| Age | Commit message (Collapse) | Author |
|---|
|
Currently, WATCHDOG_THRESHOLD is set to detect a 62.5-millisecond skew in
a 500-millisecond WATCHDOG_INTERVAL. This requires that clocks be skewed
by more than 12.5% in order to be marked unstable. Except that a clock
that is skewed by that much is probably destroying unsuspecting software
right and left. And given that there are now checks for false-positive
skews due to delays between reading the two clocks, it should be possible
to greatly decrease WATCHDOG_THRESHOLD, at least for fine-grained clocks
such as TSC.
Therefore, add a new uncertainty_margin field to the clocksource structure
that contains the maximum uncertainty in nanoseconds for the corresponding
clock. This field may be initialized manually, as it is for
clocksource_tsc_early and clocksource_jiffies, which is copied to
refined_jiffies. If the field is not initialized manually, it will be
computed at clock-registry time as the period of the clock in question
based on the scale and freq parameters to __clocksource_update_freq_scale()
function. If either of those two parameters are zero, the
tens-of-milliseconds WATCHDOG_THRESHOLD is used as a cowardly alternative
to dividing by zero. No matter how the uncertainty_margin field is
calculated, it is bounded below by twice WATCHDOG_MAX_SKEW, that is, by 100
microseconds.
Note that manually initialized uncertainty_margin fields are not adjusted,
but there is a WARN_ON_ONCE() that triggers if any such field is less than
twice WATCHDOG_MAX_SKEW. This WARN_ON_ONCE() is intended to discourage
production use of the one-nanosecond uncertainty_margin values that are
used to test the clock-skew code itself.
The actual clock-skew check uses the sum of the uncertainty_margin fields
of the two clocksource structures being compared. Integer overflow is
avoided because the largest computed value of the uncertainty_margin
fields is one billion (10^9), and double that value fits into an
unsigned int. However, if someone manually specifies (say) UINT_MAX,
they will get what they deserve.
Note that the refined_jiffies uncertainty_margin field is initialized to
TICK_NSEC, which means that skew checks involving this clocksource will
be sufficently forgiving. In a similar vein, the clocksource_tsc_early
uncertainty_margin field is initialized to 32*NSEC_PER_MSEC, which
replicates the current behavior and allows custom setting if needed
in order to address the rare skews detected for this clocksource in
current mainline.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-4-paulmck@kernel.org
|
|
Currently, if skew is detected on a clock marked CLOCK_SOURCE_VERIFY_PERCPU,
that clock is checked on all CPUs. This is thorough, but might not be
what you want on a system with a few tens of CPUs, let alone a few hundred
of them.
Therefore, by default check only up to eight randomly chosen CPUs. Also
provide a new clocksource.verify_n_cpus kernel boot parameter. A value of
-1 says to check all of the CPUs, and a non-negative value says to randomly
select that number of CPUs, without concern about selecting the same CPU
multiple times. However, make use of a cpumask so that a given CPU will be
checked at most once.
Suggested-by: Thomas Gleixner <tglx@linutronix.de> # For verify_n_cpus=1.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-3-paulmck@kernel.org
|
|
Some sorts of per-CPU clock sources have a history of going out of
synchronization with each other. However, this problem has purportedy been
solved in the past ten years. Except that it is all too possible that the
problem has instead simply been made less likely, which might mean that
some of the occasional "Marking clocksource 'tsc' as unstable" messages
might be due to desynchronization. How would anyone know?
Therefore apply CPU-to-CPU synchronization checking to newly unstable
clocksource that are marked with the new CLOCK_SOURCE_VERIFY_PERCPU flag.
Lists of desynchronized CPUs are printed, with the caveat that if it
is the reporting CPU that is itself desynchronized, it will appear that
all the other clocks are wrong. Just like in real life.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-2-paulmck@kernel.org
|
|
When the clocksource watchdog marks a clock as unstable, this might be due
to that clock being unstable or it might be due to delays that happen to
occur between the reads of the two clocks. Yes, interrupts are disabled
across those two reads, but there are no shortage of things that can delay
interrupts-disabled regions of code ranging from SMI handlers to vCPU
preemption. It would be good to have some indication as to why the clock
was marked unstable.
Therefore, re-read the watchdog clock on either side of the read from the
clock under test. If the watchdog clock shows an excessive time delta
between its pair of reads, the reads are retried.
