| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
Keystone2 device tree updates for v6.10
Generic Cleanups/Fixes:
- Remove custom ti,system-reboot-controller property
* tag 'ti-keystone-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
dt-bindings: arm: keystone: Remove ti,system-reboot-controller property
ARM: dts: ti: keystone: k2g: Remove ti,system-reboot-controller property
Link: https://lore.kernel.org/r/20240501124309.3cj5b3gjf3cpimut@outsell
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V Devicetrees for v6.10
Sophgo:
Added sdhci support for cv18xx/duo.
Added clock support for cv18xx.
Added clock for uart/sdhci.
Added spi support for cv18xx.
Added i2c support for cv18xx.
Added reserved memory node for cv1800b/duo.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux:
riscv: dts: sophgo: add reserved memory node for CV1800B
riscv: dts: sophgo: use real clock for sdhci
riscv: dts: sophgo: cv18xx: Add i2c devices
riscv: dts: sophgo: cv18xx: Add spi devices
riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC
riscv: dts: sophgo: add clock generator for Sophgo CV1800 series SoC
riscv: dts: sophgo: add sdcard support for milkv duo
Link: https://lore.kernel.org/r/MA0P287MB2822CA2DE757787D6EA3B1F8FE192@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'/memory' nodes always have a 'reg' property, and therefore should have
a unit-address with just plain hex (i.e. no commas). Fix all the arm64
'/memory' nodes.
It's possible that some bootloader depends on /memory (arm32 ATAG to DT
code does for example). If so, the memory node should be commented with
that requirement.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Chanho Min <chanho.min@lge.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240430191856.874600-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.10, please pull the following:
- Rafal moves the "brcm,wp-not-connected" property from the individual
board DTSes to the SoC' DTSI since all boards a designed the same way
* tag 'arm-soc/for-6.10/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: set brcm,wp-not-connected
Link: https://lore.kernel.org/r/20240429213703.2327834-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
* tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Describe Ethernet LEDs
ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200
ARM: dts: bcm2835: Add Unicam CSI nodes
ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node
firmware: raspberrypi: Use correct device for DMA mappings
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node
Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip ARM64 device tree updates for v6.10
It contains:
- dtbs_check and dtc W=1 warning fixes
- mdio2 and serdes address fixes for sparx5
* tag 'microchip-dt64-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: sparx5_pcb135: drop duplicated NOR flash
arm64: dts: microchip: sparx5_pcb134: drop duplicated NOR flash
arm64: dts: microchip: sparx5_pcb135: drop LED unit addresses
arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses
arm64: dts: microchip: sparx5_pcb135: align I2C mux node name with bindings
arm64: dts: microchip: sparx5_pcb134: align I2C mux node name with bindings
arm64: dts: microchip: sparx5_pcb135: add missing I2C mux unit addresses
arm64: dts: microchip: sparx5_pcb134: add missing I2C mux unit addresses
arm64: dts: microchip: sparx5: correct serdes unit address
arm64: dts: microchip: sparx5: fix mdio reg
Link: https://lore.kernel.org/r/20240429121429.1941241-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.10
1. TI: add missing white-spaces for code readability.
2. Aspeed: add vendor prefix to compatibles, to properly describe
hardware, even though Linux drivers match by device name.
* tag 'dt-cleanup-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: aspeed: Add vendor prefixes to lm25066 compat strings
ARM: dts: ti: omap: minor whitespace cleanup
Link: https://lore.kernel.org/r/20240428163316.28955-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.10
Fixes, which might have practical impact, however things were broken for
long enough to justify pushing it regular path:
1. ARM Juno: shorten node names for thermal zones, because Linux drivers
have strict limit of 20 characters.
2. HiSilicon: correct size of GIC GICC address space and add missing
GICH and GICV spaces, add cache info to properly describe cache
topology and solve kernel boot warning.
Several cleanups:
1. Use capital "OR" for multiple licenses in SPDX.
2. Correct white-spaces for code readability.
3. Fix W=1 dtc compiler warnings, which should not have practical
impact for Amazon, APM, Cavium, Realtek, Socionext Uniphier and
Spreadtrum like:
- missing unit addresses,
- nodes not belonging to soc node,
- not using generic node names,
- few incorrect unit addresses.
