summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-22rtw88: add beacon filter supportPo-Hao Huang
Adding this supports beacon filter and CQM. Let firmware perform connection quality monitor and beacon processing. This make host CPU wakeup less under power save mode. To make mechanisms work as usual, fw will notify driver events such as signal change and beacon loss. This feature needs firmware 9.9.8 or newer to support it, and driver is compatible with older firmware. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210426013252.5665-1-pkshih@realtek.com
2021-06-19rtl8xxxu: avoid parsing short RX packetÍñigo Huguet
One USB data buffer can contain multiple received network packets. If that's the case, they're processed this way: 1. Original buffer is cloned 2. Original buffer is trimmed to contain only the first network packet 3. This first network packet is passed to network stack 4. Cloned buffer is trimmed to eliminate the first network packet 5. Repeat with the cloned buffer until there are no more network packets inside However, if the space remaining in original buffer after the first network packet is not enough to contain at least another network packet descriptor, it is not cloned. The loop parsing this packets ended if remaining space == 0. But if the remaining space was > 0 but < packet descriptor size, another iteration of the loop was done, processing again the previous packet because cloning didn't happen. Moreover, the ownership of this packet had been passed to network stack in the previous iteration. This patch ensures that no extra iteration is done if the remaining size is not enough for one packet, and also avoid the first iteration for the same reason. Probably this doesn't happen in practice, but can happen theoretically. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511071926.8951-1-ihuguet@redhat.com
2021-06-19rtl8xxxu: Fix device info for RTL8192EU devicesPascal Terjan
Based on 2001:3319 and 2357:0109 which I used to test the fix and 0bda:818b and 2357:0108 for which I found efuse dumps online. == 2357:0109 == === Before === Vendor: Realtek Product: \x03802.11n NI Serial: === After === Vendor: Realtek Product: 802.11n NIC Serial not available. == 2001:3319 == === Before === Vendor: Realtek Product: Wireless N Serial: no USB Adap === After === Vendor: Realtek Product: Wireless N Nano USB Adapter Serial not available. Signed-off-by: Pascal Terjan <pterjan@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com
2021-06-19Merge tag 'mt76-for-kvalo-2021-06-18' of https://github.com/nbd168/wireless ↵Kalle Valo
into pending mt76 patches for 5.14 * mt7915 MSI support * disable ASPM on mt7915 * mt7915 tx status reporting * mt7921 decap offload * driver fixes * cleanups * mt7921 runtime power management improvements * testmode improvements/fixes * runtime PM improvements
2021-06-19mt76: mt7921: allow chip reset during device restartLorenzo Bianconi
Disable chip full reset just during device probing but allow it during hw restart. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7615: set macwork timeout according to runtime-pmLorenzo Bianconi
Set macwork timeout value according to runtime-pm in order to reduce power consumption Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7663s: enable runtime-pmLorenzo Bianconi
Allow the user to enable runtime-pm for mt7663s driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7663s: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx pathLorenzo Bianconi
Similar to mt7663e, rely on mt76_connac_pm_ref/mt76_connac_pm_unref to check PM state and increment/decrement wake counter Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7663s: rely on pm reference countingLorenzo Bianconi
As already done for mt7921 and mt7663e, rely on pm reference counting in drv/fw_own Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: sdio: do not run mt76_txq_schedule directlyLorenzo Bianconi
In order to support runtime-pm for sdio, do not run mt76_txq_schedule directly, but schedule tx_worker instead Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: enable HE BFee capabilityDeren Wu
Enables HE MU/SU beamformee functionality Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: disable TWT capabilities for the momentLorenzo Bianconi
Disable TWT REQ/RES mac capabilities since TWT is not supported yet in mt7915/mt7921. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: fix iv and CCMP header insertionRyder Lee
The iv from RXD is only for TKIP_RSC/CCMP_PN/GCMP_PN, and it needs a check for CCMP header insertion. Move mt76_cipher_type to mt76.h to reduce duplicated code. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: fix the coredump is being truncatedSean Wang
Fix the maximum size of the coredump generated with current mt7921 firmware. Otherwise, a truncated coredump would be reported to userland via dev_coredumpv. Also, there is an additional error handling enhanced in the patch to avoid the possible invalid buffer access when the system failed to create the buffer to hold the coredump. Fixes: 0da3c795d07b ("mt76: mt7921: add coredump support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: fix kernel warning when reset on vif is not staSean Wang
