2 functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups under proper locking annotations. Fixes: 7582f5b70f9a ("bridge: add br_vlan_get_pvid_rcu()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21Merge tag 'mlx5-fixes-2020-09-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes-2020-09-18 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. v1->v2: Remove missing patch from -stable list. For -stable v5.1 ('net/mlx5: Fix FTE cleanup') For -stable v5.3 ('net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported') ('net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported') For -stable v5.7 ('net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready') For -stable v5.8 ('net/mlx5e: Use RCU to protect rq->xdp_prog') ('net/mlx5e: Fix endianness when calculating pedit mask first bit') ('net/mlx5e: Use synchronize_rcu to sync with NAPI') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: Update MAINTAINERS for MediaTek switch driverSean Wang
Update maintainers for MediaTek switch driver with Landen Chao who is familiar with MediaTek MT753x switch devices and will help maintenance from the vendor side. Cc: Steven Liu <steven.liu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net/mlx5e: mlx5e_fec_in_caps() returns a booleanSaeed Mahameed
Returning errno is a bug, fix that. Also fixes smatch warnings: drivers/net/ethernet/mellanox/mlx5/core/en/port.c:453 mlx5e_fec_in_caps() warn: signedness bug returning '(-95)' Fixes: 2132b71f78d2 ("net/mlx5e: Advertise globaly supported FEC modes") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com>
2020-09-21net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlockSaeed Mahameed
The spinlock only needed when accessing the channel's icosq, grab the lock after the buf allocation in resync_post_get_progress_params() to avoid kzalloc(GFP_KERNEL) in atomic context. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Reported-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Fix leak on resync error flowSaeed Mahameed
Resync progress params buffer and dma weren't released on error, Add missing error unwinding for resync_post_get_progress_params(). Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Add missing dma_unmap in RX resyncSaeed Mahameed
Progress params dma address is never unmapped, unmap it when completion handling is over. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Fix napi sync and possible use-after-freeTariq Toukan
Using synchronize_rcu() is sufficient to wait until running NAPI quits. See similar upstream fix with detailed explanation: ("net/mlx5e: Use synchronize_rcu to sync with NAPI") This change also fixes a possible use-after-free as the NAPI might be already released at this stage. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-05-18 19:12:04 +0000