* tag 'dt64-cleanup-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: (28 commits)
arm64: dts: cavium: thunder2-99xx: drop redundant reg-names
arm64: dts: amazon: alpine-v3: correct gic unit addresses
arm64: dts: amazon: alpine-v3: drop cache nodes unit addresses
arm64: dts: amazon: alpine-v3: add missing io-fabric unit addresses
arm64: dts: amazon: alpine-v2: move non-MMIO node out of soc
arm64: dts: amazon: alpine-v2: add missing io-fabric unit addresses
arm64: dts: apm: shadowcat: move non-MMIO node out of soc
arm64: dts: apm: storm: move non-MMIO node out of soc
arm64: dts: cavium: correct unit addresses
arm64: dts: cavium: move non-MMIO node out of soc
arm64: dts: realtek: rtc16xx: add missing unit address to soc node
arm64: dts: realtek: rtd139x: add missing unit address to soc node
arm64: dts: realtek: rtd129x: add missing unit address to soc node
arm64: dts: uniphier: ld20-global: drop audio codec port unit address
arm64: dts: uniphier: ld20-global: use generic node name for audio-codec
arm64: dts: uniphier: ld11-global: drop audio codec port unit address
arm64: dts: uniphier: ld11-global: use generic node name for audio-codec
arm64: dts: sharkl3: add missing unit addresses
arm64: dts: whale2: add missing ap-apb unit address
arm64: dts: sc9860: move GIC to soc node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.10:
- New board support: Emcraft Systems NavQ+ Kit, Toradex Colibri iMX8DX,
and S32G-VNP-RDB3 board.
- A series from Alexander Stein that adds empty DSI output endpoint to
simplify DSI connection description at board level.
- Add pinmux and I2C GPIOs to support bus recovery for LX2160A.
- Add cm40 subsystem description for i.MX8 SoCs.
- A series from Frank Li that adds ADC, LPSPI and FlexSPI devices for
imx8qm-mek board.
- Add audio devices ASRC, ESAI, SPDIF and SAI for i.MX8QXP and correct
audio LPCG index.
- A couple of changes from Ghennadi Procopciuc that add SCMI firmware
and uSDHC nodes for S32G SoC.
- A couple of imx8mp-msc-sm2s updates from Ian Ray improving I2C pad
drive strength and adding SDA/SCL GPIOs for I2C devices.
- Add PCA9451A PMIC and PCF2131 RTC support for imx93-11x11-evk board.
- A series from Lucas Stach to enable HDMI display support for i.MX8MP.
- A series from Peng Fan to improve i.MX93 support for LPI2C, LPSPI, FEC
and eQoS.
- A couple of LS1028A changes from Rob Herring to improve PCI device
description.
- A series from Shengjiu Wang adding HDMI and PDM mic sound support for
imx8mp-evk board.
- A number of i.MX8M Venice device improvements from Stefan Eichenberger,
Tim Harvey and Vitor Soares.
- A series from Xu Yang that enables USB support for imx8ulp-evk and
imx93-11x11-evk board.
- Other small and random updates on various boards.
* tag 'imx-dt64-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (78 commits)
arm64: dts: imx93-11x11-evk: add RTC PCF2131 support
arm64: dts: imx93-11x11-evk: add reset gpios for ethernet PHYs
arm64: dts: imx93-11x11-evk: add sleep pinctrl for sdhc2
arm64: dts: imx93-11x11-evk: add different usdhc pinctrl for different timing usage
arm64: dts: imx93-11x11-evk: add sleep pinctrl for eqos and fec
arm64: dts: imx93-11x11-evk: update resource table address
arm64: dts: imx93: add nvmem property for eqos
arm64: dts: imx93: add nvmem property for fec1
arm64: dts: imx93: assign usdhc[1..3] root clock to 400MHz
arm64: dts: imx93: add dma support for lpspi[1..8]
arm64: dts: imx93: add dma support for lpi2c[1..8]
arm64: dts: imx93: use FSL_EDMA_RX for rx channel
arm64: dts: freescale: ls1028a: Add standard PCI device compatible strings to ENETC
arm64: dts: freescale: ls1028a: Fix embedded PCI interrupt mapping
arm64: dts: imx8qxp-mek: add cm40_i2c, wm8960 and sai[0,1,4,5]
arm64: dts: imx8mp: Align both CSI2 pixel clock
arm64: dts: freescale: imx8m[mp]-verdin: Update audio card name
arm64: dts: imx8mp: Enable HDMI on TQMa8MPxL/MBa8MPxL
arm64: dts: imx8ulp: add caam jr
arm64: dts: imx8mp-msc-sm2s: Add i2c{1,6} sda-/scl-gpios
...
