| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-14
This series contains updates to ice driver only.
Karol corrects division that was causing incorrect calculations and
adds a check to ensure stale timestamps are not being used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix up unprivileged test case results for 'Dest pointer in r0' verifier tests
given they now need to reject R0 containing a pointer value, and add a couple
of new related ones with 32bit cmpxchg as well.
root@foo:~/bpf/tools/testing/selftests/bpf# ./test_verifier
#0/u invalid and of negative number OK
#0/p invalid and of negative number OK
[...]
#1268/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK
#1269/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK
#1270/p XDP pkt read, pkt_data <= pkt_meta', good access OK
#1271/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
#1272/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
Summary: 1900 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The implementation of BPF_CMPXCHG on a high level has the following parameters:
.-[old-val] .-[new-val]
BPF_R0 = cmpxchg{32,64}(DST_REG + insn->off, BPF_R0, SRC_REG)
`-[mem-loc] `-[old-val]
Given a BPF insn can only have two registers (dst, src), the R0 is fixed and
used as an auxilliary register for input (old value) as well as output (returning
old value from memory location). While the verifier performs a number of safety
checks, it misses to reject unprivileged programs where R0 contains a pointer as
old value.
Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer
with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the
guessed address into the map slot as a scalar, and using the map value pointer as
R0 while SRC_REG has a canary value to detect a matching address.
Fix it by checking R0 for pointers, and reject if that's the case for unprivileged
programs.
Fixes: 5ffa25502b5a ("bpf: Add instructions for atomic_[cmp]xchg")
Reported-by: Ryota Shiga (Flatt Security)
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test whether unprivileged would be able to leak the spilled pointer either
by exporting the returned value from the atomic{32,64} operation or by reading
and exporting the value from the stack after the atomic operation took place.
Note that for unprivileged, the below atomic cmpxchg test case named "Dest
pointer in r0 - succeed" is failing. The reason is that in the dst memory
location (r10 -8) there is the spilled register r10:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (bf) r0 = r10
1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (7b) *(u64 *)(r10 -8) = r0
2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp
2: (b7) r1 = 0
3: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=fp
3: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r1)
4: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm
4: (79) r1 = *(u64 *)(r0 -8)
5: R0_w=fp0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm
5: (b7) r0 = 0
6: R0_w=invP0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm
6: (95) exit
However, allowing this case for unprivileged is a bit useless given an
update with a new pointer will fail anyway:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (bf) r0 = r10
1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (7b) *(u64 *)(r10 -8) = r0
2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp
2: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r10)
R10 leaks addr into mem
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The change in commit 37086bfdc737 ("bpf: Propagate stack bounds to registers
in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since
this would allow for unprivileged users to leak kernel pointers. For example,
an atomic fetch/and with -1 on a stack destination which holds a spilled
pointer will migrate the spilled register type into a scalar, which can then
be exported out of the program (since scalar != pointer) by dumping it into
a map value.
The original implementation of XADD was preventing this situation by using
a double call to check_mem_access() one with BPF_READ and a subsequent one
with BPF_WRITE, in both cases passing -1 as a placeholder value instead of
register as per XADD semantics since it didn't contain a value fetch. The
BPF_READ also included a check in check_stack_read_fixed_off() which rejects
the program if the stack slot is of __is_pointer_value() if dst_regno < 0.
The latter is to distinguish whether we're dealing with a regular stack spill/
fill or some arithmetical operation which is disallowed on non-scalars, see
also 6e7e63cbb023 ("bpf: Forbid XADD on spilled pointers for unprivileged
users") for more context on check_mem_access() and its handling of placeholder
value -1.
One minimally intrusive option to fix the leak is for the BPF_FETCH case to
initially check the BPF_READ case via check_mem_access() with -1 as register,
followed by the actual load case with non-negative load_reg to propagate
stack bounds to registers.
