summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-30counter: ftm-quaddec: Drop unused platform_set_drvdata()Uwe Kleine-König
The driver doesn't ever use platform_get_drvdata, so drop this unused call. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211230150300.72196-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30counter: Use container_of instead of drvdata to track counter_deviceUwe Kleine-König
The counter core uses drvdata to find a struct counter_device from a struct device. However as the device is a member of struct counter_device, the lookup can be done faster (and a bit type safe) using container_of. There are no other users of drvdata, so the call to dev_set_drvdata can go away, too. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211230150300.72196-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30mei: hbm: fix client dma reply statusAlexander Usyskin
Don't blindly copy status value received from the firmware into internal client status field, It may be positive and ERR_PTR(ret) will translate it into an invalid address and the caller will crash. Put the error code into the client status on failure. Fixes: 369aea845951 ("mei: implement client dma setup.") Cc: <stable@vger.kernel.org> # v5.11+ Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Tested-by: : Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20211228082047.378115-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30misc: lattice-ecp3-config: Fix task hung when firmware load failedWei Yongjun
When firmware load failed, kernel report task hung as follows: INFO: task xrun:5191 blocked for more than 147 seconds. Tainted: G W 5.16.0-rc5-next-20211220+ #11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004 Call Trace: __schedule+0xc12/0x4b50 kernel/sched/core.c:4986 schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1) schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857 wait_for_completion+0x181/0x290 kernel/sched/completion.c:85 lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221 spi_remove+0x72/0xb0 drivers/spi/spi.c:409 lattice_ecp3_remove() wait for signals from firmware loading, but when load failed, firmware_load() does not send this signal. This cause device remove hung. Fix it by sending signal even if load failed. Fixes: 781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30Merge tag 'phy-for-5.17' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.17 - New support: - Qualcomm eDP PHY driver - Qualcomm SM8450 UFS, USB2, USB3, PCIe0 and PCIe1 phy support - Lan966x ethernet serdes PHY driver - Support for uniphier NXI & Pro4 SoC - Qualcomm SM6350 USB2 support - Amlogic Meson8 HDMI TX PHY driver - Rockchip rk3568 usb2 support - Intel Thunder Bay eMMC PHY driver - Freescale IMX8 PCIe phy driver - Updates: - Cadence Sierra driver updates for multilink configurations - Bcm usb2 updates for Phy reg space * tag 'phy-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: cadence: Sierra: Add support for derived reference clock output dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clock phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration phy: cadence: Sierra: Add support for PHY multilink configurations phy: cadence: Sierra: Fix to get correct parent for mux clocks phy: cadence: Sierra: Update single link PCIe register configuration phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation phy: cadence: Sierra: Check cmn_ready assertion during PHY power on phy: cadence: Sierra: Add PHY PCS common register configurations phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation phy: cadence: Sierra: Add support to get SSC type from device tree dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic names phy: cadence: Sierra: Prepare driver to add support for multilink configurations phy: cadence: Sierra: Use of_device_get_match_data() to get driver data phy: mediatek: Fix missing check in mtk_mipi_tx_probe phy: uniphier-usb3ss: fix unintended writing zeros to PHY register phy: phy-mtk-tphy: use new io helpers to access register phy: phy-mtk-xsphy: use new io helpers to access register phy: mediatek: add helpers to update bits of registers ...
