summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-19net: 8021q: Fix one possible panic caused by BUG_ON in free_netdevGao Feng
The register_vlan_device would invoke free_netdev directly, when register_vlan_dev failed. It would trigger the BUG_ON in free_netdev if the dev was already registered. In this case, the netdev would be freed in netdev_run_todo later. So add one condition check now. Only when dev is not registered, then free it directly. The following is the part coredump when netdev_upper_dev_link failed in register_vlan_dev. I removed the lines which are too long. [ 411.237457] ------------[ cut here ]------------ [ 411.237458] kernel BUG at net/core/dev.c:7998! [ 411.237484] invalid opcode: 0000 [#1] SMP [ 411.237705] [last unloaded: 8021q] [ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6 [ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000 [ 411.237782] RIP: 0010:free_netdev+0x116/0x120 [ 411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297 [ 411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878 [ 411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000 [ 411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801 [ 411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000 [ 411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000 [ 411.239518] FS: 00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000 [ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0 [ 411.240936] Call Trace: [ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q] [ 411.241910] sock_ioctl+0x18b/0x2c0 [ 411.242394] do_vfs_ioctl+0xa1/0x5d0 [ 411.242853] ? sock_alloc_file+0xa6/0x130 [ 411.243465] SyS_ioctl+0x79/0x90 [ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9 [ 411.244425] RIP: 0033:0x7fb69089a357 [ 411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357 [ 411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003 [ 411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999 [ 411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004 [ 411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001 [ 411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0 Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-19cxgb4: notify uP to route ctrlq compl to rdma rspqRaju Rangoju
During the module initialisation there is a possible race (basically race between uld and lld) where neither the uld nor lld notifies the uP about where to route the ctrl queue completions. LLD skips notifying uP as the rdma queues were not created by then (will leave it to ULD to notify the uP). As the ULD comes up, it also skips notifying the uP as the flag FULL_INIT_DONE is not set yet (ULD assumes that the interface is not up yet). Consequently, this race between uld and lld leaves uP unnotified about where to send the ctrl queue completions to, leading to iwarp RI_RES WR failure. Here is the race: CPU 0 CPU1 - allocates nic rx queus - t4_sge_alloc_ctrl_txq() (if rdma rsp queues exists, tell uP to route ctrl queue compl to rdma rspq) - acquires the mutex_lock - allocates rdma response queues - if FULL_INIT_DONE set, tell uP to route ctrl queue compl to rdma rspq - relinquishes mutex_lock - acquires the mutex_lock - enable_rx() - set FULL_INIT_DONE - relinquishes mutex_lock This patch fixes the above issue. Fixes: e7519f9926f1('cxgb4: avoid enabling napi twice to the same queue') Signed-off-by: Raju Rangoju <rajur@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> CC: Stable <stable@vger.kernel.org> # 4.9+ Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-19Merge tag 'mac80211-for-davem-2017-06-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here's just the fix for that ancient bug: * remove wext calling ndo_do_ioctl, since nobody needs that now and it makes the type change easier * use struct iwreq instead of struct ifreq almost everywhere in wireless extensions code * copy only struct iwreq from userspace in dev_ioctl for the wireless extensions, since it's smaller than struct ifreq ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-18ip6_tunnel: Correct tos value in collect_md modeHaishuang Yan
Same as ip_gre, geneve and vxlan, use key->tos as traffic class value. CC: Peter Dawson <petedaws@gmail.com> Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets”) Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16decnet: always not take dst->__refcnt when inserting dst into hash tableWei Wang
In the existing dn_route.c code, dn_route_output_slow() takes dst->__refcnt before calling dn_insert_route() while dn_route_input_slow() does not take dst->__refcnt before calling dn_insert_route(). This makes the whole routing code very buggy. In dn_dst_check_expire(), dnrt_free() is called when rt expires. This makes the routes inserted by dn_route_output_slow() not able to be freed as the refcnt is not released. In dn_dst_gc(), dnrt_drop() is called to release rt which could potentially cause the dst->__refcnt to be dropped to -1. In dn_run_flush(), dst_free() is called to release all the dst. Again, it makes the dst inserted by dn_route_output_slow() not able to be released and also, it does not wait on the rcu and could potentially cause crash in the path where other users still refer to this dst. This patch makes sure both input and output path do not take dst->__refcnt before calling dn_insert_route() and also makes sure dnrt_free()/dst_free() is called when removing dst from the hash table. The only difference between those 2 calls is that dnrt_free() waits on the rcu while dst_free() does not. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16ip6_tunnel: fix potential issue in __ip6_tnl_rcvHaishuang Yan
