summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-02bus: mhi: core: Allow shared IRQ for event ringsLoic Poulain
There is no requirement for using a dedicated IRQ per event ring. Some systems does not support multiple MSI vectors (e.g. intel without CONFIG_IRQ_REMAP), In that case the MHI controller can configure all the event rings to use the same interrupt (as fallback). Allow this by removing the nr_irqs = ev_ring test and add extra check in the irq_setup function. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-17-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce sysfs entries for MHIBhaumik Bhatt
Introduce sysfs entries to enable userspace clients the ability to read the serial number and the OEM PK Hash values obtained from BHI. OEMs need to read these device-specific hardware information values through userspace for factory testing purposes and cannot be exposed via degbufs as it may remain disabled for performance reasons. Also, update the documentation for ABI to include these entries. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: used dev_groups to manage sysfs attributes] Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-16-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce debugfs entries for MHIBhaumik Bhatt
Introduce debugfs entries to show state, register, channel, device, and event rings information. Allow the host to dump registers, issue device wake, and change the MHI timeout to help in debug. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-15-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Fix entries based on Kconfig coding styleBhaumik Bhatt
Kconfig coding style mandates use of tabs for the configuration definition and an additional two spaces for the help text. Make the required changes to the MHI Kconfig adhering to those guidelines. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-14-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Remove include of rwlock_types.hClark Williams
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. Including it directly will break the RT build. Also there is no point in including _types.h headers directly. There is no benefit in including the type without the accessor. Fixes: 0cbf260820fa7 ("bus: mhi: core: Add support for registering MHI controllers") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Clark Williams <williams@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-13-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Add const qualifier to MHI config informationHemant Kumar
MHI channel, event and controller config data needs to be treated read only information. Add const qualifier to make sure config information passed by MHI controller is not modified by MHI core driver. Suggested-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-12-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce APIs to allocate and free the MHI controllerBhaumik Bhatt
Client devices should use the APIs provided to allocate and free the MHI controller structure. This will help ensure that the structure is zero-initialized and there are no false positives with respect to reading any values such as the serial number or the OEM PK hash. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Read and save device hardware information from BHIBhaumik Bhatt
Device hardware specific information such as serial number and the OEM PK hash can be read using BHI and saved on host to identify the endpoint. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce counters to track MHI device state transitionsBhaumik Bhatt
Use counters to track MHI device state transitions such as those to M0, M2, or M3 states. This can help in better debug, allowing the user to see the number of transitions to a certain MHI state when queried using debugfs entries or via other mechanisms. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-9-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce helper function to check device stateBhaumik Bhatt
Introduce a helper function to determine whether the device is in a powered ON state and resides in one of the active MHI states. This will allow for some use cases where access can be pre-determined. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Use generic name field for an MHI deviceBhaumik Bhatt
An MHI device is not necessarily associated with only channels as we can have one associated with the controller itself. Hence, the chan_name field within the mhi_device structure should instead be replaced with a generic name to accurately reflect any type of MHI device. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Trigger host resume if suspended during mhi_device_get()Bhaumik Bhatt
It is possible that the host may be suspending or suspended and may not allow an outgoing device wake assert immediately if a client has requested for it. Ensure that the host wakes up and allows for it so the client does not have to wait for an external trigger or an outgoing packet to be queued for the host resume to occur. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Use helper API to trigger a non-blocking host resumeBhaumik Bhatt
Autonomous low power mode support requires the MHI host to resume from multiple places and post a wakeup source to exit system suspend. This needs to be done in a non-blocking manner. Introduce a helper API to trigger the host resume for data transfers and other non-blocking use cases while supporting implementation of autonomous low power modes. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Abort suspends due to outgoing pending packetsBhaumik Bhatt
