summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-11-24Merge tag 'vfs-6.7-rc3.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Avoid calling back into LSMs from vfs_getattr_nosec() calls. IMA used to query inode properties accessing raw inode fields without dedicated helpers. That was finally fixed a few releases ago by forcing IMA to use vfs_getattr_nosec() helpers. The goal of the vfs_getattr_nosec() helper is to query for attributes without calling into the LSM layer which would be quite problematic because incredibly IMA is called from __fput()... __fput() -> ima_file_free() What it does is to call back into the filesystem to update the file's IMA xattr. Querying the inode without using vfs_getattr_nosec() meant that IMA didn't handle stacking filesystems such as overlayfs correctly. So the switch to vfs_getattr_nosec() is quite correct. But the switch to vfs_getattr_nosec() revealed another bug when used on stacking filesystems: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() -> security_inode_getattr() # calls back into LSMs Now, if that __fput() happens from task_work_run() of an exiting task current->fs and various other pointer could already be NULL. So anything in the LSM layer relying on that not being NULL would be quite surprised. Fix that by passing the information that this is a security request through to the stacking filesystem by adding a new internal ATT_GETATTR_NOSEC flag. Now the callchain becomes: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> if (AT_GETATTR_NOSEC) vfs_getattr_nosec() else vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() - Fix a bug introduced with the iov_iter rework from last cycle. This broke /proc/kcore by copying too much and without the correct offset. - Add a missing NULL check when allocating the root inode in autofs_fill_super(). - Fix stable writes for multi-device filesystems (xfs, btrfs etc) and the block device pseudo filesystem. Stable writes used to be a superblock flag only, making it a per filesystem property. Add an additional AS_STABLE_WRITES mapping flag to allow for fine-grained control. - Ensure that offset_iterate_dir() returns 0 after reaching the end of a directory so it adheres to getdents() convention. * tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: libfs: getdents() should return 0 after reaching EOD xfs: respect the stable writes flag on the RT device xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags block: update the stable_writes flag in bdev_add filemap: add a per-mapping stable writes flag autofs: add: new_inode check in autofs_fill_super() iov_iter: fix copy_page_to_iter_nofault() fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
2023-11-24Merge tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Back to regular scheduled fixes pull request, mainly a bunch of msm, some i915 and otherwise a few scattered, one memory crasher in the nouveau GSP paths is helping stabilise that work. msm: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup i915: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path panel: - Fixes for innolux and auo,b101uan08.3 panel. - Fix Himax83102-j02 timings. ivpu: - Fix ivpu MMIO reset. ast: - AST fix on connetor disconnection. nouveau: - gsp memory corruption fix rockchip: - color fix" * tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm: nouveau/gsp: allocate enough space for all channel ids. drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP drm/ast: Disconnect BMC if physical connector is connected accel/ivpu/37xx: Fix hangs related to MMIO reset drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full drm/i915: do not clean GT table on error path drm/i915/dp_mst: Fix race between connector registration and setup drm/panel: simple: Fix Innolux G101ICE-L01 timings drm/panel: simple: Fix Innolux G101ICE-L01 bus flags drm/msm: remove unnecessary NULL check drm/panel: auo,b101uan08.3: Fine tune the panel power sequence drm/msm/dp: attach the DP subconnector property drm/msm/dp: don't touch DP subconnector property in eDP case drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog drm/msm: remove exra drm_kms_helper_poll_init() call drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy
2023-11-23Merge tag 'ata-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Add a missing error check in the adapter initialization of the pata_isapnp driver (Chen) * tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_isapnp: Add missing error check for devm_ioport_map()
2023-11-23Merge tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "A bit bigger than usual at this time, but nothing really earth shattering: - NVMe pull request via Keith: - TCP TLS fixes (Hannes) - Authentifaction fixes (Mark, Hannes) - Properly terminate target names (Christoph) - MD pull request via Song, fixing a raid5 corruption issue - Disentanglement of the dependency mess in nvme introduced with the tls additions. Now it should actually build on all configs (Arnd) - Series of bcache fixes (Coly) - Removal of a dead helper (Damien) - s390 dasd fix (Muhammad, Jan) - lockdep blk-cgroup fixes (Ming)" * tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits) nvme: tcp: fix compile-time checks for TLS mode nvme: target: fix Kconfig select statements nvme: target: fix nvme_keyring_id() references nvme: move nvme_stop_keep_alive() back to original position nbd: pass nbd_sock to nbd_read_reply() instead of index s390/dasd: protect device queue against concurrent access s390/dasd: resolve spelling mistake block/null_blk: Fix double blk_mq_start_request() warning nvmet-tcp: always initialize tls_handshake_tmo_work nvmet: nul-terminate the NQNs passed in the connect command nvme: blank out authentication fabrics options if not configured nvme: catch errors from nvme_configure_metadata() nvme-tcp: only evaluate 'tls' option if TLS is selected nvme-auth: set explanation code for failure2 msgs nvme-auth: unlock mutex in one place only block: Remove blk_set_runtime_active() nbd: fix null-ptr-dereference while accessing 'nbd->config' nbd: factor out a helper to get nbd_config without holding 'config_lock' nbd: fold nbd config initialization into nbd_alloc_config() bcache: avoid NULL checking to c->root in run_cache_set() ...
