summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-28block, scheduler: convert xxx_var_store to voidweiping zhang
The last parameter "count" never be used in xxx_var_store, convert these functions to void. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25skd: Remove SKD_ID_INCRBart Van Assche
The SKD_ID_INCR flag in skd_request_context.id duplicates information that is already available otherwise, e.g. through the block layer request state and through skd_request_context.state. Hence remove the code that manipulates this flag and also the flag itself. Since skd_isr_completion_posted() only uses the lower bits of skd_request_context.id as hardware tag, this patch does not change the behavior of the skd driver. I'm referring to the following code: tag = req_id & SKD_ID_SLOT_AND_TABLE_MASK; Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25skd: Make it easier for static analyzers to analyze skd_free_disk()Bart Van Assche
Although it is easy to see that skdev->disk != NULL if skdev->queue != NULL, add a test for skdev->disk to avoid that smatch reports the following warning: drivers/block/skd_main.c:3080 skd_free_disk() error: we previously assumed 'disk' could be null (see line 3074) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25skd: Inline skd_end_request()Bart Van Assche
It is not worth to keep the debug statements in skd_end_request(). Without debug statements that function only consists of two statements. Hence inline skd_end_request(). Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25skd: Rename skd_softirq_done() into skd_complete_rq()Bart Van Assche
The latter name follows more closely the function names used in other blk-mq drivers. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25block/nullb: fix NULL dereferenceShaohua Li
Dan reported this: The patch 2984c8684f96: "nullb: factor disk parameters" from Aug 14, 2017, leads to the following Smatch complaint: drivers/block/null_blk.c:1759 null_init_tag_set() error: we previously assumed 'nullb' could be null (see line 1750) 1755 set->cmd_size = sizeof(struct nullb_cmd); 1756 set->flags = BLK_MQ_F_SHOULD_MERGE; 1757 set->driver_data = NULL; 1758 1759 if (nullb->dev->blocking) ^^^^^^^^^^^^^^^^^^^^ And an unchecked dereference. nullb could be NULL here. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25blkcg: avoid free blkcg_root when failed to alloc blkcg policyweiping zhang
this patch fix two errors, firstly avoid kfree blk_root, secondly not free(blkcg) ,if blkcg alloc fail(blkcg == NULL), just unlock that mutex; Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25null_blk: update email adressJens Axboe
Update to a working one, the fusionio address hasn't been valid in 4 years. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25block: update comments to reflect REQ_FLUSH -> REQ_PREFLUSH renameOmar Sandoval
Normally I wouldn't bother with this, but in my opinion the comments are the most important part of this whole file since without them no one would have any clue how this insanity works. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-24compat_hdio_ioctl: Fix a declarationBart Van Assche
This patch avoids that sparse reports the following warning messages: block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces) block/compat_ioctl.c:85:11: expected unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:85:11: got void [noderef] <asn:1>* block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces) block/compat_ioctl.c:91:21: expected void const volatile [noderef] <asn:1>*<noident> block/compat_ioctl.c:91:21: got unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:87:53: warning: dereference of noderef expression block/compat_ioctl.c:91:21: warning: dereference of noderef expression Fixes: commit d597580d3737 ("generic ...copy_..._user primitives") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-24block: remove blk_free_devt in add_partitionweiping zhang
put_device(pdev) will call pdev->type->release finally, and blk_free_devt has been called in part_release(), so remove it. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-24bio-integrity: Fix regression if profile verify_fn is NULLMilan Broz
In dm-integrity target we register integrity profile that have both generate_fn and verify_fn callbacks set to NULL. This is used if dm-integrity is stacked under a dm-crypt device for authenticated encryption (integrity payload contains authentication tag and IV seed). In this case the verification is done through own crypto API processing inside dm-crypt; integrity profile is only holder of these data. (And memory is owned by dm-crypt as well.) After the commit (and previous changes) Commit 7c20f11680a441df09de7235206f70115fbf6290 Author: Christoph Hellwig <hch@lst.de> Date: Mon Jul 3 16:58:43 2017 -0600 bio-integrity: stop abusing bi_end_io we get this crash: : BUG: unable to handle kernel NULL pointer dereference at (null) : IP: (null) : *pde = 00000000 ... : : Workqueue: kintegrityd bio_integrity_verify_fn : task: f48ae180 task.stack: f4b5c000 : EIP: (null) : EFLAGS: 00210286 CPU: 0 : EAX: f4b5debc EBX: 00001000 ECX: 00000001 EDX: 00000000 : ESI: 00001000 EDI: ed25f000 EBP: f4b5dee8 ESP: f4b5dea4 : DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 : CR0: 80050033 CR2: 00000000 CR3: 32823000 CR4: 001406d0 : Call Trace: : ? bio_integrity_process+0xe3/0x1e0 : bio_integrity_verify_fn+0xea/0x150 : process_one_work+0x1c7/0x5c0 : worker_thread+0x39/0x380 : kthread+0xd6/0x110 : ? process_one_work+0x5c0/0x5c0 : ? kthread_worker_fn+0x100/0x100 : ? kthread_worker_fn+0x100/0x100 : ret_from_fork+0x19/0x24 : Code: Bad EIP value. : EIP: (null) SS:ESP: 0068:f4b5dea4 : CR2: 0000000000000000 Patch just skip the whole verify workqueue if verify_fn is set to NULL. Fixes: 7c20f116 ("bio-integrity: stop abusing bi_end_io") Signed-off-by: Milan Broz <gmazyland@gmail.com> [hch: trivial whitespace fix] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block, bfq: fix error handle in bfq_initweiping zhang
if elv_register fail, bfq_pool should be free. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: cache the partition index in struct block_deviceChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: add a __disk_get_part helperChristoph Hellwig
This helper allows looking up a partion under RCU protection without grabbing a reference to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: reject attempts to allocate more than DISK_MAX_PARTS partitionsChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23raid5: remove a call to get_start_sectChristoph Hellwig
The block layer always remaps partitions before calling into the ->make_request methods of drivers. Thus the call to get_start_sect in in_chunk_boundary will always return 0 and can be removed. Reviewed-by: Shaohua Li <shli@fb.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23btrfs: index check-integrity state hash by a dev_tChristoph Hellwig
We won't have the struct block_device available in the bio soon, so switch to the numerical dev_t instead of the block_device pointer for looking up the check-integrity state. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23skd: Change default interrupt mode to MSI-XBart Van Assche
Since MSI support on some motherboards is unreliable, change the default interrupt mode from MSI to MSI-X. This patch avoids that the following message appears sporadially in the kernel logs of my test setup: do_IRQ: 3.193 No irq handler for vector Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23skd: Avoid double completions in case of a timeoutBart Van Assche
Avoid that normal request completion and the timeout handler can run concurrently by calling blk_mq_complete_request() instead of blk_mq_end_request() from skd_end_request(). Avoid that the block layer can reuse a request while the firmware is still processing it. Convert skd_softirq_done() to blk-mq. Pass the pointer to skd_softirq_done() to the block layer core through blk_mq_ops.complete instead of by calling blk_queue_softirq_done(). Pass the pointer to skd_timed_out() to the block layer core through blk_mq_ops.timeout instead of by calling blk_queue_timed_out(). The timeout handler has been tested as follows: echo 1 > /sys/block/skd0/io-timeout-fail && (cd /sys/kernel/debug/fail_io_timeout && echo 100 > probability && echo N > task-filter && echo 1 > times) Fixes: commit a74d5b76fab9 ("skd: Switch to block layer timeout mechanism") Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23skd: Inline skd_process_request()Bart Van Assche
This patch does not change any functionality but makes the skd driver code more similar to that of other blk-mq kernel drivers. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23skd: Report completion mismatches onceBart Van Assche
This patch removes one debug statement but otherwise does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: Warn if blk_queue_rq_timed_out() is called for a blk-mq queueBart Van Assche
The timeout handler set by blk_queue_rq_timed_out() is only used in single queue mode. Calling this function for blk-mq drivers is wrong. Hence issue a warning if this function is called by a blk-mq driver. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: badbblocks supportShaohua Li
Sometime disk could have tracks broken and data there is inaccessable, but data in other parts can be accessed in normal way. MD RAID supports such disks. But we don't have a good way to test it, because we can't control which part of a physical disk is bad. For a virtual disk, this can be easily controlled. This patch adds a new 'badblock' attribute. Configure it in this way: echo "+1-100" > xxx/badblock, this will make sector [1-100] as bad blocks. echo "-20-30" > xxx/badblock, this will make sector [20-30] good If badblocks are accessed, the nullb disk will return IO error. Other parts of the disk can accessed in normal way. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: emulate cacheShaohua Li
