summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-28Merge tag 'v5.1-next-dts64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - use assinged-clocks and assigned-clock-parents - fix compatible for SoC to a72 - add pmu nodes mt8183: - add sysirq binding - add pinctrl dt header file mt7629: - update bindings description fo sysirq, uart and scpsys mt8516: - add binding description for watchdog, timer, uart and sysirq * tag 'v5.1-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8173: add pmu nodes for mt8173 arm64: dts: mt8173: correct cpu type of cpu2 and cpu3 to cortex-a72 dt-bindings: irq: mtk,sysirq: add support for MT8516 dt-bindings: serial: mtk-uart: add support for MT8516 dt-bindings: timer: mtk-timer: add support for MT8516 dt-bindings: wdog: mtk-wdt: add support for MT851 dt-bindings: soc: fix a typo for MT7623A dt-bindings: mediatek: update bindings for MT7629 SoC arm64: dts: mt8183: add pinctrl file dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183 arm64: dts: Using standard CCF interface to set vcodec clk Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" propertiesRobin Murphy
The old "cooling-{min,max}-state" properties for thermal bindings were ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level"), which were later removed entirely by commit e04907dbc259 ("dt-bindings: thermal: Remove "cooling-{min|max}-level" properties"). The pwm-fan binding, however, was apparently in-flight in parallel with that ratification, and so managed to introduce an example of the old properties which escaped the scope of the later cleanup and has thus continued to be dutifully copied for new boards despite being useless. Clean up these remaining undocumented anachronisms to minimise any further confusion. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt64 for 5.2 (part 1) Add wlan_disable signal hog for rfkill signal on clearfog-gt-8k (Armada 8040 based board) * tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu: arm64: dts: clearfog-gt-8k: add wlan_disable signal hog Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt for 5.2 (part 1) - Add interrupt support for wathdog on Armada 38x * tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: add interrupts for watchdog Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge branch 'at91-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt * 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91-vinco: use SPDX-License-Identifier ARM: dts: atmel boards: use SPDX-License-Identifier ARM: dts: at91sam9xe: use SPDX-License-Identifier ARM: dts: sama5d{2,4}: use SPDX-License-Identifier ARM: dts: at91: sama5d2_xplained: Add proper regulator states for suspend-to-mem ARM: dts: at91: sama5d2: add labels to soc dtsi for derivative boards Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-dts-for-5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.2 * Add gpio ranges for Qualcomm platforms * Correct the IPQ4019 PCIe BAR range * tag 'qcom-dts-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: ipq4019: enlarge PCIe BAR range ARM: dts: qcom: pma8084: add gpio-ranges ARM: dts: qcom: msm8660: add gpio-ranges ARM: dts: qcom: mdm9615: add gpio-ranges ARM: dts: qcom: apq8064: add gpio-ranges Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-arm64-for-5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.2 * Add gpio ranges for Qualcomm platforms * Fix MSM8998 BLSP2 I2C5 address * Add MSM8998 UFS nodes and associated information * Add SDM845 interconnect header and usage * Add ADSP and CDSP PAS, RMTFS memory, and UFS phy reset on SDM845 * Update reserved memory map on SDM845 * Add QCS404 spmi regulators, ethernet, bluetooth, and uart3 * Remove remotely-controlled property as default for BAM on QCS404 * Add spmi regulators on PMS405 * Fixup QCS404 l3 voltages and regulator supply names * Fixup thermal trip names on Qualcomm platforms * Add thermal sensors on Qualcomm platforms * Remove invalid efficiency property on MSM8998 * Change QCS404-evb compatible to help distinguish platforms * Add rpmhd header file and convert to use definitions on SDM845 * Add interconnect header file on SDM845 * Add PMS405 ADC binding * tag 'qcom-arm64-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits) arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes arm64: dts: qcom: sdm845: Define rmtfs memory arm64: dts: qcom: sdm845: Update reserved memory map arm64: dts: sdm845: Add UFS PHY reset arm64: dts: qcom: msm8998: Fix blsp2_i2c5 address arm64: dts: qcom: qcs404-evb: Change the compatible to distinguish platforms arm64: dts: qcom: pmi8998: add gpio-ranges arm64: dts: qcom: pmi8994: add gpio-ranges arm64: dts: qcom: pm8998: add gpio-ranges arm64: dts: qcom: pm8005: add gpio-ranges arm64: dts: msm8998: Add UFS phy reset arm64: dts: msm8916: thermal: