| Age | Commit message (Collapse) | Author |
|---|
|
This change adds audio jack injection feature through debugfs, with
this feature, we could validate alsa userspace changes by injecting
plugin or plugout events to the non-phantom audio jacks.
With this change, the sound core will build the folders
$debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled.
And if users also enable the SND_JACK_INJECTION_DEBUG, the jack
injection nodes will be built in the folder cardN like below:
$tree $debugfs_mount_dir/sound
$debugfs_mount_dir/sound
├── card0
│ ├── HDMI_DP_pcm_10_Jack
│ │ ├── jackin_inject
│ │ ├── kctl_id
│ │ ├── mask_bits
│ │ ├── status
│ │ ├── sw_inject_enable
│ │ └── type
...
│ └── HDMI_DP_pcm_9_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── card1
├── HDMI_DP_pcm_5_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
...
├── Headphone_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── Headset_Mic_Jack
├── jackin_inject
├── kctl_id
├── mask_bits
├── status
├── sw_inject_enable
└── type
The nodes kctl_id, mask_bits, status and type are read-only, users
could check jack or jack_kctl's information through them.
The nodes sw_inject_enable and jackin_inject are directly used for
injection. The sw_inject_enable is read-write, users could check if
software injection is enabled or not on this jack, and users could
echo 1 or 0 to enable or disable software injection on this jack. Once
the injection is enabled, the jack will not change by hardware events
anymore, once the injection is disabled, the jack will restore the
last reported hardware events to the jack. The jackin_inject is
write-only, if the injection is enabled, users could echo 1 or 0 to
this node to inject plugin or plugout events to this jack.
For the detailed usage information on these nodes, please refer to
Documentation/sound/designs/jack-injection.rst.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Output loopback is a feature where you can record what you hear.
The HDSP series of the RME interfaces provides this functionality
at the hardware level and this patch exposes controls to enable or
disable it per output (playback) channel.
This probably works on other cards but due to a lack of hardware
it is only tested and enabled for the HDSP9632 card with this patch.
Should this patch be accepted a separate patch will be posted to
https://github.com/alsa-project/alsa-tools/tree/master/hdspmixer
which adds "LPBK" buttons to each output in the playback strip for
the user to be able to control this feature from the user land.
Users from Windows tool TotalMixFX should be familiar with this.
Signed-off-by: Jasmin Fazlic <superfassl@gmail.com>
Link: https://lore.kernel.org/r/95cb3117-e85a-51a6-c2ce-bf736e70fc4c@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When device_type == DEVICE_ALI, we should also check the return
value of pci_iomap() to avoid potential null pointer dereference.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210131100916.7915-1-dinghao.liu@zju.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The only usage of hdac_dev_attr_group is to put its address in an array
of pointers to const attribute_group structs. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210131001241.2278-3-rikard.falkeborn@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The only usage of ac97_adapter_attr_group is to put its address in an
array of pointers to const attribute_group structs. Make it const to
allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210131001241.2278-2-rikard.falkeborn@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
isa: Make the remove callback for isa drivers return void
Link: https://lore.kernel.org/r/20210122092449.426097-1-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of an unconditional return 0, return no value. One of the two
callers ignored the return value already before.
This simplifies the next patch.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20210122092449.426097-3-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If pcwd_isa_probe() succeeded pcwd_private.io_addr cannot be NULL. (And
if pcwd_isa_probe() failed, pcwd_isa_remove() isn't called.)
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-2-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The "chip" can't be NULL in hda_tegra_runtime_resume() because code would
crash otherwise. Let's remove the unnecessary check in order to clean up
code a tad.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Suggested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-4-digetx@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Reset hardware on RPM-resume in order to bring it into a predictable
state.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-3-digetx@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use clk_bulk helpers to make code cleaner. Note that this patch changed
the order in which clocks are enabled to make code look nicer, but this
doesn't matter in terms of hardware.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-2-digetx@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drivers in ALSA firewire stack supports eventing to userspace
applications via ALSA hwdep interface. All of the drivers supports stream
lock events. Some of them supports their unique events according to
specification of target device.
ALSA bebob driver supports the stream lock event only. In the case, it's
enough to check condition only in loop with process blocking. However,
current implementation check it again after breaking the loop.
