| Age | Commit message (Collapse) | Author |
|---|
|
In the function dpaa_napi_del(), we execute the netif_napi_del()
for each cpu, which is actually a high overhead operation
because each call to netif_napi_del() contains a synchronize_net(),
i.e. an RCU operation. In fact, it is only necessary to call
__netif_napi_del and use synchronize_net() once outside of the loop.
This change is similar to commit 2543a6000e593a ("gro_cells: reduce
number of synchronize_net() calls") and commit 5198d545dba8ad (" net:
remove napi_hash_del() from driver-facing API") 5198d545db.
Signed-off-by: Xi Huang <xuiagnh@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240822072042.42750-1-xuiagnh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_setsockopt() can directly call ip_setsockopt()
instead of going through udp_prot.setsockopt()
ipv6_getsockopt() can directly call ip_getsockopt()
instead of going through udp_prot.getsockopt()
These indirections predate git history, not sure why they
were there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240823140019.3727643-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The macro sk_for_each_bound_bhash accepts a parameter
__sk, but it was not used, rather the sk2 is directly
used, so we replace the sk2 with __sk in macro.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240823070453.3327832-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We found that one close-wait socket was reset by the other side
due to a new connection reusing the same port which is beyond our
expectation, so we have to investigate the underlying reason.
The following experiment is conducted in the test environment. We
limit the port range from 40000 to 40010 and delay the time to close()
after receiving a fin from the active close side, which can help us
easily reproduce like what happened in production.
Here are three connections captured by tcpdump:
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1
// a few seconds later, within 60 seconds
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2
127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193
// later, very quickly
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
As we can see, the first flow is reset because:
1) client starts a new connection, I mean, the second one
2) client tries to find a suitable port which is a timewait socket
(its state is timewait, substate is fin_wait2)
3) client occupies that timewait port to send a SYN
4) server finds a corresponding close-wait socket in ehash table,
then replies with a challenge ack
5) client sends an RST to terminate this old close-wait socket.
I don't think the port selection algo can choose a FIN_WAIT2 socket
when we turn on tcp_tw_reuse because on the server side there
remain unread data. In some cases, if one side haven't call close() yet,
we should not consider it as expendable and treat it at will.
Even though, sometimes, the server isn't able to call close() as soon
as possible like what we expect, it can not be terminated easily,
especially due to a second unrelated connection happening.
After this patch, we can see the expected failure if we start a
connection when all the ports are occupied in fin_wait2 state:
"Ncat: Cannot assign requested address."
Reported-by: Jade Dong <jadedong@tencent.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kyle Swenson says:
====================
net: pse-pd: tps23881: Reset GPIO support
On some boards, the TPS2388x's reset line (active low) is pulled low to
keep the chip in reset until the SoC pulls the device out of reset.
This series updates the device-tree binding for the tps23881 and then
adds support for the reset gpio handling in the tps23881 driver.
v1: https://lore.kernel.org/20240819190151.93253-1-kyle.swenson@est.tech
====================
Link: https://patch.msgid.link/20240822220100.3030184-1-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TPS23880/1 has an active-low reset pin that some boards connect to
the SoC to control when the TPS23880 is pulled out of reset.
Add support for this via a reset-gpios property in the DTS.
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240822220100.3030184-3-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TPS23881 has an active-low reset pin that can be connected to an
SoC. Document this with the device-tree binding.
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240822220100.3030184-2-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's only used in one place. It doesn't need to be in the struct.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240822192758.141201-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although commit 4a4cd70369f1 ("l2tp: don't set sk_user_data in tunnel socket")
removed sk->sk_user_data usage, setup_udp_tunnel_sock() still touches
sk->sk_user_data, this conflicts with sockmap which also leverages
sk->sk_user_data to save psock.
Restore this sk->sk_user_data check to avoid such conflicts.
Fixes: 4a4cd70369f1 ("l2tp: don't set sk_user_data in tunnel socket")
Reported-by: syzbot+8dbe3133b840c470da0e@syzkaller.appspotmail.com
Cc: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Tested-by: James Chapman <jchapman@katalix.com>
Reviewed-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20240822182544.378169-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sean Anderson says:
====================
net: xilinx: axienet: Multicast fixes and improvements
This series has a few small patches improving the handling of multicast
addresses. In particular, it makes the driver a whole lot less spammy,
and adjusts things so we aren't in promiscuous mode when we have more
than four multicast addresses (a common occurance on modern systems).