2023-11-23Merge tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A fix for ensuring that LINKAT always propagates flags correctly, and a fix for an off-by-one in segment skipping for registered buffers. Both heading to stable as well" * tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux: io_uring: fix off-by one bvec index io_uring/fs: consider link->flags when getting path for LINKAT
2023-11-23Merge tag 'for-linus-2023112301' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - revert of commit that caused regression to many Logitech unifying receiver users (Jiri Kosina) - power management fix for hid-mcp2221 (Hamish Martin) - fix for race condition between HID core and HID debug (Charles Yi) - a couple of assorted device-ID-specific quirks * tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad HID: hid-asus: reset the backlight brightness level on resume HID: hid-asus: add const to read-only outgoing usb buffer Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration" HID: add ALWAYS_POLL quirk for Apple kb HID: glorious: fix Glorious Model I HID report HID: fix HID device resource race between HID core and debugging support HID: apple: add Jamesdonkey and A3R to non-apple keyboards list HID: mcp2221: Allow IO to start during probe HID: mcp2221: Set driver data before I2C adapter add
2023-11-24Merge tag 'drm-intel-fixes-2023-11-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.7-rc3: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y1eol98h.fsf@intel.com
2023-11-24Merge tag 'drm-misc-fixes-2023-11-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v6.7-rc3: - Panel fixes for innolux and auo,b101uan08.3 panel. - Fix ivpu MMIO reset. - AST fix on connetor disconnection. - nouveau gsp fix. - rockchip color fix. - Fix Himax83102-j02 timings. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/12322257-2e0c-43d3-8241-876aafc10e4a@linux.intel.com
2023-11-24Merge tag 'drm-msm-fixes-2023-11-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.7-rc3: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com
2023-11-23Merge tag 'net-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ...
2023-11-23tools: ynl: fix duplicate op name in devlinkJakub Kicinski
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23tools: ynl: fix header path for nfsdJakub Kicinski
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23net: ipa: fix one GSI register field widthAlex Elder
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23tls: fix NULL deref on tls_sw_splice_eof() with empty recordJann Horn
syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush") Cc: stable@vger.kernel.org Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23net: axienet: Fix check for partial TX checksumSamuel Holland
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23vsock/test: fix SEQPACKET message bounds testArseniy Krasnov
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23Merge branch 'ice-restore-timestamp-config-after-reset'Paolo Abeni
Tony Nguyen says: ==================== ice: restore timestamp config after reset Jake Keller says: We recently discovered during internal validation that the ice driver has not been properly restoring Tx timestamp configuration after a device reset, which resulted in application failures after a device reset. After some digging, it turned out this problem is two-fold. Since the introduction of the PTP support the driver has been clobbering the storage of the current timestamp configuration during reset. Thus after a reset, the driver will no longer perform Tx or Rx timestamps, and will report timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued. In addition, the recently merged auxiliary bus support code missed that PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices. Failure to restore this register configuration results in the driver no longer responding to interrupts from other ports. Depending on the traffic pattern, this can either result in increased latency responding to timestamps on the non-owner ports, or it can result in the driver never reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done during initialization. Due to this, the Tx timestamp issue persists even if userspace reconfigures timestamping. This series fixes both issues, as well as removes a redundant Tx ring field since we can rely on the skb flag as the primary detector for a Tx timestamp request. Note that I don't think this series will directly apply to older stable releases (even v6.6) as we recently refactored a lot of the PTP code to support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus implementation. The principle of patch 1/3 and 3/3 could apply as far back as the initial PTP support, but I don't think it will apply cleanly as-is. ==================== Link: https://lore.kernel.org/r/20231121211259.3348630-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23Merge branch 'amd-xgbe-fixes-to-handle-corner-cases'Paolo Abeni
Raju Rangoju says: ==================== amd-xgbe: fixes to handle corner-cases This series include bug fixes to amd-xgbe driver. ==================== Link: https://lore.kernel.org/r/20231121191435.4049995-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: propagate the correct speed and duplex statusRaju Rangoju
xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle the corner-case during tx completionRaju Rangoju