Fixes: 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH")
Reported-by: <n4ke4mry@gmail.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Mat Martineau says:
====================
mptcp: Fixes for ULP, a deadlock, and netlink docs
Two of the MPTCP fixes in this set are related to the TCP_ULP socket
option with MPTCP sockets operating in "fallback" mode (the connection
has reverted to regular TCP). The other issues are an observed deadlock
and missing parameter documentation in the MPTCP netlink API.
Patch 1 marks TCP_ULP as unsupported earlier in MPTCP setsockopt code,
so the fallback code path in the MPTCP layer does not pass the TCP_ULP
option down to the subflow TCP socket.
Patch 2 makes sure a TCP fallback socket returned to userspace by
accept()ing on a MPTCP listening socket does not allow use of the
"mptcp" TCP_ULP type. That ULP is intended only for use by in-kernel
MPTCP subflows.
Patch 3 fixes the possible deadlock when sending data and there are
socket option changes to sync to the subflows.
Patch 4 makes sure all MPTCP netlink event parameters are documented
in the MPTCP uapi header.
====================
Link: https://lore.kernel.org/r/20211214231604.211016-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'loc_id' and 'rem_id' are set in all events linked to subflows but those
were missing in the events description in the comments.
Fixes: b911c97c7dc7 ("mptcp: add netlink event support")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__mptcp_push_pending() may call mptcp_flush_join_list() with subflow
socket lock held. If such call hits mptcp_sockopt_sync_all() then
subsequently __mptcp_sockopt_sync() could try to lock the subflow
socket for itself, causing a deadlock.
sysrq: Show Blocked State
task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x2d6/0x10c0
? __mod_memcg_state+0x4d/0x70
? csum_partial+0xd/0x20
? _raw_spin_lock_irqsave+0x26/0x50
schedule+0x4e/0xc0
__lock_sock+0x69/0x90
? do_wait_intr_irq+0xa0/0xa0
__lock_sock_fast+0x35/0x50
mptcp_sockopt_sync_all+0x38/0xc0
__mptcp_push_pending+0x105/0x200
mptcp_sendmsg+0x466/0x490
sock_sendmsg+0x57/0x60
__sys_sendto+0xf0/0x160
? do_wait_intr_irq+0xa0/0xa0
? fpregs_restore_userregs+0x12/0xd0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9ba546c2d0
RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0
RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234
RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060
R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8
</TASK>
Fix the issue by using __mptcp_flush_join_list() instead of plain
mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by
Florian. The sockopt sync will be deferred to the workqueue.
Fixes: 1b3e7ede1365 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/244
Suggested-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mptcp ULP extension relies on sk->sk_sock_kern being set correctly:
It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from
working for plain tcp sockets (any userspace-exposed socket).
But in case of fallback, accept() can return a plain tcp sk.
In such case, sk is still tagged as 'kernel' and setsockopt will work.
This will crash the kernel, The subflow extension has a NULL ctx->conn
mptcp socket:
BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0
Call Trace:
tcp_data_ready+0xf8/0x370
[..]
Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP_ULP setsockopt cannot be used for mptcp because its already
used internally to plumb subflow (tcp) sockets to the mptcp layer.
syzbot managed to trigger a crash for mptcp connections that are
in fallback mode:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0
RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline]
[..]
__tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline]
tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160
do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391
mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638
Remove support for TCP_ULP setsockopt.
Fixes: d9e4c1291810 ("mptcp: only admit explicitly supported sockopt")
Reported-by: syzbot+1fd9b69cde42967d1add@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver has to check if it does not accidentally put the timestamp in
the SKB before previous timestamp gets overwritten.
Timestamp values in the PHY are read only and do not get cleared except
at hardware reset or when a new timestamp value is captured.
The cached_tstamp field is used to detect the case where a new timestamp
has not yet been captured, ensuring that we avoid sending stale
timestamp data to the stack.
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Change the division in ice_ptp_adjfine from div_u64 to div64_u64.
div_u64 is used when the divisor is 32 bit but in this case incval is
64 bit and it caused incorrect calculations and incval adjustments.
Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit referenced below added fixup_map_timer support (to create a
BPF map containing timers), but failed to increase the size of the
map_fds array, leading to out of bounds write. Fix this by changing
MAX_NR_MAPS to 22.
Fixes: e60e6962c503 ("selftests/bpf: Add tests for restricted helpers")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214014800.78762-1-memxor@gmail.com
|
|
Do not sleep in poll() when the need_wakeup flag is set. When this
flag is set, the application needs to explicitly wake up the driver
with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx
and/or Tx processing will be processed promptly. But the current code
in poll(), sleeps first then wakes up the driver. This means that no
driver processing will occur (baring any interrupts) until the timeout
has expired.
Fix this by checking the need_wakeup flag first and if set, wake the
driver and return to the application. Only if need_wakeup is not set
should the process sleep if there is a timeout set in the poll() call.
Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings")
Reported-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20211214102607.7677-1-magnus.karlsson@gmail.com
|
|
Ido Schimmel says:
====================
mlxsw: MAC profiles occupancy fix
Patch #1 fixes a router interface (RIF) MAC profiles occupancy bug that
was merged in the last cycle.
Patch #2 adds a selftest that fails without the fix.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test case to cover the bug fixed by the previous patch.
Edit the MAC address of one netdev so that it matches the MAC address of
the second netdev. Verify that the two MAC profiles were consolidated by
testing that the MAC profiles occupancy decreased by one.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when setting a router interface (RIF) MAC address while the
MAC profile is not shared with other RIFs, the profile is edited so that
the new MAC address is assigned to it.
This does not take into account a situation in which the new MAC address
already matches an existing MAC profile. In that situation, two MAC
profiles will be occupied even though they hold MAC addresses from the
same profile.
In order to prevent that, add a check to ensure that editing a MAC
profile takes place only when the new MAC address does not match an
existing profile.
Fixes: 605d25cd782a6 ("mlxsw: spectrum_router: Add RIF MAC profiles support")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__rds_conn_create() did not release conn->c_path when loop_trans != 0 and
trans->t_prefer_loopback != 0 and is_outgoing == 0.
Fixes: aced3ce57cd3 ("RDS tcp loopback connection can hang")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A fairly large number of fixes this time:
* fix a station info memory leak on insert collisions
* a rate control fix for retransmissions
* two aggregation setup fixes
* reload current regdomain when reloading database
* a locking fix in regulatory work
* a probe request allocation size fix in mac80211
* apply TCP vs. aggregation (sk pacing) on mesh
* fix ordering of channel context update vs. station
state
* set up skb->dev for mesh forwarding properly
* track QoS data frames only for admission control to
avoid out-of-bounds read (found by syzbot)
* validate extended element ID vs. existing data to
avoid out-of-bounds read (found by syzbot)
* fix locking in mac80211 aggregation TX setup
* fix traffic stall after HW restart when TXQs are used
* fix ordering of reconfig/restart after HW restart
* fix interface type for extended aggregation capability
lookup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-13
This series contains updates to iavf driver only.
Dan Carpenter fixes some missing mutex unlocking.
Stefan Assmann restores stopping watchdog from overriding to reset state.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to return EOPNOTSUPP for the unsupported mpls action type when
setup the flow action.
In the original implement, we will return 0 for the unsupported mpls
action type, actually we do not setup it and the following actions
to the flow action entry.
