summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-04ath10k: allow setting coverage classBenjamin Berg
Unfortunately ath10k does not generally allow modifying the coverage class with the stock firmware and Qualcomm has so far refused to implement this feature so that it can be properly supported in ath10k. If we however know the registers that need to be modified for proper operation with a higher coverage class, then we can do these modifications from the driver. This is a hack and might cause subtle problems but as it's not enabled by default (only when user space changes the coverage class explicitly) it should not cause new problems for existing setups. But still this should be considered as an experimental feature and used with caution. This patch implements the support for first generation cards (QCA9880, QCA9887 and so on) which are based on a core that is similar to ath9k. The registers are modified in place and need to be re-written every time the firmware sets them. To achieve this the register status is verified after certain WMI events from the firmware. The coverage class may not be modified temporarily right after the card re-initializes the registers. This is for example the case during scanning. Thanks to Sebastian Gottschall <s.gottschall@dd-wrt.com> for initially working on a userspace support for this. This patch wouldn't have been possible without this documentation. Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-10-04ath10k: add platform regulatory domain supportBartosz Markowski
This overrides whatever regulatory the device EEPROM contains and uses what the platform says instead - in this implementation the ACPI driver. In case the hint is not programmed or corrupted (0xffff) the device falls back to the eeprom programmed settings. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> [kvalo@qca.qualcomm.com: remove ifdef, change error handling, change info messages to dbg] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-10-04ath: export alpha2 helperMichal Kazior
This will be helpful for drivers that can acquire alpha2 regulatory codes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-10-04ath10k: add cc_wraparound type for QCA9888 and QCA9884Anilkumar Kolli
During offchannel scan, iw survey dump shows wrong values. Fix this by assigning cycle counter wranarround type for QCA9888 and QCA9884, they share same config with QCA4019. Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-10-04ath10k: provide provision to get Transmit Power Control stats for 10.4Maharaja Kennadyrajan
This patch helps to get the TPC stats for 10.4 fw variants. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath6kl: fix return value in ath6kl_wmi_set_pvb_cmdChaehyun Lim
When building with W=1, we got one warning as belows: drivers/net/wireless/ath/ath6kl/wmi.c:3509:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] At the end of ath6kl_wmi_set_pvb_cmd, it is returned by 0 regardless of return value of ath6kl_wmi_cmd_send. This patch fixes return value from 0 to ret that has result of ath6kl_wmi_cmd_send execution. Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath9k: disable RNG by defaultMiaoqing Pan
ath9k RNG will dominates all the noise sources from the real HW RNG, disable it by default. But we strongly recommand to enable it if the system without HW RNG, especially on embedded systems. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Acked-by: Stephan Mueller <smueller@chronox.de> Acked-by: Stephan Mueller <smueller@chronox.de> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath10k: fix copy engine 5 destination ring stuckRajkumar Manoharan
Firmware is running watchdog timer for tracking copy engine ring index and write index. Whenever both indices are stuck at same location for given duration, watchdog will be trigger to assert target. While updating copy engine destination ring write index, driver ensures that write index will not be same as read index by finding delta between these two indices (CE_RING_DELTA). HTT target to host copy engine (CE5) is special case where ring buffers will be reused and delta check is not applied while updating write index. In rare scenario, whenever CE5 ring is full, both indices will be referring same location and this is causing CE ring stuck issue as explained above. This issue is originally reported on IPQ4019 during long hour stress testing and during veriwave max clients testsuites. The same issue is also observed in other chips as well. Fix this by ensuring that write index is one less than read index which means that full ring is available for receiving data. Cc: stable@vger.kernel.org Tested-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath10k: Ignore SWBA event for a vif if its marked for no beaconMohammed Shafi Shajakhan
Ignore processing further in SWBA event scheduled for a vif, if mac80211 has marked the particular vif for stop beaconing and brought the vdev down in 'ath10k_control_beaconing'. This should potentially avoid ath10k warning/error messages while running continuous wifi down/up with max number of vaps configured. Found this change during code walk through and going through other beacon configuration related functions in ath10k Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath10k: fix error return code in ahbWei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in function ath10k_ahb_probe() or ath10k_ahb_resource_init(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: support up to 64 vdevsBen Greear
The (1 << x) - 1 trick won't work when you are trying to fill up all 64 bits, so add special case for that. Signed-off-by: Ben Greear <greearb@candelatech.com> [kvalo@qca.qualcomm.com: remove the sentence about moving limits] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: document cycle count related countersBen Greear
They are not necessarily named in an intuitive manner, so at least add some comments to help the next person. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: fix typo in logging messageBen Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap modeVasanthakumar Thiagarajan
Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future) rx_hdr_status is not padded to align in 4-byte boundary. Define a new hw_params field to handle different alignment behaviour between different hw. This patch fixes improper retrieval of rfc1042 header with QCA4019. This patch along with "ath10k: Properly remove padding from the start of rx payload" will fix traffic failure in ethernet decap mode for QCA4019. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: do not check if reset is NULLMasahiro Yamada
Since reset_control_get() never returns NULL, we can use IS_ERR() instead of IS_ERR_OR_NULL(). The return statements can be simpler as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: use devm_reset_control_get() instead of reset_control_get()Masahiro Yamada
Use the managed variant of reset_control_get() to simplify the failure path and the .remove callback. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: use devm_clk_get() instead of clk_get()Masahiro Yamada
Use the managed variant of clk_get() to simplify the failure path and the .remove callback. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: spelling and miscellaneous neateningJoe Perches
Correct some trivial comment typos. Remove unnecessary parentheses in a long line. Signed-off-by: Joe Perches <joe@perches.com> [kvalo@qca.qualcomm.com: drop the change for return] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-26brcmfmac: drop unused fields from struct brcmf_pubRafał Miłecki
They seem to be there from the first day. We calculate these values but never use them. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix memory leak in brcmf_fill_bss_paramRafał Miłecki
This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 1f0dc59a6de ("brcmfmac: rework .get_station() callback") Cc: stable@vger.kernel.org # 4.2+ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Stop log spam from each successful interruptLarry Finger
As soon as debugging is turned on, the logs are filled with messages reporting the interrupt status. As this quantity is usually zero, this output is not needed. In fact, there will be a report if the status is not zero, thus the debug line in question could probably be deleted. Rather than taking that action, I have changed it to only be printed when the newly added RTL8XXXU_DEBUG_INTERRUPT bit is set in the debug mask. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Use a struct rtl8xxxu_fileops * in rtl8xxxu_init_device()Jes Sorensen
This saves some 217, or about, derefences of priv->fops. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Clean up llt_init() APIJes Sorensen
Remove last_tx_page argument from the llt_init() function. The rtl8xxxu_fileops structure contains the correct TX_TOTAL_PAGE_NUM value for the device, and rtl8xxxu_auto_llt_table() doesn't need to know the value in the first place. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Fix off by one error calculating pubqJes Sorensen
This was detected tracing the 8188eu driver, but doesn't seem to make any difference when using it. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: code rearrangement in mwifiex_usb_host_to_card()Amitkumar Karwar
This patch helps get rid of goto statement and improves readability. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: fix race condition causing tx timeoutCathy Luo
It's been observed that in a corner case mwifiex_usb_tx_complete() gets called before we exit from mwifiex_usb_host_to_card() after submitting the urb. 'data_sent' flag remains set in this case. It blocks further Tx packets and triggers watchdog timeout. The problem is fixed by setting data_sent and port_block flag at correct place. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: fix kernel crash for USB chipsetsCathy Luo
Following crash issue is observed during TCP traffic stress test [ 2253.625439] NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kworker/u17:1:5191] [ 2253.625520] Call Trace: [ 2253.625527] [<ffffffffc0b47030>] ? moal_spin_lock+0x30/0x30 [usb8xxx] [ 2253.625533] [<ffffffffc0ac3ceb>] ? wlan_wmm_lists_empty+0xb/0xf0 [mlan] [ 2253.625537] [<ffffffffc0ab0ea3>] mlan_main_process+0x1b3/0x720 [mlan] [ 2253.625540] [<ffffffffc0b337f5>] woal_main_work_queue+0x45/0x80 [usb8xxx] [ 2253.625543] [<ffffffff8108aaf0>] process_one_work+0x150/0x3f0 [ 2253.625545] [<ffffffff8108b1e1>] worker_thread+0x121/0x520 [ 2253.625547] [<ffffffff8108b0c0>] ? rescuer_thread+0x330/0x330 [ 2253.625549] [<ffffffff81090222>] kthread+0xd2/0xf0 [ 2253.625551] [<ffffffff81090150>] ? kthread_create_on_node+0x1c0/0x1c0 [ 2253.625553] [<ffffffff8179423c>] ret_from_fork+0x7c/0xb0 [ 2253.625555] [<ffffffff81090150>] ? kthread_create_on_node+0x1c0/0x1c0 In mwifiex_usb_tx_complete(), we are updating port->block_status first and then freeing the skb attached to that URB. We may end up attaching new skb to URB in a corner case and same will be freed. This results in the kernel crash. The problem is solved by changing the sequence. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: simplify mapping of auth typeHante Meuleman
The 802.11 standard only has four valid auth type configurations of which our firmware only supports two, ie. Open System and Shared Key. Simplify the mapping falling back to automatic for other types specified by user-space. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix out of bound access on clearing wowl wake indicatorHante Meuleman
Clearing the wowl wakeindicator happens with a rather odd construction where the string "clear" is used to set the iovar wowl_wakeind. This was implemented incorrectly as it caused an out of bound access. Use an intermediate variable of correct length and copy string in that. Problem was found using coverity. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix clearing entry IPv6 addressHante Meuleman
When IPv6 address is to be cleared there is a possible out of bound access. But also the clearing of the last entry and the adjustment of total number of stored IPv6 addresses is not updated. This patch fixes that bug. Bug was found using coverity. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: remove unnecessary null pointer checkHante Meuleman