This commit removes the redundant check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210125140208.26318-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Smatch complains that "count" is not clamped when "ff->dev_lock_changed"
and it leads to an information leak. Fortunately, that's not actually
possible and the condition can be deleted.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6n6I8EcNAO5ZFs@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Smatch complains that "count" isn't clamped properly and
"oxfw->dev_lock_changed" is false then it leads to an information
leak. But it turns out that "oxfw->dev_lock_changed" is always
set and the condition can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6ntkBxT/4DJ4YK@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix the following coccicheck warnings:
./sound/pci/hda/hda_intel.c:2309:3-23: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611559047-106928-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix the following coccicheck warnings:
./sound/pci/hda/patch_conexant.c:570:2-20: WARNING:
Assignment of 0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1610958469-65856-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
At probing a UAC2/UAC3 device like NUX MG-300 USB interface, we get
error messages "RANGE setting not yet supported". It comes the place
where the driver tries to determine the resolution of mixer volumes
via SET_CUR_RES and GET_CUR_RES verbs. Those verbs aren't supported
on UAC2 and UAC3, hence the driver warns like the above. Although the
driver handles this error and works as expected, it's still ugly to
show such errors unnecessarily.
This patch papers over the errors by applying the resolution detection
only for UAC1 and skipping it for UAC2/UAC3.
Reported-by: Mike Oliphant <oliphant@nostatic.org>
Link: https://lore.kernel.org/r/20210120213932.1971-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current USB-audio driver gets an error at probing NUX MG-300 about
parsing the clocks. This is because the firmware doesn't return the
proper connection of the clock selector that is connected to a single
clock; it's likely that the firmware was lazy^w optimized and the
inquiry wasn't handled. Actually it makes little sense to inquire and
set up the single connection explicitly.
This patch fixes the issue by simply skipping the clock selector
inquiry if it's a single connection.
Reported-by: Mike Oliphant <oliphant@nostatic.org>
Link: https://lore.kernel.org/r/20210120213932.1971-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This adds the Pioneer DJ DJM-750 to the quirks table and ensures
skip_pioneer_sync_ep() is (also) called: this device uses the vendor
ID of 0x08e4 (I'm not sure why they use multiple vendor IDs but many
just like to be awkward it seems).
Playback on all 8 channels works. I'll likely keep this working in the
future and submit futher patches and improvements as necessary.
Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210118130621.77miiie47wp7mump@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Back-merge of 5.11 devel branch for more works on USB-audio.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For addressing the regression on Pioneer devices, we recently
corrected the quirk code to enable the implicit feedback mode on those
devices properly. However, the devices still showed problems with the
full duplex operations with JACK, and after debug sessions, we figured
out that the older kernels that had worked with JACK also didn't use
the implicit feedback mode at all although they had the quirk code to
enable it; instead, the old code worked just to skip the normal sync
endpoint setup that would have been detected without it. IOW, what
broke without the implicit-fb quirk in the past was the application of
the normal sync endpoint that is actually the capture data endpoint on
these devices.
This patch covers the overseen piece: it modifies the quirk code again
not to enable the implicit feedback mode but just to make the driver
skipping the sync endpoint detection. This made the driver working
with JACK full-duplex mode again.
Still it's not quite clear why the implicit feedback doesn't work on
those devices yet; maybe it's about some issues in the URB setup. But
at least, with this patch, the driver should work in the level of the
older kernels again.
Fixes: 167c9dc84ec3 ("ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices")
Link: https://lore.kernel.org/r/20210118075816.25068-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The UAC2/3 sample rate setup is based on the clock node, which is
usually shared in the interface, and can't be re-setup without
deselecting the interface once, and that's how the current code
behaves. OTOH, the sample rate setup of UAC1 is per endpoint, hence
we basically need to call for each endpoint usage even if those share
the same interface.
This patch fixes the behavior of UAC1 to call always
snd_usb_init_sample_rate() in snd_usb_endpoint_configure().
Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/20210118075816.25068-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current sample rate setup function for UAC1 assumes only the first
endpoint retrieved from the interface:altset pair, but the rate set up
may be needed also for the secondary endpoint. Also, retrieving the
endpoint number from the interface descriptor is redundant; we have
already the target endpoint in the given audioformat object.
This patch simplifies the code and corrects the target endpoint as
described in the above. It simply refers to fmt->endpoint directly.
Also, this patch drops the pioneer_djm_set_format_quirk() that is
caleld from snd_usb_set_format_quirk(); this function does the sample
rate setup but for the capture endpoint (0x82), and that's exactly
what the change above fixes.