Add the missing check to abort suspends if a client driver has pending outgoing packets to send to the device. This allows better utilization of the MHI bus wherein clients on the host are not left waiting for longer suspend or resume cycles to finish for data transfers. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Remove double occurrence for mhi_ctrl_ev_task() declarationBhaumik Bhatt
mhi_ctrl_ev_task() in the internal header file occurred twice. Remove one of the occurrences for clean-up. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: fix doubled words and struct image_info kernel-docRandy Dunlap
Drop doubled word "table" in kernel-doc. Fix syntax for the kernel-doc notation for struct image_info. Note that the bhi_vec field is private and not part of the kernel-doc. Drop doubled word "device" in a comment. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: Added bus: prefix to the commit subject] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01Merge tag 'soundwire-5.10-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.10-rc1 This round of update includes: - Generic bandwidth allocation algorithm from Intel folks - PM support for Intel chipsets - Updates to Intel drivers which makes sdw usable on latest laptops - Support for MMIO SDW controllers found in QC chipsets - Update to subsystem to use helpers in bitfield.h to manage register bits * tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits) soundwire: sysfs: add slave status and device number before probe soundwire: bus: add enumerated Slave device to device list soundwire: remove an unnecessary NULL check soundwire: cadence: add data port test fail interrupt soundwire: intel: enable test modes soundwire: enable Data Port test modes soundwire: intel: use {u32|u16}p_replace_bits soundwire: cadence: use u32p_replace_bits soundwire: qcom: get max rows and cols info from compatible soundwire: qcom: add support to block packing mode soundwire: qcom: clear BIT FIELDs before value set. soundwire: Add generic bandwidth allocation algorithm soundwire: cadence: add parity error injection through debugfs soundwire: bus: export broadcast read/write capability for tests ASoC: codecs: realtek-soundwire: ignore initial PARITY errors soundwire: bus: use quirk to filter out invalid parity errors soundwire: slave: add first_interrupt_done status soundwire: bus: filter-out unwanted interrupt reports ASoC/soundwire: bus: use property to set interrupt masks soundwire: qcom: fix SLIBMUS/SLIMBUS typo ...
2020-09-30MAINTAINERS: exclude char maintainers from things they do not maintainGreg Kroah-Hartman
There are a number of subdirectories and files in drivers/char/ that have their own maintainers and developers and ways of getting patches to Linus. This includes random.c, IPMI, hardware random drivers, TPM drivers, and agp drivers. Instead of sending those patches to Arnd and myself, who can't do anything with them, send them to the proper developers instead. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20200930121007.GA1615300@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-30misc: mic: drop double zeroingJulia Lawall
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(struct scatterlist),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1600601186-7420-14-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-30habanalabs/gaudi: use correct define for qman initOded Gabbay
There was a copy-paste error, and the wrong define was used for initializing the QMAN. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Link: https://lore.kernel.org/r/20200925171415.25663-1-oded.gabbay@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-30extcon: axp288: Use module_platform_driver to simplify the codeLiu Shixin
module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-30extcon: ptn5150: Do not print error during probe if nothing is attachedKrzysztof Kozlowski
The commit 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") reused code for checking CC status register in the probe path to determine what is initially connected. However if nothing is connected, the CC status register will have 0x0 value and print an error message: ptn5150 1-003d: Unknown Port status : 0 This is not an error. Also any other unknown port status values are not really errors but unhandled cases. Fixes: 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-28coresight: etm4x: Fix save and restore of TRCVMIDCCTLR1 registerSai Prakash Ranjan
In commit f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states"), mistakenly TRCVMIDCCTLR1 register value was saved in trcvmidcctlr0 state variable which is used to store TRCVMIDCCTLR0 register value in etm4x_cpu_save() and then same value is written back to both TRCVMIDCCTLR0 and TRCVMIDCCTLR1 in etm4x_cpu_restore(). There is already a trcvmidcctlr1 state variable available for TRCVMIDCCTLR1, so use it. Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-26-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: core: Allow the coresight core driver to be built as a moduleTingwei Zhang
Enhance coresight developer's efficiency to debug coresight drivers. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight by the Makefile - modules can have only one init/exit, so we add the etm_perf register/unregister function calls to the core init/exit functions. - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-25-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: catu: Allow catu drivers to be built as modulesTingwei Zhang