2021-12-30Merge tag 'soundwire-5.17-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.17-rc1 - Remove redundant version number read in qcom driver * tag 'soundwire-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: qcom: remove redundant version number read
2021-12-29Merge tag 'iio-for-5.17b' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 2nd set of new device support etc for IIO in the 5.17 cycle. A small additional set of things that just missed the previous pull request and have mostly been through plenty of review before the holiday period began (or are trivial). I've not taken some other series on the list to allow for more eyes after the holiday period. New device support * adi,admv1013 - New driver for this wideband microwave upconverter including dt-bindings and some device specific ABI due to the need to describe phase calibrations of a differential channel on both i and q phases. Previously we could do differential or i/q but not both on the same channel. The driver ABI uses a workaround for core support which will do until we know if this is a common requirement for which a more generic solution is needed. MAINTAINERS: * Add Haibo Chen as a maintainer for various NXP SoC ADCs. Minor cleanup: * sunrise_co2 - Make sure an uninitialized value isn't used to set *val in read_raw(). Not a real bug, but a compiler or reviewer can't tell that based on what they can see locally. * tag 'iio-for-5.17b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: chemical: sunrise_co2: set val parameter only on success dt-bindings:iio:adc: update the maintainer of vf610-adc MAINTAINERS: add imx7d/imx6sx/imx6ul/imx8qxp and vf610 adc maintainer Documentation:ABI:testing:admv1013: add ABI docs dt-bindings: iio: frequency: add admv1013 doc iio: frequency: admv1013: add support for ADMV1013
2021-12-29cxl: use default_groups in kobj_typeGreg Kroah-Hartman
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the cxl code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Cc: Frederic Barrat <fbarrat@linux.ibm.com> Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211228131350.249532-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29UIO: use default_groups in kobj_typeGreg Kroah-Hartman
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the UIO code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lore.kernel.org/r/20211228131319.249324-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-28iio: chemical: sunrise_co2: set val parameter only on successTom Rix
Clang static analysis reports this representative warning sunrise_co2.c:410:9: warning: Assigned value is garbage or undefined *val = value; ^ ~~~~~ The ealier call to sunrise_read_word can fail without setting value. So defer setting val until we know the read was successful. Fixes: c397894e24f1 ("iio: chemical: Add Senseair Sunrise 006-0-007 driver") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20211224150833.3278236-1-trix@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-27phy: cadence: Sierra: Add support for derived reference clock outputSwapnil Jakhade
Sierra has derived differential reference clock output which is sourced after the spread spectrum generation has been added. Add support to drive derived reference clock out of serdes. Model this derived clock as a "clock" so that platforms using this can enable it. Sierra Main LC VCO PLL divider 1 clock is programmed to output 100MHz clock output. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-16-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clockSwapnil Jakhade
Add clock ID for Sierra derived reference clock. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211223060137.9252-15-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configurationSwapnil Jakhade
Add register sequences for PCIe + QSGMII PHY multilink configuration. PHY configuration for multi-link operation is done in two steps. e.g. Consider a case for a 4 lane PHY with PCIe using 2 lanes and QSGMII other 2 lanes. Sierra PHY has 2 PLLs, viz. PLLLC and PLLLC1. So in this case, PLLLC is used for PCIe and PLLLC1 is used for QSGMII. PHY is configured in two steps as described below. [1] For first step, the register values are selected as [TYPE_PCIE][TYPE_QSGMII][ssc]. This will configure PHY registers associated for PCIe involving PLLLC registers and registers for first 2 lanes of PHY. [2] In second step, the register values are selected as [TYPE_QSGMII][TYPE_PCIE][ssc]. This will configure PHY registers associated for QSGMII involving PLLLC1 registers and registers for other 2 lanes of PHY. This completes the PHY configuration for multilink operation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-14-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add support for PHY multilink configurationsSwapnil Jakhade
Add support for multilink configuration of Sierra PHY. Currently, maximum two links are supported. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-13-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Fix to get correct parent for mux clocksSwapnil Jakhade
Fix get_parent() callback to return the correct index of the parent for PLL_CMNLC1 clock. Add a separate table of register values corresponding to the parent index for PLL_CMNLC1. Update set_parent() callback accordingly. Fixes: 28081b72859f ("phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)") Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-12-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Update single link PCIe register configurationSwapnil Jakhade
Add single link PCIe register configurations for no SSC and internal SSC. Also, add missing PMA lane registers for external SSC. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-11-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operationSwapnil Jakhade
