summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-05-15sh: hd64461: Fix up I/O base register offsets.Paul Mundt
hd64461 is mapped in a fixed location, so the I/O base itself is fairly meaningless as a configuration item. Additionally, this makes it impossible to share hd64461 code alongside generic drivers (in the case of sh_dac_audio), so simply make it commonly defined and permit the mach_is_foo() logic to work out the proper semantics. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-14sh: intc tables for sh7770Magnus Damm
This patch adds INTC tables for sh7770, thanks goes to Paul for the first prototype version. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-14sh: Provide FORCE_MAX_ZONEORDER.Paul Mundt
Several platforms want to be able to do large physically contiguous allocations (primarily nommu and video codecs on SH-Mobile), provide a MAX_ORDER override for those cases. Tested-by: Conrad Parker <conrad@metadecks.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: Kill off the remnants of the old timer code.Paul Mundt
Now with all of the TMU users moved over to the new TMU driver, and the old TMU driver killed off, the left-over infrastructure can go along with it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: remove old TMU driverMagnus Damm
This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c) As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU and configure timer channel using platform data. If multiple TMU channels are enabled using platform data, use the earlytimer parameter on the kernel command line to select channel. For instance, use "earlytimer=sh_tmu.0" to select the first channel. To verify which timer is being used, look at printouts or the timer irq count in /proc/interrupts. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: CMT platform data for sh7720/sh7721Magnus Damm
This patch adds CMT platform data for sh7720 and sh7721. All 5 32-bit CMT channels unfortunately share a single IRQ. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7720/sh7721Magnus Damm
This patch adds TMU platform data for sh7720 and sh7721. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7710/sh7712Magnus Damm
This patch adds TMU platform data for sh7710 and sh7712. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7706/sh7707/sh7708/sh7709Magnus Damm
Add TMU platform data for sh7706/sh7707/sh7708/sh7709. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7705Magnus Damm
This patch adds TMU platform data for sh7705. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7724Magnus Damm
This patch adds TMU platform data for sh7724. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7366Magnus Damm
This patch adds TMU platform data for sh7366. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7343Magnus Damm
This patch adds TMU platform data for sh7343. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: add sh4-202 INTC tablesMagnus Damm
This patch adds INTC tables for sh4-202 with support for HUDI, TMU0, TMU1, TMU2, RTC, SCIF and WDT. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh4-202Magnus Damm
This patch adds TMU platform data for sh4-202. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7770Magnus Damm
This patch adds TMU platform data for sh7770. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: add sh7770_generic_defconfigMagnus Damm
This patch adds a generic sh7770 defconfig file. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7763Magnus Damm
This patch adds TMU platform data for sh7763. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: TMU platform data for sh7780Magnus Damm
This patch adds TMU platform data for sh7780. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: r7780 highlander clock fixesMagnus Damm
Update the r7780 highlander defconfig to fix PCLK value, while at it fix cmdline on r7785. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: multiple vectors per irq - sh7760Magnus Damm
Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7760 hardware blocks such as DMAC/TMU2/REF. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: TMU platform data for sh7760Magnus Damm
This patch adds TMU platform data for sh7760. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: TMU platform data for sh775xMagnus Damm
This patch adds TMU platform data for sh775x. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: include empty_zero_page in textMagnus Damm
Include empty_zero_page in _text. This fixes a problem introduced by c3e2586b794b12ffcdf69b4e547030b51e18e6d9 which results in broken boot on R2D-Plus. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: sh7785lcr: fix I2C device address map for 32-bit modeYoshihiro Shimoda
This fixes up the broken I2C offset in 32-bit mode. The cause is because the board datasheet had a mistake. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: Account for INITIAL_JIFFIES when using jiffies clocksource.Paul Mundt
In the case where we fall back on the generic jiffies clocksource, INITIAL_JIFFIES needs to be accounted for so that printk times aren't completely skewed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-11sh: Fix up typo in arch/sh/kernel/vmlinux.lds.SPaul Mundt
.init_ramfs ought to be .init.ramfs, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Fix up R0 dependence in __arch_swab16/32.Paul Mundt