When __ip6_tnl_rcv fails, the tun_dst won't be freed, so call dst_release to free it in error code path. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") CC: Alexei Starovoitov <ast@fb.com> Tested-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16ip_tunnel: fix potential issue in ip_tunnel_rcvHaishuang Yan
When ip_tunnel_rcv fails, the tun_dst won't be freed, so call dst_release to free it in error code path. Fixes: 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.") Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Tested-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge tag 'mlx5-fixes-2017-06-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox mlx5 fixes 2017-06-14 This series contains some fixes for the mlx5 core and netdev driver. Please pull and let me know if there's any problem. For -stable: ("net/mlx5: Wait for FW readiness before initializing command interface") kernels >= 4.4 ("net/mlx5e: Fix timestamping capabilities reporting") kernels >= 4.5 ("net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it") kernels >= 4.9 ("net/mlx5e: Fix min inline value for VF rep SQs") kernels >= 4.11 The "net/mlx5e: Fix min inline .." (a oneliner patch) doesn't cleanly apply to 4.11, it hits a contextual conflict and can be easily resolved by: + mlx5_query_min_inline(mdev, &priv->params.tx_min_inline_mode); to the end of mlx5e_build_rep_netdev_priv. Note the 2nd parameter of mlx5_query_min_inline is slightly different from the original one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx5e: Avoid doing a cleanup call if the profile doesn't have itOr Gerlitz
The error flow of mlx5e_create_netdev calls the cleanup call of the given profile without checking if it exists, fix that. Currently the VF reps don't register that callback and we crash if getting into error -- can be reproduced by the user doing ctrl^C while attempting to change the sriov mode from legacy to switchdev. Fixes: 26e59d8077a3 '(net/mlx5e: Implement mlx5e interface attach/detach callbacks') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Sabrina Dubroca <sdubroca@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15net/mlx5e: Remove TC header re-write offloading of ip tosOr Gerlitz
Currently the firmware API is partial and allows to offload only the dscp part of the tos, also, ipv6 support isn't there yet. As such, remove the offloading option of ipv4 dscp till the FW APIs are more comprehensive. Fixes: d79b6df6b10a ('net/mlx5e: Add parsing of TC pedit actions to HW format') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15net/mlx5: Properly check applicability of devlink eswitch commandsOr Gerlitz
Currently we don't check that the link type is Eth and hence crash on IB ports when attempting to deref esw->xxx, fix that. To avoid repeating this check over and over, put the existing checks and the one on link type in a single helper. Fixes: 7768d1971de6 ('net/mlx5: E-Switch, Add control for encapsulation') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Mohamad Badarnah <mohamadb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15net/mlx5e: Fix min inline value for VF rep SQsChris Mi
The offending commit only changed the code path for PF/VF, but it didn't take care of VF representors. As a result, since params->tx_min_inline_mode for VF representors is kzalloced to 0 (MLX5_INLINE_MODE_NONE), all VF reps SQs were set to that mode. This actually works on CX5 by default but broke CX4. Fix that by adding a call to query the min inline mode from the VF rep build up code. Fixes: a6f402e49901 ("net/mlx5e: Tx, no inline copy on ConnectX-5") Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15net/mlx5e: Fix timestamping capabilities reportingMaor Dickman
Misuse of (BIT) macro caused to report wrong flags for "Hardware Transmit Timestamp Modes" and "Hardware Receive Filter Modes" Fixes: ef9814deafd0 ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by: Maor Dickman <maord@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15net/mlx5: Wait for FW readiness before initializing command interfaceEli Cohen
Before attempting to initialize the command interface we must wait till the fw_initializing bit is clear. If we fail to meet this condition the hardware will drop our configuration, specifically the descriptors page address. This scenario can happen when the firmware is still executing an FLR flow and did not finish yet so the driver needs to wait for that to finish. Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15Doc: net: dsa: b53: update location of referenced dsa.txtxypron.glpk@gmx.de