The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle corner-case during sfp hotplugRaju Rangoju
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23net: veth: fix ethtool stats reportingLorenzo Bianconi
Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx ↵Suman Ghosh
queue than its PF It is possible to add a ntuple rule which would like to direct packet to a VF whose number of queues are greater/less than its PF's queue numbers. For example a PF can have 2 Rx queues but a VF created on that PF can have 8 Rx queues. As of today, ntuple rule will reject rule because it is checking the requested queue number against PF's number of Rx queues. As a part of this fix if the action of a ntuple rule is to move a packet to a VF's queue then the check is removed. Also, a debug information is printed to aware user that it is user's responsibility to cross check if the requested queue number on that VF is a valid one. Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23net: usb: qmi_wwan: claim interface 4 for ZTE MF290Lech Perczak
Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-22nvme: tcp: fix compile-time checks for TLS modeArnd Bergmann
When CONFIG_NVME_KEYRING is enabled as a loadable module, but the TCP host code is built-in, it fails to link: arm-linux-gnueabi-ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl': tcp.c:(.text+0x1940): undefined reference to `nvme_tls_psk_default' The problem is that the compile-time conditionals are inconsistent here, using a mix of #ifdef CONFIG_NVME_TCP_TLS, IS_ENABLED(CONFIG_NVME_TCP_TLS) and IS_ENABLED(CONFIG_NVME_KEYRING) checks, with CONFIG_NVME_KEYRING controlling whether the implementation is actually built. Change it to use IS_ENABLED(CONFIG_NVME_KEYRING) checks consistently, which should help readability and make it less error-prone. Combining it with the check for the ctrl->opts->tls flag lets the compiler drop all the TLS code in configurations without this feature, which also helps runtime behavior in addition to avoiding the link failure. To make it possible for the compiler to build the dead code, both the tls_handshake_timeout variable and the TLS specific members of nvme_tcp_queue need to be moved out of the #ifdef block as well, but at least the former of these gets optimized out again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231122224719.4042108-4-arnd@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-22nvme: target: fix Kconfig select statementsArnd Bergmann
When the NVME target code is built-in but its TCP frontend is a loadable module, enabling keyring support causes a link failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id' The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from it inherits the state of the tristate symbol rather than the intended CONFIG_NVME_TARGET one that contains the actual call. The same thing is true for CONFIG_KEYS, which itself is required for NVME_KEYRING. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231122224719.4042108-3-arnd@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-22nvme: target: fix nvme_keyring_id() referencesArnd Bergmann
In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring code might not be available, or using it will result in a runtime failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id' Add a check to ensure we only check the keyring if there is a chance of it being used, which avoids both the runtime and link-time problems. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231122224719.4042108-2-arnd@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-22Merge tag 'loongarch-fixes-6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix several build errors, a potential kernel panic, a cpu hotplug issue and update links in documentations" * tag 'loongarch-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: Docs/zh_CN/LoongArch: Update links in LoongArch introduction.rst Docs/LoongArch: Update links in LoongArch introduction.rst LoongArch: Implement constant timer shutdown interface LoongArch: Mark {dmw,tlb}_virt_to_page() exports as non-GPL LoongArch: Silence the boot warning about 'nokaslr' LoongArch: Add __percpu annotation for __percpu_read()/__percpu_write() LoongArch: Record pc instead of offset in la_abs relocation LoongArch: Explicitly set -fdirect-access-external-data for vmlinux LoongArch: Add dependency between vmlinuz.efi and vmlinux.efi
2023-11-22Merge tag 'hyperv-fixes-signed-20231121' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - One fix for the KVP daemon (Ani Sinha) - Fix for the detection of E820_TYPE_PRAM in a Gen2 VM (Saurabh Sengar) - Micro-optimization for hv_nmi_unknown() (Uros Bizjak) * tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown() x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
2023-11-22asm-generic: qspinlock: fix queued_spin_value_unlocked() implementationLinus Torvalds