Fixes: 9838b20a7fb2 ("net: sched: take rtnl lock in tc_setup_flow_action()")
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To replicate the issue:-
1) Add 1 flower filter for VLAN Priority based frame steering:-
$ IFDEVNAME=eth0
$ tc qdisc add dev $IFDEVNAME ingress
$ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \
flower vlan_prio 0 hw_tc 0
2) Get the 'pref' id
$ tc filter show dev $IFDEVNAME ingress
3) Delete a specific tc flower record (say pref 49151)
$ tc filter del dev $IFDEVNAME parent ffff: pref 49151
From dmesg, we will observe kernel NULL pointer ooops
[ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 197.171367] #PF: supervisor read access in kernel mode
[ 197.171367] #PF: error_code(0x0000) - not-present page
[ 197.171367] PGD 0 P4D 0
[ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip>
[ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac]
<snip>
[ 197.171367] Call Trace:
[ 197.171367] <TASK>
[ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac]
[ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac]
[ 197.171367] tc_setup_cb_destroy+0xb3/0x180
[ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
The above issue is due to previous incorrect implementation of
tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule()
to get struct flow_rule *rule which is no longer valid for tc filter
delete operation.
struct flow_rule *rule = flow_cls_offload_flow_rule(cls);
struct flow_dissector *dissector = rule->match.dissector;
So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for
earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(),
this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload
record for 'RX frame steering' tc flower, currently used for VLAN
priority. The implementation has taken consideration for future extension
to include other type RX frame steering such as EtherType based.
v2:
- Clean up overly extensive backtrace and rewrite git message to better
explain the kernel NULL pointer issue.
Fixes: 0e039f5cf86c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower")
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we reconfigure, the driver might do some things to complete
the reconfiguration. It's strange and could be broken in some
cases because we restart other works (e.g. remain-on-channel and
TX) before this happens, yet only start queues later.
Change this to do the reconfig complete when reconfiguration is
actually complete, not when we've already started doing other
things again.
For iwlwifi, this should fix a race where the reconfig can race
with TX, for ath10k and ath11k that also use this it won't make
a difference because they just start queues there, and mac80211
also stopped the queues and will restart them later as before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cab99f22fe19.Iefe494687f15fd85f77c1b989d1149c8efdfdc36@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Mark TXQs as having seen transmit while they were stopped if
we bail out of drv_wake_tx_queue() due to reconfig, so that
the queue wake after this will make them catch up. This is
particularly necessary for when TXQs are used for management
packets since those TXQs won't see a lot of traffic that'd
make them catch up later.
Cc: stable@vger.kernel.org
Fixes: 4856bfd23098 ("mac80211: do not call driver wake_tx_queue op during reconfig")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.4573a221c0e1.I0d1d5daea3089be3fc0dccc92991b0f8c5677f0c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently channel context is updated only after station got an update about
new assoc state, this results in station using the old channel context.
Fix this by moving the update channel context before updating station,
enabling the driver to immediately use the updated channel context in
the new assoc state.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.1c80c17ffd8a.I94ae31378b363c1182cfdca46c4b7e7165cff984@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of using the hard-coded value of '100' use the correct
scan IEs length as calculated during HW registration to mac80211.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.0a82d6891719.I8ded1f2e0bccb9e71222c945666bcd86537f2e35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We should be doing the HE capabilities lookup based on the full
interface type so if P2P doesn't have HE but client has it doesn't
get confused. Fix that.
Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Before attempting to parse an extended element, verify that
the extended element ID is present.
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Reported-by: syzbot+59bdff68edce82e393b6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211211201023.f30a1b128c07.I5cacc176da94ba316877c6e10fe3ceec8b4dbd7d@changeid
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function cfg80211_reg_can_beacon_relax() expects wiphy
mutex to be held when it is being called. However, when
reg_leave_invalid_chans() is called the mutex is not held.
Fix it by acquiring the lock before calling the function.
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we call ieee80211_agg_start_txq(), that will in turn call
schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb()
this is done under sta->lock, which leads to certain circular
lock dependencies, as reported by Chris Murphy:
https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com
In general, ieee80211_agg_start_txq() is usually not called
with sta->lock held, only in this one place. But it's always
called with sta->ampdu_mlme.mtx held, and that's therefore
clearly sufficient.
Change ieee80211_stop_tx_ba_cb() to also call it without the
sta->lock held, by factoring it out of ieee80211_remove_tid_tx()
(which is only called in this one place).