PIPE phy status is used to communicate the completion of several PHY functions. Check if PHY is ready for operation while configured for PIPE mode during startup. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-10-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Check cmn_ready assertion during PHY power onSwapnil Jakhade
Check if PMA cmn_ready is set indicating the startup process is complete. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-9-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add PHY PCS common register configurationsSwapnil Jakhade
Add PHY PCS common register configuration sequences for single link. Update single link PCIe register sequence accordingly. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-8-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra ↵Swapnil Jakhade
documentation No functional change. Rename some regmap variables as mentioned in Sierra register description documentation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-7-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add support to get SSC type from device treeSwapnil Jakhade
Add support to get SSC type from DT. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-6-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27dt-bindings: phy: cadence-sierra: Add binding to specify SSC modeSwapnil Jakhade
Add binding to specify Spread Spectrum Clocking mode used. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211223060137.9252-5-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic namesSwapnil Jakhade
Rename SSC macros to use generic names instead of PHY specific names, so that they can be used to specify SSC modes for both Torrent and Sierra. Renaming the macros should not affect the things as these are not being used in any DTS file yet. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211223060137.9252-4-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Prepare driver to add support for multilink configurationsSwapnil Jakhade
Sierra driver currently supports single link configurations only. Prepare driver to support multilink multiprotocol configurations along with different SSC modes. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-3-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Use of_device_get_match_data() to get driver dataSwapnil Jakhade
Use of_device_get_match_data() to get driver data instead of boilerplate code. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: mediatek: Fix missing check in mtk_mipi_tx_probeMiaoqian Lin
The of_device_get_match_data() function may return NULL. Add check to prevent potential null dereference. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211224082103.7658-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27mei: cleanup status before client dma setup callAlexander Usyskin
The upper layer may retry call to mei_cl_dma_alloc_and_map(), in that case the client status may be non-zero after the previous call and the wait condition will be true immediately. Set cl->status to zero to allow waiting for an actual result from the firmware. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20211223094705.204624-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-27mei: add POWERING_DOWN into device state printAlexander Usyskin
The POWERING_DOWN state string was missing from the device states list, add it. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20211223094705.204624-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-27Merge tag 'misc-habanalabs-next-2021-12-27' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next Oded writes: This tag contains habanalabs driver changes for v5.17: - Support reset-during-reset. In case the f/w notifies the driver that the f/w is going to reset the device, the driver should support that even if it is in the middle of doing another reset - Support events from f/w that arrive during device resets. These events would be ignored which is bad as critical errors would not be reported and treated by the driver. - Don't kill processes that hold the control device open during hard-reset of the device. The control device operations can't crash if done during hard-reset. And usually, only monitoring applications are using the control device, so killing them defies their purpose. - Fix handling of hwmon nodes when working with legacy f/w - Change the compute context pointer to be boolean. This pointer was abused by multiple code paths that wanted fast access to the compute context structure. - Add uapi to fetch historical errors. This is necessary as errors sometimes result in hard-reset where the user application is being terminated. - Optimize GAUDI's MMU cache invalidation. - Add support for loading the latest f/w. - Add uapi to fetch HBM replacement and pending rows information. - Multiple bug fixes to the reset code. - Multiple bug fixes for Multi-CS ioctl code. - Multiple bug fixes for wait-for-interrupt ioctl code. - Many small bug fixes and cleanups. * tag 'misc-habanalabs-next-2021-12-27' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (70 commits) habanalabs: support hard-reset scheduling during soft-reset habanalabs: add a lock to protect multiple reset variables habanalabs: refactor reset information variables habanalabs: handle skip multi-CS if handling not done habanalabs: add CPU-CP packet for engine core ASID cfg habanalabs: replace some -ENOTTY with -EINVAL habanalabs: fix comments according to kernel-doc habanalabs: fix endianness when reading cpld version habanalabs: change wait_for_interrupt implementation habanalabs: prevent wait if CS in multi-CS list completed habanalabs: modify cpu boot status error print habanalabs: clean MMU headers definitions habanalabs: expose soft reset sysfs nodes for inference ASIC habanalabs: sysfs support for two infineon versions habanalabs: keep control device alive during hard reset habanalabs: fix hwmon handling for legacy f/w habanalabs: add current PI value to cpu packets habanalabs: remove in_debug check in device open habanalabs: return correct clock throttling period habanalabs: wait again for multi-CS if no CS completed ...