Link: https://lore.kernel.org/r/20240428121247.10370-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.10:
- New board support: Seeed Studio NPi dev board, UNI-T UTi260B thermal
camera board.
- A couple of IRQ config correction for touchscreen and RC5T619 on
tolino-shine2hd device.
- Add snvs-poweroff support for i.MX7.
- A couple of dtb_check warning fixes on i.MX6SX and i.MX6QDL ESAI.
- Enable USB support for imx6qdl-udoo and imx27-phytec.
- A big series from Uwe Kleine-König to adopt #pwm-cells = <3> for i.MX
devices.
- Other small changes and clean-ups.
* tag 'imx-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (64 commits)
ARM: dts: imx6ul-pico: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-kontron-bl-common: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-kontron-bl-43: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-isiot: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-imx6ull-opos6uldev: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-geam: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-ccimx6ulsbcpro: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-14x14-evk: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sx-softing-vining-2000: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sx-sdb: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sx-nitrogen6sx: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sll-evk: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sl-evk: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-var-dt6customboard: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-prti6q: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-pistachio: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-novena: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-kp: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6qdl-skov-cpu: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6qdl-savageboard: Use #pwm-cells = <3> for imx27-pwm device
...
Link: https://lore.kernel.org/r/20240428121247.10370-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX DT bindings for 6.10:
- Add vendor prefix for Emcraft Systems
- Add compatible for new boards: Emcraft Systems i.MX8M Plus NavQ+ Kit,
Colibri iMX8DX, Seeed studio NPi base board, NXP S32G3 board
- Drop reduntant toradex,colibri-imx8x from fsl.yaml
- Add usbmisc compatible for i.MX8ULP
* tag 'imx-bindings-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible
dt-bindings: arm: fsl: Add Colibri iMX8DX
dt-bindings: arm: fsl: remove reduntant toradex,colibri-imx8x
dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
dt-bindings: vendor-prefixes: Add Emcraft Systems
dt-bindings: arm: fsl: add NXP S32G3 board
dt-bindings: arm: fsl: Add Seeed studio NPi based boards
Link: https://lore.kernel.org/r/20240428121247.10370-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.10
Support for Sony Xperia 1V, on the SM8550 platform, is added.
On IPQ8074, UART6 is described and unused gpios from QPIC are removed.
Backlight and touchscreen are described on Samsung Grand Prime devices.
RGB LED is added to Sony Xperia "Yoshino" devices, on which the
volume-up key definition is corrected as well.
Light Pulse Generator node is added to PM6150L PMIC, and blocks related
to USB Type-C on PM6150 are added.
On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of
remoteprocs and both USB Type-C and native DisplayPort are enabled.
For the related IDP display is enabled, and the PMIC volume and power
buttons are described.
The inline crypto engine is added for SC7280, and an additional turbo
frequency is added to the MDP.
USB Type-C port management is introduce for the QRB2210 RB1. WiFi
firmware-name qualifier is added to both RB1 and RB2 boards.
The LMH node is added for the QCM2290, to configure the thresholds as
well as provide thermal pressure input.
The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow
UHS modes.
The unused DCC is disabled on SC7180, and unused PMIC gpio block is
disabled on Trogdor.
For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with
agreed upon firmware structure. The frequency of the I2C bus for
touchpad is brought up to mitigate missing events. A number of
additional cleanups are introduced.
For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad
introduced. A PS_HOLD-based restart node is introduced and acts as a
fallback if other mechanisms are unavailable to restart the board.
QFPROM is described, missing LMH interrupts for thermal pressure are
added. The TCSR download mode register is added, to allow configuring
if download mode should be entered on a crash.
USB Type-C handling is introduce for Fairphone FP3 as well.
On SM6350 crypto engine and DisplayPort controllers are introduced.
WiFi is enabled on the SM8150 Hardware Development Kit (HDK)
USB PD properties are added on Xiaomi Mi Pad 5 Pro devices.
