| Age | Commit message (Collapse) | Author |
|---|
|
The four checksum tests are similar, only one line is different. So
a for-loop can be used to simplify these tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-10-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test is supposed to be killed before the end, which will likely
cause "Connection reset by peer" errors. It is confusing, especially
because in case of real transfer errors, the test will not be marked as
failed. But that's OK, there are many other tests checking that.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-9-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before, the check names had to be very short. It is no longer the case
now that these checks are printed on a dedicated line.
Then, it looks better to have more explicit names.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-7-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few new MPJoinSynTx MIB counters have been added in a previous commit.
They are being validated here in mptcp_join.sh selftest, each time the
number of received MPJ are checked.
Most of the time, the number of sent SYN+MPJ is the same as the received
ones. But sometimes, there are more, because there are dropped, or there
are errors.
While at it, the "no MPC reuse with single endpoint" subtest has been
modified to force a bind() error.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most tests are checking if the expected number of SYN/SYN+ACK/ACK JOINs
have been received, each of them on one line.
More Join related tests are going to be checked soon, no need to add 5
new lines per test in case of success, just one is enough. In case of
issue, the errors will still be reported like before.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-5-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chk_join_nr() currently takes 9 positional parameters, 6 of them are
optional. It makes it hard to read:
chk_join_nr 1 1 1 1 0 1 1 0 4
Naming these vars helps to make it easier to read:
join_csum_ns1=1 join_csum_ns2=0 \
join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \
join_corrupted_pkts=4 \
chk_join_nr 1 1 1
It will then be easier to add new optional parameters.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, a few issues have been discovered around the creation of
additional subflows. Without these counters, it was difficult to point
out the reason why some subflows were not created as expected.
These counters should have been added earlier, because there is no other
simple ways to extract such information from the kernel, and understand
why subflows have not been created.
While at it, some pr_debug() have been added, just in case the errno
needs to be printed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/509
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-3-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__mptcp_subflow_connect() is currently called from the path-managers,
which have all the required information to create subflows. No need to
call the PM again to re-iterate over the list of entries with RCU lock
to get more info.
Instead, it is possible to pass a mptcp_pm_addr_entry structure, instead
of a mptcp_addr_info one. The former contains the ifindex and the flags
that are required when creating the new subflow.
This is a partial revert of commit ee285257a9c1 ("mptcp: drop flags and
ifindex arguments").
While at it, the local ID can also be set if it is known and 0, to avoid
having to set it in the 'rebuild_header' hook, which will cause a new
iteration of the endpoint entries.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-2-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename all the helpers specific to the flushing operations to make it
clear that the intention is to flush all created subflows, and remove
all announced addresses, not just a specific selection.
That way, it is easier to understand why the id_avail_bitmap and
local_addr_used are reset at the end.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-1-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gal Pressman says:
====================
RX software timestamp for all
All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of
net_timestamp_check() being called in the device independent code.
Following Willem's suggestion [1], make it so drivers do not have to
handle SOF_TIMESTAMPING_RX_SOFTWARE and SOF_TIMESTAMPING_SOFTWARE, nor
setting of the PHC index to -1.
All drivers will now report RX software timestamp as supported.
The series is limited to 15 patches, I will submit other drivers in
subsequent submissions.
[1] https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/
v1: https://lore.kernel.org/20240829144253.122215-1-gal@nvidia.com
====================
Link: https://patch.msgid.link/20240901112803.212753-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>
Link: https://patch.msgid.link/20240901112803.212753-16-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20240901112803.212753-15-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240901112803.212753-14-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240901112803.212753-13-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240901112803.212753-12-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20240901112803.212753-11-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240901112803.212753-10-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240901112803.212753-9-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20240901112803.212753-8-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240901112803.212753-7-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20240901112803.212753-6-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240901112803.212753-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240901112803.212753-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240901112803.212753-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of
net_timestamp_check() being called in the device independent code.
Move the responsibility of reporting SOF_TIMESTAMPING_RX_SOFTWARE and
SOF_TIMESTAMPING_SOFTWARE, and setting PHC index to -1 to the core.
Device drivers no longer need to use them.
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Link: https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/
Co-developed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240901112803.212753-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-30 (igc, e1000e, i40e)
This series contains updates to igc, e1000e, and i40 drivers.
Kurt Kanzenbach adds support for MQPRIO offloads and stops unintended,
excess interrupts on igc.
Sasha adds reporting of EEE (Energy Efficient Ethernet) ability and
moves a register define to a better suited file for igc.
Vitaly stops reporting errors on shutdown and suspend as they are not
fatal for e1000e.
Alex adds reporting of EEE to i40e.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Add Energy Efficient Ethernet ability for X710 Base-T/KR/KX cards
e1000e: avoid failing the system during pm_suspend
igc: Move the MULTI GBT AN Control Register to _regs file
igc: Add Energy Efficient Ethernet ability
igc: Get rid of spurious interrupts
igc: Add MQPRIO offload support
====================
Link: https://patch.msgid.link/20240830210451.2375215-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2024-09-01
Simon Horman catched two typos in our headers. No functional change.
* tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: Correct spelling in nl802154.h
mac802154: Correct spelling in mac802154.h
====================
Link: https://patch.msgid.link/20240901184213.2303047-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch improves two checks on user data.
The first one prevents bit 23 from being set, as specified by RFC 9197
(Sec 4.4.1):
Bit 23 Reserved; MUST be set to zero upon transmission and be
ignored upon receipt. This bit is reserved to allow for
future extensions of the IOAM Trace-Type bit field.