Software must flush disk cache to guarantee data safety. To check if software correctly does disk cache flush, we must know the behavior of disk. But physical disk behavior is uncontrollable. Even software doesn't do the flush, the disk probably does the flush. This patch tries to emulate a cache in the test disk. All write will go to a cache first, when the cache is full, we then flush some data to disk storage. A flush request will flush all data of the cache to disk storage. A FUA write will write to memory store directly and revalidate data in cache. If there is a power failure (by writing to power attribute, 'echo 0 > disk_name/power'), we discard all data in the cache, but preserve the data in disk storage. Later we can power on the disk again as usual (write 1 to 'power' attribute), then we can check data integrity and very if software does everything correctly. A new attribute 'cache_size' (in MB) is added to configure cache size. Based on original patch from Kyungchan Koh Signed-off-by: Kyungchan Koh <kkc6196@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: bandwidth controlShaohua Li
In test, we usually expect controllable disk speed. For example, in a raid array, we'd like some disks are fast and some are slow. MD RAID actually has a feature for this. To test the feature, we'd like to make the disk run in specific speed. block throttling probably can be used for this purpose, but it requires cgroup setup. Here we just implement a simple throttling mechanism in the driver. There is slight fluctuation in the mechanism, but it's good enough for test. To configure the bandwidth cap, user sets the 'mbps' attribute. mbps is MB/s. Based on original patch from Kyungchan Koh Signed-off-by: Kyungchan Koh <kkc6196@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: support discardShaohua Li
discard makes sense for memory backed disk. And also it's useful to test if upper layer supports dicard correctly. User configures 'discard' attribute to enable/disable dicard support. Based on original patch from Kyungchan Koh Signed-off-by: Kyungchan Koh <kkc6196@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: support memory backed storeShaohua Li
This adds memory backed store in nullb. User configure 'memory_backed' attribute for this. By default, nullb disk doesn't use memory backed store. Based on original patch from Kyungchan Koh Signed-off-by: Kyungchan Koh <kkc6196@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: use ida to manage indexShaohua Li
We now dynamically create disks. Managing the disk index with ida to avoid bump up the index too much. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: add interface to power on diskShaohua Li
The device created in nullb configfs interface isn't power on by default. After user configures the device, user can do 'echo 1 > xxx/nullb/device_name/power' to power on the device, which will create a disk. the xxx/nullb/device_name/index is the disk index, so if the index is 2, the new created disk should be named as /dev/nullb2. Note, the 'index' is only valid after disk is power on. 'echo 0 > xxx/nullb/device_name/power' will remove the disk. Note, this doesn't remove the device. To remove the device, user should do 'rmdir xxx/nullb/device_name'. Removing the device will remove the disk too. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: add configfs interfaceShaohua Li
Add configfs interface for nullb. configfs interface is more flexible and easy to configure in a per-disk basis. Configuration is something like this: mount -t configfs none /mnt Checking which features the driver supports: cat /mnt/nullb/features The 'features' attribute is for future extension. We probably will add new features into the driver, userspace can check this attribute to find the supported features. Create/remove a device: mkdir/rmdir /mnt/nullb/a Then configure the device by setting attributes under /mnt/nullb/a, most of nullb supported module parameters are converted to attributes: size; /* device size in MB */ completion_nsec; /* time in ns to complete a request */ submit_queues; /* number of submission queues */ home_node; /* home node for the device */ queue_mode; /* block interface */ blocksize; /* block size */ irqmode; /* IRQ completion handler */ hw_queue_depth; /* queue depth */ use_lightnvm; /* register as a LightNVM device */ blocking; /* blocking blk-mq device */ use_per_node_hctx; /* use per-node allocation for hardware context */ Note, creating a device doesn't create a disk immediately. Creating a disk is done in two phases: create a device and then power on the device. Next patch will introduce device power on. Based on original patch from Kyungchan Koh Signed-off-by: Kyungchan Koh <kkc6196@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23nullb: factor disk parametersShaohua Li
When we switch to configfs interface, each disk could have different configuration. To prepare for the change, we move most disk setting to a separate data structure. The existing module parameter interface is kept. The 'nr_devices' and 'shared_tags' don't make sense for per-disk setting, so they are remained as global settings. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23skd: error pointer dereference in skd_cons_disk()Dan Carpenter