Allow to build coresight-catu as modules, for ease of development. - Kconfig becomes a tristate, to allow =m - add catu_remove functions, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Reviewed-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-24-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: tmc-etr: Add function to register catu opsMian Yousaf Kaukab
Make etr_catu_buf_ops static. Instead of directly accessing it in etr_buf_ops[], add a function to let catu driver register the ops at runtime. Break circular dependency between tmc-etr and catu drivers. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-23-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cti: Allow cti to be built as a moduleTingwei Zhang
Allow to build coresight-cti as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight-cti by the Makefile - add an cti_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot - move cti_remove_conn_xrefs to cti_remove since all sysfs links have gone when system calls device_release. Reviewed-by Mike Leach <mike.leach@linaro.org> Tested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-22-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cti: Increase reference count when enabling ctiTingwei Zhang
CTI device is enabled when associated coresight device is enabled. Increase the module and device reference count for CTI device when it's enabled. This can prevent CTI device be removed or module be unloaded when CTI device is enabled by an active trace session. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-21-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cti: Don't disable ect device if it's not enabledTingwei Zhang
If associated ect device is not enabled at first place, disable routine should not be called. Add ect_enabled flag to check whether ect device is enabled. Fix the issue in below case. Ect device is not available when associated coresight device enabled and the association is established after coresight device is enabled. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-20-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cti: Fix bug clearing sysfs links on callbackMike Leach
During module unload, a coresight driver module will call back into the CTI driver to remove any links between the two devices. The current code has 2 issues:- 1) in the CTI driver the matching code is matching to the wrong device so misses all the links. 2) The callback is called too late in the unload process resulting in a crash. This fixes both the issues. Fixes: 177af8285b59 ("coresight: cti: Enable CTI associated with devices") Reported-by: Tingwei Zhang <tingwei@codeaurora.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-19-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cti: Fix remove sysfs link errorMike Leach
CTI code to remove sysfs link to other devices on shutdown, incorrectly tries to remove a single ended link when these are all double ended. This implementation leaves elements in the link info structure undefined which results in a crash in recent tests for driver module unload. This patch corrects the link removal code. Fixes: 73274abb6557 ("coresight: cti: Add in sysfs links to other coresight devices") Reported-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-18-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cti: Add function to register cti associate opsTingwei Zhang
Add static cti_assoc_ops to coresight core driver. Let cti driver register the add_assoc and remove_assoc call back. Avoid coresight core driver to depend on cti driver. Tested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-17-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: replicator: Allow replicator driver to be built as moduleKim Phillips
Allow to build coresight-replicator as modules, for ease of development. - Kconfig becomes a tristate, to allow =m - combine static and dynamic replicator init into single module_init/exit call - add replicator_remove functions, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Co-developed-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-16-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: funnel: Allow funnel driver to be built as moduleKim Phillips
Allow to build coresight-funnel as module, for ease of development. - combine static and dynamic funnel init into single module_init/exit call - add funnel_remove functions, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Co-developed-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-15-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: tmc: Allow tmc to be built as a moduleKim Phillips
Allow to build coresight-tmc as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight-tmc by the Makefile - add an tmc_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: tpiu: Allow tpiu to be built as a moduleKim Phillips
Allow to build coresight-tpiu as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - add a tpiu_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Reviewed-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-13-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: etb: Allow etb to be built as a moduleKim Phillips
Allow to build coresight-etb10 as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - add an etb_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-12-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: etm4x: Allow etm4x to be built as a moduleKim Phillips
