summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-11net: lmc: fix spelling mistake "runnin" -> "running"Colin Ian King
There is a spelling mistake in the lmc_trace message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11NFC: st95hf: fix spelling mistake "receieve" -> "receive"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net/rds: An rds_sock is added too early to the hash tableKa-Cheong Poon
In rds_bind(), an rds_sock is added to the RDS bind hash table before rs_transport is set. This means that the socket can be found by the receive code path when rs_transport is NULL. And the receive code path de-references rs_transport for congestion update check. This can cause a panic. An rds_sock should not be added to the bind hash table before all the needed fields are set. Reported-by: syzbot+4b4f8163c2e246df3c4c@syzkaller.appspotmail.com Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11mac80211: Do not send Layer 2 Update frame before authorizationJouni Malinen
The Layer 2 Update frame is used to update bridges when a station roams to another AP even if that STA does not transmit any frames after the reassociation. This behavior was described in IEEE Std 802.11F-2003 as something that would happen based on MLME-ASSOCIATE.indication, i.e., before completing 4-way handshake. However, this IEEE trial-use recommended practice document was published before RSN (IEEE Std 802.11i-2004) and as such, did not consider RSN use cases. Furthermore, IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been maintained amd should not be used anymore. Sending out the Layer 2 Update frame immediately after association is fine for open networks (and also when using SAE, FT protocol, or FILS authentication when the station is actually authenticated by the time association completes). However, it is not appropriate for cases where RSN is used with PSK or EAP authentication since the station is actually fully authenticated only once the 4-way handshake completes after authentication and attackers might be able to use the unauthenticated triggering of Layer 2 Update frame transmission to disrupt bridge behavior. Fix this by postponing transmission of the Layer 2 Update frame from station entry addition to the point when the station entry is marked authorized. Similarly, send out the VLAN binding update only if the STA entry has already been authorized. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11lib/Kconfig: fix OBJAGG in lib/ menu structureRandy Dunlap
Keep the "Library routines" menu intact by moving OBJAGG into it. Otherwise OBJAGG is displayed/presented as an orphan in the various config menus. Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: David S. Miller <davem@davemloft.net> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: sonic: replace dev_kfree_skb in sonic_send_packetMao Wenan
sonic_send_packet will be processed in irq or non-irq context, so it would better use dev_kfree_skb_any instead of dev_kfree_skb. Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11wimax: i2400: fix memory leakNavid Emamdoost
In i2400m_op_rfkill_sw_toggle cmd buffer should be released along with skb response. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10sctp: fix the missing put_user when dumping transport thresholdsXin Long
This issue causes SCTP_PEER_ADDR_THLDS sockopt not to be able to dump a transport thresholds info. Fix it by adding 'goto' put_user in sctp_getsockopt_paddr_thresholds. Fixes: 8add543e369d ("sctp: add SCTP_FUTURE_ASSOC for SCTP_PEER_ADDR_THLDS sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10sch_hhf: ensure quantum and hhf_non_hh_weight are non-zeroCong Wang
In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero, it would make no progress inside the loop in hhf_dequeue() thus kernel would get stuck. Fix this by checking this corner case in hhf_change(). Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Terry Lam <vtlam@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10net_sched: check cops->tcf_block in tc_bind_tclass()Cong Wang
At least sch_red and sch_tbf don't implement ->tcf_block() while still have a non-zero tc "class". Instead of adding nop implementations to each of such qdisc's, we can just relax the check of cops->tcf_block() in tc_bind_tclass(). They don't support TC filter anyway. Reported-by: syzbot+21b29db13c065852f64b@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10bridge/mdb: remove wrong use of NLM_F_MULTINicolas Dichtel
