| Age | Commit message (Collapse) | Author |
|---|
|
The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.
[ 489.885525] Call Trace:
[ 489.885525] <TASK>
[ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm]
[ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu]
[ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0
[ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 489.886132] ? __pm_runtime_resume+0x60/0x90
[ 489.886134] pci_device_remove+0x3e/0xb0
[ 489.886135] __device_release_driver+0x1ab/0x2a0
[ 489.886137] driver_detach+0xf3/0x140
[ 489.886138] bus_remove_driver+0x6c/0xf0
[ 489.886140] driver_unregister+0x31/0x60
[ 489.886141] pci_unregister_driver+0x40/0x90
[ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu]
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
‘ring’ set but not used [-Werror=unused-but-set-variable]
81 | struct amdgpu_ring *ring;
| ^~~~
ring is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
[How]
Defer the initialization of num_types to eliminate the error logs.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This will let us pass the kms_hdr.bpc_switch IGT
test.
The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.
Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")
This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.
v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
variable
Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Increase COMMAND_LINE_SIZE as the current default value is too low
for syzbot kernel command line.
There has been considerable discussion on this patch that has led to a
larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all
ports. That's not quite done yet, but it's gotten far enough we're
confident this is not a uABI change so this is safe.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr
[Palmer: it's not uabi]
Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When __cifs_readv() and __cifs_writev() extract pages from a user-backed
iterator into a BVEC-type iterator, they set ->bv_need_unpin to note
whether they need to unpin the pages later. However, in both cases they
examine the BVEC-type iterator and not the source iterator - and so
bv_need_unpin doesn't get set and the pages are leaked.
I think this may be responsible for the generic/208 xfstest failing
occasionally with:
WARNING: CPU: 0 PID: 3064 at mm/gup.c:218 try_grab_page+0x65/0x100
RIP: 0010:try_grab_page+0x65/0x100
follow_page_pte+0x1a7/0x570
__get_user_pages+0x1a2/0x650
__gup_longterm_locked+0xdc/0xb50
internal_get_user_pages_fast+0x17f/0x310
pin_user_pages_fast+0x46/0x60
iov_iter_extract_pages+0xc9/0x510
? __kmalloc_large_node+0xb1/0x120
? __kmalloc_node+0xbe/0x130
netfs_extract_user_iter+0xbf/0x200 [netfs]
__cifs_writev+0x150/0x330 [cifs]
vfs_write+0x2a8/0x3c0
ksys_pwrite64+0x65/0xa0
with the page refcount going negative. This is less unlikely than it seems
because the page is being pinned, not simply got, and so the refcount
increased by 1024 each time, and so only needs to be called around ~2097152
for the refcount to go negative.
Further, the test program (aio-dio-invalidate-failure) uses a 32MiB static
buffer and all the PTEs covering it refer to the same page because it's
never written to.
The warning in try_grab_page():
if (WARN_ON_ONCE(folio_ref_count(folio) <= 0))
return -ENOMEM;
then trips and prevents us ever using the page again for DIO at least.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Link: https://lore.kernel.org/r/CAH2r5mvaTsJ---n=265a4zqRA7pP+o4MJ36WCQUS6oPrOij8cw@mail.gmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in cifs_reconnect_tcon(). It
is set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.
Create a new cifs_wait_for_server_reconnect() helper that can be used
by both SMB2+ and CIFS reconnect code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Do not map STATUS_OBJECT_NAME_INVALID to -EREMOTE under non-DFS
shares, or 'nodfs' mounts or CONFIG_CIFS_DFS_UPCALL=n builds.
Otherwise, in the slow path, get a referral to figure out whether it
is an actual DFS link.
This could be simply reproduced under a non-DFS share by running the
following
$ mount.cifs //srv/share /mnt -o ...
$ cat /mnt/$(printf '\U110000')
cat: '/mnt/'$'\364\220\200\200': Object is remote
Fixes: c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests")
CC: stable@vger.kernel.org # 6.2
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix the loop check in netfs_extract_user_to_sg() for extraction from
user-backed iterators to do the body if npages > 0, not if npages < 0
(which it can never be).