We really don't want to do atomic_read() or anything like that, since we already have the value, not the lock. The whole point of this is that we've loaded the lock from memory, and we want to check whether the value we loaded was a locked one or not. The main use of this is the lockref code, which loads both the lock and the reference count in one atomic operation, and then works on that combined value. With the atomic_read(), the compiler would pointlessly spill the value to the stack, in order to then be able to read it back "atomically". This is the qspinlock version of commit c6f4a9002252 ("asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same bug for ticket locks. Cc: Guo Ren <guoren@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Waiman Long <longman@redhat.com> Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-11-22Merge tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme into block-6.7Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.7 - TCP TLS fixes (Hannes) - Authentifaction fixes (Mark, Hannes) - Properly terminate target names (Christoph)" * tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme: nvme: move nvme_stop_keep_alive() back to original position nvmet-tcp: always initialize tls_handshake_tmo_work nvmet: nul-terminate the NQNs passed in the connect command nvme: blank out authentication fabrics options if not configured nvme: catch errors from nvme_configure_metadata() nvme-tcp: only evaluate 'tls' option if TLS is selected nvme-auth: set explanation code for failure2 msgs nvme-auth: unlock mutex in one place only
2023-11-22nvme: move nvme_stop_keep_alive() back to original positionHannes Reinecke
Stopping keep-alive not only stops the keep-alive workqueue, but also needs to be synchronized with I/O termination as we must not send a keep-alive command after all I/O had been terminated. So to avoid any regressions move the call to stop_keep_alive() back to its original position and ensure that keep-alive is correctly stopped failing to setup the admin queue. Fixes: 4733b65d82bd ("nvme: start keep-alive after admin queue setup") Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-11-22Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"Heiner Kallweit
This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df. I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-22net/smc: avoid data corruption caused by declineD. Wythe
We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution. Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-22nfc: virtual_ncidev: Add variable to check if ndev is runningNguyen Dinh Phi
syzbot reported an memory leak that happens when an skb is add to send_buff after virtual nci closed. This patch adds a variable to track if the ndev is running before handling new skb in send function. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+6eb09d75211863f15e3e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/00000000000075472b06007df4fb@google.com Reviewed-by: Bongsu Jeon Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-22HID: multitouch: Add quirk for HONOR GLO-GXXX touchpadAoba K
Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device. The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX. Signed-off-by: Aoba K <nexp_0x17@outlook.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-11-22HID: hid-asus: reset the backlight brightness level on resumeDenis Benato
Some devices managed by this driver automatically set brightness to 0 before entering a suspended state and reset it back to a default brightness level after the resume: this has the effect of having the kernel report wrong brightness status after a sleep, and on some devices (like the Asus RC71L) that brightness is the intensity of LEDs directly facing the user. Fix the above issue by setting back brightness to the level it had before entering a sleep state. Signed-off-by: Denis Benato <benato.denis96@gmail.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-11-22HID: hid-asus: add const to read-only outgoing usb bufferDenis Benato
In the function asus_kbd_set_report the parameter buf is read-only as it gets copied in a memory portion suitable for USB transfer, but the parameter is not marked as const: add the missing const and mark const immutable buffers passed to that function. Signed-off-by: Denis Benato <benato.denis96@gmail.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-11-22x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown()Uros Bizjak
Use atomic_try_cmpxchg() instead of atomic_cmpxchg(*ptr, old, new) == old in hv_nmi_unknown(). On x86 the CMPXCHG instruction returns success in the ZF flag, so this change saves a compare after CMPXCHG. The generated asm code improves from: 3e: 65 8b 15 00 00 00 00 mov %gs:0x0(%rip),%edx 45: b8 ff ff ff ff mov $0xffffffff,%eax 4a: f0 0f b1 15 00 00 00 lock cmpxchg %edx,0x0(%rip) 51: 00 52: 83 f8 ff cmp $0xffffffff,%eax 55: 0f 95 c0 setne %al to: 3e: 65 8b 15 00 00 00 00 mov %gs:0x0(%rip),%edx 45: b8 ff ff ff ff mov $0xffffffff,%eax 4a: f0 0f b1 15 00 00 00 lock cmpxchg %edx,0x0(%rip) 51: 00 52: 0f 95 c0 setne %al No functional change intended. Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20231114170038.381634-1-ubizjak@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20231114170038.381634-1-ubizjak@gmail.com>
2023-11-21dpll: Fix potential msg memleak when genlmsg_put_reply failedHao Ge