As the hardware has a 4-entry CAM, the ideal method would be to "pack"
multiple addresses into one CAM entry. Something like:
entry.address = address[0] | address[1];
entry.mask = ~(address[0] ^ address[1]);
Which would make the entry match both addresses (along with some others
that would need to be filtered in software).
Mapping addresses to entries in an efficient way is a bit tricky. If
anyone knows of an in-tree example of something like this, I'd be glad
to hear about it.
====================
Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for IFF_ALLMULTI by configuring a single filter to match the
multicast address bit. This allows us to keep promiscuous mode disabled,
even when we have more than four multicast addresses. An even better
solution would be to "pack" addresses into the available CAM registers,
but that can wait for a future series.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-6-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Contrary to the comment, we don't have to inform the net subsystem.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-5-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A message about being in promiscuous mode is printed every time each
additional multicast address beyond four is added. Suppress this message
like is done in other drivers.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-4-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Li Zetao says:
====================
Some modifications to optimize code readability
This patchset is mainly optimized for readability in contexts where size
needs to be determined. By using min() or max(), or even directly
removing redundant judgments (such as the 5th patch), the code is more
consistent with the context.
====================
Link: https://patch.msgid.link/20240822133908.1042240-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When calculating size of own domain based on number of peers, the result
should be less than MAX_MON_DOMAIN, so using min() here is very semantic.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-8-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When coping sockaddr in ip6_mc_msfget(), the time of copies
depends on the minimum value between sl_count and gf_numsrc.
Using min() here is very semantic.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-7-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When processing the tail append of sk buffer, the final length needs
to be determined based on expectlen and addlen. Using max() here can
increase the readability of the code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-4-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
net: header and core spelling corrections
This patchset addresses a number of spelling errors in comments in
Networking files under include/, and files in net/core/. Spelling
problems are as flagged by codespell.
It aims to provide patches that can be accepted directly into net-next.
And splits patches up based on maintainer boundaries: many things
feed directly into net-next. This is a complex process and I apologise
for any errors.
I also plan to address, via separate patches, spelling errors in other
files in the same directories, for files whose changes typically go
through trees other than net-next (which feed into net-next).
====================
Link: https://patch.msgid.link/20240822-net-spell-v1-0-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in net/core.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-13-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in Networking headers.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-12-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in x25.h
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20240822-net-spell-v1-11-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in sctp.h and structs.h.
As reported by codespell.
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-10-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in pkt_cls.h and red.h.
As reported by codespell.
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-9-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in NFC headers.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-8-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in netlabel.h.
As reported by codespell.
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-7-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in if_rmnet.h
As reported by codespell.
Cc: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-6-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in bond_3ad.h and bond_alb.h.
As reported by codespell.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-5-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in ip_tunnels.h
As reported by codespell.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-4-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in ip_tunnels.h
As reported by codespell.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-3-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in iucv.h
As reported by codespell.
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-2-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in if_packet.h
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-1-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MD Danish Anwar says:
====================
Add support for ICSSG PA_STATS
This series adds support for PA_STATS. Previously this series was a
standalone patch adding documentation for PA_STATS in dt-bindings file
ti,pruss.yaml.
v1 https://lore.kernel.org/all/20240430121915.1561359-1-danishanwar@ti.com/
v2 https://lore.kernel.org/all/20240529115149.630273-1-danishanwar@ti.com/
v3 https://lore.kernel.org/all/20240625153319.795665-1-danishanwar@ti.com/
v4 https://lore.kernel.org/all/20240729113226.2905928-1-danishanwar@ti.com/
v5 https://lore.kernel.org/all/20240814092033.2984734-1-danishanwar@ti.com/
v6 https://lore.kernel.org/all/20240820091657.4068304-1-danishanwar@ti.com/
====================
Link: https://patch.msgid.link/20240822122652.1071801-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for dumping PA stats registers via ethtool.
Firmware maintained stats are stored at PA Stats registers.
Also modify emac_get_strings() API to use ethtool_puts().
This commit also maintains consistency between miig_stats and pa_stats by
- renaming the array icssg_all_stats to icssg_all_miig_stats
- renaming the structure icssg_stats to icssg_miig_stats
- renaming ICSSG_STATS() to ICSSG_MIIG_STATS()
- changing order of stats related data structures and arrays so that data
structures of a certain stats type is clubbed together.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240822122652.1071801-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add documentation for pa-stats node which is syscon regmap for
PA_STATS registers. This will be used to dump statistics maintained by
ICSSG firmware.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240822122652.1071801-2-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oleksij Rempel says:
====================
Add ALCD Support to Cable Testing Interface
This patch series introduces support for Active Link Cable Diagnostics
(ALCD) in the ethtool cable testing interface and the DP83TD510 PHY
driver.