My initial impulse was to check for IS_ERR_OR_NULL() but when I looked at this code a bit more closely, we should only need to check for IS_ERR(). The blk_mq_alloc_tag_set() returns negative error codes and zero on success so we can just do an "if (rc) goto err_out;". It's better to preserve the error code anyhow. The blk_mq_init_queue() returns error pointers on failure, it never returns NULL. We can also remove the "q = NULL;" at the start because that's no longer needed. Fixes: ca33dd92968b ("skd: Convert to blk-mq") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23skd: Uninitialized variable in skd_isr_completion_posted()Dan Carpenter
Someone got too agressive about removing initializations and accidentally removed the "rc = 0;" which is required. Fixes: c830da8cbc7b ("skd: Remove superfluous initializations from skd_isr_completion_posted()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Remove driver version informationBart Van Assche
Remove the driver version information because this information is not useful in an upstream kernel driver. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Bump driver versionBart Van Assche
Bump the driver version. Remove the build ID because build IDs do not make sense for an upstream kernel driver. Keep the driver version in the module information but do not report it during every load, unload or probe. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Optimize lockingBart Van Assche
Only take skdev->lock if necessary. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Remove several local variablesBart Van Assche
This patch does not change any functionality but makes the code more brief. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Reduce memory usageBart Van Assche
Every single coherent DMA memory buffer occupies at least one page. Reduce memory usage by switching from coherent buffers to streaming DMA for I/O requests (struct skd_fitmsg_context) and S/G-lists (struct fit_sg_descriptor[]). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Remove skd_device.in_flightBart Van Assche
Since skd_device.in_flight is only used to display the number of in-flight requests in debug messages, remove that member and introduce skd_in_flight(). That last function relies on the block layer to determine the number of in flight requests. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Switch to block layer timeout mechanismBart Van Assche
Remove the timeout slot variables and rely on the block layer to detect request timeouts. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Convert to blk-mqBart Van Assche
Introduce a tag set and a blk_mq_ops structure. Set .cmd_size such that struct request and struct skd_request_context are allocated through a single allocation. Remove the skd_request_context.req pointer. Make queue starting asynchronous such that this can occur safely from interrupt context. Use locking to protect skdev->skmsg and *skdev->skmsg against concurrent access from concurrent .queue_rq() calls. Introduce the functions skd_init_request() and skd_exit_request() to set up / clean up the per-request S/G-list. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Coalesce struct request and struct skd_request_contextBart Van Assche
Set request_queue.cmd_size, introduce skd_init_rq() and skd_exit_rq() and remove skd_device.skreq_table. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Move skd_free_sg_list() upBart Van Assche
Issue a warning if a NULL argument is passed to skd_free_sg_list(). Move this function up to make the blk-mq conversion patch easier to read. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Split skd_recover_requests()Bart Van Assche
This patch does not change any functionality but makes the blk-mq conversion patch easier to read. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Introduce skd_process_request()Bart Van Assche
The only functional change in this patch is that the skd_fitmsg_context in which requests are accumulated is changed from a local variable into a member of struct skd_device. This patch will make the blk-mq conversion easier. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Convert several per-device scalar variables into atomicsBart Van Assche
Convert the per-device scalar variables that are protected by the queue lock into atomics such that it becomes safe to access these variables without holding the queue lock. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Enable request tags for the block layer queueBart Van Assche
Use the request tag when allocating a skd_fitmsg_context or skd_request_context such that the lists used to track free elements can be eliminated. Swap the skd_end_request() and skd_release_req() calls to avoid triggering a use-after-free. Remove skd_fitmsg_context.state and .outstanding because FIT messages are shared among requests and because updating a FIT message after a request has finished whould trigger a use-after-free. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-18skd: Initialize skd_special_context.req.n_sg to oneBart Van Assche
The debug code in skd_send_special_fitmsg() assumes that req.n_sg represents the number of S/G descriptors. However, skd_construct() initializes that member variable to zero. Set req.n_sg to one such that the debugging code in skd_send_special_fitmsg() works as expected. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2024-07-06 17:30:17 +0000