There is nothing in these routines that inherently depends on R0 use. Given that these routines are inlined, it is rather easy to blow up the compiler by exhausting the spill class when performing a 64-bit swab. This presently manifests itself as the following: CC fs/ocfs2/suballoc.o fs/ocfs2/suballoc.c: In function 'ocfs2_reserve_suballoc_bits': fs/ocfs2/suballoc.c:638: error: unrecognizable insn: (insn 2793 1230 1231 103 arch/sh/include/asm/swab.h:33 (set (reg:HI 853) (subreg:HI (reg:SI 149 macl) 2)) -1 (expr_list:REG_DEAD (reg:SI 149 macl) (nil))) fs/ocfs2/suballoc.c:638: internal compiler error: in extract_insn, at recog.c:1991 This patch switches over to using an arbitrarily assigned register instead. While the same issue does not exist in the SH-5 case, there is likewise no harm in having an alternate register used for the byterev/shari pair. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Hook up cc-cross-prefix support.Paul Mundt
This implements a simple case that just iterates through the common cases, looking at UTS_MACHINE for hints. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Consolidate the boot link and entry offset definitions.Paul Mundt
Consolidate these in a single place in the Kconfig menus. At the same time, disable their interactivity and set them according to the board config defaults. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Merge the split arch/sh/boot/compressed/ Makefiles.Paul Mundt
This kills off the _64 variant and moves the _32 one over as the generic one to use. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Provide a BITS definition, use it in the arch/sh/boot/ Makefiles.Paul Mundt
This introduces a BITS export that can handily be picked up by Makefiles for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in preparation for unifying the Makefiles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Provide a tighter BOOT_LINK_OFFSET definition for the Cayman board.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Fix up the sh64 zImage build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10sh: Tidy up the ldscript output format specifier.Paul Mundt
Tie this in to the Makefile directly, where we already know what we are running on. This tidies up the linker script a bit, and is prep work for unifying the arch/sh/boot/compressed linker scripts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Move the unified linker script in place, kill off old _64 one.Paul Mundt
Just forcefully rename the _32 variant overtop, and kill off the now unused _64 version. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Integrate sh64 bits in vmlinux_32.lds.S.Paul Mundt
This adds all of the requisite bits from vmlinux_64.lds.S in to the _32 variant, resulting in a unified and generic linker script that can be shared across both. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Fix up SHmedia module ELF relocations.Paul Mundt
This fixes up the LSB setting for SHmedia branching in updated symbols when processing module relocations. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Provide an __sdivsi3_2 export for sh64.Paul Mundt
Newer code paths that are heavier in 64-bit math manage to get this generated by newer compilers, provide a definition and export accordingly. This is trivially wrapped around the existing __sdivsi3 code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Rename opcode_t to insn_size_t.Paul Mundt
This is now clashing with a driver, so just rename it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Provide __read_{read,write}sl() definitions for sh64.Paul Mundt
These are presently only defined for sh32, use the plain unoptimized versions for sh64. Fixes up smsc911x build. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Cleanup irqflags size mismatch on SH-5 build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Fix up the sh64 earlyprintk build.Paul Mundt
sci_rxd_in() on SH-5 wants to be using SCSPTR, not SCSPTR2. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Add UBC trap vector for SH2APeter Griffin
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Add ptrace support for NOMMU debuggingPeter Griffin
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Fix UBC setup and registers for SH2AKieran Bingham
Signed-off-by: Kieran Bingham <kieranbingham@gmail.com> Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-09sh: Add in some ptrace definitions from GDB.Kieran Bingham
Plugs in PT_TEXT_END_ADDR/PT_TEXT_ADDR/PT_DATA_ADDR/PT_TEXT_LEN definitions. Signed-off-by: Kieran Bingham <kieranbingham@gmail.com> Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08serial: sh-sci: Fix up h8300 support.Yoshinori Sato
- Dummy SCIF functions define. - h8300 specific header include. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08serial: sh-sci: Fix up section mismatch in error path.Paul Mundt
The sci_probe_single() path attempts to use sci_remove() for the error path, while sci_remove() is still flagged as __devexit. So, we simply discard the section annotation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08sh: Add clock id to sh-sci platform data on SH-Mobile CPUs.Paul Mundt
This adds the clock specifier to all of the SH-Mobile sh-sci ports. Impacted CPUs are SH7343/SH7366/SH7722/SH7723/SH7724. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit (git 2.34.1) at 2024-07-08 01:48:30 +0000