Interconnect paths are added for UFS on SM8350, to ensure the bus is
voted for when the controller is operating.
On SM8550 the DMA coherency properties are corrected for SMMU and a few
consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are
adjusted. Fastrpc banks are marked non-secure as needed.
The GPU description is introduced on SM8650, and enabled on the QRD. A
missing reserved-memory node is added, as is a few missing fastrpc
compute banks, and the non-secure-domain flag for other banks.
On X1 Elite SPMI support is added, together with PMIC definitons. The
link properties for DP3 are corrected, and audio-related resets are
introduced. SoundWire properties are corrected.
Nodes describing the PCIe bridge under the host controller is added
for a bunch of platforms.
The GPIO carrying orientation information for USB Type-C is added across
Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845
HDKs.
A few dtbTool-specific compatibles for msm8916 is dropped from the
bindings.
A number of DeviceTree binding validation issues are corrected.
* tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (110 commits)
dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn)
arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: ipq6018: Add PCIe bridge node
arm64: dts: qcom: ipq8074: Add PCIe bridge node
arm64: dts: qcom: msm8996: Add PCIe bridge node
arm64: dts: qcom: sc8180x: Add PCIe bridge node
arm64: dts: qcom: qcs404: Add PCIe bridge node
arm64: dts: qcom: sc7280: Add PCIe bridge node
arm64: dts: qcom: msm8998: Add PCIe bridge node
arm64: dts: qcom: sc8280xp: Add PCIe bridge node
arm64: dts: qcom: sa8775p: Add PCIe bridge node
arm64: dts: qcom: sm8650: Add PCIe bridge node
arm64: dts: qcom: sm8550: Add PCIe bridge node
arm64: dts: qcom: sm8450: Add PCIe bridge node
arm64: dts: qcom: sm8350: Add PCIe bridge node
arm64: dts: qcom: sm8150: Add PCIe bridge node
arm64: dts: qcom: sdm845: Add PCIe bridge node
arm64: dts: qcom: sm8250: Add PCIe bridge node
arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on
...
Link: https://lore.kernel.org/r/20240427175951.1439887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.10
The QCA8074 PHY package found in IPQ4019 is properly described.
The Sony Xperia Z2 Tablet is cleaned up and improved, vibrator support
is added, upon support for Sony Xperia Z3 is added.
Also based on MSM8974, support for Samsung Galaxy S5 China is introduced.
The WiFi board type is added for these "klte" Samsung devices, to select
appropriate NVRAM firmware file.
Based on MSM8226, support for Motorola Moto G (2013) is added.
Nodes representing the PCIe bridges under existing controllers are added
for APQ8064, IPQ4019, IPQ8064, and SDX55.
A number of fixes throughout to improve compliance with DeviceTree
bindings.
* tag 'qcom-arm32-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn)
ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type
ARM: dts: qcom: msm8974: Split out common part of samsung-klte
ARM: dts: qcom: sdx55: Add PCIe bridge node
ARM: dts: qcom: apq8064: Add PCIe bridge node
ARM: dts: qcom: ipq4019: Add PCIe bridge node
ARM: dts: qcom: ipq8064: Add PCIe bridge node
ARM: dts: qcom: msm8974-sony-shinano: Enable vibrator
ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes
ARM: dts: qcom: Add support for Motorola Moto G (2013)
dt-bindings: arm: qcom: Add Motorola Moto G (2013)
ARM: dts: qcom: msm8974: Add empty chosen node
ARM: dts: qcom: msm8974: Add @0 to memory node name
ARM: dts: qcom: Add Sony Xperia Z3 smartphone
ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common
ARM: dts: qcom: msm8916: idle-state compatible require the generic idle-state
ARM: dts: qcom: include cpu in idle-state node names
ARM: dts: qcom: msm8974pro-castor: Rename wifi node name
ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys
ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions
...
Link: https://lore.kernel.org/r/20240427163625.1432458-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new boards: RG35XX 2024, RG35XX-Plus, RG35XX-H
* tag 'sunxi-dt-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h700: Add RG35XX-H DTS
arm64: dts: allwinner: h700: Add RG35XX-Plus DTS
arm64: dts: allwinner: h700: Add RG35XX 2024 DTS
dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants
Link: https://lore.kernel.org/r/20240427133006.GA146501@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Changes for v6.10-rc1
Adds the Security Engine devices found on Tegra234 and fixes RTC aliases
by referencing them by label rather than path so that errors can be
detected more easily.