Allow to build coresight-etm4x as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight-etm4x by the Makefile - add an etm4_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot - delay advertising the per-cpu etmdrvdata - protect etmdrvdata[] by modifying it on relevant CPU Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: etm3x: Allow etm3x to be built as a moduleKim Phillips
Allow to build coresight-etm3x as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight-etm3x by the Makefile - add an etm_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot - delay advertising the per-cpu etmdrvdata - protect etmdrvdata[] by modifying it on relevant CPU Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: etm: perf: Fix warning caused by etm_setup_aux failureTingwei Zhang
When coresight_build_path() fails on all the cpus, etm_setup_aux calls etm_free_aux() to free allocated event_data. WARN_ON(cpumask_empty(mask) will be triggered since cpu mask is empty. Check event_data->snk_config is not NULL first to avoid this warning. Fixes: f5200aa9831f38 ("coresight: perf: Refactor function free_event_data()") Reviewed-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: stm: Allow to build coresight-stm as a moduleTingwei Zhang
- Kconfig becomes a tristate, to allow =m - add a stm_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-8-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: Add try_get_module() in coresight_grab_device()Tingwei Zhang
When coresight device is in an active session, driver module of that device should not be removed. Use try_get_module() in coresight_grab_device() to prevent module to be unloaded. Use get_device()/put_device() to protect device data in the middle of active session. Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-7-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: Export global symbolsMian Yousaf Kaukab
Export symbols used among coresight modules. Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: Add coresight prefix to barrier_pktTingwei Zhang
Add coresight prefix to make it specific. It will be a export symbol. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: Use IS_ENABLED for CONFIGs that may be modulesKim Phillips
Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED that is true for both built-ins and modules, instead. Required when building coresight components as modules. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cpu_debug: Define MODULE_DEVICE_TABLETingwei Zhang
Define a MODULE_DEVICE_TABLE for cpu_debug so module can be auto loaded on boot. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28coresight: cpu_debug: Add module name in KconfigTingwei Zhang
Provide name of cpu_debug module in Kconfig help section. Tested-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-28soundwire: sysfs: add slave status and device number before probePierre-Louis Bossart
The MIPI DisCo device properties that are read by the driver from platform firmware, or hard-coded in the driver, should only be provided as sysfs entries when a driver probes successfully. However the device status and device number is updated even when there is no driver present, and hence can be updated when a Slave device is detected on the bus without being described in platform firmware and without any driver registered/probed. As suggested by GregKH, the attribute group for Slave status and device number is is added by default upon device registration. Credits to Vinod Koul for the status_show() function, shared in a separate patch and used as is here. The status table was modified to remove an unnecessary enum and status_show() is handled in a different group attribute than what was suggested by Vinod. Tested-by: Srinivas Kandgatla <srinivas.kandagatla@linaro.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Co-developed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200924194430.121058-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28soundwire: bus: add enumerated Slave device to device listSrinivas Kandagatla
Currently Slave devices are only added on startup, either from Device Tree or ACPI entries. However Slave devices that are physically present on the bus, but not described in platform firmware, will never be added to the device list. The user/integrator can only know the list of devices by looking a dynamic debug logs. This patch suggests adding a Slave device even if there is no matching DT or ACPI entry, so that we can see this in sysfs entry. Initial code from Srinivas. Comments, fixes for ACPI probe and edits of commit message by Pierre. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200924194430.121058-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-27nvmem: core: fix possibly memleak when use nvmem_cell_info_to_nvmem_cell()Vadym Kochan
Fix missing 'kfree_const(cell->name)' when call to nvmem_cell_info_to_nvmem_cell() in several places: * after nvmem_cell_info_to_nvmem_cell() failed during nvmem_add_cells() * during nvmem_device_cell_{read,write} when cell->name is kstrdup'ed() without calling kfree_const() at the end, but really there is no reason to do that 'dup, because the cell instance is allocated on the stack for some short period to be read/write without exposing it to the caller. So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced which is used to convert cell_info -> cell without name duplication as a lighweight version of nvmem_cell_info_to_nvmem_cell(). Fixes: e2a5402ec7c6 ("nvmem: Add nvmem_device based consumer apis.") Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20200923204456.14032-1-vadym.kochan@plvision.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-07-02 02:45:53 +0000