This breaks the locking chain and makes it less likely that
we'll have similar locking chain problems in the future.
Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This removes the previously unused reload flag, which was introduced in
1eda919126b4.
The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed
unconditionally.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 1eda919126b4 ("nl80211: reset regdom when reloading regdb")
Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/
Signed-off-by: Finn Behrens <me@kloenk.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Sending them out on a different queue can cause a race condition where a
number of packets in the queue may be discarded by the receiver, because
the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate
packet seqno in hardware on tx, regardless of whether iTXQ is used or not.
The only driver I've seen that explicitly deals with this issue internally
is mwl8k.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, when deleting an endpoint the netlink PM treverses
all the local MPTCP sockets, regardless of their status.
If an MPTCP listener socket is bound to the IP matching the
delete endpoint, the listener TCP socket will be closed.
That is unexpected, the PM should only affect data subflows.
Additionally, syzbot was able to trigger a NULL ptr dereference
due to the above:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897
Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff
RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016
RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000
R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001
FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5637 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162
finish_wait+0xc0/0x270 kernel/sched/wait.c:400
inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline]
inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497
mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865
inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739
mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345
do_accept+0x382/0x510 net/socket.c:1773
__sys_accept4_file+0x7e/0xe0 net/socket.c:1816
__sys_accept4+0xb0/0x100 net/socket.c:1846
__do_sys_accept net/socket.c:1864 [inline]
__se_sys_accept net/socket.c:1861 [inline]
__x64_sys_accept+0x71/0xb0 net/socket.c:1861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f177cd8b8e9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b
RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c
R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000
</TASK>
Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN
status.
Reported-and-tested-by: syzbot+e4d843bb96a9431e6331@syzkaller.appspotmail.com
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Fixes: 740d798e8767 ("mptcp: remove id 0 address")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ebc7594cdd420d241fb2172ddb8542ba64717657.1639238695.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Misc virtio and vdpa bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: Consider device id larger than 31
virtio/vsock: fix the transport to work with VMADDR_CID_ANY
virtio_ring: Fix querying of maximum DMA mapping size for virtio device
virtio: always enter drivers/virtio/
vduse: check that offset is within bounds in get_config()
vdpa: check that offsets are within bounds
vduse: fix memory corruption in vduse_dev_ioctl()
|
|
The driver is not ready yet to be compiled as a module since it depends
on some symbols not exported on MIPS. We have the following current
problems:
Building mips:allmodconfig ... failed
--------------
Error log:
ERROR: modpost: missing MODULE_LICENSE() in drivers/pci/controller/pcie-mt7621.o
ERROR: modpost: "mips_cm_unlock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined!
ERROR: modpost: "mips_cpc_base" [drivers/pci/controller/pcie-mt7621.ko] undefined!
ERROR: modpost: "mips_cm_lock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined!
ERROR: modpost: "mips_cm_is64" [drivers/pci/controller/pcie-mt7621.ko] undefined!
ERROR: modpost: "mips_gcr_base" [drivers/pci/controller/pcie-mt7621.ko] undefined!
Temporarily move from 'tristate' to 'bool' until a better solution is
ready.
Also RALINK is redundant because SOC_MT7621 already depends on it.
Hence, simplify condition.
Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver").
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-and-Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 054aa8d439b9 ("fget: check that the fd still exists after getting
a ref to it") fixed a race with getting a reference to a file just as it
was being closed. It was a fairly minimal patch, and I didn't think
re-checking the file pointer lookup would be a measurable overhead,
since it was all right there and cached.
But I was wrong, as pointed out by the kernel test robot.
The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed
quite noticeably. Admittedly it seems to be a very artificial test:
doing "poll()" system calls on regular files in a very tight loop in
multiple threads.
That means that basically all the time is spent just looking up file
descriptors without ever doing anything useful with them (not that doing
'poll()' on a regular file is useful to begin with). And as a result it
shows the extra "re-check fd" cost as a sore thumb.