This isn't currently used by cifs, which only ever extracts data from BVEC,
KVEC and XARRAY iterators at this level, user-backed iterators having being
decanted into BVEC iterators at a higher level to accommodate the work
being done in a kernel thread.
Found by smatch:
fs/netfs/iterator.c:139 netfs_extract_user_to_sg() warn: unsigned 'npages' is never less than zero.
Fixes: 018584697533 ("netfs: Add a function to extract an iterator into a scatterlist")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302261115.P3TQi1ZO-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y/yYnAhoAYDBKixX@kili
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_write_back_from_locked_folio() should return the number of bytes read,
but returns the result of ->async_writev(), which will be 0 on success. As
it happens, this doesn't prevent cifs_writepages_region() from working as
it will then examine and ignore the pages that are no longer dirty rather
than just skipping over them.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We have two pieces of code that does pretty much the same
comparison. This change reuses cifs_match_ipaddr within
match_address.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
match_address function matches the scope id for ipv6 addresses,
but cifs_match_ipaddr (which is another function used for comparison)
does not use scope id. Doing so with this change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix an uninitialised variable introduced in cifs.
Fixes: 3d78fe73fa12 ("cifs: Build the RDMA SGE list directly from an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-rdma@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The xas_for_each loops added into fs/cifs/file.c need to go round again if
indicated by xas_retry().
Fixes: b8713c4dbfa3 ("cifs: Add some helper functions")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Daniel Müller says:
====================
On Android, APKs (android packages; zip packages with somewhat
prescriptive contents) are first class citizens in the system: the
shared objects contained in them don't exist in unpacked form on the
file system. Rather, they are mmaped directly from within the archive
and the archive is also what the kernel is aware of.
For users that complicates the process of attaching a uprobe to a
function contained in a shared object in one such APK: they'd have to
find the byte offset of said function from the beginning of the archive.
That is cumbersome to do manually and can be fragile, because various
changes could invalidate said offset.
That is why for uprobes inside ELF files (not inside an APK), commit
d112c9ce249b ("libbpf: Support function name-based attach uprobes") added
support for attaching to symbols by name. On Android, that mechanism
currently does not work, because this logic is not APK aware.
This patch set introduces first class support for attaching uprobes to
functions inside ELF objects contained in APKs via function names. We
add support for recognizing the following syntax for a binary path:
<archive>!/<binary-in-archive>
(e.g., /system/app/test-app.apk!/lib/arm64-v8a/libc++.so)
This syntax is common in the Android eco system and used by tools such
as simpleperf. It is also what is being proposed for bcc [0].
If the user provides such a binary path, we find <binary-in-archive>
(lib/arm64-v8a/libc++.so in the example) inside of <archive>
(/system/app/test-app.apk). We perform the regular ELF offset search
inside the binary and add that to the offset within the archive itself,
to retrieve the offset at which to attach the uprobe.
[0] https://github.com/iovisor/bcc/pull/4440
Changelog
---------
v3->v4:
- use ERR_PTR instead of libbpf_err_ptr() in zip_archive_open()
- eliminated err variable from elf_find_func_offset_from_archive()
v2->v3:
- adjusted zip_archive_open() to report errno
- fixed provided libbpf_strlcpy() buffer size argument
- adjusted find_cd() to handle errors better
- use fewer local variables in get_entry_at_offset()
v1->v2:
- removed unaligned_* types
- switched to using __u32 and __u16
- switched to using errno constants instead of hard-coded negative values
- added another pr_debug() message
- shortened central_directory_* to cd_*
- inlined cd_file_header_at_offset() function
- bunch of syntactical changes
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
This change adds support for attaching uprobes to shared objects located
in APKs, which is relevant for Android systems where various libraries
may reside in APKs. To make that happen, we extend the syntax for the
"binary path" argument to attach to with that supported by various
Android tools:
<archive>!/<binary-in-archive>
For example:
/system/app/test-app/test-app.apk!/lib/arm64-v8a/libc++_shared.so
APKs need to be specified via full path, i.e., we do not attempt to
resolve mere file names by searching system directories.
