summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-11-14eth: fbnic: Add support to dump registersMohsin Bashir
Add support for the 'ethtool -d <dev>' command to retrieve and print a register dump for fbnic. The dump defaults to version 1 and consists of two parts: all the register sections that can be dumped linearly, and an RPC RAM section that is structured in an interleaved fashion and requires special handling. For each register section, the dump also contains the start and end boundary information which can simplify parsing. Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://patch.msgid.link/20241112222605.3303211-1-mohsin.bashr@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-13Merge branch 'net-dsa-microchip-add-lan9646-switch-support'Jakub Kicinski
Tristram Ha says: ==================== net: dsa: microchip: Add LAN9646 switch support This series of patches is to add LAN9646 switch support to the KSZ DSA driver. ==================== Link: https://patch.msgid.link/20241109015705.82685-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: dsa: microchip: Add LAN9646 switch support to KSZ DSA driverTristram Ha
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has 4 internal PHYs and 1 SGMII port. The chip id read from hardware is same as KSZ9477, so software driver needs to create a new chip id and group allowable functions under its chip data structure to differentiate the product. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Link: https://patch.msgid.link/20241109015705.82685-3-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13dt-bindings: net: dsa: microchip: Add LAN9646 switch supportTristram Ha
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has 4 internal PHYs and 1 SGMII port. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241109015705.82685-2-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13Merge branch 'support-external-snapshots-on-dwmac1000'Jakub Kicinski
Maxime Chevallier says: ==================== Support external snapshots on dwmac1000 The main change since v3 is the move of the fifo flush wait in the ptp_clock_info enable() function within the mutex that protects the ptp registers. Thanks Jakub and Paolo for spotting this. This series also aggregates Daniel's reviews, except for the patch 4 which was modified since then. This series is another take on the previous work [1] done by Alexis Lothoré, that fixes the support for external snapshots timestamping in GMAC3-based devices. Details on why this is needed are mentionned on the cover [2] from V1. [1]: https://lore.kernel.org/netdev/20230616100409.164583-1-alexis.lothore@bootlin.com/ [2]: https://lore.kernel.org/netdev/20241029115419.1160201-1-maxime.chevallier@bootlin.com/ Link to V1: https://lore.kernel.org/netdev/20241029115419.1160201-1-maxime.chevallier@bootlin.com/ Link to V2: https://lore.kernel.org/netdev/20241104170251.2202270-1-maxime.chevallier@bootlin.com/ Link to V3: https://lore.kernel.org/netdev/20241106090331.56519-1-maxime.chevallier@bootlin.com/ ==================== Link: https://patch.msgid.link/20241112170658.2388529-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: dwmac_socfpga: This platform has GMACMaxime Chevallier
Indicate that dwmac_socfpga has a gmac. This will make sure that gmac-specific interrupt processing is done, including timestamp interrupt handling. Without this, the external snapshot interrupt is never ack'd and we have an interrupt storm on external snapshot event. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-10-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Configure only the relevant bits for timestamping setupMaxime Chevallier
The PTP_TCR (Timestamp Control Register) is used to configure several features related to packet timestamping. On one hand, it configures the 1588 packet processing, to indicate what types of frames should be timestamped (all, only 1588v1 or 1588v2, using L2 or L4 timestamping, on IPv4 or IPv6, etc.). This is congfigured usually through the ioctl / ndo dedicated for such setup. This configuration is done by setting some fields in that register, that seem to behave the same way on all dwmac variants, including DWMAC1000. On the other hand, and only on DWMAC1000 apparently, some fields in that register are used to configure external snapshots (bits 24/25). On DWMAC4 and others, these fields are reserved and external snapshots are configured through a dedicated register that simply doesn't seem to exist on DWMAC1000. This configuration is done in the dwmac1000-specific ptp_clock_info ops (cf dwmac1000_ptp_enable()). So to avoid the timestamping configuration interfering with the external snapshots, this commit makes sure that the config_hw_tstamping only configures the relevant bits in PTP_TCR, so that the DWMAC1000 timestamping can correctly rely on these otherwise reserved fields. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-9-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Don't include dwmac4 definitions in stmmac_ptpMaxime Chevallier