The referenced file dsa.txt is located at Documentation/devicetree/bindings/net/dsa/dsa.txt Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15sctp: return next obj by passing pos + 1 into sctp_transport_get_idxXin Long
In sctp_for_each_transport, pos is used to save how many objs it has dumped. Now it gets the last obj by sctp_transport_get_idx, then gets the next obj by sctp_transport_get_next. The issue is that in the meanwhile if some objs in transport hashtable are removed and the objs nums are less than pos, sctp_transport_get_idx would return NULL and hti.walker.tbl is NULL as well. At this moment it should stop hti, instead of continue getting the next obj. Or it would cause a NULL pointer dereference in sctp_transport_get_next. This patch is to pass pos + 1 into sctp_transport_get_idx to get the next obj directly, even if pos > objs nums, it would return NULL and stop hti. Fixes: 626d16f50f39 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15rxrpc: Fix several cases where a padded len isn't checked in ticket decodeDavid Howells
This fixes CVE-2017-7482. When a kerberos 5 ticket is being decoded so that it can be loaded into an rxrpc-type key, there are several places in which the length of a variable-length field is checked to make sure that it's not going to overrun the available data - but the data is padded to the nearest four-byte boundary and the code doesn't check for this extra. This could lead to the size-remaining variable wrapping and the data pointer going over the end of the buffer. Fix this by making the various variable-length data checks use the padded length. Reported-by: 石磊 <shilei-c@360.cn> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.c.dionne@auristor.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ipv6: fix calling in6_ifa_hold incorrectly for dad workXin Long
Now when starting the dad work in addrconf_mod_dad_work, if the dad work is idle and queued, it needs to hold ifa. The problem is there's one gap in [1], during which if the pending dad work is removed elsewhere. It will miss to hold ifa, but the dad word is still idea and queue. if (!delayed_work_pending(&ifp->dad_work)) in6_ifa_hold(ifp); <--------------[1] mod_delayed_work(addrconf_wq, &ifp->dad_work, delay); An use-after-free issue can be caused by this. Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in net6_ifa_finish_destroy was hit because of it. As Hannes' suggestion, this patch is to fix it by holding ifa first in addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if the dad_work is already in queue. Note that this patch did not choose to fix it with: if (!mod_delayed_work(delay)) in6_ifa_hold(ifp); As with it, when delay == 0, dad_work would be scheduled immediately, all addrconf_mod_dad_work(0) callings had to be moved under ifp->lock. Reported-by: Wei Chen <weichen@redhat.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) The netlink attribute passed in to dev_set_alias() is not necessarily NULL terminated, don't use strlcpy() on it. From Alexander Potapenko. 2) Fix implementation of atomics in arm64 bpf JIT, from Daniel Borkmann. 3) Correct the release of netdevs and driver private data in certain circumstances. 4) Sanitize netlink message length properly in decnet, from Mateusz Jurczyk. 5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From Yuval Mintz. 6) Hash secret is never initialized in ipv6 ILA translation code, from Arnd Bergmann. I guess those clang warnings about unused inline functions are useful for something! 7) Fix endian selection in bpf_endian.h, from Daniel Borkmann. 8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX and CAIF. From Mateusz Jurczyk. 9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario Molitor. 10) Do not leak netdev on dev_alloc_name() errors in mac80211, from Johannes Berg. 11) Fix locking in sctp_for_each_endpoint(), from Xin Long. 12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle. 13) Fix use after free in ip_mc_clear_src(), from WANG Cong. 14) Fix regressions caused by ICMP rate limiting changes in 4.11, from Jesper Dangaard Brouer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) i40e: Fix a sleep-in-atomic bug net: don't global ICMP rate limit packets originating from loopback net/act_pedit: fix an error code net: update undefined ->ndo_change_mtu() comment net_sched: move tcf_lock down after gen_replace_estimator() caif: Add sockaddr length check before accessing sa_family in connect handler qed: fix dump of context data qmi_wwan: new Telewell and Sierra device IDs net: phy: Fix MDIO_THUNDER dependencies netconsole: Remove duplicate "netconsole: " logging prefix igmp: acquire pmc lock for ip_mc_clear_src() r8152: give the device version net: rps: fix uninitialized symbol warning mac80211: don't send SMPS action frame in AP mode when not needed mac80211/wpa: use constant time memory comparison for MACs mac80211: set bss_info data before configuring the channel mac80211: remove 5/10 MHz rate code from station MLME mac80211: Fix incorrect condition when checking rx timestamp mac80211: don't look at the PM bit of BAR frames i40e: fix handling of HW ATR eviction ...