We cannot currently test this functionality end-to-end in an automated
fashion, because it relies on an Android system being present, but there
is no support for that in CI. I have tested the functionality manually,
by creating a libbpf program containing a uretprobe, attaching it to a
function inside a shared object inside an APK, and verifying the sanity
of the returned values.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-4-deso@posteo.net
|
|
This change splits the elf_find_func_offset() function in two:
elf_find_func_offset(), which now accepts an already opened Elf object
instead of a path to a file that is to be opened, as well as
elf_find_func_offset_from_file(), which opens a binary based on a
path and then invokes elf_find_func_offset() on the Elf object. Having
this split in responsibilities will allow us to call
elf_find_func_offset() from other code paths on Elf objects that did not
necessarily come from a file on disk.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-3-deso@posteo.net
|
|
This change implements support for reading zip archives, including
opening an archive, finding an entry based on its path and name in it,
and closing it.
The code was copied from https://github.com/iovisor/bcc/pull/4440, which
implements similar functionality for bcc. The author confirmed that he
is fine with this usage and the corresponding relicensing. I adjusted it
to adhere to libbpf coding standards.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Michał Gregorczyk <michalgr@meta.com>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-2-deso@posteo.net
|
|
In commit d96d937d7c5c ("bpf: Add __uninit kfunc annotation"), the
__uninit kfunc annotation was documented in kfuncs.rst. You have to
fully underline a section in rst, or the build will issue a warning that
the title underline is too short:
./Documentation/bpf/kfuncs.rst:104: WARNING: Title underline too short.
2.2.2 __uninit Annotation
--------------------
This patch fixes that title underline.
Fixes: d96d937d7c5c ("bpf: Add __uninit kfunc annotation")
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230301194910.602738-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In commit 66e3a13e7c2c ("bpf: Add bpf_dynptr_slice and
bpf_dynptr_slice_rdwr"), the bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() kfuncs were added to BPF. These kfuncs included
doxygen headers, but unfortunately those headers are not properly
formatted according to [0], and causes the following warnings during the
docs build:
./kernel/bpf/helpers.c:2225: warning: \
Excess function parameter 'returns' description in 'bpf_dynptr_slice'
./kernel/bpf/helpers.c:2303: warning: \
Excess function parameter 'returns' description in 'bpf_dynptr_slice_rdwr'
...
This patch fixes those doxygen comments.
[0]: https://docs.kernel.org/doc-guide/kernel-doc.html#function-documentation
Fixes: 66e3a13e7c2c ("bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr")
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230301194910.602738-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Applications need to be able to program the SBI implementation specific
or custom firmware events in addition to the standard firmware events.
Remove a check in the driver that prohibits the programming of the custom
firmware events.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230208074314.3661406-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
expected messages'
Eduard Zingerman says:
====================
This patch allows to specify program flags and multiple verifier log
messages for the test_loader kind of tests. For example:
tools/testing/selftets/bpf/progs/foobar.c:
SEC("tc")
__success __log_level(7)
__msg("first message")
__msg("next message")
__flag(BPF_F_ANY_ALIGNMENT)
int buz(struct __sk_buff *skb)
{ ... }
It was developed by Andrii Nakryiko ([1]), I reused it in a
"test_verifier tests migration to inline assembly" patch series ([2]),
but the series is currently stuck on my side.
Andrii asked to spin this particular patch separately ([3]).
[1] https://lore.kernel.org/bpf/CAEf4BzZH0ZxorCi7nPDbRqSK9f+410RooNwNJGwfw8=0a5i1nw@mail.gmail.com/
[2] https://lore.kernel.org/bpf/20230123145148.2791939-1-eddyz87@gmail.com/
[3] https://lore.kernel.org/bpf/20230123145148.2791939-1-eddyz87@gmail.com/T/#m52e806c5a679a2aa8f484d011be7ec105939127a
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Extend __flag attribute by allowing to specify one of the following:
* BPF_F_STRICT_ALIGNMENT
* BPF_F_ANY_ALIGNMENT
* BPF_F_TEST_RND_HI32
* BPF_F_TEST_STATE_FREQ
* BPF_F_SLEEPABLE
* BPF_F_XDP_HAS_FRAGS
* Some numeric value
Extend __msg attribute by allowing to specify multiple exepcted messages.