The stmmac_ptp code doesn't need the dwmac4 register definitions, remove the inclusion. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-8-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Enable timestamping interrupt on dwmac1000Maxime Chevallier
The default configuration for the interrupts on dwmac1000 have the timestamping interrupt masked. Now that the timestamping has been adapted to dwmac1000, enable the timestamping interrupt on these platforms. On dwmac1000, the external snapshot interrupt is configured through a dedicated bit, that is set as reserved on other dwmac variants. The timestaming interrupt is acknowledged by reading the GMAC3_X_TIMESTAMP_STATUS register. Make sure that this interrupt is enabled when snapshot is enabled, and masked when disabled. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-7-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Introduce dwmac1000 timestamping operationsMaxime Chevallier
In GMAC3_X, the timestamping configuration differs from GMAC4 in the layout of the registers accessed to grab the number of snapshots in FIFO as well as the register offset to grab the aux snapshot timestamp. Introduce dedicated ops to configure timestamping on dwmac100 and dwmac1000. The latency correction doesn't seem to exist on GMAC3, so its corresponding operation isn't populated. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-6-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Introduce dwmac1000 ptp_clock_info and operationsMaxime Chevallier
The PTP configuration for GMAC3_X differs from the other implementations in several ways : - There's only one external snapshot trigger - The snapshot configuration is done through the PTP_TCR register, whereas the other dwmac variants have a dedicated ACR (auxiliary control reg) for that purpose - The layout for the PTP_TCR register also differs, as bits 24/25 are used for the snapshot configuration. These bits are reserved on other variants. On GMAC3_X, we also can't discover the number of snapshot triggers automatically. The GMAC3_X has one PPS output, however it's configuration isn't supported yet so report 0 n_per_out for now. Introduce a dedicated set of ptp_clock_info ops and configuration parameters to reflect these differences specific to GMAC3_X. This was tested on dwmac_socfpga. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-5-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Only update the auto-discovered PTP clock featuresMaxime Chevallier
Some DWMAC variants such as dwmac1000 don't support discovering the number of output pps and auxiliary snapshots. Allow these parameters to be defined in default ptp_clock_info, and let them be updated only when the feature discovery yielded a result. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-4-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Use per-hw ptp clock opsMaxime Chevallier
The auxiliary snapshot configuration was found to differ depending on the dwmac version. To prepare supporting this, allow specifying the ptp_clock_info ops in the hwif array Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: stmmac: Don't modify the global ptp ops directlyMaxime Chevallier
The stmmac_ptp_clock_ops are copied into the stmmac_priv structure before being registered to the PTP core. Some adjustments are made prior to that, such as the number of snapshots or max adjustment parameters. Instead of modifying the global definition, then copying into the local private data, let's first copy then modify the local parameters. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241112170658.2388529-2-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: phy: c45: don't use temporary linkmode bitmaps in ↵Heiner Kallweit
genphy_c45_ethtool_get_eee genphy_c45_eee_is_active() populates both bitmaps only if it returns successfully. So we can avoid the overhead of the temporary bitmaps. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/b0832102-28ab-4223-b879-91fb1fc11278@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13net: simplify eeecfg_mac_can_tx_lpiHeiner Kallweit
Simplify the function. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/f9a4623b-b94c-466c-8733-62057c6d9a17@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13ynl: samples: Fix the wrong format specifierLuo Yifan
Make a minor change to eliminate a static checker warning. The type of s->ifc is unsigned int, so the correct format specifier should be %u instead of %d. Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241113011142.290474-1-luoyifan@cmss.chinamobile.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13Merge branch 'tools-ynl-two-patches-to-ease-building-with-rpmbuild'Jakub Kicinski