The maximum number of retries is specified by a new kernel boot parameter
clocksource.max_cswd_read_retries, which defaults to three, that is, up to
four reads, one initial and up to three retries. If more than one retry
was required, a message is printed on the console (the occasional single
retry is expected behavior, especially in guest OSes). If the maximum
number of retries is exceeded, the clock under test will be marked
unstable. However, the probability of this happening due to various sorts
of delays is quite small. In addition, the reason (clock-read delays) for
the unstable marking will be apparent.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-1-paulmck@kernel.org
|
|
Add the missing documentation for the @cpu parameter of
tick_cleanup_dead_cpu().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210608024305.2750999-1-libaokun1@huawei.com
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/source updates from Daniel Lezcano:
- Remove arch_timer_rate1 variable as it is unused in the architected
ARM timer (Jisheng Zhang)
- Minor cleanups (whitespace, constification, ...) for the Samsung pwm
timer (Krzysztof Kozlowski)
- Acknowledge and disable the timer interrupt at suspend time to
prevent the suspend to be aborted by the ATF if there is a pending
one on the Mediatek timer (Evan Benn)
- Save and restore the configuration register at suspend/resume time
for TI dm timer (Tony Lindgren)
- Set the scene for the next timers support by renaming the array
variables on the Ingenic time (Zhou Yanjie)
- Add the clock rate change notification to adjust the prescalar value
and compensate the clock source on the ARM global timer (Andrea
Merello)
- Add missing variable static annotation on the ARM global timer (Zou
Wei)
- Remove a duplicate argument when building the bits field on the ARM
global timer (Wan Jiabing)
- Improve the timer workaround function by reducing the loop on the
Allwinner A64 timer (Samuel Holland)
- Do no restore the register context in case of error on the TI dm
timer (Tony Lindgren)
Link: https://lore.kernel.org/r/65ed5f60-d7a5-b4ae-ff78-0382d4671cc5@linaro.org
|
|
The device is not losing context on CPU_CLUSTER_PM_ERROR. As we are only
saving and restoring context with cpu_pm, there is no need to restore the
context in case of an error.
Note that the unnecessary restoring of context does not cause issues, it's
just not needed.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210518075306.35532-1-tony@atomide.com
|
|
Bad counter reads are experienced sometimes when bit 10 or greater rolls
over. Originally, testing showed that at least 10 lower bits would be
set to the same value during these bad reads. However, some users still
reported time skips.
Wider testing revealed that on some chips, occasionally only the lowest
9 bits would read as the anomalous value. During these reads (which
still happen only when bit 10), bit 9 would read as the correct value.
Reduce the mask by one bit to cover these cases as well.
Cc: stable@vger.kernel.org
Fixes: c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org
|
|
arm_global_timer
Fix the following coccicheck warning:
drivers/clocksource/arm_global_timer.c:107:4-23:
duplicated argument to & or |
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210615115440.8881-1-wanjiabing@vivo.com
|
|
The sparse tool complains as follows:
drivers/clocksource/arm_global_timer.c:54:23: warning:
symbol 'gt_clk_rate_change_nb' was not declared. Should it be static?
This symbol is not used outside of arm_global_timer.c, so mark it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1623490046-37972-1-git-send-email-zou_wei@huawei.com
|
|
Now ARM global timer driver could work even if it's source clock rate
changes, so we don't need to disable that driver when cpu frequency scaling
is in use.
This cause Zynq arch to get support for timer delay and get_cycles().
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406130045.15491-3-andrea.merello@gmail.com
|
|
source clock changes
This patch adds rate change notification support for the parent clock;
should that clock change, then we try to adjust the our prescaler in order
to compensate (i.e. we adjust to still get the same timer frequency).
This is loosely based on what it's done in timer-cadence-ttc. timer-sun51,
mips-gic-timer and smp_twd.c also seem to look at their parent clock rate
and to perform some kind of adjustment whenever needed.
In this particular case we have only one single counter and prescaler for
all clocksource, clockevent and timer_delay, and we just update it for all
(i.e. we don't let it go and call clockevents_update_freq() to notify to
the kernel that our rate has changed).
Note that, there is apparently no other way to fixup things, because once
we call register_current_timer_delay(), specifying the timer rate, it seems
that that rate is not supposed to change ever.