2017-06-15Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug on sparc where we may dereference freed stack memory" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Work around deallocated stack frame reference gcc bug on sparc.
2017-06-15Merge tag 'acpi-4.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert an ACPICA commit from the 4.11 cycle that causes problems to happen on some systems and add a protection against possible kernel crashes due to table reference counter imbalance. Specifics: - Revert a 4.11 ACPICA change that made assumptions which are not satisfied on some systems and caused the enumeration of resources to fail on them (Rafael Wysocki). - Add a mechanism to prevent tables from being unmapped prematurely due to reference counter overflows (Lv Zheng)" * tag 'acpi-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
2017-06-15Merge tag 'pm-4.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These revert a recent cpufreq schedutil governor change that turned out to be problematic and fix a few minor issues in cpufreq, cpuidle and the Exynos devfreq drivers. Specifics: - Revert a recent cpufreq schedutil governor change that caused some systems to behave undesirably (Rafael Wysocki). - Fix a cpufreq conservative governor issue introduced during the 3.10 cycle that prevents it from working as expected in some situations (Tomasz Wilczyński). - Fix an error code path in the generic cpuidle driver for DT-based systems (Christophe Jaillet). - Fix three minor issues in devfreq drivers for Exynos (Arvind Yadav, Krzysztof Kozlowski)" * tag 'pm-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: dt: Add missing 'of_node_put()' cpufreq: conservative: Allow down_threshold to take values from 1 to 10 Revert "cpufreq: schedutil: Reduce frequencies slower" PM / devfreq: exynos-ppmu: Staticize event list PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
2017-06-15Merge branch 'for-4.12/driver-matching-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fix from Jiri Kosina: - ifdef-based bandaid for a long-standing issue with HID driver matching, avoiding regressions in cases where specific driver is not enabled in kernel .config, from Jiri Kosina * 'for-4.12/driver-matching-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: let generic driver yield control iff specific driver has been enabled
2017-06-15Merge tag 'media/v4.12-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some build dependency issues at CEC core with randconfigs - fix an off by one error at vb2 - a race fix at cec core - driver fixes at tc358743, sir_ir and rainshadow-cec * tag 'media/v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED [media] cec: race fix: don't return -ENONET in cec_receive() [media] sir_ir: infinite loop in interrupt handler [media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE [media] cec: improve MEDIA_CEC_RC dependencies [media] vb2: Fix an off by one error in 'vb2_plane_vaddr' [media] rainshadow-cec: Fix missing spin_lock_init() [media] tc358743: fix register i2c_rd/wr function fix
2017-06-14i40e: Fix a sleep-in-atomic bugJia-Ju Bai
The driver may sleep under a spin lock, and the function call path is: i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh) i40e_vsi_remove_pvid i40e_vlan_stripping_disable i40e_aq_update_vsi_params i40e_asq_send_command mutex_lock --> may sleep To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and the lock is acquired again after this function. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge branch 'acpica-fixes'Rafael J. Wysocki
* acpica-fixes: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
2017-06-15Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: conservative: Allow down_threshold to take values from 1 to 10 Revert "cpufreq: schedutil: Reduce frequencies slower" * pm-cpuidle: cpuidle: dt: Add missing 'of_node_put()' * pm-devfreq: PM / devfreq: exynos-ppmu: Staticize event list PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
2017-06-14net: don't global ICMP rate limit packets originating from loopbackJesper Dangaard Brouer
Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by: Florian Weimer <fweimer@redhat.com> Reported-by: "H.J. Lu" <hjl.tools@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14net/act_pedit: fix an error codeDan Carpenter
I'm reviewing static checker warnings where we do ERR_PTR(0), which is the same as NULL. I'm pretty sure we intended to return ERR_PTR(-EINVAL) here. Sometimes these bugs lead to a NULL dereference but I don't immediately see that problem here. Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14net: update undefined ->ndo_change_mtu() commentMagnus Damm
Update ->ndo_change_mtu() callback comment to remove text about returning error in case of undefined callback. This change makes the comment match the existing code behavior. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14net_sched: move tcf_lock down after gen_replace_estimator()WANG Cong