Convert camera trip type to hot arm64: dts: msm8996: thermal: Make trip names consistent arm64: dts: msm8916: thermal: Make trip names consistent arm64: dts: msm8998: thermal: Make trip names consistent arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals arm64: dts: msm8998: thermal: GPU has two sensors, add the second arm64: dts: msm8998: thermal: Fix the gpu sensor number arm64: dts: msm8998: thermal: Fix the cpu sensor numbers ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-dt-5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm device tree update for 5.2: - New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann, imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4. - Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL. - Use new 'reset-gpios' property describing CODEC reset pin for board mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart. - Specify viewport count for PCIE block on SoC imx7d and imx6qdl. - Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs. - Rename MMDC memory controller device to be generic and add MMDC device for imx7ulp SoC. - Add OCOTP device support for imx7ulp SoC. - Improve ZII board DTS by switching to SPDX identifier and using generic device node name. - A series from Rui Miguel Silva to add various media related devices for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board. - Random small updates on various board support. * tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (59 commits) ARM: dts: imx7s: Specify #io-channel-cells in ADC nodes ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0 ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAIN ARM: dts: Add support for ZII i.MX7 RPU2 board ARM: dts: bugfix tqma7 soft reset issue ARM: dts: imx53: Add Menlosystems M53 board ARM: dts: imx53: Rename M53 SoM touchscreen node ARM: dts: imx6dl-sabreauto: update opp table for auto part ARM: dts: imx: Use generic node names for Zii dts ARM: dts: imx: Switch Zii dts to SPDX identifier ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend ARM: dts: imx6q-logicpd: Enable Analog audio capture ARM: dts: imx6sll: add cooling-cells for cpu-freq cooling device ARM: dts: imx50: Add Kobo Aura DTS ARM: dts: imx6qdl-var-dart: Use new CODEC reset pin name ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-bindings-5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.2: - Add vendor prefix for TQ Systems GmbH, Rakuten Kobo and Menlo Systems GmbH. - Add DT schema for SoC i.MX8MM and i.MX50, and board ZII VF610, VF610 SPB4, i.MX7 RPU2, i.MX7S TQ MBa7, M53 Menlo and Eckelmann ci4x10. - Update imx-scu bindings on resource table and general interrupt support. - Add bindings for i.MX MMDC memory controller. - Update i.MX7D ADC bindings to add missing '#io-channel-cells' property. * tag 'imx-bindings-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: iio: imx7d-adc: Add #io-channel-cells to required dt-bindings: arm: fsl: Add support for ZII i.MX7 RPU2 board dt-bindings: arm: fsl: Add devicetree binding for M53 Menlo board. dt-bindings: fsl: scu: add general interrupt support dt-bindings: arm: fsl: Add i.MX50 based boards dt-bindings: Add vendor prefix for Rakuten Kobo, Inc. dt-bindings: arm: add TQ boards dt-bindings: add vendor prefix for TQ Systems GmbH dt-bindings: arm: fsl: Add support for ZII VF610 SPB4 dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema dt-bindings: arm: imx: Add the soc binding for imx8mm dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10 dt-bindings: memory-controllers: freescale: add MMDC binding doc of: Add vendor prefix for Menlo Systems GmbH bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string dt-bindings: firmware: imx-scu: add new resources to scu resource table dt-bindings: firmware: imx-scu: remove unused resources from scu resource table Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt64-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.2, round 2 - add display/gfx support for G12a boards - enable USB for g12a boards * tag 'amlogic-dt64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits) arm64: dts: meson-g12a-u200: Add support for Video Display arm64: dts: meson-g12a-sei510: Add support for Video Display arm64: dts: meson-g12a-x96-max: Add support for Video Display arm64: dts: meson-g12a: Add AO-CEC nodes arm64: dts: meson-g12a: Add VPU and HDMI related nodes arm64: dts: meson-g12a-x96-max: Enable USB arm64: dts: meson-g12a-u200: Enable USB arm64: dts: meson-g12a-sei510: Enable USB arm64: dts: meson-g12a-sei510: Add ADC Key and BT support arm64: dts: meson-g12a-u200: add regulators arm64: dts: meson: g12a: Add mali-g31 gpu node arm64: dts: meson: g12a: Add G12A USB nodes arm64: dts: meson: g12a: Add SAR ADC node dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible arm64: dts: meson-gxm: Add Mali-T820 node dt-bindings: gpu: mali-midgard: Add resets property dt-bindings: clock: meson8b: export the video decoder clocks dt-bindings: clock: meson8b: export the VPU clock dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN dt-bindings: clock: meson8b: drop the "ABP" clock definition ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2, round 2 - enable RTC on odroid-c1, ec100 - meson8: add internal clock measurer * tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroid-c1: prepare support for the RTC ARM: dts: meson8b: ec100: enable the RTC ARM: dts: meson: add support for the RTC Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-dt-bindings-for-v5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Bindings Updates for v5.2 * R-Car M3-N (r8a77965) SoC - Remove non-existent A3IR power domain * Add vendor prefix for Silicon Linux * tag 'renesas-dt-bindings-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: power: r8a77965: Remove non-existent A3IR power domain dt-bindings: Add vendor prefix for Silicon Linux. Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm-dt-for-v5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.2 * R-Car E2 (r8a7794) based Alt board - Enable USB and DA9063 PMIC * R-Car V2H (R8A77920) based Blanche board - Enable IIC3 and DA9063 PMIC * RZ/G1C (r8a77470) based iWave SBC - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB * RZ/G1C (r8a77470) SoC - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT * RZ/A1H (R7S7210) based rskrza1 board - Enable remaining LEDs and I2C * R-Mobile A1 (r8a7740) based ape6evm, R-Car H1 (r8a7779) based marzen, R-Car M1A (R8A7778) based bockw and Emma Mobile EV2 based kzm9d boads - Tidy up bootargs * R-Mobile A1 (r8a7740) based ape6evm - Enable NOR FLASH * tag 'renesas-arm-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits) ARM: dts: ape6evm: Reorder bootargs ARM: dts: marzen: Add rw to bootargs and use ip=dhcp ARM: dts: bockw: Reorder bootargs ARM: dts: kzm9d: Add rw parameter to bootargs ARM: dts: iwg23s-sbc: Enable HS-USB ARM: dts: r8a77470: Add HSUSB device nodes ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device ARM: dts: iwg23s-sbc: Enable USB Phy[01] ARM: dts: r8a77470: Add USB PHY DT support ARM: dts: r8a77470: Add VIN support ARM: dts: r8a77470: Add PWM support ARM: dts: r8a77470: Add HSCIF support ARM: dts: alt: Enable USB support ARM: dts: rskrza1: Add remaining LEDs ARM: dts: rskrza1: Add I2C support ARM: dts: iwg23s-sbc: Add HDMI support ARM: dts: r8a77470: Add DU support ARM: dts: ape6evm: Add NOR FLASH ARM: dts: alt: Add DA9063 PMIC node ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm64-dt2-for-v5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Second Round of Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) SoCs - Describe CMT devices in DT * R-Car M3-N (r8a77965) SoC - Remove unecessary reg-names of display node * R-Car V3H (r8a77980) SoC - Add missing "renesas,id" property to VIN of device tree * RZ/G2E (r8a774c0) based CAT874 board - Add USB-HOST support * tag 'renesas-arm64-dt2-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77980: Add "renesas,id" to VIN arm64: dts: renesas: r8a77965: Remove reg-names of display node arm64: dts: renesas: r8a77990: Add CMT device nodes arm64: dts: renesas: r8a77965: Add CMT device nodes arm64: dts: renesas: r8a7795: Add CMT device nodes arm64: dts: renesas: cat874: Add USB-HOST support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-h3-h5-for-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3/H5 changes for 5.2 Our usual bunch of changes shared between arm and arm64, the most notable one being: - Fix of improper usage of DT bindings, thanks to the DT validation - Add the SID for the H3 and H5 - New board: RerVision H3-DVK * tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: mapleboard: Remove cd-inverted ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board ARM: dts: sun8i: h3: Add default dr_mode ARM: dts: sun8i: h3: Refactor the pinctrl node names ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry ARM: dts: sunxi: h3/h5: Add device node for SID ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-dt64-for-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner arm64 DT changes for 5.2 Our usual bunch of patches, the most notable one being: - Fixing the DTC warnings - Fix DT bindings not being properly respected, thanks to the DT validation - New Board: Oceanic 5205, Beelink GS1, Orange Pi3 * tag 'sunxi-dt64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits) arm64: dts: allwinner: a64-amarula-relic: Add OV5640 camera node arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1 arm64: dts: allwinner: Fix DE2 bus node name arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI arm64: dts: allwinner: h6: Add MMC1 pins arm64: dts: allwinner: h6: Add Orange Pi 3 DTS arm64: dts: allwinner: h6: Introduce Beelink GS1 board dt-bindings: vendor-prefixes: add AZW arm64: dts: allwinner: h6: move MMC pinctrl to dtsi arm64: dts: allwinner: h6: Add device node for SID arm64: dts: allwinner: a64: Fix the Codec I2S binding arm64: dts: allwinner: a64: Add default dr_mode arm64: dts: allwinner: Fix pinctrl node names arm64: dts: allwinner: a64: Add missing PIO clocks arm64: dts: allwinner: a64: Fix display pipeline endpoints arm64: dts: allwinner: a64: Fix the TCON output clock arm64: dts: allwinner: h6: Add Video Engine node arm64: dts: allwinner: a64: Add cross links for the mixers arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support dt-bindings: Add vendor prefix for oceanic ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-dt-for-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.2 This PR is pretty significant, but it been mostly about: - Fixing the DTC warnings in most of our DT. We're now down to 2 warnings, from several thousands. - Fixing a good number of minor issues, typos, and so on thanks to the DT validation tools - Describe the MBUS controller and the special DMA RAM mapping on the A13 - Add support for the LRADC on the A83t - Add support for the I2C bus used for the PMIC on the A33 - Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes * tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits) ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards ARM: dtsi: axp81x: add USB power supply node ARM: dts: sun5i: Reorder pinctrl nodes ARM: dts: sun6i: i7: Remove useless property ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences. ARM: dts: sun5i: Add the MBUS controller dt-bindings: sunxi: Add compatible for OrangePi 3 board ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins dt-bindings: arm: sunxi: Add Beelink GS1 board ARM: dts: sun8i: tbs-a711: Add support for volume keys input ARM: dts: sunxi: Add R_LRADC support for A83T ARM: dts: sunxi: Improve A33 NAND transfers by using DMA ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module) ARM: dts: sunxi: Remove useless pinctrl nodes ARM: dts: sunxi: Remove pinctrl groups setting bias ARM: dts: sunxi: Remove useless address and size cells ARM: dts: sunxi: Conform to DT spec for NAND controller ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm64-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.2-rc1 This contains a bunch of changes all across the board. Perhaps the most notable introduction here is support for the Jetson Nano Developer Kit. * tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Remove regulator hacks on Jetson TX2 arm64: tegra: Enable XUSB on P2771 arm64: tegra: Add XUSB and pad controller on Tegra186 arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support arm64: tegra: smaug: Move PLL power supplies to XUSB pad controller arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller arm64: tegra: Enable command queue for Tegra186 SDMMC4 arm64: tegra: Fix default tap and trim values arm64: tegra: Add supply for temperature sensor on P2888 arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1 arm64: tegra: Add L2 cache topology to Tegra210 arm64: tegra: Enable CPU idle support for Shield arm64: tegra: Enable CPU idle support for Smaug arm64: tegra: Enable CPU idle support for Jetson TX1 arm64: tegra: Add CPU idle states properties for Tegra210 arm64: tegra: Fix timer node for Tegra210 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.2-rc1 This contains a set of changes to move PLL power supplies to the XUSB pad controller, which is necessary to ensure the proper sequencing during boot. Other patches in this set clean up usage of SPDX license identifiers in device tree files as well as add support for the ACTMON hardware on Tegra30. * tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add ACTMON support on Tegra30 ARM: tegra: venice2: Move PLL power supplies to XUSB pad controller ARM: tegra: nyan: Move PLL power supplies to XUSB pad controller ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controller ARM: tegra: apalis: Move PLL power supplies to XUSB pad controller ARM: tegra: Remove gratuitous parentheses in SPDX license identifier ARM: tegra: Convert to SPDX license tags for Tegra124 Apalis Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-am3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Add am335x pinmux defines and start using them This series of changes adds a new pinmux instance defines for am335x, and a new AM33XX_PADCONF macro. And then the rest of the series updates the dts files to use it. The reasons for doing this is the pinmux configuration has been hard to use and read. And we need to do this for eventually for moving to use values. This change is