We should clean the skb resource if genlmsg_put_reply failed. Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Hao Ge <gehao@kylinos.cn> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20231121013709.73323-1-gehao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-21Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-11-21 We've added 19 non-merge commits during the last 4 day(s) which contain a total of 18 files changed, 1043 insertions(+), 416 deletions(-). The main changes are: 1) Fix BPF verifier to validate callbacks as if they are called an unknown number of times in order to fix not detecting some unsafe programs, from Eduard Zingerman. 2) Fix bpf_redirect_peer() handling which missed proper stats accounting for veth and netkit and also generally fix missing stats for the latter, from Peilin Ye, Daniel Borkmann et al. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: check if max number of bpf_loop iterations is tracked bpf: keep track of max number of bpf_loop callback iterations selftests/bpf: test widening for iterating callbacks bpf: widening for callback iterators selftests/bpf: tests for iterating callbacks bpf: verify callbacks as if they are called unknown number of times bpf: extract setup_func_entry() utility function bpf: extract __check_reg_arg() utility function selftests/bpf: fix bpf_loop_bench for new callback verification scheme selftests/bpf: track string payload offset as scalar in strobemeta selftests/bpf: track tcp payload offset as scalar in xdp_synproxy selftests/bpf: Add netkit to tc_redirect selftest selftests/bpf: De-veth-ize the tc_redirect test case bpf, netkit: Add indirect call wrapper for fetching peer dev bpf: Fix dev's rx stats for bpf_redirect_peer traffic veth: Use tstats per-CPU traffic counters netkit: Add tstats per-CPU traffic counters net: Move {l,t,d}stats allocation to core and convert veth & vrf net, vrf: Move dstats structure to core ==================== Link: https://lore.kernel.org/r/20231121193113.11796-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-21docs: netdev: try to guide people on dealing with silenceJakub Kicinski
There has been more than a few threads which went idle before the merge window and now people came back to them and started asking about next steps. We currently tell people to be patient and not to repost too often. Our "not too often", however, is still a few orders of magnitude faster than other subsystems. Or so I feel after hearing people talk about review rates at LPC. Clarify in the doc that if the discussion went idle for a week on netdev, 95% of the time there's no point waiting longer. Link: https://lore.kernel.org/r/20231120200109.620392-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-21net: usb: ax88179_178a: fix failed operations during ax88179_resetJose Ignacio Tornos Martinez
Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, the following test cycle has been implemented: - power on - check logs - shutdown - after detecting the system shutdown, disconnect power - after approximately 60 seconds of sleep, power is restored Running some cycles, sometimes error logs like this appear: kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 ... These failed operation are happening during ax88179_reset execution, so the initialization could not be correct. In order to avoid this, we need to increase the delay after reset and clock initial operations. By using these larger values, many cycles have been run and no failed operations appear. It would be better to check some status register to verify when the operation has finished, but I do not have found any available information (neither in the public datasheets nor in the manufacturer's driver). The only available information for the necessary delays is the maufacturer's driver (original values) but the proposed values are not enough for the tested devices. Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Reported-by: Herb Wei <weihao.bj@ieisystem.com> Tested-by: Herb Wei <weihao.bj@ieisystem.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-21nouveau/gsp: allocate enough space for all channel ids.Dave Airlie
This probably isn't the ideal fix, but we ended up using chids sparsely, and lots of things rely on indexing into the full range, so just allocate the full range up front. The GSP code fixes 8 channels into a userd page, but we end up using a single userd page per channel so end up sparsely using the range. Fixes a few crashes seen with multiple channels. Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121201109.2988516-1-airlied@gmail.com
2023-11-21Merge tag 'platform-drivers-x86-v6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Ilpo Järvinen: "Just a few fixes (one with two non-fix deps) plus tidying up MAINTAINERS" * tag 'platform-drivers-x86-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: intel_telemetry: Fix kernel doc descriptions MAINTAINERS: Drop Mark Gross as maintainer for x86 platform drivers platform/x86/amd/pmc: adjust getting DRAM size behavior platform/x86: hp-bioscfg: Remove unused obj in hp_add_other_attributes() platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes() platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes() platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes() platform/x86: ideapad-laptop: Set max_brightness before using it MAINTAINERS: Remove stale entry for SBL platform driver
2023-11-21Merge tag 'erofs-for-6.7-rc3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: - Tidy up erofs_read_inode() for simplicity - Fix broken fscache mode due to NULL dereference of dif->bdev_handle - Add the EROFS webpage to MAINTAINERS, documentation, and Kconfig * tag 'erofs-for-6.7-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: MAINTAINERS: erofs: add EROFS webpage erofs: fix NULL dereference of dif->bdev_handle in fscache mode erofs: simplify erofs_read_inode()
generated by cgit (git 2.34.1) at 2024-06-28 17:01:26 +0000