Laura reported a sleep-in-atomic kernel warning inside tcf_act_police_init() which calls gen_replace_estimator() with spinlock protection. It is not necessary in this case, we already have RTNL lock here so it is enough to protect concurrent writers. For the reader, i.e. tcf_act_police(), it needs to make decision based on this rate estimator, in the worst case we drop more/less packets than necessary while changing the rate in parallel, it is still acceptable. Reported-by: Laura Abbott <labbott@redhat.com> Reported-by: Nick Huber <nicholashuber@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14dev_ioctl: copy only the smaller struct iwreq for wextJohannes Berg
Unfortunately, struct iwreq isn't a proper subset of struct ifreq, but is still handled by the same code path. Robert reported that then applications may (randomly) fault if the struct iwreq they pass happens to land within 8 bytes of the end of a mapping (the struct is only 32 bytes, vs. struct ifreq's 40 bytes). To fix this, pull out the code handling wireless extension ioctls and copy only the smaller structure in this case. This bug goes back a long time, I tracked that it was introduced into mainline in 2.1.15, over 20 years ago! This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195869 Reported-by: Robert O'Callahan <robert@ocallahan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-14wireless: wext: use struct iwreq earlier in the call chainJohannes Berg
To make it clear that we never use struct ifreq, cast from it directly in the wext entrypoint and use struct iwreq from there on. The next patch will remove the cast again and pass the correct struct from the beginning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-14wireless: wext: remove ndo_do_ioctl fallbackJohannes Berg
There are no longer any drivers (in the tree proper, I didn't check all the staging drivers) that take WEXT ioctls through this API, the only remaining ones that even have ndo_do_ioctl are using it only for private ioctls. Therefore, we can remove this call. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13caif: Add sockaddr length check before accessing sa_family in connect handlerMateusz Jurczyk
Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in the connect() handler of the AF_CAIF socket. Since the syscall doesn't enforce a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing sa_family. Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13Merge tag 'batadv-net-for-davem-20170613' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - fix rx packet counters for local ARP replies, by Sven Eckelmann - fix memory leaks for unicast packetes received from another gateway in bridge loop avoidance, by Andreas Pape ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13Merge tag 'mac80211-for-davem-2017-06-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Some fixes: * Avi fixes some fallout from my mac80211 RX flags changes * Emmanuel fixes an issue with adhering to the spec, and an oversight in the SMPS management code * Jason's patch makes mac80211 use constant-time memory comparisons for message authentication, to avoid having potentially observable timing differences * my fix makes mac80211 set the basic rates bitmap before the channel so the next update to the driver has more consistent data - this required another rework patch to remove some useless 5/10 MHz code that can never be hit ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13qed: fix dump of context dataTayar, Tomer
Currently when dumping a context data only word number '1' is read for the entire context. Fixes: c965db444629 ("qed: Add support for debug data collection") Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13qmi_wwan: new Telewell and Sierra device IDsBjørn Mork
A new Sierra Wireless EM7305 device ID used in a Toshiba laptop, and two Longcheer device IDs entries used by Telewell TW-3G HSPA+ branded modems. Reported-by: Petr Kloc <petr_kloc@yahoo.com> Reported-by: Teemu Likonen <tlikonen@iki.fi> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: phy: Fix MDIO_THUNDER dependenciesFlorian Fainelli
After commit 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") we could create a configuration where MDIO_DEVICE=y and PHYLIB=m which leads to the following undefined references: drivers/built-in.o: In function `thunder_mdiobus_pci_remove': >> mdio-thunder.c:(.text+0x2a212f): undefined reference to >> `mdiobus_unregister' >> mdio-thunder.c:(.text+0x2a2138): undefined reference to >> `mdiobus_free' drivers/built-in.o: In function `thunder_mdiobus_pci_probe': mdio-thunder.c:(.text+0x2a22e7): undefined reference to `devm_mdiobus_alloc_size' mdio-thunder.c:(.text+0x2a236f): undefined reference to `of_mdiobus_register' Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13netconsole: Remove duplicate "netconsole: " logging prefixJoe Perches
It's already added by pr_fmt so remove the explicit use. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13igmp: acquire pmc lock for ip_mc_clear_src()WANG Cong
Andrey reported a use-after-free in add_grec(): for (psf = *psf_list; psf; psf = psf_next) { ... psf_next = psf->sf_next; where the struct ip_sf_list's were already freed by: kfree+0xe8/0x2b0 mm/slub.c:3882 ip_mc_clear_src+0x69/0x1c0 net/ipv4/igmp.c:2078 ip_mc_dec_group+0x19a/0x470 net/ipv4/igmp.c:1618 ip_mc_drop_socket+0x145/0x230 net/ipv4/igmp.c:2609 inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:411 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1072 This happens because we don't hold pmc->lock in ip_mc_clear_src() and a parallel mr_ifc_timer timer could jump in and access them. The RCU lock is there but it is merely for pmc itself, this spinlock could actually ensure we don't access them in parallel. Thanks to Eric and Long for discussion on this bug. Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13r8152: give the device versionOliver Neukum