In order for this mechanism to work, we have to make assumptions about how
much the initial clock is supposed to eventually decrease from the initial
one, and set our initial prescaler to a value that we can eventually
decrease enough to compensate. We provide an option in KConfig for this.
In case we end up in a situation in which we are not able to compensate the
parent clock change, we fail returning NOTIFY_BAD.
This fixes a real-world problem with Zynq arch not being able to use this
driver and CPU_FREQ at the same time (because ARM global timer is fed by
the CPU clock, which may keep changing when CPU_FREQ is enabled).
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
|
|
1.Rename the "ingenic_ost_clk_info[]" to "x1000_ost_clk_info[]" to
facilitate the addition of OST support for X2000 SoC in a later
commit
2.When the OST support for X2000 SoC is added, there will be two
compatible strings, so renaming "ingenic_ost_of_match[]" to
"ingenic_ost_of_matches[]" is more reasonable
3.Remove the unnecessary comma in "ingenic_ost_of_matches[]" to reduce
code size as much as possible.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1622824306-30987-2-git-send-email-zhouyanjie@wanyeetech.com
|
|
As we are using cpu_pm to save and restore context, we must also save and
restore the timer sysconfig register TIOCP_CFG. This is needed because
we are not calling PM runtime functions at all with cpu_pm.
Fixes: b34677b0999a ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com
|
|
Interrupts are disabled during suspend before this driver disables its
timers. ARM trusted firmware will abort suspend if the timer irq is
pending, so ack and disable the timer interrupt during suspend.
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210512122528.v4.1.I1d9917047de06715da16e1620759f703fcfdcbcb@changeid
|
|
The 'source_reg' IO memory is only read, so the pointer can point to
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506202729.157260-4-krzysztof.kozlowski@canonical.com
|
|
Failure of timer initialization is likely to be fatal for the system, so
cleanup in such case is not strictly necessary. However the code might
be refactored or reused, so better not to rely on such assumption that
system won't continue init failure.
Unmap the IO memory and put the clock on initialization failures from
devicetree.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506202729.157260-3-krzysztof.kozlowski@canonical.com
|
|
The 'struct samsung_pwm_variant' argument passed to initialization
functions is not modified, so it can be made const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506202729.157260-2-krzysztof.kozlowski@canonical.com
|
|
Cleanup the code to be slightly more readable and follow coding
convention - only whitespace. This fixes checkpatch warnings:
WARNING: Block comments should align the * on each line
WARNING: please, no space before tabs
WARNING: Missing a blank line after declarations
CHECK: Alignment should match open parenthesis
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506202729.157260-1-krzysztof.kozlowski@canonical.com
|
|
This variable is added by my mistake, it's not used at all.
Fixes: e2bf384d4329 ("clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210511154856.6afbcb65@xhacker.debian
|
|
With the introduction of per-cpu wakeup devices that can be used in
preference to the broadcast timer, print the name of such devices when
they are available.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210524221818.15850-6-will@kernel.org
|
|
When configuring the broadcast timer on entry to and exit from deep idle
states, prefer a per-CPU wakeup timer if one exists.
On entry to idle, stop the tick device and transfer the next event into
the oneshot wakeup device, which will serve as the wakeup from idle. To
avoid the overhead of additional hardware accesses on exit from idle,
leave the timer armed and treat the inevitable interrupt as a (possibly
spurious) tick event.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210524221818.15850-5-will@kernel.org
|
|
Some SoCs have two per-cpu timer implementations where the timer with the
higher rating stops in deep idle (i.e. suffers from CLOCK_EVT_FEAT_C3STOP)
but is otherwise preferable to the timer with the lower rating. In such a
design, selecting the higher rated devices relies on a global broadcast
timer and IPIs to wake up from deep idle states.
To avoid the reliance on a global broadcast timer and also to reduce the
overhead associated with the IPI wakeups, extend
tick_install_broadcast_device() to manage per-cpu wakeup timers separately
from the broadcast device.
For now, these timers remain unused.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210524221818.15850-4-will@kernel.org
|
|
In preparation for adding support for per-cpu wakeup timers, split
_tick_broadcast_oneshot_control() into a helper function which deals
only with the broadcast timer management across idle transitions.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210524221818.15850-3-will@kernel.org
|
|
tick-broadcast.o is only built if CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
so remove the redundant #ifdef guards around the definition of
tick_receive_broadcast().