Link: https://lore.kernel.org/r/20210118075816.25068-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'CPU too large' error in Intel PT
- Correct event attribute sizes in 'perf inject'
- Sync build_bug.h and kvm.h kernel copies
- Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example
- libbpf tests fixes
- Fix shadow stat 'perf test' for non-bash shells
- Take cgroups into account for shadow stats in 'perf stat'
* tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf inject: Correct event attribute sizes
perf intel-pt: Fix 'CPU too large' error
perf stat: Take cgroups into account for shadow stats
perf stat: Introduce struct runtime_stat_data
libperf tests: Fail when failing to get a tracepoint id
libperf tests: If a test fails return non-zero
libperf tests: Avoid uninitialized variable warning
perf test: Fix shadow stat test for non-bash shells
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf bpf examples: Fix bpf.h header include directive in 5sec.c example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a lack of alignment in our linker script, that can lead to
crashes depending on configuration etc.
One fix for the 32-bit VDSO after the C VDSO conversion.
Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy"
* tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Fix clock_gettime_fallback for vdso32
powerpc: Fix alignment bug within the init sections
|
|
Pull misc vfs fixes from Al Viro:
"Several assorted fixes.
I still think that audit ->d_name race is better fixed this way for
the benefit of backports, with any possibly fancier variants done on
top of it"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
dump_common_audit_data(): fix racy accesses to ->d_name
iov_iter: fix the uaccess area in copy_compat_iovec_from_user
umount(2): move the flag validity checks first
|
|
So technically there is nothing wrong with adding a pinned page to the
swap cache, but the pinning obviously means that the page can't actually
be free'd right now anyway, so it's a bit pointless.
However, the real problem is not with it being a bit pointless: the real
issue is that after we've added it to the swap cache, we'll try to unmap
the page. That will succeed, because the code in mm/rmap.c doesn't know
or care about pinned pages.
Even the unmapping isn't fatal per se, since the page will stay around
in memory due to the pinning, and we do hold the connection to it using
the swap cache. But when we then touch it next and take a page fault,
the logic in do_swap_page() will map it back into the process as a
possibly read-only page, and we'll then break the page association on
the next COW fault.
Honestly, this issue could have been fixed in any of those other places:
(a) we could refuse to unmap a pinned page (which makes conceptual
sense), or (b) we could make sure to re-map a pinned page writably in
do_swap_page(), or (c) we could just make do_wp_page() not COW the
pinned page (which was what we historically did before that "mm:
do_wp_page() simplification" commit).
But while all of them are equally valid models for breaking this chain,
not putting pinned pages into the swap cache in the first place is the
simplest one by far.
It's also the safest one: the reason why do_wp_page() was changed in the
first place was that getting the "can I re-use this page" wrong is so
fraught with errors. If you do it wrong, you end up with an incorrectly
shared page.
As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or
do_swap_page() would be a serious bug since it is only a (very good)
heuristic. Re-using the page requires a hard black-and-white rule with
no room for ambiguity.
In contrast, saying "this page is very likely dma pinned, so let's not
add it to the swap cache and try to unmap it" is an obviously safe thing
to do, and if the heuristic might very rarely be a false positive, no
harm is done.
Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Reported-and-tested-by: Martin Raiber <martin@urbackup.org>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine minor fixes, seven in drivers and two in the core SCSI disk
driver (sd) which should be harmless involving removing an unused
variable and quietening a spurious warning"
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Remove obsolete variable in sd_remove()
scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
scsi: scsi_debug: Fix memleak in scsi_debug_init()
scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility"
scsi: qedi: Correct max length of CHAP secret
scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
scsi: ufs: Relocate flush of exceptional event
scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
scsi: ufs: Fix possible power drain during system suspend
|
|
We are not guaranteed the locking environment that would prevent
dentry getting renamed right under us. And it's possible for
old long name to be freed after rename, leading to UAF here.
Cc: stable@kernel.org # v2.6.2+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull block fixes from Jens Axboe:
"Just an nvme pull request via Christoph:
- don't initialize hwmon for discover controllers (Sagi Grimberg)
- fix iov_iter handling in nvme-tcp (Sagi Grimberg)
- fix a preempt warning in nvme-tcp (Sagi Grimberg)
- fix a possible NULL pointer dereference in nvme (Israel Rukshin)"
* tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
nvme: don't intialize hwmon for discovery controllers
nvme-tcp: fix possible data corruption with bio merges
nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT
nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
|
|
Pull io_uring fixes from Jens Axboe:
"We still have a pending fix for a cancelation issue, but it's still
being investigated. In the meantime:
- Dead mm handling fix (Pavel)
- SQPOLL setup error handling (Pavel)
- Flush timeout sequence fix (Marcelo)
- Missing finish_wait() for one exit case"
* tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()
io_uring: flush timeouts that should already have expired
io_uring: do sqo disable on install_fd error
io_uring: fix null-deref in io_disable_sqo_submit
io_uring: don't take files/mm for a dead task
io_uring: drop mm and files after task_work_run
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"There are a few more fixes than a normal rc4, largely due to the
bubble introduced by the holiday break:
- return -ENOSYS for syscall number -1, which previously returned an
uninitialized value.