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end. In fact, NLMSG_DONE is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 949f1e39a617 ("bridge: mdb: notify on router port add and del") CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10net/ibmvnic: Fix missing { in __ibmvnic_resetMichal Suchanek
Commit 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue") adds a } without corresponding { causing build break. Fixes: 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07nfp: flower: cmsg rtnl locks can timeout reify messagesFred Lotter
Flower control message replies are handled in different locations. The truly high priority replies are handled in the BH (tasklet) context, while the remaining replies are handled in a predefined Linux work queue. The work queue handler orders replies into high and low priority groups, and always start servicing the high priority replies within the received batch first. Reply Type: Rtnl Lock: Handler: CMSG_TYPE_PORT_MOD no BH tasklet (mtu) CMSG_TYPE_TUN_NEIGH no BH tasklet CMSG_TYPE_FLOW_STATS no BH tasklet CMSG_TYPE_PORT_REIFY no WQ high CMSG_TYPE_PORT_MOD yes WQ high (link/mtu) CMSG_TYPE_MERGE_HINT yes WQ low CMSG_TYPE_NO_NEIGH no WQ low CMSG_TYPE_ACTIVE_TUNS no WQ low CMSG_TYPE_QOS_STATS no WQ low CMSG_TYPE_LAG_CONFIG no WQ low A subset of control messages can block waiting for an rtnl lock (from both work queue priority groups). The rtnl lock is heavily contended for by external processes such as systemd-udevd, systemd-network and libvirtd, especially during netdev creation, such as when flower VFs and representors are instantiated. Kernel netlink instrumentation shows that external processes (such as systemd-udevd) often use successive rtnl_trylock() sequences, which can result in an rtnl_lock() blocked control message to starve for longer periods of time during rtnl lock contention, i.e. netdev creation. In the current design a single blocked control message will block the entire work queue (both priorities), and introduce a latency which is nondeterministic and dependent on system wide rtnl lock usage. In some extreme cases, one blocked control message at exactly the wrong time, just before the maximum number of VFs are instantiated, can block the work queue for long enough to prevent VF representor REIFY replies from getting handled in time for the 40ms timeout. The firmware will deliver the total maximum number of REIFY message replies in around 300us. Only REIFY and MTU update messages require replies within a timeout period (of 40ms). The MTU-only updates are already done directly in the BH (tasklet) handler. Move the REIFY handler down into the BH (tasklet) in order to resolve timeouts caused by a blocked work queue waiting on rtnl locks. Signed-off-by: Fred Lotter <frederik.lotter@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net: gso: Fix skb_segment splat when splitting gso_size mangled skb having ↵Shmulik Ladkani
linear-headed frag_list Historically, support for frag_list packets entering skb_segment() was limited to frag_list members terminating on exact same gso_size boundaries. This is verified with a BUG_ON since commit 89319d3801d1 ("net: Add frag_list support to skb_segment"), quote: As such we require all frag_list members terminate on exact MSS boundaries. This is checked using BUG_ON. As there should only be one producer in the kernel of such packets, namely GRO, this requirement should not be difficult to maintain. However, since commit 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper"), the "exact MSS boundaries" assumption no longer holds: An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but leaves the frag_list members as originally merged by GRO with the original 'gso_size'. Example of such programs are bpf-based NAT46 or NAT64. This lead to a kernel BUG_ON for flows involving: - GRO generating a frag_list skb - bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room() - skb_segment() of the skb See example BUG_ON reports in [0]. In commit 13acc94eff12 ("net: permit skb_segment on head_frag frag_list skb"), skb_segment() was modified to support the "gso_size mangling" case of a frag_list GRO'ed skb, but *only* for frag_list members having head_frag==true (having a page-fragment head). Alas, GRO packets having frag_list members with a linear kmalloced head (head_frag==false) still hit the BUG_ON. This commit adds support to