Jan Stancek says: ==================== tools: ynl: two patches to ease building with rpmbuild I'm looking to build and package ynl for Fedora and Centos Stream users. Default rpmbuild has couple hardening options enabled by default [1][2], which currently prevent ynl from building. This series contains 2 small patches to address it. [1] https://fedoraproject.org/wiki/Changes/Harden_All_Packages [2] https://fedoraproject.org/wiki/Changes/PythonSafePath ==================== Link: https://patch.msgid.link/cover.1731399562.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13tools: ynl: extend CFLAGS to keep options from environmentJan Stancek
Package build environments like Fedora rpmbuild introduced hardening options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS and LDFLAGS. ynl Makefiles currently override CFLAGS but not LDFLAGS, which leads to a mismatch and build failure: CC sample devlink /usr/bin/ld: devlink.o: relocation R_X86_64_32 against symbol `ynl_devlink_family' can not be used when making a PIE object; recompile with -fPIE /usr/bin/ld: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Extend CFLAGS to support hardening options set by build environment. Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/265b2d5d3a6d4721a161219f081058ed47dc846a.1731399562.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13tools: ynl: add script dir to sys.pathJan Stancek
Python options like PYTHONSAFEPATH or -P [1] do not add script directory to PYTHONPATH. ynl depends on this path to build and run. [1] This option is default for Fedora rpmbuild since introduction of https://fedoraproject.org/wiki/Changes/PythonSafePath Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/b26537cdb6e1b24435b50b2ef81d71f31c630bc1.1731399562.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13Merge tag 'wireless-next-2024-11-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13Merge branch 'phy-mediatek-reorg'David S. Miller
Sky Huang says: ==================== Re-organize MediaTek ethernet phy drivers and propose mtk-phy-lib This patchset comes from patch 1/9, 3/9, 4/9, 5/9 and 7/9 of: https://lore.kernel.org/netdev/20241004102413.5838-1-SkyLake.Huang@mediatek.com/ This patchset changes MediaTek's ethernet phy's folder structure and integrates helper functions, including LED & token ring manipulation, into mtk-phy-lib. --- Change in v2: - Add correct Reviewed-by tag in each patch. Change in v3: [patch 4/5] - Fix kernel test robot error by adding missing MTK_NET_PHYLIB. ==================== Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
2024-11-13net: phy: mediatek: add MT7530 & MT7531's PHY ID macrosSkyLake.Huang
This patch adds MT7530 & MT7531's PHY ID macros in mtk-ge.c so that it follows the same rule of mtk-ge-soc.c. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13net: phy: mediatek: Integrate read/write page helper functionsSkyLake.Huang
This patch integrates read/write page helper functions as MTK phy lib. They are basically the same in mtk-ge.c & mtk-ge-soc.c. Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13net: phy: mediatek: Improve readability of mtk-phy-lib.c's ↵SkyLake.Huang
mtk_phy_led_hw_ctrl_set() This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in mtk_phy_led_hw_ctrl_set(), which improves readability. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13net: phy: mediatek: Move LED helper functions into mtk phy libSkyLake.Huang
This patch creates mtk-phy-lib.c & mtk-phy.h and integrates mtk-ge-soc.c's LED helper functions so that we can use those helper functions in other MTK's ethernet phy driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13net: phy: mediatek: Re-organize MediaTek ethernet phy driversSkyLake.Huang
Re-organize MediaTek ethernet phy driver files and get ready to integrate some common functions and add new 2.5G phy driver. mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988 mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988 Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13Merge branch 'octeontx2-rvu-rep'David S. Miller
Geetha sowjanya says: ==================== Introduce RVU representors This series adds representor support for each rvu devices. When switchdev mode is enabled, representor netdev is registered for each rvu device. In implementation of representor model, one NIX HW LF with multiple SQ and RQ is reserved, where each RQ and SQ of the LF are mapped to a representor. A loopback channel is reserved to support packet path between representors and VFs. CN10K silicon supports 2 types of MACs, RPM and SDP. This patch set adds representor support for both RPM and SDP MAC interfaces. - Patch 1: Implements basic representor driver. - Patch 2: Add devlink support to create representor netdevs that can be used to manage VFs. - Patch 3: Implements basec netdev_ndo_ops. - Patch 4: Installs tcam rules to route packets between representor and VFs. - Patch 5: Enables fetching VF stats via representor interface - Patch 6: Adds support to sync link state between representors and VFs . - Patch 7: Enables configuring VF MTU via representor netdevs. - Patch 8: Adds representors for sdp MAC. - Patch 9: Adds devlink port support. - Patch 10: Implements offload stats. - Patch 