done one machine at a time, and can be easily reverted as needed in case of unexpected trouble. The old macro is still working, and we're planning to keep it around until we eventually change to use * tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits) ARM: dts: am335x: wega: Replaced register offsets with defines ARM: dts: am335x: sl50: Replaced register offsets with defines ARM: dts: am335x: shc: Replaced register offsets with defines ARM: dts: am335x: sbc-t335: Replaced register offsets with defines ARM: dts: am335x: sancloud-bbe: Replaced register offsets with defines ARM: dts: am335x: phycore-som: Replaced register offsets with defines ARM: dts: am335x: pepper: Replaced register offsets with defines ARM: dts: am335x: pdu001: Replaced register offsets with defines ARM: dts: am335x: pcm-953: Replaced register offsets with defines ARM: dts: am335x: osd335x-common: Replaced register offsets with defines ARM: dts: am335x: osd3358-sm-red: Replaced register offsets with defines ARM: dts: am335x: nano: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-8100-me-t: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2101: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2100-common: Replaced register offsets with defines ARM: dts: am335x: lxm: Replaced register offsets with defines ARM: dts: am335x: igep0033: Replaced register offsets with defines ARM: dts: am335x: icev2: Replaced register offsets with defines ARM: dts: am335x: evmsk: Replaced register offsets with defines ARM: dts: am335x: evm: Replaced register offsets with defines ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'socfpga_dts_updates_for_v5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.2 - Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz * tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA arm64: dts: stratix10: increase QSPI max frequency to 100MHz arm64: dts: stratix10: enable MMC highspeed support ARM: dts: socfpga: enable MMC highspeed support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'ux500-dts-v5.2-armsoc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.2 kernel cycle. - This adds the MCDE display controller and some displays. - The Lima MALI-400 driver is added to the kernel, so let's add this block to the Ux500 DTS file. * tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Ux500: Add MCDE and Samsung display ARM: dts: ux500: Add Mali-400 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap4 and 5 l4 abe interconnect This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place. This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late. * tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits) ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5 ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4 ARM: dts: Add common mcpdm dts file for omap4 bus: ti-sysc: Add generic enable/disable functions ARM: OMAP2+: Drop mcspi platform data for omap4 ARM: OMAP2+: Drop uart platform data for dra7 ARM: OMAP2+: Drop gpio platform data for dra7 ARM: OMAP2+: Drop i2c platform data for dra7 ARM: OMAP2+: Drop mmc platform data for dra7 ARM: OMAP2+: Drop uart platform data for omap5 ARM: OMAP2+: Drop gpio platform data for omap5 ARM: OMAP2+: Drop i2c platform data for omap5 ARM: OMAP2+: Drop mmc platform data for omap5 ARM: OMAP2+: Drop uart platform data for am33xx and am43xx ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx ARM: OMAP2+: Drop mmc platform data for am330x and am43xx ARM: OMAP2+: Drop uart platform data for omap4 ARM: OMAP2+: Drop gpio platform data for omap4 ARM: OMAP2+: Drop i2c platform data for omap4 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap variants This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810. We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss. * tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Separate AM57 dtsi files dt-binding: arm: omap: Add information for AM5748 ARM: dts: omap2420-n810: Use new CODEC reset pin name ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on ARM: dts: dra7: Add properties to enable PCIe x2 lane mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.2 * Hi3660 SoC and related boards: - Added DMA support for the uart nodes - Added the asp DMA controller node - Replaced dma-min-chan with dma-channel-mask to follow the binding * Hi3670 SoC and related boards: - Reused Hi3660 reset to support Hi3670, updated the binding document and added dts node - Reused Hi3660 MMC controller to support Hi3670, updated the binding document and added related nodes to support SD and WiFi for the SoC and hikey970 board - Added UFS controller node * tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: hi3670: Add UFS controller support arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask arm64: dts: hi3660: Add hisi asp dma device arm64: dts: hi3660: Add dma to uart nodes arm64: dts: hisilicon: hikey970: Add SD and WiFi support arm64: dts: hisilicon: hi3670: Add MMC controller support dt-bindings: mmc: Add HI3670 MMC controller binding arm64: dts: hisilicon: hi3670: Add reset controller support dt-bindings: reset: Add HI3670 reset controller binding Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