skb_segment() for a 'head_skb' packet having a frag_list whose members are *non* head_frag, with gso_size mangled, by disabling SG and thus falling-back to copying the data from the given 'head_skb' into the generated segmented skbs - as suggested by Willem de Bruijn [1]. Since this approach involves the penalty of skb_copy_and_csum_bits() when building the segments, care was taken in order to enable this solution only when required: - untrusted gso_size, by testing SKB_GSO_DODGY is set (SKB_GSO_DODGY is set by any gso_size mangling functions in net/core/filter.c) - the frag_list is non empty, its item is a non head_frag, *and* the headlen of the given 'head_skb' does not match the gso_size. [0] https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/ https://lore.kernel.org/netdev/9265b93f-253d-6b8c-f2b8-4b54eff1835c@fb.com/ [1] https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/ Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07ipv6: addrconf_f6i_alloc - fix non-null pointer check to !IS_ERR()Maciej Żenczykowski
Fixes a stupid bug I recently introduced... ip6_route_info_create() returns an ERR_PTR(err) and not a NULL on error. Fixes: d55a2e374a94 ("net-ipv6: fix excessive RTF_ADDRCONF flag on ::1/128 local route (and others)'") Cc: David Ahern <dsahern@gmail.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07isdn/capi: check message length in capi_write()Eric Biggers
syzbot reported: BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 do_loop_readv_writev fs/read_write.c:703 [inline] do_iter_write+0x83e/0xd80 fs/read_write.c:961 vfs_writev fs/read_write.c:1004 [inline] do_writev+0x397/0x840 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109 __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 [...] The problem is that capi_write() is reading past the end of the message. Fix it by checking the message's length in the needed places. Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/ibmvnic: free reset work of removed device from queueJuliet Kim
Commit 36f1031c51a2 ("ibmvnic: Do not process reset during or after device removal") made the change to exit reset if the driver has been removed, but does not free reset work items of the adapter from queue. Ensure all reset work items are freed when breaking out of the loop early. Fixes: 36f1031c51a2 ("ibmnvic: Do not process reset during or after device removal”) Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net: phylink: Fix flow control resolutionStefan Chulski
Regarding to IEEE 802.3-2015 standard section 2 28B.3 Priority resolution - Table 28-3 - Pause resolution In case of Local device Pause=1 AsymDir=0, Link partner Pause=1 AsymDir=1, Local device resolution should be enable PAUSE transmit, disable PAUSE receive. And in case of Local device Pause=1 AsymDir=1, Link partner Pause=1 AsymDir=0, Local device resolution should be enable PAUSE receive, disable PAUSE transmit. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reported-by: Shaul Ben-Mayor <shaulb@marvell.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/hamradio/6pack: Fix the size of a sk_buff used in 'sp_bump()'Christophe JAILLET
We 'allocate' 'count' bytes here. In fact, 'dev_alloc_skb' already add some extra space for padding, so a bit more is allocated. However, we use 1 byte for the KISS command, then copy 'count' bytes, so count+1 bytes. Explicitly allocate and use 1 more byte to be safe. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2019-09-06 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) verifier precision tracking fix, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06Merge tag 'wireless-drivers-for-davem-2019-09-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Fourth set of fixes for 5.3, and hopefully really the last one. Quite a few CVE fixes this time but at least to my knowledge none of them have a known exploit. mt76 * workaround firmware hang by disabling hardware encryption on MT7630E * disable 5GHz band for MT7630E as it's not working properly mwifiex * fix IE parsing to avoid a heap buffer overflow iwlwifi * fix for QuZ device initialisation rt2x00 * another fix for rekeying * revert a commit causing degradation in rx signal levels rsi * fix a double free ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06MAINTAINERS: add myself as maintainer for xilinx axiethernet driverRadhey Shyam Pandey