2021-12-27Merge tag 'extcon-next-for-5.17' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon next for v5.17 Detailed description for this pull request: 1. Remove duplicate code in extcon_set_state_sync() in extcon core 2. Fix non-kernel-doc comment for extcon-usb-gpio.c * tag 'extcon-next-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: Deduplicate code in extcon_set_state_sync() extcon: usb-gpio: fix a non-kernel-doc comment
2021-12-27Merge tag 'icc-5.17-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.17 Here are the interconnect changes for the 5.17-rc1 merge window consisting of new drivers, minor changes and fixes. New drivers: - New driver for MSM8996 platforms - New driver for SC7280 EPSS L3 hardware - New driver for QCM2290 platforms - New driver for SM8450 platforms Driver changes: - dt-bindings: interconnect: Combine SDM660 bindings into RPM schema - icc-rpm: Add support for bus power domain - icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check - icc-rpm: Define ICC device type - icc-rpm: Add QNOC type QoS support - icc-rpm: Support child NoC device probe - icc-rpm: Prevent integer overflow in rate - icc-rpmh: Add BCMs to commit list in pre_aggregate Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add QCM2290 driver support dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support interconnect: icc-rpm: Support child NoC device probe interconnect: icc-rpm: Add QNOC type QoS support interconnect: icc-rpm: Define ICC device type interconnect: qcom: Add SM8450 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SM8450 DT bindings interconnect: qcom: rpm: Prevent integer overflow in rate interconnect: icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate interconnect: qcom: Add MSM8996 interconnect provider driver dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings interconnect: icc-rpm: Add support for bus power domain dt-bindings: interconnect: Combine SDM660 bindings into RPM schema interconnect: qcom: Add EPSS L3 support on SC7280 dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
2021-12-26habanalabs: support hard-reset scheduling during soft-resetOfir Bitton
As hard-reset can be requested during soft-reset, driver must allow it or else critical events received during soft-reset will be ignored. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: add a lock to protect multiple reset variablesOfir Bitton
Atomic operations during reset are replaced by a spinlock in order to have the ability to protect more than a single variable. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: refactor reset information variablesOfir Bitton
Unify variables related to device reset, which will help us to add some new reset functionality in future patches. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: handle skip multi-CS if handling not doneOhad Sharabi
This patch fixes issue in which we have timeout for multi-CS although the CS in the list actually completed. Example scenario (the two threads marked as WAIT for the thread that handles the wait_for_multi_cs and CMPL as the thread that signal completion for both CS and multi-CS): 1. Submit CS with sequence X 2. [WAIT]: call wait_for_multi_cs with single CS X 3. [CMPL]: CS X do invoke complete_all for both CS and multi-CS (multi_cs_completion_done still false) 4. [WAIT]: enter poll_fences, reinit the completion and find the CS as completed when asking on the fence but multi_cs_done is still false it returns that no CS actually completed 5. [CMPL]: set multi_cs_handling_done as true 6. [WAIT]: wait for completion but no CS to awake the wait context and hence wait till timeout Solution: if CS detected as completed in poll_fences but multi_cs_done is still false invoke complete_all to the multi-CS completion and so it will not go to sleep in wait_for_completion but rather will have a "second chance" to wait for multi_cs_completion_done. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: add CPU-CP packet for engine core ASID cfgTomer Tayar
In some cases the driver cannot configure ASID of some engines due to the security level of the relevant registers. For this a new CPU-CP packet is introduced, which will allow the driver to ask the F/W to do this configuration instead. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: replace some -ENOTTY with -EINVALOded Gabbay
-ENOTTY is returned in case of error in the ioctl arguments themselves, such as function that doesn't exists. In all other cases, where the error is in the arguments of the custom data structures that we define that are passed in the various ioctls, we need to return -EINVAL. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: fix comments according to kernel-docOfir Bitton
Fix missing fields, descriptions not according to kernel-doc style. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: fix endianness when reading cpld versionOfir Bitton
Current sysfs implementation does not take endianness into consideration when dumping the cpld version. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: change wait_for_interrupt implementationfarah kassabri