arm/dt arm64: dts: zynqmp: DT changes for v5.2 - Align xlnx-zynqmp-clk.h file name and separate binding for clock driver - Add TI quirks to zynqmp boards * tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: dt: Add TI PHY quirk dt-bindings: xilinx: Separate clock binding from firmware doc include: dt-binding: clock: Rename zynqmp header file Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt64-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.2 1. Use proper clock rates for GSCALER module on TM2 boards. 2. Add clocks for local paths on DECON and GSCALER modules of Exynos5433. 3. Add Slim SecuritySubSystem to Exynos5433. * tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add SlimSSS to Exynos5433 arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433 arm64: dts: exynos: configure GSCALER related clocks on TM2 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2 1. Use proper ADC on Exynos4412. 2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps, unused regulators, ADC and UHS-I SD card support. Beside that adjust regulators to proper level and add always-on when needed. 3. Extend the Exynos5260: high speed I2C and proper external interrupts. Also fix shared external interrupt line and use better PLL for MMC clocks. 4. Fix audio recording (broken around v5.1) and microphone recording (since v4.14) on Exynos5422 Odroid XU3 boards. 5. Minor cleanups (stdout-path and bootargs). * tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Remove console argument from bootargs ARM: dts: exynos: Use stdout-path property instead of console in bootargs ARM: dts: exynos: Fix spelling mistake of EXYNOS5420 ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3 ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa ARM: dts: exynos: Extend the eMMC node on Arndale Octa ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa ARM: dts: exynos: Fix audio routing on Odroid XU3 ARM: dts: exynos: Enable ADC on Arndale Octa ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260 ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260 ARM: dts: exynos: Add high speed I2C ports for Exynos5260 ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260 ARM: dts: exynos: Order nodes alphabetically in Arndale Octa ARM: dts: exynos: Add CPU cooling on Arndale Octa ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board ARM: dts: exynos: Use stdout path property on Arndale Octa board ARM: dts: exynos: Document regulator used by ADC on Odroid U3 ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'stm32-dt-for-v5.2-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.2, round 1 Highlights: ---------- MPU part: - Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add sysconfig clock support on stm32mp157c. - Add romem and temperature calibration support on stm32mp157c. - Add SPDIFRX support on stm32mp157c. - Enable CEC on stm32mp157a-dk1/dk2. MCU part: - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. - Add romem and temperature calibration support on stm32f429 (and so stm32f469). - Enable stm32f769 clock driver * tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: enable cec on stm32mp157a-dk1 board ARM: dts: stm32: add cec pins muxing on stm32mp157 ARM: dts: stm32: add ltdc pins muxing on stm32mp157 ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157 ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 ARM: dts: stm32: Enable STM32F769 clock driver ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board ARM: dts: stm32: add spdfirx pins to stm32mp157c ARM: dts: stm32: add spdifrx support on stm32mp157c ARM: dts: stm32: Add romem and temperature calibration on stm32f429 ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c ARM: dts: stm32: Add clock on stm32mp157c syscfg ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1 ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1 ARM: dts: stm32: add IPCC mailbox support on STM32MP157c ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'aspeed-5.2-devicetree' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.2 - RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs * tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: witherspoon: Update BMC partitioning ARM: dts: aspeed: cmm: enable iio-hwmon-adc ARM: dts: aspeed: tiogapass: Enable VUART ARM: dts: aspeed-g5: Add video engine ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: witherspoon: Enable