11: Implements tc offload support. - patch 12: Adds documentation for rvu port representor. pci/0002:1c:00.0 Command to create PF/VF representor Rpf1vf0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether f6:43:83:ee:26:21 brd ff:ff:ff:ff:ff:ff Rpf1vf1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 12:b2:54:0e:24:54 brd ff:ff:ff:ff:ff:ff Rpf1vf2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 4a:12:c4:4c:32:62 brd ff:ff:ff:ff:ff:ff Rpf1vf3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether ca:cb:68:0e:e2:6e brd ff:ff:ff:ff:ff:ff Rpf2vf0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 06:cc:ad:b4:f0:93 brd ff:ff:ff:ff:ff:ff ~# devlink port pci/0002:1c:00.0/0: type eth netdev Rpf1vf0 flavour physical port 0 splittable false pci/0002:1c:00.0/1: type eth netdev Rpf1vf1 flavour pcivf controller 0 pfnum 1 vfnum 1 external false splittable false pci/0002:1c:00.0/2: type eth netdev Rpf1vf2 flavour pcivf controller 0 pfnum 1 vfnum 2 external false splittable false pci/0002:1c:00.0/3: type eth netdev Rpf1vf3 flavour pcivf controller 0 pfnum 1 vfnum 3 external false splittable false ----------- v11:v1: - Submitted refactoring changes as a separate patch set. https://lore.kernel.org/netdev/20241023161843.15543-1-gakula@marvell.com/T/ - Moved documentation to a separate patch. - patch 9: Added code changes to forward updated mac address to VF. - Implemented TC offload support. v10-v11: - As suggested by "Jiri Pirko" adjusted the documentation. - Added more commit description to patch1. v9-v10: - Fixed build warning w.r.t documentation. v8-v9: - Updated the documentation. v7-v8: - Implemented offload stats ndo. - Added documentation. v6-v7: - Rebased on top net-next branch. v5-v6: - Addressed review comments provided by "Simon Horman". - Added review tag. v4-v5: - Patch 3: Removed devm_* usage in rvu_rep_create() - Patch 3: Fixed build warnings. v3-v4: - Patch 2 & 3: Fixed coccinelle reported warnings. - Patch 10: Added devlink port support. v2-v3: - Used extack for error messages. - As suggested reworked commit messages. - Fixed sparse warning. v1-v2: -Fixed build warnings. -Address review comments provided by "Kalesh Anakkur Purayil". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13Documentation: octeontx2: Add Documentation for RVU representorsGeetha sowjanya
Adds documentation for creating and configuring rvu port representors Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Adds TC offload supportGeetha sowjanya
Implements tc offload support for rvu representors. Usage example: - Add tc rule to drop packets with vlan id 3 using port representor(Rpf1vf0). # tc filter add dev Rpf1vf0 protocol 802.1Q parent ffff: flower vlan_id 3 vlan_ethtype ipv4 skip_sw action drop - Redirect packets with vlan id 5 and IPv4 packets to eth1, after stripping vlan header. # tc filter add dev Rpf1vf0 ingress protocol 802.1Q flower vlan_id 5 vlan_ethtype ipv4 skip_sw action vlan pop action mirred ingress redirect dev eth1 Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Implement offload stats ndo for representorsGeetha sowjanya
Implement the offload stat ndo by fetching the HW stats of rx/tx queues attached to the representor. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Add devlink port supportGeetha sowjanya
Register devlink port for the rvu representors. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Add representors for sdp MACGeetha sowjanya
Hardware supports different types of MACs eg RPM, SDP, LBK. LBK is for internal Tx->Rx HW loopback path. RPM and SDP MACs support ingress/egress pkt IO on interfaces with different set of capabilities like interface modes. At the time of netdev driver registration PF will seek MAC related information from Admin function driver 'drivers/net/ethernet/marvell/octeontx2/af' and sets up ingress/egress queues etc such that pkt IO on the channels of these different MACs is possible. This patch add representors for SDP MAC. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Configure VF mtu via representorGeetha sowjanya
Adds support to manage the mtu configuration for VF through representor. On update of representor mtu a mbox notification is send to VF to update its mtu. This feature is implemented based on the "Network Function Representors" kernel documentation. " Setting an MTU on the representor should cause that same MTU to be reported to the representee. " Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Add support to sync link state between representor and VFsGeetha sowjanya
Implements the below requirement mentioned in the representors documentation. " The representee's link state is controlled through the representor. Setting the representor administratively UP or DOWN should cause carrier ON or OFF at the representee. " This patch enables - Reflecting the link state of representor based on the VF state and link state of VF based on representor. - On VF interface up/down a notification is sent via mbox to representor to update the link state. eg: ip link set eth0 up/down will disable carrier on/off of the corresponding representor(r0p1) interface. - On representor interface up/down will cause the link state update of VF. eg: ip link set r0p1 up/down will disable carrier on/off of the corresponding representee(eth0) interface. Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Get VF stats via representorGeetha sowjanya