in the function brcmf_bus_start() in the exception handling a check is made to dermine whether ifp is null, though this is not possible. Removing the unnessary check. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: remove worker from .ndo_set_mac_address() callbackArend Van Spriel
As it turns out there is no need to use a worker for the callback because it is not called from atomic context. Reported-by: Dan Williams <dcbw@redhat.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: initialize variable in brcmf_sdiod_regrl()Arend Van Spriel
In case of an error the variable returned is uninitialized. The caller will probably check the error code before using it, but better assure it is set to zero. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix memory leak in brcmf_flowring_add_tdls_peer()Arend Van Spriel
In the error paths in brcmf_flowring_add_tdls_peer() the allocated resource should be freed. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: rework pointer trickery in brcmf_proto_bcdc_query_dcmd()Arend Van Spriel
The variable info is assigned to point to bcdc->msg[1], which is the same as pointing to bcdc->buf. As that is what we want to access make it clear by fixing the assignment. This also avoid out-of-bounds errors from static analyzers are bcdc->msg[1] is not in the structure definition. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: ignore 11d configuration errorsHante Meuleman
802.11d is not always supported by firmware anymore. Currently the AP configuration of 11d will cause an abort if the ioctl set is failing. This behavior is not correct and the error should be ignored. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: cfg80211 set_default_mgmt_key handlerGanapathi Bhat
Previously device used to start using IGTK key as Tx key as soon as it gets downloaded in add_key(). This patch implements set_default_mgmt_key handler. We will update Tx key ID in set_default_mgmt_key(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: wl18xx: Use chip specific configuration firmwareTony Lindgren
Use the wl18xx specific config firmware we now have available. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: Fix config firmware loading issuesTony Lindgren
Booting multiple wl12xx and wl18xx devices using the same rootfs is a pain. You currently have to symlink the right nvs file depending on the wl12xx type. For example, with wl1271-nvs.bin being a symlink to wl127x-nvs.bin by default and trying to bring up a wl128x based device: wlcore: ERROR nvs size is not as expected: 1113 != 912 wlcore: ERROR NVS file is needed during boot wlcore: ERROR NVS file is needed during boot wlcore: ERROR firmware boot failed despite 3 retries Note that wl18xx uses a separate config firmware wl18xx-conf.bin that can be generated with tools using the following two git repos: git.ti.com/wilink8-wlan/18xx-ti-utils git.ti.com/wilink8-wlan/wl18xx_fw So let's not configure the nvs file for wl18xx as it's not needed AFAIK. If it turns out that we also need the nvs file for wl18xx, we can just add it to the config firmware data for wl18xx. Let's fix the issue by using the chip specific config firmware data, and make sure we produce understandable warnings if something is missing. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: spi: Populate config firmware dataTony Lindgren
Configure the config firmware names and make it available in platform data. Let's also fix the order of the struct wilink_family_data while at it. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: sdio: Populate config firmware dataTony Lindgren
Configure the config firmware names and make it available in platform data. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: Prepare family to fix nvs file handlingTony Lindgren
Move struct wilink_family_data to be available for all TI WLAN variants. And fix familiy typo, it should be just family. Looks like wl12xx use two different nvs.bin files and wl18xx uses a different conf.bin file. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26Merge tag 'iwlwifi-next-for-kalle-2016-09-19-2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * added support for MU-MIMO sniffer * added support for RRM by scan * added support for packet injection * migrate to devm memory allocation handling * some fixes, mostly in DQA and new HW support * other generic cleanups
2016-09-19iwlwifi: pcie: use LIST_HEAD() macroJohannes Berg
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: use LIST_HEAD() macroJohannes Berg
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: set HCMD_NAME for PHY_DB as wellSara Sharon
Currently it is logged as UNKNOWN. Also, 0x6c seems to be the permanent ID for this command, remove incorrect comment and uncomment the command from the commands list. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add mem debugfs entryIdo Yariv
In order to access cached/paged memory, there are a couple of firmware commands (one for UMAC and one for LMAC) that let the host access memory and registers indirectly. Since this is done by the firmware on behalf of the host, even if memory is paged out or cached, the host will retrieve the memory as the firmware sees it (paged out memory will get paged in). Export this mechanism via a debugfs entry for both read and write access. WARNING: This mechanism has no protections at all. Invalid addresses may crash or hang the firmware. Writing to arbitrary memory also comes with no guarantees. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: move AP-specific code to right functionJohannes Berg
There's no need for the common MAC context function to have an if on AP mode, the values can be overridden in the AP-specific function later. Clean that up by adding the full command as a new parameter to the AP-specific function, and doing it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: add new 8265 series PCI IDOren Givon
Add a new PCI ID for the 8265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add debugfs function for clocks diffRoee Zamir
New function, reveals the diff between gp2 and host time. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-05-18 08:03:52 +0000