I am maintaining xilinx axiethernet driver in xilinx tree and would like to maintain it in the mainline kernel as well. Hence adding myself as a maintainer. Also Anirudha and John has moved to new roles, so based on request removing them from the maintainer list. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: sched: fix reordering issuesEric Dumazet
Whenever MQ is not used on a multiqueue device, we experience serious reordering problems. Bisection found the cited commit. The issue can be described this way : - A single qdisc hierarchy is shared by all transmit queues. (eg : tc qdisc replace dev eth0 root fq_codel) - When/if try_bulk_dequeue_skb_slow() dequeues a packet targetting a different transmit queue than the one used to build a packet train, we stop building the current list and save the 'bad' skb (P1) in a special queue. (bad_txq) - When dequeue_skb() calls qdisc_dequeue_skb_bad_txq() and finds this skb (P1), it checks if the associated transmit queues is still in frozen state. If the queue is still blocked (by BQL or NIC tx ring full), we leave the skb in bad_txq and return NULL. - dequeue_skb() calls q->dequeue() to get another packet (P2) The other packet can target the problematic queue (that we found in frozen state for the bad_txq packet), but another cpu just ran TX completion and made room in the txq that is now ready to accept new packets. - Packet P2 is sent while P1 is still held in bad_txq, P1 might be sent at next round. In practice P2 is the lead of a big packet train (P2,P3,P4 ...) filling the BQL budget and delaying P1 by many packets :/ To solve this problem, we have to block the dequeue process as long as the first packet in bad_txq can not be sent. Reordering issues disappear and no side effects have been seen. Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-09-05 1) Several xfrm interface fixes from Nicolas Dichtel: - Avoid an interface ID corruption on changelink. - Fix wrong intterface names in the logs. - Fix a list corruption when changing network namespaces. - Fix unregistation of the underying phydev. 2) Fix a potential warning when merging xfrm_plocy nodes. From Florian Westphal. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06forcedeth: use per cpu to collect xmit/recv statisticsZhu Yanjun
When testing with a background iperf pushing 1Gbit/sec traffic and running both ifconfig and netstat to collect statistics, some deadlocks occurred. Ifconfig and netstat will call nv_get_stats64 to get software xmit/recv statistics. In the commit f5d827aece36 ("forcedeth: implement ndo_get_stats64() API"), the normal tx/rx variables is to collect tx/rx statistics. The fix is to replace normal tx/rx variables with per cpu 64-bit variable to collect xmit/recv statistics. The per cpu variable will avoid deadlocks and provide fast efficient statistics updates. In nv_probe, the per cpu variable is initialized. In nv_remove, this per cpu variable is freed. In xmit/recv process, this per cpu variable will be updated. In nv_get_stats64, this per cpu variable on each cpu is added up. Then the driver can get xmit/recv packets statistics. A test runs for several days with this commit, the deadlocks disappear and the performance is better. Tested: - iperf SMP x86_64 -> Client connecting to 1.1.1.108, TCP port 5001 TCP window size: 85.0 KByte (default) ------------------------------------------------------------ [ 3] local 1.1.1.105 port 38888 connected with 1.1.1.108 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.10 GBytes 943 Mbits/sec ifconfig results: enp0s9 Link encap:Ethernet HWaddr 00:21:28:6f:de:0f inet addr:1.1.1.105 Bcast:0.0.0.0 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5774764531 errors:0 dropped:0 overruns:0 frame:0 TX packets:633534193 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7646159340904 (7.6 TB) TX bytes:11425340407722 (11.4 TB) netstat results: Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg ... enp0s9 1500 0 5774764531 0 0 0 633534193 0 0 0 BMRU ... Fixes: f5d827aece36 ("forcedeth: implement ndo_get_stats64() API") CC: Joe Jin <joe.jin@oracle.com> CC: JUNXIAO_BI <junxiao.bi@oracle.com> Reported-and-tested-by: Nan san <nan.1986san@gmail.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: sonic: return NETDEV_TX_OK if failed to map bufferMao Wenan
NETDEV_TX_BUSY really should only be used by drivers that call netif_tx_stop_queue() at the wrong moment. If dma_map_single() is failed to map tx DMA buffer, it might trigger an infinite loop. This patch use NETDEV_TX_OK instead of NETDEV_TX_BUSY, and change printk to pr_err_ratelimited. Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05bpf: fix precision tracking of stack slotsAlexei Starovoitov