vhub ARM: dts: aspeed: palmetto: Fix flash_memory region ARM: dts: aspeed: ast2500: Update flash layout Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm64-dt-for-v5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car Gen3 SoC based Salvator-X and Salvator-XS boards - Add GPIO keys support - Sort rwdt node alphabetically * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Use extended audio DMAC register * R-Car M3-W (r8a7796) SoC - Remove unneeded sound #address/size-cells * R-Car M3-N (r8a77965) SoC - Add SSIU support for audio * R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs - Remove invalid compatible value for CSI40 * R-Car E3 (r8a77990) SoC - Cprrect SPDX license identifier style * R-Car E3 (r8a77990) based Ebisu board - Add BD9571 PMIC with DDR0 backup power config - Correct adv7482 hexadecimal register address - Add GPIO expander * R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards - Update bootargs to bring them into line with other R-Car Gen3 boards - Enable LVDS1 encoder * R-Car D3 (r8a77995) based Draak board - Correct EthernetAVB phy mode - Enable CAN0 and CAN1 * RZ/G2E (r8a774c0) SoC - Add CANFD support - Correct CPU node style * RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs - Add clkp2 clock to CAN nodes * RZ/G2E (r8a774c0) based EK874 board - Add LED, CAN and RTC support * tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits) arm64: dts: renesas: salvator-common: Add GPIO keys support arm64: dts: renesas: use extended audio dmac register arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii arm64: dts: renesas: salvator-common: Sort node label arm64: dts: renesas: Update Ebisu and Draak bootargs arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes arm64: dts: renesas: r8a774c0: Add CANFD support arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1 arm64: dts: renesas: r8a774c0-cat874: Add RWDT support arm64: dts: renesas: ebisu: Enable VIN5 arm64: dts: renesas: r8a774c0-cat874: Add LEDs support arm64: dts: renesas: r8a774c0-cat874: add RTC support arm64: dts: renesas: cat875: Add CAN support arm64: dts: renesas: r8a774c0: Fix cpu nodes style arm64: dts: renesas: r8a77965: add SSIU support for sound ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts64-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Core new soc features are hdmi-cec for rk3328, scheduler capacity-values and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also directly got some additional features added after the boards itself. The Rock960 family (rock960+ficus) got their power-tree cleaned to match the schematics and also got hdmi-audio and their gpu enabled. Mali support also got enabled on the RockPi4 and finally both rk3328-rock64 and rk3328-roc-cc got some additional features. * tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits) arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy. arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller. arm64: dts: rockchip: Add nanopi4 ethernet phy arm64: dts: rockchip: Add PWM fan for NanoPC-T4 arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911) arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960 arm64: dts: rockchip: Add Nanopi NEO4 initial support arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64 arm64: dts: rockchip: Add support for the Orange Pi RK3399 board. arm64: dts: rockchip: enable mali on rock960 boards arm64: dts: rockchip: enable mali on Rock Pi 4 arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes arm64: dts: rockchip: give some life to the rk3328-roc-cc leds arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 arm64: dts: rockchip: add ir-receiver node on rk3328-rock64 arm64: dts: rockchip: add leds node on rk3328-rock64 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts32-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Quite a bit of love for the rk3288-veyron chromeos devices and a number of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. * tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808 ARM: dts: rockchip: add rk3066 hdmi nodes ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty ARM: dts: rockchip: Add vdd_logic to rk3288-veyron ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288 ARM: dts: rockchip: Enable WiFi on rk3288-tinker ARM: dts: rockchip: add grf reference in rk3288 tsadc node ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2 - add GPIO line names for odroid-c1 boards - support internal clock measure driver * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add the GPIO line names ARM: dts: meson8b: add the internal clock measurer ARM: dts: meson8: add the internal clock measurer Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.2 Highlights - new board: SEI Robotics 510, based on S905X2 SoC (G12A) - enable