Adds support to export VF port statistics via representor netdev. Defines new mbox "NIX_LF_STATS" to fetch VF hw stats. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-af: Add packet path between representor and VFGeetha sowjanya
Current HW, do not support in-built switch which will forward pkts between representee and representor. When representor is put under a bridge and pkts needs to be sent to representee, then pkts from representor are sent on a HW internal loopback channel, which again will be punted to ingress pkt parser. Now the rules that this patch installs are the MCAM filters/rules which will match against these pkts and forward them to representee. The rules that this patch installs are for basic representor <=> representee path similar to Tun/TAP between VM and Host. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Add basic net_device_opsGeetha sowjanya
Implements basic set of net_device_ops. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Create representor netdevGeetha sowjanya
Adds initial devlink support to set/get the switchdev mode. Representor netdevs are created for each rvu devices when the switch mode is set to 'switchdev'. These netdevs are be used to control and configure VFs. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: RVU representor driverGeetha sowjanya
Adds basic driver for the RVU representor. Driver on probe does pci specific initialization and does hw resources configuration. Introduces RVU_ESWITCH kernel config to enable/disable the driver. Representor and NIC shares the code but representors netdev support subset of NIC functionality. Hence "otx2_rep_dev" API helps to skip the features initialization that are not supported by the representors. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-12net: page_pool: do not count normal frag allocation in statsJakub Kicinski
Commit 0f6deac3a079 ("net: page_pool: add page allocation stats for two fast page allocate path") added increments for "fast path" allocation to page frag alloc. It mentions performance degradation analysis but the details are unclear. Could be that the author was simply surprised by the alloc stats not matching packet count. In my experience the key metric for page pool is the recycling rate. Page return stats, however, count returned _pages_ not frags. This makes it impossible to calculate recycling rate for drivers using the frag API. Here is example output of the page-pool YNL sample for a driver allocating 1200B frags (4k pages) with nearly perfect recycling: $ ./page-pool eth0[2] page pools: 32 (zombies: 0) refs: 291648 bytes: 1194590208 (refs: 0 bytes: 0) recycling: 33.3% (alloc: 4557:2256365862 recycle: 200476245:551541893) The recycling rate is reported as 33.3% because we give out 4096 // 1200 = 3 frags for every recycled page. Effectively revert the aforementioned commit. This also aligns with the stats we would see for drivers which do the fragmentation themselves, although that's not a strong reason in itself. On the (very unlikely) path where we can reuse the current page let's bump the "cached" stat. The fact that we don't put the page in the cache is just an optimization. Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://patch.msgid.link/20241109023303.3366500-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12eth: bnxt: use page pool for head fragsJakub Kicinski
Testing small size RPCs (300B-400B) on a large AMD system suggests that page pool recycling is very useful even for just the head frags. With this patch (and copy break disabled) I see a 30% performance improvement (82Gbps -> 106Gbps). Convert bnxt from normal page frags to page pool frags for head buffers. On systems with small page size we can use the same pool as for TPA pages. On systems with large pages the frag allocation logic of the page pool is already used to split a large page into TPA chunks. TPA chunks are much larger than heads (8k or 64k, AFAICT vs 1kB) and we always allocate the same sized chunks. Mixing allocation of TPA and head pages would lead to sub-optimal memory use. Plus Taehee's work on zero-copy / devmem will need to differentiate between TPA and non-TPA page pool, anyway. Conditionally allocate a new page pool for heads. Link: https://patch.msgid.link/20241109035119.3391864-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12dsa: qca8k: Use nested lock to avoid splatAndrew Lunn