Happily, the regression is fixable by just writing the code to loook up
the fd to be better and clearer. There's still a cost to verify the
file pointer, but now it's basically in the noise even for that
benchmark that does nothing else - and the code is more understandable
and has better comments too.
[ Side note: this patch is also a classic case of one that looks very
messy with the default greedy Myers diff - it's much more legible with
either the patience of histogram diff algorithm ]
Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/20211213083154.GA20853@linux.intel.com/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Carel Si <beibei.si@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The watchdog task incorrectly changes the state to __IAVF_RESETTING,
instead of letting the reset task take care of that. This was already
resolved by commit 22c8fd71d3a5 ("iavf: do not override the adapter
state in the watchdog task") but the problem was reintroduced by the
recent code refactoring in commit 45eebd62999d ("iavf: Refactor iavf
state machine tracking").
Fixes: 45eebd62999d ("iavf: Refactor iavf state machine tracking")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This code was re-organized and there some unlocks missing now.
Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use page_pool_alloc_pages instead of page_pool_dev_alloc_pages, which
can give the gfp parameter, in the case of not supporting 64-bit width,
using 32-bit address memory can reduce a copy from swiotlb.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently, a patch has been submitted to "fix" the refcounting for a DT
node in of_mdiobus_link_mdiodev(). This is not a leaked refcount. The
refcount is passed to the new device.
Sadly, coccicheck identifies this location as a leaked refcount, which
means we're likely to keep getting patches to "fix" this. However,
fixing this will cause breakage. Add a comment to state that the lack
of of_node_put() here is intentional.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix following coccicheck warning:
WARNING: Function "for_each_child_of_node"
should have of_node_put() before return.
Early exits from for_each_child_of_node should decrement the
node reference counter.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent GRE selftests defined NUM_NETIFS=10. If the users copy
forwarding.config.sample to forwarding.config directly, they will get
error "Command line is not complete" when run the GRE tests, because
create_netif_veth() failed with no interface name defined.
Fix it by extending the NETIFS with p9 and p10.
Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings
in mac_config") removed forcing of speed and duplex from
mv88e6xxx_mac_config(), where the link is forced down, and left it only
in mv88e6xxx_mac_link_up(), by which time link is unforced.
It seems that (at least on 88E6190) when changing cmode to 2500base-x,
if the link is not forced down, but the speed or duplex are still
forced, the forcing of new settings for speed & duplex doesn't take in
mv88e6xxx_mac_link_up().
Fix this by unforcing speed & duplex in mv88e6xxx_mac_link_down().
Fixes: 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tiny fix. Option -u ("use udp") does not take an argument.
It can cause the next argument to silently be ignored.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phy_attach() function does not return NULL. It returns error pointers.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without the bound checks for scpi_pd->name, it could result in the buffer
overflow when copying the SCPI device name from the corresponding device
tree node as the name string is set at maximum size of 30.
Let us fix it by using devm_kasprintf so that the string buffer is
allocated dynamically.
Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd")
Reported-by: Pedro Batista <pedbap.g@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20211209120456.696879-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Prevent panic with FORTIFY_SOURCE in smp bringup.
* tag 'v5.16-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up
Link: https://lore.kernel.org/r/1827929.9bfCS3lLB7@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixes for some board-level issues (regulators, mmc, poweroff, audio)
* tag 'v5.16-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix poweroff on helios64
arm64: dts: rockchip: fix audio-supply for Rock Pi 4
arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply
arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
Link: https://lore.kernel.org/r/3072346.MIvVl8DfR5@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.16, round 2:
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
regression that LCDIF driver stops probe, because interconnect
provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.
* tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
firmware: Fixes for v5.16-rc5
This contains a single fix for an incorrect usage of sizeof().
* tag 'tegra-for-5.16-firmware-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix error application of sizeof() to pointer
Link: https://lore.kernel.org/r/20211207162115.450554-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