ieee80211_disconnect is only called for the staton mode. [ 714.050429] WARNING: CPU: 1 PID: 382 at net/mac80211/mlme.c:2787 ieee80211_disconnect+0x108/0x118 [mac80211] [ 714.116704] Hardware name: MediaTek Asurada rev1 board (DT) [ 714.122303] Workqueue: mt76 mt7921_mac_reset_work [mt7921e] [ 714.127877] pstate: 20c00009 (nzCv daif +PAN +UAO) [ 714.132761] pc : ieee80211_disconnect+0x108/0x118 [mac80211] [ 714.138430] lr : mt7921_vif_connect_iter+0x28/0x54 [mt7921e] [ 714.144083] sp : ffffffc0107cbbd0 [ 714.147394] x29: ffffffc0107cbbd0 x28: ffffffb26c9cb928 [ 714.152706] x27: ffffffb26c9cbd98 x26: 0000000000000000 [ 714.158017] x25: 0000000000000003 x24: ffffffb26c9c9c38 [ 714.163328] x23: ffffffb26c9c9c38 x22: ffffffb26c9c8860 [ 714.168639] x21: ffffffb23b940000 x20: ffffffb26c9c8860 [ 714.173950] x19: 0000000000000001 x18: 000000000000b67e [ 714.179261] x17: 00000000064dd409 x16: ffffffd739cb28f0 [ 714.184571] x15: 0000000000000000 x14: 0000000000000227 [ 714.189881] x13: 0000000000000400 x12: ffffffd73a4eb060 [ 714.195191] x11: 0000000000000000 x10: 0000000000000000 [ 714.200502] x9 : ffffffd703a0a000 x8 : 0000000000000006 [ 714.205812] x7 : 2828282828282828 x6 : ffffffb200440396 [ 714.211122] x5 : 0000000000000000 x4 : 0000000000000004 [ 714.216432] x3 : 0000000000000000 x2 : ffffffb23b940c90 [ 714.221743] x1 : 0000000000000001 x0 : ffffffb23b940c90 [ 714.227054] Call trace: [ 714.229594] ieee80211_disconnect+0x108/0x118 [mac80211] [ 714.234913] mt7921_vif_connect_iter+0x28/0x54 [mt7921e] [ 714.240313] __iterate_interfaces+0xc4/0xdc [mac80211] [ 714.245541] ieee80211_iterate_interfaces+0x4c/0x68 [mac80211] [ 714.251381] mt7921_mac_reset_work+0x410/0x468 [mt7921e] [ 714.256696] process_one_work+0x208/0x3c8 [ 714.260706] worker_thread+0x23c/0x3e8 [ 714.264456] kthread+0x140/0x17c [ 714.267685] ret_from_fork+0x10/0x18 Fixes: 0c1ce9884607 ("mt76: mt7921: add wifi reset support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: introduce dedicated control for deep_sleepLorenzo Bianconi
Introduce ds_enable switch to fully control fw deep_sleep capability Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: limit txpower according to userlevel powerLorenzo Bianconi
Limit tx power for single-sku according to userlevel power. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: improve code readability for mt7921_update_txsLorenzo Bianconi
Introduce mt7921_update_txs routine in order to improve code readability for tx timestamp parsing/configuration. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: add deep sleep control to runtime-pm knobSean Wang
Add addtional the deep sleep control to runtime-pm knob to allow us to control driver switching between the full power mode and the deep sleep mode the firmware is able to support. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: enable deep sleep at runtimeSean Wang
Enable the deep sleep mode with that firmware is able to trap into the doze state at runtime to reduce the power consumption further. The deep sleep mode is not allowed in the STA state transition with the firmware to have the fast connection experience as we've done in the full power mode Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station modeRyder Lee
The value of station mode is always 0. Fixed: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: use SPDX header file comment styleTom Rix
header files should use '/* SPDX ... */ Change from c file comment syle to header style Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: add a space between comment char and SPDX tagTom Rix
checkpatch expects a space between '#' and 'SPDX...' Add a space. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: improve MU stabilityRyder Lee
- Adjust starec flow since VHT MU group is only updated by starec_vht follows starec_bf settings. - Drop unnecessary MU BF checks. TX MPDU PER (Status = Success): TOT_MPDU_CNT FAIL_MPDU_CNT TX_PER WCID Rate 1 VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF 114 0 0.00% VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF_MU 64 0 0.00% VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF 128 0 0.00% VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF_MU 745 0 0.00% VHT_BW80_2SS_MCS8_LGI_LDPC_MUBF_MU 856 0 0.00% VHT_BW80_2SS_MCS8_SGI_LDPC_MUBF_MU 1430 4 0.28% VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF_MU 5220 31 0.59% VHT_BW80_2SS_MCS9_LGI_LDPC_iBF 59 0 0.00% VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF 64 2 3.12% VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF_MU 22132 76 0.34% VHT_BW80_2SS_MCS9_SGI_LDPC_iBF 2866 1 0.03% 2 VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF_MU 3781 5 0.13% VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF_MU 735 0 0.00% VHT_BW80_2SS_MCS8_LGI_LDPC_MUBF_MU 1270 365 28.74% VHT_BW80_2SS_MCS8_SGI_LDPC_MUBF_MU 3420 57 1.67% VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF 128 0 0.00% VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF_MU 64 0 0.00% VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF 191 0 0.00% VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF_MU 18833 320 1.70% VHT_BW80_2SS_MCS9_SGI_LDPC_iBF 6040 0 0.00% 287 OFDM 6M Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: introduce mt7915_mcu_set_txbf()Ryder Lee
Use mt7915_mcu_set_txbf() to reduce global functions. This can be easily extended to support other TxBF commands in further patches. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: make mt76_update_survey() per phyRyder Lee
Reduce duplicated survey for DBDC. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: drop the use of repeater entries for station interfacesFelix Fietkau