qca8k_phy_eth_command() is used to probe the child MDIO bus while the parent MDIO is locked. This causes lockdep splat, reporting a possible deadlock. It is not an actually deadlock, because different locks are used. By making use of mutex_lock_nested() we can avoid this false positive. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241110175955.3053664-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12mptcp: fix possible integer overflow in mptcp_reset_tout_timerDmitry Kandybka
In 'mptcp_reset_tout_timer', promote 'probe_timestamp' to unsigned long to avoid possible integer overflow. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com> Link: https://patch.msgid.link/20241107103657.1560536-1-d.kandybka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12Revert "wifi: iwlegacy: do not skip frames with bad FCS"Kalle Valo
This reverts commit 02b682d54598f61cbb7dbb14d98ec1801112b878. Alf reports that this commit causes the connection to eventually die on iwl4965. The reason is that rx_status.flag is zeroed after RX_FLAG_FAILED_FCS_CRC is set and mac80211 doesn't know the received frame is corrupted. Fixes: 02b682d54598 ("wifi: iwlegacy: do not skip frames with bad FCS") Reported-by: Alf Marius <post@alfmarius.net> Closes: https://lore.kernel.org/r/60f752e8-787e-44a8-92ae-48bdfc9b43e7@app.fastmail.com/ Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241112142419.1023743-1-kvalo@kernel.org
2024-11-12wifi: mac80211: pass MBSSID config by referenceJohannes Berg
It's inefficient and confusing to pass the MBSSID config by value, requiring the whole struct to be copied. Pass it by reference instead. Link: https://patch.msgid.link/20241108092227.48fbd8a00112.I64abc1296a7557aadf798d88db931024486ab3b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-12wifi: mac80211: Support EHT 1024 aggregation size in TXMeiChia Chiu
Support EHT 1024 aggregation size in TX The 1024 agg size for RX is supported but not for TX. This patch adds this support and refactors common parsing logics for addbaext in both process_addba_resp and process_addba_req into a function. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Money Wang <money.wang@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://patch.msgid.link/20241112083846.32063-1-MeiChia.Chiu@mediatek.com [pass elems/len instead of mgmt/len/is_req] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-12net: rfkill: gpio: Add check for clk_enable()Mingwei Zheng
Add check for the return value of clk_enable() to catch the potential error. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Mingwei Zheng <zmw12306@gmail.com> Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Link: https://patch.msgid.link/20241108195341.1853080-1-zmw12306@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-12net: sched: cls_api: improve the error message for ID allocation failureJakub Kicinski
We run into an exhaustion problem with the kernel-allocated filter IDs. Our allocation problem can be fixed on the user space side, but the error message in this case was quite misleading: "Filter with specified priority/protocol not found" (EINVAL) Specifically when we can't allocate a _new_ ID because filter with lowest ID already _exists_, saying "filter not found", is confusing. Kernel allocates IDs in range of 0xc0000 -> 0x8000, giving out ID one lower than lowest existing in that range. The error message makes sense when tcf_chain_tp_find() gets called for GET and DEL but for NEW we need to provide more specific error messages for all three cases: - user wants the ID to be auto-allocated but filter with ID 0x8000 already exists - filter already exists and can be replaced, but user asked for a protocol change - filter doesn't exist Caller of tcf_chain_tp_insert_unique() doesn't set extack today, so don't bother plumbing it in. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20241108010254.2995438-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-12net: Implement fault injection forcing skb reallocationBreno Leitao
Introduce a fault injection mechanism to force skb reallocation. The primary goal is to catch bugs related to pointer invalidation after potential skb reallocation. The fault injection mechanism aims to identify scenarios where callers retain pointers to various headers in the skb but fail to reload these pointers after calling a function that may reallocate the data. This type of bug can lead to memory corruption or crashes if the old, now-invalid pointers are used. By forcing reallocation through fault injection, we can stress-test code paths and ensure proper pointer management after potential skb reallocations. Add a hook for fault injection in the following functions: * pskb_trim_rcsum() * pskb_may_pull_reason() * pskb_trim() As the other fault injection mechanism, protect it under a debug Kconfig called CONFIG_FAIL_SKB_REALLOC. This patch was *heavily* inspired by Jakub's proposal from: https://lore.kernel.org/all/20240719174140.47a868e6@kernel.org/ CC: Akinobu Mita <akinobu.mita@gmail.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20241107-fault_v6-v6-1-1b82cb6ecacd@debian.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-06-11 04:28:09 +0000