summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-04drm/msm: Fix error handling crashes seen when VRAM allocation failsArchit Taneja
If VRAM allocation fails, the error handling path crashes in msm_drm_uninit(). The following changes are made to fix this: msm_gem_shrinker_cleanup() is fixed to unregister the shrinker only if it was init-ed in the first place. Before calling kms->funcs->destroy(), we check if kms->funcs is also non-NULL. This is needed for MDP5, since during msm_drm_int(), priv->kms becomes non-NULL early, but msm_kms_init() is called on it only later in mdp5_kms_init(). Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Andy Gross <andy.gross@linaro.org>
2016-11-04drm/i915/dp: Extend BDW DP audio workaround to GEN9 platformsDhinakaran Pandiyan
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: stable@vger.kernel.org Cc: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
2016-11-04drm/i915/dp: BDW cdclk fix for DP audioDhinakaran Pandiyan
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Cc: stable@vger.kernel.org Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com
2016-11-04pinctrl: bcm2835: reduce GPPUD set-up timeStefan Wahren
Since the BCM2835 datasheet doesn't exactly specify the set-up time for the GPIO Pull-up/down Clock Registers there was an assumption of 150 cycles at a clock rate of 1 MHz. During a discussion [1] in the Raspberry Pi forum it turns out that clock rate refers to the VPU which has a rate of 250 MHz. So we can reduce the delay to a sensible value and update the comment above. I tested this optimization with a Raspberry Pi B and a multimeter. [1] - https://www.raspberrypi.org/forums/viewtopic.php?f=72&t=163352 Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: cherryview: Drop ctrlX prefix from the pin debugfs outputMika Westerberg
Printing the prefix does not provide any additional information. In addition this makes the output look more consistent with pinctrl-intel.c. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: zynq: Add a 8 bit wide nand optionJason Gunthorpe
The hardware supports a 16 and 8 bit wide NAND bus, let users pick either. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04ARM: dts: stm32f429: add LSI and LSE clocksGabriel Fernandez
This patch adds lsi / lse oscillators. These clocks can be use by RTC clocks. The clock drivers needs to disable the power domain write protection using syscon / regmap to enable these clocks. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: stm32f429: remove Ethernet wake on Lan supportAlexandre TORGUE
This patch removes WoL (Wake on Lan) support as it is not yet fully supported and tested. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: stm32f429: Fix Ethernet node on Eval BoardAlexandre TORGUE
"phy-handle" entry is mandatory when mdio subnode is used in Ethernet node. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: stm32f429: Align Ethernet node with new bindings propertiesAlexandre TORGUE
This patch aligns clocks names and node reference according to new stm32-dwmac glue binding. It also renames Ethernet pinctrl phandle (indeed there is no need to add 0 as Ethernet instance as there is only one IP in SOC). Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: DT: stm32: move dma translation to board filesAlexandre TORGUE
stm32f469-disco and stm32f429-eval boards use SDRAM start address remapping (to @0) to boost performances. A DMA translation through "dma-ranges" property was needed for other masters than the M4 CPU. stm32f429-disco doesn't use remapping so doesn't need this DMA translation. This patches moves this DMA translation definition from stm32f429 soc file to board files. Tested-by: Bruno Herrera <bruherrera@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: DT: STM32: add dma for usart3 on F429Alexandre TORGUE
Add DMA support for USART3 on STM32F429 MCU. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: DT: STM32: add dma for usart1 on F429Gerald Baeza
Tested-by: Bruno Herrera <bruherrera@gmail.com> Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: Declare push button as GPIO key on stm32f429 boardsMaxime Coquelin
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: Add GPIO irq support to STM32F429Maxime Coquelin
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: armada-370-rn102: add pinmuxing for i2c0Uwe Kleine-König
Up to now a working i2c bus depended on the bootloader to configure the pinmuxing. Make it explicit. As a side effect this change makes i2c work in barebox. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-04ARM: dts: armada-370-rn102: drop specification of compatible for i2c0Uwe Kleine-König
The compatible string is already provided by armada-370.dtsi. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-11-04drm/i915: Fix pages pin counting around swizzle quirkChris Wilson
commit bc0629a76726 ("drm/i915: Track pages pinned due to swizzling quirk") fixed one problem, but revealed a whole lot more. The root cause of the pin count mismatch for the swizzle quirk (for L-shaped memory on gen3/4) was that we were incrementing the pages_pin_count upon getting the backing pages but then overwriting the pages_pin_count to set it to 1 afterwards. With a little bit of adjustment to satisfy the GEM_BUG_ON sanitychecks, the fix is to replace the explicit atomic_set with an atomic_inc. v2: Consistently use atomics (not mix atomics and helpers) within the lowlevel get_pages routines. This makes the atomic operations much clearer. Fixes: 1233e2db199d ("drm/i915: Move object backing storage manipulation") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161104103001.27643-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-11-04batman-adv: Detect missing primaryif during tp_send as errorSven Eckelmann