The problem can be seen in the following two tests: 0: (bf) r3 = r10 1: (55) if r3 != 0x7b goto pc+0 2: (7a) *(u64 *)(r3 -8) = 0 3: (79) r4 = *(u64 *)(r10 -8) .. 0: (85) call bpf_get_prandom_u32#7 1: (bf) r3 = r10 2: (55) if r3 != 0x7b goto pc+0 3: (7b) *(u64 *)(r3 -8) = r0 4: (79) r4 = *(u64 *)(r10 -8) When backtracking need to mark R4 it will mark slot fp-8. But ST or STX into fp-8 could belong to the same block of instructions. When backtracing is done the parent state may have fp-8 slot as "unallocated stack". Which will cause verifier to warn and incorrectly reject such programs. Writes into stack via non-R10 register are rare. llvm always generates canonical stack spill/fill. For such pathological case fall back to conservative precision tracking instead of rejecting. Reported-by: syzbot+c8d66267fd2b5955287e@syzkaller.appspotmail.com Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05net: Properly update v4 routes with v6 nexthopDonald Sharp
When creating a v4 route that uses a v6 nexthop from a nexthop group. Allow the kernel to properly send the nexthop as v6 via the RTA_VIA attribute. Broken behavior: $ ip nexthop add via fe80::9 dev eth0 $ ip nexthop show id 1 via fe80::9 dev eth0 scope link $ ip route add 4.5.6.7/32 nhid 1 $ ip route show default via 10.0.2.2 dev eth0 4.5.6.7 nhid 1 via 254.128.0.0 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 $ Fixed behavior: $ ip nexthop add via fe80::9 dev eth0 $ ip nexthop show id 1 via fe80::9 dev eth0 scope link $ ip route add 4.5.6.7/32 nhid 1 $ ip route show default via 10.0.2.2 dev eth0 4.5.6.7 nhid 1 via inet6 fe80::9 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 $ v2, v3: Addresses code review comments from David Ahern Fixes: dcb1ecb50edf (“ipv4: Prepare for fib6_nh from a nexthop object”) Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05Merge branch 'nexthops-Fix-multipath-notifications-for-IPv6-and-selftests'David S. Miller
David Ahern says: ==================== nexthops: Fix multipath notifications for IPv6 and selftests A couple of bug fixes noticed while testing Donald's patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05selftest: A few cleanups for fib_nexthops.shDavid Ahern
Cleanups of the tests in fib_nexthops.sh 1. Several tests noted unexpected route output, but the discrepancy was not showing in the summary output and overlooked in the verbose output. Add a WARNING message to the summary output to make it clear a test is not showing expected output. 2. Several check_* calls are missing extra data like scope and metric causing mismatches when the nexthops or routes are correct - some of them are a side effect of the evolving iproute2 command. Update the data to the expected output. 3. Several check_routes are checking for the wrong nexthop data, most likely a copy-paste-update error. 4. A couple of tests were re-using a nexthop id that already existed. Fix those to use a new id. Fixes: 6345266a9989 ("selftests: Add test cases for nexthop objects") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ipv6: Fix RTA_MULTIPATH with nexthop objectsDavid Ahern
A change to the core nla helpers was missed during the push of the nexthop changes. rt6_fill_node_nexthop should be calling nla_nest_start_noflag not nla_nest_start. Currently, iproute2 does not print multipath data because of parsing issues with the attribute. Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: sock_map, fix missing ulp check in sock hash caseJohn Fastabend
sock_map and ULP only work together when ULP is loaded after the sock map is loaded. In the sock_map case we added a check for this to fail the load if ULP is already set. However, we missed the check on the sock_hash side. Add a ULP check to the sock_hash update path. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: syzbot+7a6ee4d0078eac6bf782@syzkaller.appspotmail.com Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: fixed_phy: Add forward declaration for struct gpio_desc;Moritz Fischer
Add forward declaration for struct gpio_desc in order to address the following: ./include/linux/phy_fixed.h:48:17: error: 'struct gpio_desc' declared inside parameter list [-Werror] ./include/linux/phy_fixed.h:48:17: error: its scope is only this definition or declaration, which is probably not what you want [-Werror] Fixes: 71bd106d2567 ("net: fixed-phy: Add fixed_phy_register_with_gpiod() API") Signed-off-by: Moritz Fischer <mdf@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05tipc: add NULL pointer check before calling kfree_rcuXin Long
Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When tipc_nametbl_remove_publ returns NULL, the panic below happens: BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 RIP: 0010:__call_rcu+0x1d/0x290 Call Trace: <IRQ> tipc_publ_notify+0xa9/0x170 [tipc] tipc_node_write_unlock+0x8d/0x100 [tipc] tipc_node_link_down+0xae/0x1d0 [tipc] tipc_node_check_dest+0x3ea/0x8f0 [tipc] ? tipc_disc_rcv+0x2c7/0x430 [tipc] tipc_disc_rcv+0x2c7/0x430 [tipc] ? tipc_rcv+0x6bb/0xf20 [tipc] tipc_rcv+0x6bb/0xf20 [tipc] ? ip_route_input_slow+0x9cf/0xb10 tipc_udp_recv+0x195/0x1e0 [tipc] ? tipc_udp_is_known_peer+0x80/0x80 [tipc] udp_queue_rcv_skb+0x180/0x460 udp_unicast_rcv_skb.isra.56+0x75/0x90 __udp4_lib_rcv+0x4ce/0xb90 ip_local_deliver_finish+0x11c/0x210 ip_local_deliver+0x6b/0xe0 ? ip_rcv_finish+0xa9/0x410 ip_rcv+0x273/0x362 Fixes: 97ede29e80ee ("tipc: convert name table read-write lock to RCU") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2019-09-05 Here are a few more Bluetooth fixes for 5.3. I hope they can still make it. There's one USB ID addition for btusb, two reverts due to discovered regressions, and two other important fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05Revert "Bluetooth: validate BLE connection interval updates"Marcel Holtmann
This reverts commit c49a8682fc5d298d44e8d911f4fa14690ea9485e. There are devices which require low connection intervals for usable operation including keyboards and mice. Forcing a static connection interval for these types of devices has an impact in latency and causes a regression. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-09-05net-ipv6: fix excessive RTF_ADDRCONF flag on ::1/128 local route (and others)Maciej Żenczykowski
There is a subtle change in behaviour introduced by: commit c7a1ce397adacaf5d4bb2eab0a738b5f80dc3e43 'ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create' Before that patch /proc/net/ipv6_route includes: 00000000000000000000000000000001 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000003 00000000 80200001 lo Afterwards /proc/net/ipv6_route includes: 00000000000000000000000000000001 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80240001 lo ie. the above commit causes the ::1/128 local (automatic) route to be flagged with RTF_ADDRCONF (0x040000). AFAICT, this is incorrect since these routes are *not* coming from RA's. As such, this patch restores the old behaviour. Fixes: c7a1ce397ada ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create") Cc: David Ahern <dsahern@gmail.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05sctp: use transport pf_retrans in sctp_do_8_2_transport_strikeXin Long
Transport should use its own pf_retrans to do the error_count check, instead of asoc's. Otherwise, it's meaningless to make pf_retrans per transport. Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05rxrpc: Fix misplaced tracelineDavid Howells
There's a misplaced traceline in rxrpc_input_packet() which is looking at a packet that just got released rather than the replacement packet. Fix this by moving the traceline after the assignment that moves the new packet pointer to the actual packet pointer. Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Reported-by: Hillf Danton <hdanton@sina.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) br_netfilter drops IPv6 packets if ipv6 is disabled, from Leonardo Bras. 2) nft_socket hits BUG() due to illegal skb->sk caching, patch from Fernando Fernandez Mancera. 3) nft_fib_netdev could be called with ipv6 disabled, leading to crash in the fib lookup, also from Leonardo. 4) ctnetlink honors IPS_OFFLOAD flag, just like nf_conntrack sysctl does. 5) Properly set up flowtable entry timeout, otherwise immediate removal by garbage collector might occur. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-04Bluetooth: bpa10x: change return valueNavid Emamdoost
When returning from bpa10x_send_frame, it is necessary to propagate any potential errno returned from usb_submit_urb. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-04Bluetooth: hci_qca: disable irqs when spinlock is acquiredHarish Bandi