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210524221818.15850-2-will@kernel.org
|
|
Use the DEVICE_ATTR_[RO|WO] helpers instead of plain DEVICE_ATTR, which
makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210523065825.19684-1-yuehaibing@huawei.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a hard-to-hit race condition in the addfd user_notif
feature of seccomp, visible since v5.9.
And a small documentation fix"
* tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Refactor notification handler to prepare for new semantics
Documentation: seccomp: Fix user notification documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of RISC-V related fixes:
- avoid errors when the stack tracing code is tracing itself.
- resurrect the memtest= kernel command line argument on RISC-V,
which was briefly enabled during the merge window before a
refactoring disabled it.
- build fix and some warning cleanups"
* tag 'riscv-for-linus-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Fix W=1 build warnings
riscv: kprobes: Fix build error when MMU=n
riscv: Select ARCH_USE_MEMTEST
riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled
|
|
Pull xfs fixes from Darrick Wong:
"This week's pile mitigates some decades-old problems in how extent
size hints interact with realtime volumes, fixes some failures in
online shrink, and fixes a problem where directory and symlink
shrinking on extremely fragmented filesystems could fail.
The most user-notable change here is to point users at our (new) IRC
channel on OFTC. Freedom isn't free, it costs folks like you and me;
and if you don't kowtow, they'll expel everyone and take over your
channel. (Ok, ok, that didn't fit the song lyrics...)
Summary:
- Fix a bug where unmapping operations end earlier than expected,
which can cause chaos on multi-block directory and symlink shrink
operations.
- Fix an erroneous assert that can trigger if we try to transition a
bmap structure from btree format to extents format with zero
extents. This was exposed by xfs/538"
* tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: bunmapi has unnecessary AG lock ordering issues
xfs: btree format inode forks can have zero extents
xfs: add new IRC channel to MAINTAINERS
xfs: validate extsz hints against rt extent size when rtinherit is set
xfs: standardize extent size hint validation
xfs: check free AG space when making per-AG reservations
|
|
This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.
Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].
[1]: https://lore.kernel.org/lkml/20210413160151.3301-1-rodrigo@kinvolk.io/
Fixes: 7cf97b125455 ("seccomp: Introduce addfd ioctl to seccomp user notifier")
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Rodrigo Campos <rodrigo@kinvolk.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-3-sargun@sargun.me
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix uninitialized error code value for the SPMI adc driver (Yang
Yingliang)
- Fix kernel doc warning (Yang Li)
- Fix wrong read-write thermal trip point initialization (Srinivas
Pandruvada)
* tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()
thermal/ti-soc-thermal: Fix kernel-doc
thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some tiny char/misc driver fixes for 5.13-rc4.
Nothing huge here, just some tiny fixes for reported issues:
- two interconnect driver fixes
- kgdb build warning fix for gcc-11
- hgafb regression fix
- soundwire driver fix
- mei driver fix
All have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: request autosuspend after sending rx flow control
kgdb: fix gcc-11 warnings harder
video: hgafb: correctly handle card detect failure during probe
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- two device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: Reduce device link removal code duplication
drivers: base: Fix device link removal
debugfs: fix security_locked_down() call for SELinux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
for 5.13-rc4.
Nothing major here, tiny changes for reported problems, full details
are in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: ad7793: Add missing error code in ad7793_setup()
iio: adc: ad7923: Fix undersized rx buffer.
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
iio: dac: ad5770r: Put fwnode in error case during ->probe()
iio: gyro: fxas21002c: balance runtime power in error path
staging: emxx_udc: fix loop in _nbu2ss_nuke()
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7192: handle regulator voltage error first
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
xhci: fix giving back URB with incorrect status regression in 5.12
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
usb: typec: tcpm: Respond Not_Supported if no snk_vdo
usb: typec: tcpm: Properly interrupt VDM AMS
USB: trancevibrator: fix control-request direction
usb: Restore the usb_header label
usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear pending after acking connector change
usb: typec: mux: Fix matching with typec_altmode_desc
misc/uss720: fix memory leak in uss720_probe
usb: dwc3: gadget: Properly track pending and queued SG
USB: usbfs: Don't WARN about excessively large memory allocations
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
usb: chipidea: udc: assign interrupt number to USB gadget structure
usb: cdnsp: Fix lack of removing request from pending list.
usb: cdns3: Fix runtime PM imbalance on error
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
...
