summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-16pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show()Markus Elfring
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value callSean Wang
Make consistent error handling of all mtk_hw_get_value occurrences using propagating error code from the internal instead of creating a new one. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11pinctrl: mediatek: mt7622: fix potential uninitialized value being returnedSean Wang
commit d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") leads to the following static checker warning: drivers/pinctrl/mediatek/pinctrl-mt7622.c:1419 mtk_gpio_get() error: uninitialized symbol 'value'. 1412 static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio) 1413 { 1414 struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent); 1415 int value; 1416 1417 mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value); ^^^^^^^^^^^^^^^^ 1418 1419 return !!value; 1420 } The appropriate error handling must be added to avoid the potential error caused by uninitialized value being returned. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11pinctrl: uniphier: refactor drive strength get/set functionsMasahiro Yamada
There is code duplication between uniphier_conf_pin_drive_get() and uniphier_conf_pin_drive_set(). Factor out the common code into uniphier_conf_get_drvctrl_data(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11pinctrl: imx7ulp: constify struct imx_cfg_params_decodeStefan Agner
The decode parameters are constant mark them const. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11pinctrl: imx: constify struct imx_pinctrl_soc_infoStefan Agner
Now that imx_pinctrl_probe accepts const struct imx_pinctrl_soc_info we can constify all declarations of struct imx_pinctrl_soc_info. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11pinctrl: imx7d: simplify imx7d_pinctrl_probeStefan Agner
Using of_device_get_match_data in imx7d_pinctrl_probe simplifies the function. Also get rid of the void pointer cast since imx_pinctrl_probe now accepts const struct imx_pinctrl_soc_info. Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-11pinctrl: imx: use struct imx_pinctrl_soc_info as a constStefan Agner
For some SoCs the struct imx_pinctrl_soc_info is passed through of_device_id.data which is const. Most variables are already const or otherwise not written. However, some fields are modified at runtime. Move those fields to the dynamically allocated struct imx_pinctrl. Fixes: b3060044e495 ("pinctrl: freescale: imx7d: make of_device_ids const") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly.hao_zhang
Pin function can not be match correctly when SUNXI_PIN describe with mutiple variant and same function. such as: on pinctrl-sun4i-a10.c SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION_VARIANT(0x2, "pwm", /* PWM0 */ PINCTRL_SUN4I_A10 | PINCTRL_SUN7I_A20), SUNXI_FUNCTION_VARIANT(0x3, "pwm", /* PWM0 */ PINCTRL_SUN8I_R40)), it would always match to the first variant function (PINCTRL_SUN4I_A10, PINCTRL_SUN7I_A20) so we should add variant compare on it. Signed-off-by: hao_zhang <hao5781286@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: qcom: Add msm8998 pinctrl driverKhan, Imran
Add initial pinctrl driver to support pin configuration with pinctrl framework for msm8998. Signed-off-by: Imran Khan <kimran@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> [bjorn: Consolidated function groups] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: mcp23s08: Combine two function calls into one in mcp23s08_dbg_show()Markus Elfring
* Print a line break together with other data in a single function call. * Adjust indentation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: imx6ul: add IOMUXC SNVS pinctrl driver for i.MX 6ULLBai Ping
On i.MX 6ULL, the BOOT_MODEx and TAMPERx pin MUX and CTRL registers are available in a separate IOMUXC_SNVS module. Add support for the IOMUXC_SNVS module to the i.MX 6UL pinctrl driver. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: Add Microsemi Ocelot SoC driverAlexandre Belloni
The Microsemi Ocelot SoC has a few pins that can be used as GPIOs or take multiple other functions. Add a driver for the pinmuxing and the GPIOs. There is currently no support for interrupts. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: remove redundant mux_setting clear in pinmux_disable_setting()Masahiro Yamada
desc->mux_setting is set to NULL in pin_free() called just below. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08Merge tag 'sh-pfc-for-v4.16-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.16 (take two) - Add PWM pin groups on various R-Car Gen2 and RZ/G1 SoCs, - Add missing I2C5 pin groups on R-Car E2 and RZ/G1E, - Add SATA pin groups on R-Car H3 ES2.0.