- ensure of_clk_init() has been called in time_init(), without which
clock drivers may not be initialized.
- fix sifive,uart0 driver to properly display the baud rate. A fix to
initialize MPIE that allows interrupts to be processed during
system calls.
- avoid erronously begin tracing IRQs when interrupts are disabled,
which at least triggers suprious lockdep failures.
- workaround for a warning related to calling smp_processor_id()
while preemptible. The warning itself is suprious on currently
availiable systems.
- properly include the generic time VDSO calls. A fix to our kasan
address mapping. A fix to the HiFive Unleashed device tree, which
allows the Ethernet PHY to be properly initialized by Linux (as
opposed to relying on the bootloader).
- defconfig update to include SiFive's GPIO driver, which is present
on the HiFive Unleashed and necessary to initialize the PHY.
- avoid allocating memory while initializing reserved memory.
- avoid allocating the last 4K of memory, as pointers there alias
with syscall errors.
There are also two cleanups that should have no functional effect but
do fix build warnings:
- drop a duplicated definition of PAGE_KERNEL_EXEC.
- properly declare the asm register SP shim.
- cleanup the rv32 memory size Kconfig entry, to reflect the actual
size of memory availiable"
* tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix maximum allowed phsyical memory for RV32
RISC-V: Set current memblock limit
RISC-V: Do not allocate memblock while iterating reserved memblocks
riscv: stacktrace: Move register keyword to beginning of declaration
riscv: defconfig: enable gpio support for HiFive Unleashed
dts: phy: add GPIO number and active state used for phy reset
dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
riscv: Fix KASAN memory mapping.
riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
riscv: cacheinfo: Fix using smp_processor_id() in preemptible
riscv: Trace irq on only interrupt is enabled
riscv: Drop a duplicated PAGE_KERNEL_EXEC
riscv: Enable interrupts during syscalls with M-Mode
riscv: Fix sifive serial driver
riscv: Fix kernel time_init()
riscv: return -ENOSYS for syscall -1
|
|
Turning a pinned page read-only breaks the pinning after COW. Don't do it.
The whole "track page soft dirty" state doesn't work with pinned pages
anyway, since the page might be dirtied by the pinning entity without
ever being noticed in the page tables.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Turning page table entries read-only requires the mmap_sem held for
writing.
So stop doing the odd games with turning things from read locks to write
locks and back. Just get the write lock.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.
Fix this issue by limiting the memblock if available memory spans the
entire address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, resource tree allocates memory blocks while iterating on the
list. It leads to following kernel warning because memblock allocation
also invokes memory block reservation API.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795
__insert_resource+0x8e/0xd0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.10.0-00022-ge20097fb37e2-dirty #549
[ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50
[ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20
[ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60
[ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4
[ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000
[ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600
[ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80
[ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c
[ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40
[ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff
This is also unnecessary as we can pre-compute the total memblocks required
for each memory region and allocate it before the loop. It save precious
boot time not going through memblock allocation code every time.
Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree")
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
sizeof needs to be called on the compat pointer, not the native one.
Fixes: 89cd35c58bc2 ("iov_iter: transparently handle compat iovecs in import_iovec")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM-raid's raid1 discard limits so discards work.
- Select missing Kconfig dependencies for DM integrity and zoned
targets.
- Four fixes for DM crypt target's support to optionally bypass kcryptd
workqueues.
- Fix DM snapshot merge supports missing data flushes before committing
metadata.
- Fix DM integrity data device flushing when external metadata is used.
- Fix DM integrity's maximum number of supported constructor arguments
that user can request when creating an integrity device.
- Eliminate DM core ioctl logging noise when an ioctl is issued without
required CAP_SYS_RAWIO permission.
* tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: defer decryption to a tasklet if interrupts disabled
dm integrity: fix the maximum number of arguments
dm crypt: do not call bio_endio() from the dm-crypt tasklet
dm integrity: fix flush with external metadata device
dm: eliminate potential source of excessive kernel log noise
dm snapshot: flush merged data before committing metadata
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
dm crypt: do not wait for backlogged crypto request completion in softirq
dm zoned: select CONFIG_CRC32
dm integrity: select CRYPTO_SKCIPHER
dm raid: fix discard limits for raid1
|
|
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: MAINTAINERS and mm (slub,
pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure,
and process_vm_access)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/process_vm_access.c: include compat.h
mm,hwpoison: fix printing of page flags
MAINTAINERS: add Vlastimil as slab allocators maintainer
mm/hugetlb: fix potential missing huge page size info
mm: migrate: initialize err in do_migrate_pages
mm/vmalloc.c: fix potential memory leak
arm/kasan: fix the array size of kasan_early_shadow_pte[]
mm/memcontrol: fix warning in mem_cgroup_page_lruvec()
mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
mm, slub: consider rest of partial list if acquire_slab() fails
|
|
Pull rdma fixes from Jason Gunthorpe:
"A fairly modest set of bug fixes, nothing abnormal from the merge
window
The ucma patch is a bit on the larger side, but given the regression
was recently added I've opted to forward it to the rc stream.
- Fix a ucma memory leak introduced in v5.9 while fixing the
Syzkaller bugs
- Don't fail when the xarray wraps for user verbs objects
- User triggerable oops regression from the umem page size rework
- Error unwind bugs in usnic, ocrdma, mlx5 and cma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cma: Fix error flow in default_roce_mode_store
RDMA/mlx5: Fix wrong free of blue flame register on error
IB/mlx5: Fix error unwinding when set_has_smi_cap fails
RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two()
RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()
RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp
RDMA/restrack: Don't treat as an error allocation ID wrapping
RDMA/ucma: Do not miss ctx destruction steps in some cases
|
|
If we enter with requests pending and performm cancelations, we'll have
a different inflight count before and after calling prepare_to_wait().
This causes the loop to restart. If we actually ended up canceling
everything, or everything completed in-between, then we'll break out
of the loop without calling finish_wait() on the waitqueue. This can
trigger a warning on exit_signals(), as we leave the task state in
TASK_UNINTERRUPTIBLE.
Put a finish_wait() after the loop to catch that case.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A number of bug fixes for ext4:
- Fix for the new fast_commit feature
- Fix some error handling codepaths in whiteout handling and
mountpoint sampling
- Fix how we write ext4_error information so it goes through the
journal when journalling is active, to avoid races that can lead to
lost error information, superblock checksum failures, or DIF/DIX
features"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove expensive flush on fast commit
ext4: fix bug for rename with RENAME_WHITEOUT
ext4: fix wrong list_splice in ext4_fc_cleanup
ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR
ext4: don't leak old mountpoint samples
ext4: drop ext4_handle_dirty_super()
ext4: fix superblock checksum failure when setting password salt
ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super()
ext4: save error info to sb through journal if available
ext4: protect superblock modifications with a buffer lock
ext4: drop sync argument of ext4_commit_super()
ext4: combine ext4_handle_error() and save_error_info()
|
|
Pull cifs fixes from Steve French:
"Two small cifs fixes for stable (including an important handle leak
fix) and three small cleanup patches"
* tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: style: replace one-element array with flexible-array
cifs: connect: style: Simplify bool comparison
fs: cifs: remove unneeded variable in smb3_fs_context_dup
cifs: fix interrupted close commands
cifs: check pointer before freeing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix coredumps on 64bit kernels
- fix for alignment bugs preventing booting
- fix checking for failed irq_alloc_desc calls
* tag 'mips_fixes_5.11.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: OCTEON: fix unreachable code in octeon_irq_init_ciu
MIPS: relocatable: fix possible boot hangup with KASLR enabled
MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps
MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB
|
|
When 'perf inject' reads a perf.data file from an older version of perf,
it writes event attributes into the output with the original size field,
but lays them out as if they had the size currently used. Readers see a
corrupt file. Update the size field to match the layout.
Signed-off-by: Al Grant <al.grant@foss.arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201124195818.30603-1-al.grant@arm.com
Signed-off-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:
Example on system with 8 cpus:
Before:
# echo 0 > /sys/devices/system/cpu/cpu2/online
# ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.147 MB perf.data ]
# ./perf script --itrace=e
Requested CPU 7 too large. Consider raising MAX_NR_CPUS
0x25908 [0x8]: failed to process type: 68 [Invalid argument]
After:
# ./perf script --itrace=e
#
Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