* tag 'tegra-for-6.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add Tegra Security Engine DT nodes
arm64: tegra: Correct Tegra132 I2C alias
Link: https://lore.kernel.org/r/20240426180519.3972626-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Changes for v6.10-rc1
Adds support for EMC frequency scaling on PAZ100 devices with RAM code 1
and cleans up deprecated device tree properties.
* tag 'tegra-for-6.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tegra20-ac97: Replace deprecated "gpio" suffix
ARM: tegra: paz00: Add emc-tables for ram-code 1
Link: https://lore.kernel.org/r/20240426180519.3972626-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.10-rc1
Included is one change that adds the dma-coherent flag to the device
tree json-schema for host1x on Tegra194 and Tegra234.
* tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: Allow dma-coherent on Tegra194 and later
Link: https://lore.kernel.org/r/20240426180519.3972626-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- added multicolor LED node for pinephone
- marked pinephone LEDs to retain status in suspend
- DT cleanups & fixes
- fixed A64 GPU frequency at 432 MHz
- added H616 NMI node
- new boards: PocketBook 614 Plus, Tanix TX1
* tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add NMI device node
arm64: dts: allwinner: Add Tanix TX1 support
dt-bindings: arm: sunxi: document Tanix TX1 name
ARM: dts: sun5i: Add PocketBook 614 Plus support
dt-bindings: arm: sunxi: Add PocketBook 614 Plus
arm64: dts: allwinner: h616: Fix I2C0 pins
arm64: dts: allwinner: a64: Run GPU at 432 MHz
arm: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Orange Pi: delete node by phandle
arm64: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3
arm64: dts: allwinner: pinephone: add multicolor LED node
arm64: dts: allwinner: pinephone: Retain LEDs state in suspend
Link: https://lore.kernel.org/r/20240426164510.GA101219@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.10 (take two)
- Add external interrupt (IRQC) support for the RZ/Five SoC,
- Add SPI (MSIOF), external interrupt (INTC-EX), and IOMMU support for
the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779h0: Link IOMMU consumers
arm64: dts: renesas: r8a779h0: Add IPMMU nodes
arm64: dts: renesas: r8a779h0: Add INTC-EX node
arm64: dts: renesas: r8a779h0: Add MSIOF nodes
arm64: dts: renesas: rzg3s-smarc-som: Enable eMMC by default
riscv: dts: renesas: rzfive-smarc-som: Drop deleting interrupt properties from ETH0/1 nodes
arm64: dts: renesas: r9a07g043: Move interrupt-parent property to common DTSI
riscv: dts: renesas: r9a07g043f: Add IRQC node to RZ/Five SoC DTSI
arm64: dts: renesas: s4sk: Fix ethernet0 alias
Link: https://lore.kernel.org/r/cover.1714116737.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: ArmSom Sige7, GameForce Chi,Forlinx FET3588-C with OK3588-C
baseboard, Protonic MECSBC, Wolfvision PF5.
The panthor driver for Mali Valhall GPUs landed, so a number of boards
enable their gpu (Cool Pi, Theobroma-Systems boards, QuartzPro64,
Rock5b, EVB1)
Also the USBDP phy driver landed, allowing the usb3 dual-role controllers
to be used on EVB1, Rock 5A and 5B, Indiedroid-Nova, Theobroma-Systems
Tiger and Jaguar.
A lot new peripherals for the Khadas Edge 2 (rtc, uart, sfc, adc, ir,
usb, pcie, tf-card, pmic); PCIe3 support on Jaguar, audio support for
the rk3308 and cache descriptions for rk356x and rk3328.
Corrected model names for boards from Radxa, Pine64, Powkiddy, Anberic
and general more dt cleanups.
* tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits)
arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou
arm64: dts: rockchip: add usb-id extcon on rk3588 tiger
arm64: dts: rockchip: fix comment for upper usb3 port
arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tiger
arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boards
arm64: dts: rockchip: Correct the model names for Pine64 boards
dt-bindings: arm: rockchip: Correct the descriptions for Pine64 boards
arm64: dts: rockchip: Add ArmSom Sige7 board
dt-bindings: arm: rockchip: Add ArmSoM Sige7
dt-bindings: vendor-prefixes: add ArmSoM
arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar
arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger
arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-nova
arm64: dts: rockchip: correct the model name for Radxa ROCK 3A
dt-bindings: arm: rockchip: correct the model name for Radxa ROCK 3A
arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boards
dt-bindings: arm: rockchip: Correct the descriptions for Radxa boards
arm64: dts: rockchip: add lower USB3 port to rock-5b
arm64: dts: rockchip: add upper USB3 port to rock-5a
arm64: dts: rockchip: add USB3 to rk3588-evb1
...
Link: https://lore.kernel.org/r/15361932.O9o76ZdvQC@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.10, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add and enable LTDC display (rocktech,rk043fn48h)
on stm32mp135f-dk.
- Add firewall bus based on ETZPC firewall controller.
- Add PWR regulator support: Can be only used if the platform is
set as "no-secure" (RCC_SECCFGR cleared) either use SCMI
regulator.
- STMP32MP15:
- Add firewall bus based on ETZPC firewall controller.
- Add heartbeat on stm32mp157c-ed1.
- STM32MP25:
- Add firewall bus based on RIFSC firewall controller.
- Add clock support (RCC) based on SCMI clock protocol for root clocks.
- Add all I2C instances and declare i2c2/i2c8 on stm32mp257f-ev1.
- Add all SPI instances. and declare spi3/spi8 on stm32mp257f-ev1.
* tag 'stm32-dt-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits)
arm64: dts: st: correct masks for GIC PPI interrupts on stm32mp25
arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1
arm64: dts: st: add spi3/spi8 pins for stm32mp25
arm64: dts: st: add all 8 spi nodes on stm32mp251
arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
arm64: dts: st: add i2c2/i2c8 pins for stm32mp25
arm64: dts: st: add all 8 i2c nodes on stm32mp251
arm64: dts: st: add rcc support for STM32MP25
ARM: dts: stm32: enable display support on stm32mp135f-dk board
ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
dt-bindings: display: simple: allow panel-common properties
ARM: dts: stm32: add PWR regulators support on stm32mp131
media: dt-bindings: add access-controllers to STM32MP25 video codecs
ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
ARM: dts: stm32: move can3 node from stm32f746 to stm32f769
ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
...
Link: https://lore.kernel.org/r/2040767c-413e-4447-b354-c44999930e4c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/hisilicon/linux-hisi into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v6.10
- Move non-MMIO node out of soc for the hip05, hip06 and hip07 SoC
- Miscellaneous fixes and improvements like correcting unit addresses and
missing reg
* tag 'hisi-arm64-dt-for-6.10' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi6220: correct tsensor unit addresses
arm64: dts: hisilicon: hi6220-hikey: drop unit addresses from fixed regulators
arm64: dts: hisilicon: hi6220-hikey: add missing port@0 reg
arm64: dts: hisilicon: hip07: correct unit addresses
arm64: dts: hisilicon: hip07: move non-MMIO node out of soc
arm64: dts: hisilicon: hip06: correct unit addresses
arm64: dts: hisilicon: hip06: move non-MMIO node out of soc
arm64: dts: hisilicon: hip05-d02: correct local-bus unit addresses
arm64: dts: hisilicon: hip05: move non-MMIO node out of soc
Link: https://lore.kernel.org/r/662A4115.9020805@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.10
1. Add FIFO depth to each SPI node so we can avoid matching this through
DTS alias. Difference SPI instances on given SoC have different FIFO
depths.
2. Exynos850: add clock controllers providing clocks to CPUs.
3. Google GS101: few cleanups and add missing serial engine (USI)
interface nodes.
* tag 'samsung-dt64-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: define all PERIC USI nodes
arm64: dts: exynos: gs101: join lines close to 80 chars
arm64: dts: exynos: gs101: move pinctrl-* properties after clocks
arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi
arm64: dts: exynos: gs101: reorder pinctrl-* properties
arm64: dts: exynos850: Add CPU clocks
arm64: dts: exynosautov9: specify the SPI FIFO depth
arm64: dts: exynos5433: specify the SPI FIFO depth
Link: https://lore.kernel.org/r/20240425071856.9235-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.10
1. Few cleanups of deprecated properties and node names pointed out by
bindings newly converted to DT schema.