2018-01-08pinctrl: armada-37xx: account for const type of of_device_id.dataJulia Lawall
The data field of an of_device_id structure has type const void *, so there is no need for a const-discarding cast when putting const values into such a structure. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08pinctrl: axp209: account for const type of of_device_id.dataJulia Lawall
The return value of of_device_get_match_data has type const void *. The desc field of the pctl structure also has a const type, so there is no need for the const-discarding cast between them. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08pinctrl: at91-pio4: account for const type of of_device_id.dataJulia Lawall
This driver creates a const structure that it stores in the data field of an of_device_id array. Adding const to the declaration of the location that receives the const value from the data field ensures that the compiler will continue to check that the value is not modified. Furthermore, the const-discarding cast on the extraction from the data field is no longer needed. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08pinctrl: baytrail: Enable glitch filter for GPIOs used as interruptsHans de Goede
On some systems, some PCB traces attached to GpioInts are routed in such a way that they pick up enough interference to constantly (many times per second) trigger. Enabling glitch-filtering fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08pinctrl: vt8500: Delete an error message for a failed memory allocation in ↵Markus Elfring
five functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: tegra: Delete two error messages for a failed memory allocation in ↵Markus Elfring
tegra_pinctrl_probe() Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: spear: Delete an error message for a failed memory allocation in ↵Markus Elfring
spear_pinctrl_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl/spear/plgpio: Delete two error messages for a failed memory ↵Markus Elfring
allocation in plgpio_probe() Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: samsung: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL license statements with SPDX GPL-2.0+ license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: xway: Delete two error messages for a failed memory allocation in ↵Markus Elfring
pinmux_xway_probe() Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: utils: Delete an error message for a failed memory allocation in ↵Markus Elfring
pinctrl_utils_add_map_configs() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: tz1090-pdc: Delete an error message for a failed memory allocation ↵Markus Elfring
in two functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: tz1090: Delete an error message for a failed memory allocation in ↵Markus Elfring
two functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: single: Delete an unnecessary return statement in ↵Markus Elfring
pcs_irq_chain_handler() The script "checkpatch.pl" pointed information out like the following. WARNING: void function return statements are not generally useful Thus remove such a statement in the affected function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: single: Delete an error message for a failed memory allocation in ↵Markus Elfring
pcs_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: rockchip: Fix a typo in four comment linesMarkus Elfring
Adjust words in these descriptions. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: rockchip: Improve a size determination in rockchip_pinctrl_probe()Markus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: rockchip: Delete error messages for a failed memory allocation in ↵Markus Elfring
two functions Omit extra messages for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: palmas: Delete an error message for a failed memory allocation in ↵Markus Elfring
palmas_pinctrl_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: at91: Delete an error message for a failed memory allocation in ↵Markus Elfring
at91_pinctrl_mux_mask() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-28pinctrl: sunxi: fix a typo when merging A20 support to A10 driverIcenowy Zheng
When merging A20 pinctrl support to A10 pinctrl driver, the I2C function of PI3 is wrongly written as "i2c3" (it should be "i2c4"). Fix this typo. Fixes: cad4e209c102 ("pinctrl: sunxi: add support of R40 to A10 pinctrl driver") Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-28pinctrl: msm: Delete an error message for a failed memory allocation in ↵Markus Elfring
msm_pinctrl_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21pinctrl: adi2: Improve a size determination in two functionsMarkus Elfring
Replace the specification of data structures by variable references as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21pinctrl: adi2: Delete an error message for a failed memory allocation in two ↵Markus Elfring
functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21pinctrl/nomadik/abx500: Improve a size determination in abx500_gpio_probe()Markus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21pinctrl/nomadik/abx500: Delete an error message for a failed memory ↵Markus Elfring
allocation in abx500_gpio_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21pinctrl: sh-pfc: r8a7795: Add SATA pins, groups, and functionsWolfram Sang
Tested with a Salvator-XS and H3 ES2.0. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-12-20pinctrl: mvebu: Delete an error message for a failed memory allocation in ↵Markus Elfring
mvebu_pinctrl_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: single: Remove invalid messageTony Lindgren
Pinctrl single should just show how many pins were found, the physical address is already in the dev information. So let's remove the wrong information that claims to show the physical address but really prints a virtual address that is now hashed. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20Merge tag 'sh-pfc-for-v4.16-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.16 - Add CAN pin groups on RZ/G1E, - Add CAN and CAN FD pin groups on R-Car H3 ES2.0, and R-Car D3, - Add support for the new R-Car V3M SoC, - Add support for I2C on R-Car D3, - Small fixes and cleanups.
2017-12-20pinctrl: axp209: add missing Kconfig dependenciesQuentin Schulz
This fixes some compilation issues. GENERIC_PINCONF and OF at least for pinconf_generic_dt_*, PINMUX at least for pinmux_ops and GPIOLIB for at least gpio_chip. Fixes: 23f75d7dfa92 ("pinctrl: axp209: add pinctrl features") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: axp209: dereference pointer after it's been setQuentin Schulz
The number of GPIOs is gotten from a field within the structure referenced in the of_device.data but it was actually read before it was retrieved, thus it was dereferencing a null pointer. Set the number of GPIOs after retrieving of_device.data. Fixes: e1190083b89b ("pinctrl: axp209: add support for AXP813 GPIOs") Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reported-by: Mylène Josserand <mylene.josserand@free-electrons.com> Tested-by: Mylène Josserand <mylene.josserand@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: rockchip: enable clock when reading pin direction registerBrian Norris
We generally leave the GPIO clock disabled, unless an interrupt is requested or we're accessing IO registers. We forgot to do this for the ->get_direction() callback, which means we can sometimes [1] get incorrect results [2] from, e.g., /sys/kernel/debug/gpio. Enable the clock, so we get the right results! [1] Sometimes, because many systems have 1 or mor interrupt requested on each GPIO bank, so they always leave their clock on. [2] Incorrect, meaning the register returns 0, and so we interpret that as "input". Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: mediatek: update MAINTAINERS entry with MediaTek pinctrl driverSean Wang
I work for MediaTek on maintaining the existing MediaTek SoC whose target to home gateway such as MT7622 and MT7623 that is reusing MT2701 related files and will keep adding support for the following such kinds of SoCs in the future. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: mediatek: add pinctrl driver for MT7622 SoCSean Wang
Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-06-03 22:23:58 +0000