Looks like Deadlock is observed in hci_qca while performing stress and stability tests. Since same lock is getting acquired from qca_wq_awake_rx and hci_ibs_tx_idle_timeout seeing spinlock recursion, irqs should be disable while acquiring the spinlock always. Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-04Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devicesJian-Hong Pan
The ASUS X412FA laptop contains a Realtek RTL8822CE device with an associated BT chip using a USB ID of 04ca:4005. This ID is added to the driver. The /sys/kernel/debug/usb/devices portion for this device is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4005 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-03netfilter: nf_flow_table: set default timeout after successful insertionPablo Neira Ayuso
Set up the default timeout for this new entry otherwise the garbage collector might quickly remove it right after the flowtable insertion. Fixes: ac2a66665e23 ("netfilter: add generic flow table infrastructure") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-03netfilter: ctnetlink: honor IPS_OFFLOAD flagPablo Neira Ayuso
If this flag is set, timeout and state are irrelevant to userspace. Fixes: 90964016e5d3 ("netfilter: nf_conntrack: add IPS_OFFLOAD status bit") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-03netfilter: nft_fib_netdev: Terminate rule eval if protocol=IPv6 and ipv6 ↵Leonardo Bras
module is disabled If IPv6 is disabled on boot (ipv6.disable=1), but nft_fib_inet ends up dealing with a IPv6 packet, it causes a kernel panic in fib6_node_lookup_1(), crashing in bad_page_fault. The panic is caused by trying to deference a very low address (0x38 in ppc64le), due to ipv6.fib6_main_tbl = NULL. BUG: Kernel NULL pointer dereference at 0x00000038 The kernel panic was reproduced in a host that disabled IPv6 on boot and have to process guest packets (coming from a bridge) using it's ip6tables. Terminate rule evaluation when packet protocol is IPv6 but the ipv6 module is not loaded. Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-03rsi: fix a double free bug in rsi_91x_deinit()Hui Peng
`dev` (struct rsi_91x_usbdev *) field of adapter (struct rsi_91x_usbdev *) is allocated and initialized in `rsi_init_usb_interface`. If any error is detected in information read from the device side, `rsi_init_usb_interface` will be freed. However, in the higher level error handling code in `rsi_probe`, if error is detected, `rsi_91x_deinit` is called again, in which `dev` will be freed again, resulting double free. This patch fixes the double free by removing the free operation on `dev` in `rsi_init_usb_interface`, because `rsi_91x_deinit` is also used in `rsi_disconnect`, in that code path, the `dev` field is not (and thus needs to be) freed. This bug was found in v4.19, but is also present in the latest version of kernel. Fixes CVE-2019-15504. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"Stanislaw Gruszka
This reverts commit 9ad3b55654455258a9463384edb40077439d879f. As reported by Sergey: "I got some problem after upgrade kernel to 5.2 version (debian testing linux-image-5.2.0-2-amd64). 5Ghz client stopped to see AP. Some tests with 1metre distance between client-AP: 2.4Ghz -22dBm, for 5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not visible." It was identified that rx signal level degradation was caused by 9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"). So revert this commit. Cc: <stable@vger.kernel.org> # v5.1+ Reported-and-tested-by: Sergey Maranchuk <slav0nic0@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rt2x00: clear up IV's on key removalStanislaw Gruszka
After looking at code I realized that my previous fix 95844124385e ("rt2x00: clear IV's on start to fix AP mode regression") was incomplete. We can still have wrong IV's after re-keyring. To fix that, clear up IV's also on key removal. Fixes: 710e6cc1595e ("rt2800: do not nullify initialization vector data") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> tested-by: Emil Karlson <jekarl@iki.fi> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03iwlwifi: assign directly to iwl_trans->cfg in QuZ detectionLuca Coelho
We were erroneously assigning the new configuration to a local variable cfg, but that was not being assigned to anything, so the change was getting lost. Assign directly to iwl_trans->cfg instead. Fixes: 5a8c31aa6357 ("iwlwifi: pcie: fix recognition of QuZ devices") Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2024-06-18 13:09:40 +0000