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"
* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
|
|
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: vmw_pvscsi: Set correct residual data length
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: aic7xxx: Remove multiple definition of globals
scsi: aic7xxx: Restore several defines for aic7xxx firmware build
scsi: target: iblock: Fix smp_processor_id() BUG messages
scsi: libsas: Use _safe() loop in sas_resume_port()
scsi: target: tcmu: Fix xarray RCU warning
scsi: target: core: Avoid smp_processor_id() in preemptible code
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou
Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)
- MD pull request (Song):
- Fix incorrect chunk boundary assert (Christoph)
- Fix s390/dasd verification panic (Stefan)
* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
md/raid5: remove an incorrect assert in in_chunk_boundary
s390/dasd: add missing discipline function
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
|
|
Pull io_uring fixes from Jens Axboe:
"A few minor fixes:
- Fix an issue with hashed wait removal on exit (Zqiang, Pavel)
- Fix a recent data race introduced in this series (Marco)"
* tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
io_uring: fix data race to avoid potential NULL-deref
io-wq: Fix UAF when wakeup wqe in hash waitqueue
io_uring/io-wq: close io-wq full-stop gap
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet this week, couple of amdgpu, one i915, and a few misc otherwise.
ttm:
- prevent irrelevant swapout
amdgpu:
- MultiGPU fan fix
- VCN powergating fixes
amdkfd:
- Fix SDMA register offset error
meson:
- fix shutdown crash
i915:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4"
* tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: Skip swapout if ttm object is not populated
drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4
drm/meson: fix shutdown crash when component not probed
drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
drm/amd/pm: correct MGpuFanBoost setting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix error checking of BPF prog attachment in 'perf stat'.
- Fix getting maximum number of fds in the vendor events JSON parser.
- Move debug initialization earlier, fixing a segfault in some cases.
- Fix eventcode of power10 JSON events.
* tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events powerpc: Fix eventcode of power10 JSON events
perf stat: Fix error check for bpf_program__attach
perf debug: Move debug initialization earlier
perf jevents: Fix getting maximum number of fds
|
|
Pull cifs fixes from Steve French:
"Three SMB3 fixes.
Two for stable, and the other fixes a problem pointed out with a
recently added ioctl"
* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
cifs: fix string declarations and assignments in tracepoints
cifs: set server->cipher_type to AES-128-CCM for SMB3.0
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
- Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
- Fix Oops in xs_tcp_send_request() when transport is disconnected
- Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Bugfixes:
- Fix instances where signal_pending() should be fatal_signal_pending()
- fix an incorrect limit in filelayout_decode_layout()
- Fixes for the SUNRPC backlogged RPC queue
- Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
- Revert commit 586a0787ce35 ("Clean up rpcrdma_prepare_readch()")"
* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Remove trailing semicolon in macros
xprtrdma: Revert 586a0787ce35
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
NFS: Clean up reset of the mirror accounting variables
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
SUNRPC: More fixes for backlog congestion
SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
SUNRPC in case of backlog, hand free slots directly to waiting task
pNFS/NFSv4: Remove redundant initialization of 'rd_size'
NFS: fix an incorrect limit in filelayout_decode_layout()
fs/nfs: Use fatal_signal_pending instead of signal_pending
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions, most
of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio"
* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
ALSA: usb-audio: scarlett2: Improve driver startup messages
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
ALSA: usb-audio: fix control-request direction
ASoC: qcom: lpass-cpu: Use optional clk APIs
ASoC: cs35l33: fix an error code in probe()
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
ASoC: cs42l52: Minor tidy up of error paths
ASoC: cs35l32: Add missing regmap use_single config
ASoC: cs35l34: Add missing regmap use_single config
ASoC: cs42l73: Add missing regmap use_single config
ASoC: cs53l30: Add missing regmap use_single config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang feature fixes from Kees Cook:
- Correctly pass stack frame size checking under LTO (Nick Desaulniers)
- Avoid CFI mismatches by checking initcall_t types (Marco Elver)
* tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: LTO: have linker check -Wframe-larger-than
init: verify that function is initcall_t at compile-time
|