Currently the cq counters are allocated in userspace memory, and mapped by the driver to the device address space. A new requirement that is part of new future API related to this one, requires that cq counters will be allocated in kernel memory. We leverage the existing cb_create API with KERNEL_MAPPED flag set to allocate this memory. That way we gain two things: 1. The memory cannot be freed while in use since it's protected by refcount in driver. 2. No need to wake up the user thread upon each interrupt from CQ, because the kernel has direct access to the counter. Therefore, it can make comparison with the target value in the interrupt handler and wake up the user thread only if the counter reaches the target value. This is instead of waking the thread up to copy counter value from user then go sleep again if target value wasn't reached. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: prevent wait if CS in multi-CS list completedOhad Sharabi
By the original design we assumed that if we "miss" multi CS completion it is of no severe consequence as we'll just call wait_for_multi_cs again. Sequence of events for such scenario: 1. user submit CS with sequence N 2. user calls wait for multi-CS with only CS #N in the list 3. the multi CS call starts with poll of the CSs but find that none completed (while CS #N did not completed yet) 4. now, multi CS #N complete but multi CS CTX was not yet created for the above multi-CS. so, attempt to complete multi-CS fails (as no multi CS CTX exist) 5. wait_for_multi_cs call now does init_wait_multi_cs_completion (and for this create the multi-CS CTX) 6. wait_for_multi_cs wits on completion but will not get one as CS #N already completed To fix the issue we initialize the multi-CS CTX prior polling the fences. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: modify cpu boot status error printOfir Bitton
As BTL can be replaced by ROM we should modify relevant error print. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: clean MMU headers definitionsOhad Sharabi
During the MMU development the MMU header files were left with unclean definitions: - MMU "version specific" definitions that were left in the mmu_general file - unused definitions This patch attempts, where possible, to keep definitions that can serve multiple MMU versions (but that are not tightly bound with specific MMU arch) in the mmu_general header file (e.g. different definitions for number of HOPs). Otherwise, move MMU version specific definitions (e.g. HOPs masks and shifts) to the specific MMU version file. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: expose soft reset sysfs nodes for inference ASICOfir Bitton
As we allow soft-reset to be performed only on inference devices, having the sysfs nodes may cause a confusion. Hence, we remove those nodes on training ASICs. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: sysfs support for two infineon versionsOfir Bitton
Currently sysfs support dumping a single infineon version, in future asics we will have two infineon versions. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: keep control device alive during hard resetDani Liberman
Need to allow user retrieve data during reset and afterwards without the need to reopen the device. Did it by seperating the user peocesses list into two lists: 1. fpriv_list which contains list of user processes that opened the device (currently only one). 2. fpriv_ctrl_list which contains list of user processes that opened the control device. This processes in this list shall not be killed during reset, only when the device is suddenly removed from PCI chain. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: fix hwmon handling for legacy f/wOded Gabbay
In legacy f/w that use old hwmon.h file, the values of the hwmon enums are different than the values that are in newer kernels (5.6 and above). Therefore, to support working with those f/w, we need to do some fixup before registering with the hwmon subsystem and also when calling the functions that communicate with the f/w to retrieve sensors information. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: add current PI value to cpu packetsOfir Bitton
In order to increase cpucp messaging reliability we will add the current PI value to the descriptor sent to F/W. F/W will wait for the PI value as an indication of a valid packet. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: remove in_debug check in device openOded Gabbay
The driver supports only a single user anyway, so there is no point in checking whether we are in_debug state when a user tries to open the device, because if we are in_debug, it means a user is already using the device. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-12-26habanalabs: return correct clock throttling periodOfir Bitton
Current clock throttling period returned from driver was wrong due to wrong time comparison. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
generated by cgit (git 2.34.1) at 2024-07-06 10:09:14 +0000