2. Fix S5PV210 NAND node size-cells, pointed out by DT schema.
3. Add FIFO depth to each SPI node so we can avoid matching this through
DTS alias. Difference SPI instances on given SoC have different FIFO
depths.
4. Fix Exynos4212 Galaxy Tab3 usable memory, because stock bootloader is
not telling us truth.
* tag 'samsung-dt-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos4212-tab3: limit usable memory range
ARM: dts: samsung: s5pv210: specify the SPI FIFO depth
ARM: dts: samsung: exynos5420: specify the SPI FIFO depth
ARM: dts: samsung: exynos5250: specify the SPI FIFO depth
ARM: dts: samsung: exynos4: specify the SPI FIFO depth
ARM: dts: samsung: exynos3250: specify the SPI FIFO depth
ARM: dts: samsung: s5pv210: correct onenand size-cells
ARM: dts: samsung: s5pv210: align onenand node name with bindings
ARM: dts: samsung: exynos5800-peach-pi: switch to undeprecated DP HPD GPIOs
ARM: dts: samsung: smdk4412: align keypad node names with dtschema
ARM: dts: samsung: smdk4412: fix keypad no-autorepeat
ARM: dts: samsung: exynos4412-origen: fix keypad no-autorepeat
ARM: dts: samsung: smdkv310: fix keypad no-autorepeat
Link: https://lore.kernel.org/r/20240425071856.9235-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.10
Update n900 charge limit, and make use of the clksel binding for dra7
for the clksel clocks and other dpll output related clocks.
* tag 'omap-for-v6.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Use clksel binding for CTRL_CORE_SMA_SW_0
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_USB
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_PER
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_ABE_PLL_SYS
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_CORE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_EVE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GMAC
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DRR
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GPU
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_IVA
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DSP
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_CORE
ARM: dts: n900: set charge current limit to 950mA
Link: https://lore.kernel.org/r/pull-1714020191-304166@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
it doesn't provide any detail on uarch specific events.
There's still remaining cases for CPUs without any corresponding PMU
definition and for big.LITTLE systems which only have a single PMU node
(there should be one per core type).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20240417203853.3212103-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.10
- Add HDMI capture support for the Function expansion board for the
Eagle development board,
- Add PMIC support for the RZ/G2UL SMARC EVK development board,
- Add thermal, more serial ((H)SCIF), and timer (CMT and TMU) support
for the R-Car V4M SoC,
- Add Timer Unit (TMU) support for the R-Mobile APE6, R-Car Gen2, and
RZ/G1 SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Fix Ethernet aliases
arm64: dts: renesas: r8a779h0: Add TMU nodes
arm64: dts: renesas: r8a779h0: Add CMT nodes
arm64: dts: renesas: gray-hawk-single: Enable nfsroot
ARM: dts: renesas: r9a06g032: Remove duplicate interrupt-parent
arm64: dts: renesas: gray-hawk-single: Add second debug serial port
arm64: dts: renesas: r8a779h0: Add SCIF nodes
arm64: dts: renesas: r8a779h0: Add remaining HSCIF nodes
ARM: dts: renesas: rcar-gen2: Add TMU nodes
ARM: dts: renesas: rzg1: Add TMU nodes
ARM: dts: renesas: r8a73a4: Add TMU nodes
ARM: dts: renesas: r7s72100: Add interrupt-names to SCIF nodes
arm64: dts: renesas: r8a779h0: Add thermal nodes
arm64: dts: renesas: rzg2ul-smarc: Enable PMIC and built-in RTC, GPIO and ONKEY
arm64: dts: renesas: eagle: Add capture overlay for Function expansion board
Link: https://lore.kernel.org/r/cover.1712915536.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.10
- Document support for the Renesas RZ/V2H(P) (R9A09G057) SoC variants.
* tag 'renesas-dt-bindings-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas RZ/V2H(P) System Controller
dt-bindings: soc: renesas: Document Renesas RZ/V2H(P) SoC variants
Link: https://lore.kernel.org/r/cover.1712915534.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dtb: pwm@20f8000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dtb: pwm@20f0000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@22a8000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm nodes as
the soc dtsi doesn't disable these devices. Drop these properties, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable this device. Drop this property, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable this device. Drop this property, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6sll-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable this device. Drop this property, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6sl-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable these devices. Drop this property, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6q-novena.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