Why ALCD?
On a 10BaseT1L interface, TDR (Time Domain Reflectometry) is not
possible if the link partner is active - TDR will fail in these cases
because it requires interrupting the link. Since the link is active, we
already know the cable is functioning, so instead of using TDR, we can
use ALCD.
ALCD lets us measure cable length without disrupting the active link,
which is crucial in environments where network uptime is important. It
provides a way to gather diagnostic data without the need for downtime.
What's in this series:
- Extended the ethtool cable testing interface to specify the source of
diagnostic results (TDR or ALCD).
- Updated the DP83TD510 PHY driver to use ALCD when the link is
active, ensuring we can still get cable length info without dropping the
connection.
====================
Link: https://patch.msgid.link/20240822120703.1393130-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In industrial environments where 10BaseT1L PHYs are replacing existing
field bus systems like CAN, it's often essential to retain the existing
cable infrastructure. After installation, collecting metrics such as
cable length is crucial for assessing the quality of the infrastructure.
Traditionally, TDR (Time Domain Reflectometry) is used for this purpose.
However, TDR requires interrupting the link, and if the link partner
remains active, the TDR measurement will fail.
Unlike multi-pair systems, where TDR can be attempted during the MDI-X
switching window, 10BaseT1L systems face greater challenges. The TDR
sequence on 10BaseT1L is longer and coincides with uninterrupted
autonegotiation pulses, making TDR impossible when the link partner is
active.
The DP83TD510 PHY provides an alternative through ALCD (Active Link
Cable Diagnostics), which allows for cable length measurement without
disrupting an active link. Since a live link indicates no short or open
cable states, ALCD can be used effectively to gather cable length
information.
Enhance the dp83td510 driver by:
- Leveraging ALCD to measure cable length when the link is active.
- Bypassing TDR when a link is detected, as ALCD provides the required
information without disruption.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enhance the ethtool cable test interface by introducing the ability to
specify the source of the diagnostic information for cable test results.
This is particularly useful for PHYs that offer multiple diagnostic
methods, such as Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD).
Key changes:
- Added `ethnl_cable_test_result_with_src` and
`ethnl_cable_test_fault_length_with_src` functions to allow specifying
the information source when reporting cable test results.
- Updated existing `ethnl_cable_test_result` and
`ethnl_cable_test_fault_length` functions to use TDR as the default
source, ensuring backward compatibility.
- Modified the UAPI to support these new attributes, enabling drivers to
provide more detailed diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the ethtool netlink cable testing interface by adding support for
specifying the source of cable testing results. This allows users to
differentiate between results obtained through different diagnostic
methods.
For example, some TI 10BaseT1L PHYs provide two variants of cable
diagnostics: Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD). By introducing `ETHTOOL_A_CABLE_RESULT_SRC` and
`ETHTOOL_A_CABLE_FAULT_LENGTH_SRC` attributes, this update enables
drivers to indicate whether the result was derived from TDR or ALCD,
improving the clarity and utility of diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adds a selftest that creates two virtual interfaces, assigns one to a
new namespace, and assigns IP addresses to both.
It listens on the destination interface using socat and configures a
dynamic target on netconsole, pointing to the destination IP address.
The test then checks if the message was received properly on the
destination interface.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240822095652.3806208-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
netconsole: Populate dynamic entry even if netpoll fails
The current implementation of netconsole removes the entry and fails
entirely if netpoll fails to initialize. This approach is suboptimal, as
it prevents reconfiguration or re-enabling of the target through
configfs.
While this issue might seem minor if it were rare, it actually occurs
frequently when the network module is configured as a loadable module.
In such cases, the network is unavailable when netconsole initializes,
causing netpoll to fail. This failure forces users to reconfigure the
target from scratch, discarding any settings provided via the command
line.
The proposed change would keep the target available in configfs, albeit
in a disabled state. This modification allows users to adjust settings
or simply re-enable the target once the network module has loaded,
providing a more flexible and user-friendly solution.
v2: https://lore.kernel.org/20240819103616.2260006-1-leitao@debian.org
v1: https://lore.kernel.org/20240809161935.3129104-1-leitao@debian.org
====================
Link: https://patch.msgid.link/20240822111051.179850-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, netconsole discards targets that fail during initialization,
causing two issues:
1) Inconsistency between target list and configfs entries
* user pass cmdline0, cmdline1. If cmdline0 fails, then cmdline1
becomes cmdline0 in configfs.