Getting the device version out of the driver really aids debugging. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: rps: fix uninitialized symbol warningAshwanth Goli
This patch fixes uninitialized symbol warning that got introduced by the following commit 773fc8f6e8d6 ("net: rps: send out pending IPI's on CPU hotplug") Signed-off-by: Ashwanth Goli <ashwanth@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13HID: let generic driver yield control iff specific driver has been enabledJiri Kosina
There are many situations where generic HID driver provides some basic level of support for certain device, but later this support (usually by implementing vendor-specific extensions of HID protocol) is extended and the support moved over to a separate (usually per-vendor) specific driver. This might bring a rather unpleasant suprise for users, as all of a sudden there is a new config option they have to enable in order to get any support for their device whatsoever, although previous kernel versions provided basic support through the generic driver. Which is rightfully seen as a regression. Fix this by including the entry for a particular device in hid_have_special_driver[] iff the specific config option has been specified, and let generic driver handle the device otherwise. Also make the behavior of hid_scan_report() (where the same decision is being taken on a per-report level) consistent. While at it, reshuffle the hid_have_special_driver[] a bit to restore the alphabetical ordering (first order by config option, and within those sections order by VID). This is considered a short-term solution, before generic way of giving precedence to special drivers and falling back to generic driver is figured out. While at it, fixup a missing entry for GFRM driver; thanks to Hans de Geode for spotting this (and for discovering a few issues in the conversion). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-06-13mac80211: don't send SMPS action frame in AP mode when not neededEmmanuel Grumbach
mac80211 allows to modify the SMPS state of an AP both, when it is started, and after it has been started. Such a change will trigger an action frame to all the peers that are currently connected, and will be remembered so that new peers will get notified as soon as they connect (since the SMPS setting in the beacon may not be the right one). This means that we need to remember the SMPS state currently requested as well as the SMPS state that was configured initially (and advertised in the beacon). The former is bss->req_smps and the latter is sdata->smps_mode. Initially, the AP interface could only be started with SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF always. Later, a nl80211 API was added to be able to start an AP with a different AP mode. That code forgot to update bss->req_smps and because of that, if the AP interface was started with SMPS_DYNAMIC, we had: sdata->smps_mode = SMPS_DYNAMIC bss->req_smps = SMPS_OFF That configuration made mac80211 think it needs to fire off an action frame to any new station connecting to the AP in order to let it know that the actual SMPS configuration is SMPS_OFF. Fix that by properly setting bss->req_smps in ieee80211_start_ap. Fixes: f69931748730 ("mac80211: set smps_mode according to ap params") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211/wpa: use constant time memory comparison for MACsJason A. Donenfeld
Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: set bss_info data before configuring the channelJohannes Berg
When mac80211 changes the channel, it also calls into the driver's bss_info_changed() callback, e.g. with BSS_CHANGED_IDLE. The driver may, like iwlwifi does, access more data from bss_info in that case and iwlwifi accesses the basic_rates bitmap, but if changing from a band with more (basic) rates to one with fewer, an out-of-bounds access of the rate array may result. While we can't avoid having invalid data at some point in time, we can avoid having it while we call the driver - so set up all the data before configuring the channel, and then apply it afterwards. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195677 Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Debugged-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: remove 5/10 MHz rate code from station MLMEJohannes Berg
There's no need for the station MLME code to handle bitrates for 5 or 10 MHz channels when it can't ever create such a configuration. Remove the unnecessary code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: Fix incorrect condition when checking rx timestampAvraham Stern
If the driver reports the rx timestamp at PLCP start, mac80211 can only handle legacy encoding, but the code checks that the encoding is not legacy. Fix this. Fixes: da6a4352e7c8 ("mac80211: separate encoding/bandwidth from flags") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2024-07-02 22:25:41 +0000