The throughput meter detects different situations as problems for the current test. It stops the test after these and reports it to userspace. This also has to be done when the primary interface disappeared during the test. Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-04batman-adv: Revert "fix splat on disabling an interface"Sven Eckelmann
The commit 9799c50372b2 ("batman-adv: fix splat on disabling an interface") fixed a warning but at the same time broke the rtnl function add_slave for devices which were temporarily removed. batadv_softif_slave_add requires soft_iface of and hard_iface to be NULL before it is allowed to be enslaved. But this resetting of soft_iface to NULL in batadv_hardif_disable_interface was removed with the aforementioned commit. Reported-by: Julian Labus <julian@freifunk-rtk.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-04kvm/page_track: export symbols for external usageJike Song
Signed-off-by: Jike Song <jike.song@intel.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-04kvm/page_track: call notifiers with kvm_page_track_notifier_nodeJike Song
The user of page_track might needs extra information, so pass the kvm_page_track_notifier_node to callbacks. Signed-off-by: Jike Song <jike.song@intel.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-04KVM: x86: add track_flush_slot page track notifierXiaoguang Chen
When a memory slot is being moved or removed users of page track can be notified. So users can drop write-protection for the pages in that memory slot. This notifier type is needed by KVMGT to sync up its shadow page table when memory slot is being moved or removed. Register the notifier type track_flush_slot to receive memslot move and remove event. Reviewed-by: Xiao Guangrong <guangrong.xiao@intel.com> Signed-off-by: Chen Xiaoguang <xiaoguang.chen@intel.com> [Squashed commits to avoid bisection breakage and reworded the subject.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-11-04MAINTAINERS: oxnas: Add new files definitionsNeil Armstrong
Fix the dts files maintained by the OXNAS platform, add a new board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-04ARM: dts: Add support for OX820 and Pogoplug V3Neil Armstrong
Add device tree for the Oxford Seminconductor OX820 SoC and the Cloud Engines PogoPlug v3 board. Add the SoC and board compatible strings to oxnas bindings. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-04ARM: dts: r8a7794: remove Z clockSergei Shtylyov
R8A7794 doesn't have Cortex-A15 CPUs, thus there's no Z clock... Fixes: 0dce5454d5c2 ("ARM: shmobile: Initial r8a7794 SoC device tree") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7779: marzen: Configure pinmuxing for the DU0 input clockLaurent Pinchart
DU0 uses an externally provided clock, but the corresponding pin isn't correctly muxed. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: sh73a0: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7740: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7779: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7778: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: emev2: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7779: Fix DU reg propertyLaurent Pinchart
The system uses one address cell and one size cell, not two. Fix the DU DT node. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7793: Enable VIN0-VIN2Ulrich Hecht
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: koelsch: add HDMI inputHans Verkuil
Add support in the dts for the HDMI input. Based on the Lager dts patch from Ulrich Hecht. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [uli: removed "renesas," prefixes from pfc nodes] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: lager: Add entries for VIN HDMI input supportWilliam Towle
Add DT entries for vin0, vin0_pins, and adv7612. Sets the 'default-input' property for ADV7612, enabling image and video capture without the need to have userspace specifying routing. Signed-off-by: William Towle <william.towle@codethink.co.uk> Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk> [uli: added interrupt, renamed endpoint, merged default-input] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: rskrza1: add sdhi1 DT supportChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r7s72100: add sdhi to device treeChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7794: Fix W=1 dtc warningsGeert Uytterhoeven
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@9 has a unit name, but no reg property Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: gose: use generic pinctrl properties in SDHI nodesSimon Horman
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r7s72100: add sdhi clock to device treeChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r7s72100: add mmcif to device treeChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7792: add MSIOF supportSergei Shtylyov
Define the generic R8A7792 parts of the MSIOF0/1 device nodes. Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7792: add MSIOF clocksSergei Shtylyov
Describe the MSIOF0/1 clocks and their parent, MP clock in the R8A7792 device tree. Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: wheat: add DU supportSergei Shtylyov
Define the Wheat board dependent part of the DU device node. Add the device nodes for the Analog Devices ADV7513 HDMI transmitters connected to DU0/1. Add the necessary subnodes to interconnect DU with HDMI transmitters/connectors. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7794: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7793: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7791: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7790: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: alt: enable UHS for SDHI 0 & 1Simon Horman
Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1}. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
generated by cgit (git 2.34.1) at 2024-06-06 17:28:54 +0000