2) Inability to manage failed targets from userspace
* If user pass a target that fails with netpoll (interface not loaded at
netcons initialization time, such as interface is a module), then
the target will not exist in the configfs, so, user cannot re-enable
or modify it from userspace.
Failed targets are now added to the target list and configfs, but
remain disabled until manually enabled or reconfigured. This change does
not change the behaviour if CONFIG_NETCONSOLE_DYNAMIC is not set.
CC: Aijay Adams <aijay@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240822111051.179850-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify netpoll_setup() and __netpoll_setup() to ensure that the netpoll
structure (np) is left in a clean state if setup fails for any reason.
This prevents carrying over misconfigured fields in case of partial
setup success.
Key changes:
- np->dev is now set only after successful setup, ensuring it's always
NULL if netpoll is not configured or if netpoll_setup() fails.
- np->local_ip is zeroed if netpoll setup doesn't complete successfully.
- Added DEBUG_NET_WARN_ON_ONCE() checks to catch unexpected states.
- Reordered some operations in __netpoll_setup() for better logical flow.
These changes improve the reliability of netpoll configuration, since it
assures that the structure is fully initialized or totally unset.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240822111051.179850-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Divya Koppera says:
====================
Adds support for lan887x phy
Adds support for lan887x phy and accept autoneg configuration in
phy driver only when feature is enabled in supported list.
v2: https://lore.kernel.org/20240813181515.863208-1-divya.koppera@microchip.com
v1: https://lore.kernel.org/20240808145916.26006-1-Divya.Koppera@microchip.com
====================
Link: https://patch.msgid.link/20240821055906.27717-1-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The LAN887x is a Single-Port Ethernet Physical Layer Transceiver compliant
with the IEEE 802.3bw (100BASE-T1) and IEEE 802.3bp (1000BASE-T1)
specifications. The device provides 100/1000 Mbit/s transmit and receive
capability over a single Unshielded Twisted Pair (UTP) cable. It supports
communication with an Ethernet MAC via standard RGMII/SGMII interfaces.
LAN887x supports following features,
- Events/Interrupts
- LED/GPIO Operation
- IEEE 1588 (PTP)
- SQI
- Sleep and Wakeup (TC10)
- Cable Diagnostics
First patch only supports 100Mbps and 1000Mbps force-mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20240821055906.27717-3-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
enabled
Adds support in phy library to accept autoneg configuration only when
feature is enabled in supported list.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240821055906.27717-2-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-08-23
We've added 10 non-merge commits during the last 15 day(s) which contain
a total of 10 files changed, 222 insertions(+), 190 deletions(-).
The main changes are:
1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime,
from Alan Maguire.
2) Add a batch of BPF selftest improvements which fix a few bugs and add
missing features to improve the test coverage of sockmap/sockhash,
from Michal Luczaj.
3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie()
which is part of the test_tcp_custom_syncookie BPF selftest,
from Kuniyuki Iwashima.
4) Fix the flow_dissector BPF selftest which had a bug in IP header's
tot_len calculation doing subtraction after htons() instead of inside
htons(), from Asbjørn Sloth Tønnesen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c.
selftests/bpf: Introduce __attribute__((cleanup)) in create_pair()
selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected()
selftests/bpf: Honour the sotype of af_unix redir tests
selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible()
selftests/bpf: Socket pair creation, cleanups
selftests/bpf: Support more socket types in create_pair()
selftests/bpf: Avoid subtraction after htons() in ipip tests
selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS
bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags
====================
Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 5fbf57a937f4 ("net: netlink: remove the cb_mutex "injection" from
netlink core") has removed the usage of the 'dump_cb_mutex' field from the
struct netlink_sock.
Remove the field itself now. It saves a few bytes in the structure.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When net devices propagate xdp configurations to slave devices,
we will need to perform a memory provider check to ensure we're
not binding xdp to a device using unreadable netmem.
Currently the ->ndo_bpf calls in a few places. Adding checks to all
these places would not be ideal.
Refactor all the ->ndo_bpf calls into one place where we can add this
check in the future.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Li Zetao says:
====================
net: Delete some redundant judgments
This patchset aims to remove some unnecessary judgments and make the
code more concise. In some network modules, rtnl_set_sk_err is used to
record error information, but the err is repeatedly judged to be less
than 0 on the error path. Deleted these redundant judgments.
No functional change intended.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