more periphearls for S905X2 based boards * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12a: Add CMA reserved memory arm64: dts: meson-g12a-x96-max: Enable BT Module arm64: dts: meson-g12a-x96-max: add regulators arm64: dts: meson-g12a-sei510: add regulators arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl arm64: dts: meson-g12a-sei510: add uart_AO pinctrl arm64: dts: meson-g12a-u200: add uart_AO pinctrl arm64: dts: meson: g12a: Add UART A, B & C nodes and pins arm64: dts: meson: g12a: add reset controller arm64: dts: meson: g12a: add uart_ao_a pinctrl arm64: dts: meson: g12a: add pinctrl support controllers arm64: dts: meson: g12a: Add AO Clock + Reset Controller support arm64: dts: meson-gxm-nexbox-a1: Enable USB arm64: dts: meson: g12a: add efuse arm64: dts: meson: g12a: add secure monitor arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED arm64: dts: meson-g12a: Add AO Secure node arm64: dts: Add SEI Robotics SEI510 Board vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-23arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodesBjorn Andersson
Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone based remoteproc, supporting booting these cores on e.g. the MTP, and enable the same for the MTP. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-23arm64: dts: qcom: sdm845: Define rmtfs memoryBjorn Andersson
Define the rmtfs memory node. As the memory region specified in version 10 of the memory map is only 1MB a chunk of unallocated memory is chosen. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-23arm64: dts: qcom: sdm845: Update reserved memory mapBjorn Andersson
Update existing and add missing regions to the reserved memory map, as described in version 10. Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-23arm64: dts: sdm845: Add UFS PHY resetEvan Green
Wire up the reset controller in the Qcom UFS controller for the PHY. This will be used to toggle PHY reset during initialization of the PHY. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-23dt-bindings: iio: imx7d-adc: Add #io-channel-cells to requiredAndrey Smirnov
Add #io-channel-cells to list of required properties. Needed to be able to reference that node by phandle. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-23ARM: dts: imx7s: Specify #io-channel-cells in ADC nodesAndrey Smirnov
Specify #io-channel-cells in ADC nodes. Needed to be able to reference them by phandle. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0Andrey Smirnov
Specify CS as GPIO_ACTIVE_LOW in spi0 to fix the following warning: m25p128@0 enforce active low on chipselect handle Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAINAndrey Smirnov
Mark i2c0 SCL as GPIO_OPEN_DRAIN to fix the following warning: gpio-36 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: Add support for ZII i.MX7 RPU2 boardAndrey Smirnov
Add support for ZII's i.MX7 based Remote Peripheral Unit 2 (RPU2) board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22dt-bindings: arm: fsl: Add support for ZII i.MX7 RPU2 boardAndrey Smirnov
Add support for ZII i.MX7 RPU2 board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: bugfix tqma7 soft reset issueBruno Thomsen
Running reboot command on the TQMa7 board would just hang infinite at the end of the system shutdown process. Handling of i.MX7 errata e10574: Watchdog: A watchdog timeout or software trigger will not reset the SOC. Moved pinctrl from common mba7 to common tqma7 dtsi as it improves readability of errata handling. Most integrators of this SoM will likely use the development board as inspiration for handling this SoC issue. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21arm64: dts: clearfog-gt-8k: add wlan_disable signal hogThomas Schreiber
There is currently no DT binding for GPIO rfkill signals. To make mini-PCIe attached WiFi devices work, use gpio-hog to hold the wlan_disable signal de-asserted. Signed-off-by: Thomas Schreiber <tschreibe@gmail.com> [baruch: add pinctrl node; rename tag] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-04-21ARM: dts: armada-38x: add interrupts for watchdogChris Packham
The first interrupt is for the regular watchdog timeout. Normally the RSTOUT line will trigger a reset before this interrupt fires but on systems with a non-standard reset it may still trigger. The second interrupt is for a timer1 which is used as a pre-timeout for the watchdog. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-04-21ARM: dts: imx53: Add Menlosystems M53 boardMarek Vasut
Add device tree for the Menlosystems board based on i.MX53 M53 SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21ARM: dts: imx53: Rename M53 SoM touchscreen nodeMarek Vasut
Rename the touchscreen node to match contemporary design. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>