Age | Commit message (Collapse) | Author |
|
Check whether the MAC driver has implemented the get_ts_info()
method first, and call it if present. If this method returns
-EOPNOTSUPP, defer to the phylib or default implementation.
XXX: review any drivers that use phylib and provide get_ts_info().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Use in-band-status for the SGMII PHY on Macchiatobin platforms.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The I2C1 bus on early mcbin hardware is mis-wired, swapping SCL and SDA.
Work around this by using the i2c-gpio driver instead. XXX Caught early
and this commit should be removed for mainline. XXX
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add the pinctrl settings and interrupts for the 10G PHYs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add several pinctrls for functions brought out to connectors but not yet
usable with the core DT description.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Comment about the use of currently unconfigured MPP pins.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add pwm-fan support for controlling the fan speed, which allows the fan
speed to be controlled via sysfs. Alternatively, users can also add
their cooling maps to DT which will be specific to the environment that
they house the Macchiatobin, as well as their fan setup. For example,
one may connect PWM controlled case fans to this connector, and use
the PWM signal to control the case fans.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Honour deferred probing for devm_clk_get() so that we can get the clock
for PWM.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The resume operation of mvebu xHCI host have some issues,
so The XHCI_RESET_ON_RESUME quirk is added for it.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Lior Amsalem <alior@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Split out the code handling the GMAC from the rest of the driver. This
block appears to be shared amongst several revisions of the IP.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Further augmentation of the comphy setup.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Report the PCS inband properties to phylink for Marvell PP2 interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Report the PCS inband properties to phylink for Marvell NETA
interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a pcs_query_inband() interface which reflects phy_query_inband()
for PHYs. This can be used to determine for the specified interface
mode whether in-band signalling is supported by the PCS, and whether
the PCS requires in-band signalling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Use phylink_pcs_change() when reporting changes in PCS link state to
phylink.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Use phy_query_inband() with the initial mode when configuring copper
SFP modules to determine whether we should use inband or PHY mode. This
allows us to remove the BCM84881 specific detection from phylink, and
instead rely on the PHY driver giving us this detail.
We can use a simple check here - if the PHY reports that the inband
information is valid, but sets no other bits, then inband is definitely
not supported.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Since the BCM84881 driver always provides phy->supported_interfaces,
and the driver is required for this PHY, move phylink_phy_no_inband()
to the case where this is non-empty.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Move the SFP autoneg mode into struct phylink rather than passing it
into phylink_sfp_config(). This is generally MLO_AN_INBAND except when
we have a copper SFP with a Broadcom 84881 PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The modalias string provided in the uevent sysfs file does not conform
to the format used in PHY driver modules. One of the reasons is that
udev loading of PHY driver modules has not been an expected use case.
This patch changes the MODALIAS entry for only PHY devices from:
MODALIAS=of:Nethernet-phyT(null)
to:
MODALIAS=mdio:00000000001000100001010100010011
Other MDIO devices (such as DSA) remain as before.
However, having udev automatically load the module has the advantage
of making use of existing functionality to have the module loaded
before the device is bound to the driver, thus taking advantage of
multithreaded boot systems, potentially decreasing the boot time.
However, this patch will not solve any issues with the driver module
not being loaded prior to the network device needing to use the PHY.
This is something that is completely out of control of any patch to
change the uevent mechanism.
Reported-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Use the phylink_mode_*() helpers in all drivers so we can change the
definition of the "mode" argument.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add helpers to decode the mode argument passed to the various MAC and
PCS functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Use the phy interface mode bitmaps for SFP modules and PHYs to select
the operating interface for SFPs and PHYs with SFPs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add a supported_interfaces member to phylib so we know which
interfaces a PHY supports. Currently, set any unconverted driver
to indicate all interfaces are supported.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Display SFP module information verbosely, splitting the generic parts
into a separate file.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Add a compatible for SFP+ cages. SFP+ cages are backwards compatible,
but the ethernet device behind them may not support the slower speeds
of SFP modules.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Cooled SFP+ transceivers need a longer initialisation (startup) time.
Select the initialisation time depending on the cooled option bit.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
phy_error() is called from phy_interrupt() or phy_state_machine(), and
uses WARN_ON() to print a backtrace. The backtrace is not useful when
reporting a PHY error.
However, a system may contain multiple ethernet PHYs, and phy_error()
gives no clue which one caused the problem.
Replace WARN_ON() with a call to phydev_err() so that we can see which
PHY had an error, and also inform the user that we are halting the PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Allow the PHY to probe when there is no firmware, but do not allow the
link to come up by forcing the PHY state to PHY_HALTED in a similar way
to phy_error().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Provide phy driver start/stop hooks so that the PHY driver knows when
the network driver is starting or stopping. This will be used for the
Marvell 10G driver so that we can sanely refuse to start if the PHYs
firmware is not present, and also so that we can sanely support SFPs
behind the PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Support reporting the hardware resolved pause enablement states via
phylib, overriding our software implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Allow phylib drivers to pass the hardware-resolved pause state to MAC
drivers, rather than using the software-based pause resolution code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
If MDIO_USXGMII_LINK is not set, it means that the PHYs media side
link is down. Indicate back to phylink that the link as a whole is
down.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Configure the Macchiatobin 10G PHY LED modes to correct their polarity.
We keep the existing LED behaviours, but switch their polarity to
reflect how they are connected. Tweak the LED modes as well to be:
left: off = no link
solid green = RJ45 link up (not SFP+ cage)
flash green = traffic
right: off = no link
solid green = 10G
solid yellow = 1G
flash green = 100M
flash yellow = 10M
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add support for configuring the LEDs. Macchiatobin has an oddity in
that the left LED goes out when the cable is connected, and flashes
when there's link activity. This is because the reset default for
the LED outputs assume that the LED is connected to supply, not to
ground. Add support for configuring the LED modes and polarities.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add a DT bindings document for the Marvell 10G driver, which will
augment the generic ethernet PHY binding by having LED mode
configuration.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Allow EEE management for SFPs without accessible PHYs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|