There are firmware or hardware issues, which are currently causing tx hangs when attempting to use these interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: connac: check band caps in mt76_connac_mcu_set_rate_txpowerLorenzo Bianconi
Check device band capabilities before configuring single-sku Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: move mt76_get_next_pkt_id in mt76.hLorenzo Bianconi
In order to remove duplicated code, move mt76_get_next_pkt_id routine in mt76.h Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: reduce rx buffer size to 2048Lorenzo Bianconi
Reduce rx buffer size to 2048 for mt7921/mt7915/mt7615 since we now support rx amsdu offload Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: connac: fix the maximum interval schedule scan can supportSean Wang
Maximum interval (in seconds) for schedule scan plan supported by the offload firmware can be U16_MAX. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: fix rx fcs error count in testmodeShayne Chen
FCS error packets are filtered by default and won't be reported to driver, so that RX fcs error and PER in testmode always show zero. Fix this issue by reading fcs error count from hw counter. We did't fix this issue by disabling fcs error rx filter since it may let HW suffer some SER errors. Fixes: 5d8a83f09941 ("mt76: mt7915: implement testmode rx support") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: testmode: move chip-specific stats dump before common statsShayne Chen
Move chip-specific stats dumping part before common stats dumping to provide flexibility for per-chip driver to modify the value of common stats. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: connac: add mt76_connac_mcu_get_nic_capability utility routineLorenzo Bianconi
Introduce mt76_connac_mcu_get_nic_capability utility routine to poll device capabilities returned by mcu fw for CE devices (mt7663/mt7921). This is a preliminary patch to introduce 6GHz support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: make mt7921_set_channel staticLorenzo Bianconi
Make mt7921_set_channel routine static since it is only used in main.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: wake the device before dumping power tableLorenzo Bianconi
Always wake the device up before dumping the single_sku power table otherwise the device can hang. Fixes: ea29acc97c555 ("mt76: mt7921: add dumping Tx power table") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: connac: add mt76_connac_power_save_sched in mt76_connac_pm_unrefLorenzo Bianconi
Schedule power_save work running mt76_connac_pm_unref in order to reduce power consumption Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: connac: fix UC entry is being overwrittenLorenzo Bianconi
Fix UC entry is being overwritten by BC entry Tested-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: enable VHT BFee capabilityFelix Fietkau
Enables VHT beamformee functionality Signed-off-by: Leon Yen <Leon.Yen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: fix MT_EE_CAL_GROUP_SIZERyder Lee
Fix wrong offset for pre-calibration data. Fixes: 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7615: update radar parametersRyder Lee
Patch radar parameters to match the SDK to avoid possible false alarms. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: setup drr group for peersRyder Lee
This is a prerequisite for MU functionality. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: enable random mac address during sched_scanDeren Wu
Enable src address randomization during scheduled scanning Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: remove mt7921_get_wtbl_info routineLorenzo Bianconi
Since now the fw reports tx rate events without polling, mt7921_get_wtbl_info and related structures are no longer used. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: enable hw offloading for wep keysLorenzo Bianconi
Enable wep key hw offloading for sta mode. This patch fixes WoW support for wep connections. Tested-by: Deren.Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: read all eeprom fields from fw in efuse modeShayne Chen
If efuse mode is used, read all values from fw during eeprom init, which makes it more convinient to check if rf values in efuse are properly burned. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: use mt7915_mcu_get_mib_info() to get survey dataRyder Lee
Firmware functions (SCS, MU ...) also require read-clear phy counters, hence firmware prepares a global task to read shared fields out to a shared pool to avoid concurrency. Switch to event format accordingly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: set MT76_RESET during mac resetLorenzo Bianconi
Set MT76_RESET during mt7921_mac_reset in order to avoid packet transmissions. Move tx scheduling at the end of reset routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: improve error recovery reliabilityFelix Fietkau
- Remove no-op code for queue lock/unlock, which is no longer needed - Set a missing DMA flag - Wait for full completion of error recovery before restarting tx - Schedule IRQ tasklet to ensure that IRQ mask gets written Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: allow hw driver code to overwrite wiphy interface_modesLorenzo Bianconi
Move wiphy interface_modes configuration in mt76_alloc_device and mt76_alloc_phy in order to be overwritten by hw specific code since some drivers do not support all operating modes (mt7921 supports sta only in the current codebase) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-05-25 13:54:38 +0000