The second one checks that the tunnel destination address !=
IPV6_ADDR_ANY, just like we already do for the tunnel source address.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20240830191919.51439-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yue Haibing says:
====================
cleanup chelsio driver declarations
v2: correct patch 3 commit citation
====================
Link: https://patch.msgid.link/20240830093338.3742315-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These functions were never implenmented since introduction in
commit 8199d3a79c22 ("[PATCH] A new 10GB Ethernet Driver by Chelsio
Communications")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit e2d14b42c25c ("cxgb4: Remove WOL get/set ethtool support") removed
t4_wol_magic_enable() and t4_wol_pat_enable() but leave declarations.
Commit 02d805dc5fe3 ("cxgb4: use new fw interface to get the VIN and smt
index") leave behind cxgb4_tp_smt_idx().
cxgb4_dcb_set_caps() is never implemented and used since introduction in
commit 76bcb31efc06 ("cxgb4 : Add DCBx support codebase and dcbnl_ops").
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter,
T3.") declared but never implemented these.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The sctp selftest is very slow on debug kernels.
Its possible that the nf_queue listener program exits due to timeout
before first sctp packet is processed.
In this case socat hangs until script times out.
Fix this by removing the -t option where possible and kill the test
program once the file transfer/socat has exited.
-t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest
where we want to make sure that packets get reinjected properly without
skipping a second queue request.
While at it, add a helper to compare the (binary) files instead of diff.
The 'diff' part was copied from a another sub-test that compares text.
Let helper dump file sizes on error so we can see the progress made.
Tested on an old 2010-ish box with a debug kernel and 100 iterations.
This is a followup to the earlier filesize reduction change.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240829080109.GB30766@breakpoint.cc/
Fixes: 0a8b08c554da ("selftests: netfilter: nft_queue.sh: reduce test file size for debug build")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240830092254.8029-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jinjie Ruan says:
====================
net: Simplified with scoped function
Simplify with scoped for each OF child loop, as well as dev_err_probe().
Changes in v4:
- Drop the fix patch and __free() patch.
- Rebased on the fix patch has been stripped out.
- Remove the extra parentheses.
- Ensure Signed-off-by: should always be last.
- Add Reviewed-by.
- Update the cover letter commit message.
Changes in v3:
- Sort the variables, longest first, shortest last.
- Add Reviewed-by.
Changes in v2:
- Subject prefix: next -> net-next.
- Split __free() from scoped for each OF child loop clean.
- Fix use of_node_put() instead of __free() for the 5th patch.
====================
Link: https://patch.msgid.link/20240830031325.2406672-1-ruanjinjie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use scoped for_each_available_child_of_node_scoped() when
iterating over device nodes to make code a bit simpler.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop by using for_each_available_child_of_node_scoped().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating
over device nodes to make code a bit simpler.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the dev_err_probe() helper to simplify code.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop by using for_each_available_child_of_node_scoped().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Avoid need to manually handle of_node_put() by using
for_each_available_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Avoid need to manually handle of_node_put() by using
for_each_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Avoid need to manually handle of_node_put() by using
for_each_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Alexander Lobakin says:
====================
netdev_features: start cleaning netdev_features_t up
NETDEV_FEATURE_COUNT is currently 64, which means we can't add any new
features as netdev_features_t is u64.
As per several discussions, instead of converting netdev_features_t to
a bitmap, which would mean A LOT of changes, we can try cleaning up
netdev feature bits.
There's a bunch of bits which don't really mean features, rather device
attributes/properties that can't be changed via Ethtool in any of the
drivers. Such attributes can be moved to netdev private flags without
losing any functionality.
Start converting some read-only netdev features to private flags from
the ones that are most obvious, like lockless Tx, inability to change
network namespace etc. I was able to reduce NETDEV_FEATURE_COUNT from
64 to 60, which mean 4 free slots for new features. There are obviously
more read-only features to convert, such as highDMA, "challenged VLAN",
HSR (4 bits) - this will be done in subsequent series.
Please note that currently netdev features are not uAPI/ABI by any means.
Ethtool passes their names and bits to the userspace separately and there
are no hardcoded names/bits in the userspace, so that new Ethtool could
work on older kernels and vice versa.
This, however, isn't true for Ethtools < 3.4. I haven't changed the bit
positions of the already existing features and instead replaced the freed
bits with stubs. But it's anyway theoretically possible that Ethtools
older than 2011 will break. I hope no currently supported distros supply
such an ancient version.
Shell scripts also most likely won't break since the removed bits were
always read-only, meaning nobody would try touching them from a script.
====================
Link: https://patch.msgid.link/20240829123340.789395-1-aleksander.lobakin@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NETIF_F_ALL_FCOE is used only in vlan_dev.c, 2 times. Now that it's only
2 bits, open-code it and remove the definition from netdev_features.h.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ability to handle maximum FCoE frames of 2158 bytes can never be changed
and thus more of an attribute, not a toggleable feature.
Move it from netdev_features_t to "cold" priv flags (bitfield bool) and
free yet another feature bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make dev->priv_flags `u32` back and define bits higher than 31 as
bitfield booleans as per Jakub's suggestion. This simplifies code
which accesses these bits with no optimization loss (testb both
before/after), allows to not extend &netdev_priv_flags each time,
but also scales better as bits > 63 in the future would only add
a new u64 to the structure with no complications, comparing to
that extending ::priv_flags would require converting it to a bitmap.
Note that I picked `unsigned long :1` to not lose any potential
optimizations comparing to `bool :1` etc.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit introduces implementations of three functions:
.port_fdb_dump
.port_fdb_add
.port_fdb_del
The FDB database organization is the same as in other old Vitesse chips:
It has 2048 rows and 4 columns (buckets). The row index is calculated by
the hash function 'vsc73xx_calc_hash' and the FDB entry must be placed
exactly into row[hash]. The chip selects the bucket number by itself.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240827123938.582789-1-paweldembicki@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