All messages are expected to be present in the verifier log in the
order of application.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301175417.3146070-2-eddyz87@gmail.com
[ Eduard: added commit message, formatting, comments ]
|
|
Viktor Malik says:
====================
Fixing several issues reported by Coverity and Clang Static Analyzer
(scan-build) for libbpf, mostly removing unnecessary symbols and
assignments.
No functional changes should be introduced.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Clang Static Analyser (scan-build) reports some unused symbols and dead
assignments in the linker_append_elf_relos function. Clean these up.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/c5c8fe9f411b69afada8399d23bb048ef2a70535.1677658777.git.vmalik@redhat.com
|
|
Clang Static Analyzer (scan-build) reports several dead assignments in
libbpf where the assigned value is unconditionally overridden by another
value before it is read. Remove these assignments.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/5503d18966583e55158471ebbb2f67374b11bf5e.1677658777.git.vmalik@redhat.com
|
|
Coverity reports that the first check of 'err' in bpf_object__init_maps
is always false as 'err' is initialized to 0 at that point. Remove the
unnecessary ternary operator.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/78a3702f2ea9f32a84faaae9b674c56269d330a7.1677658777.git.vmalik@redhat.com
|
|
If target is bpf, there is no __loongarch__ definition, __BITS_PER_LONG
defaults to 32, __NR_nanosleep is not defined:
#if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32
#define __NR_nanosleep 101
__SC_3264(__NR_nanosleep, sys_nanosleep_time32, sys_nanosleep)
#endif
Work around this problem, by explicitly setting __BITS_PER_LONG to
__loongarch_grlen which is defined by compiler as 64 for LA64.
This is similar with commit 36e70b9b06bf ("selftests, bpf: Fix broken
riscv build").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1677585781-21628-1-git-send-email-yangtiezhu@loongson.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Make new GSS Kerberos Kunit tests work on non-x86 platforms
* tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Properly terminate test case arrays
SUNRPC: Let Kunit tests run with some enctypes compiled out
|
|
Keep the config S390 select list sorted.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit f05f62d04271f ("s390/vmem: get rid of memory segment list")
reshuffled the call to vmem_add_mapping() in __segment_load(), which now
overwrites rc after it was set to contain the segment type code.
As result, __segment_load() will now always return 0 on success, which
corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable
segment. This results in a kernel crash when loading a read-only segment
as dcssblk block device, and trying to write to it.
Instead of reshuffling code again, make sure to return the segment type
on success, and also describe this rather delicate and unexpected logic
in the function comment. Also initialize new segtype variable with
invalid value, to prevent possible future confusion.
Fixes: f05f62d04271 ("s390/vmem: get rid of memory segment list")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The argument to do_div() is a 32-bit integer, and it was read from a
32-bit register so there is no point in doing a 64-bit division on it.
On 32-bit arm, do_div() causes a compile-time warning here:
include/asm-generic/div64.h:238:22: error: passing argument 1 of '__div64_32' from incompatible pointer type [-Werror=incompatible-pointer-types]
238 | __rem = __div64_32(&(n), __base); \
| ^~~~
| |
| unsigned int *
drivers/power/supply/qcom_battmgr.c:1130:4: note: in expansion of macro 'do_div'
1130 | do_div(battmgr->status.percent, 100);
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The of_iomap() function returns NULL if it fails. It never returns
error pointers. Fix the check accordingly.
Fixes: 6286bbb40576 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If alloc_soc_dts() fails, then we can just return. Trying to free
"soc_dts" will lead to an Oops.
Fixes: 8c1876939663 ("thermal: intel Quark SoC X1000 DTS thermal driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Kumar Kartikeya Dwivedi says:
====================
This set adds support for kptrs in percpu hashmaps, percpu LRU hashmaps,
and local storage maps (covering sk, cgrp, task, inode).
Tests are expanded to test more existing maps at runtime and also test
the code path for the local storage maps (which is shared by all
implementations).
A question for reviewers is what the position of the BPF runtime should
be on dealing with reference cycles that can be created by BPF programs
at runtime using this additional support. For instance, one can store
the kptr of the task in its own task local storage, creating a cycle
which prevents destruction of task local storage. Cycles can be formed
using arbitrarily long kptr ownership chains. Therefore, just preventing
storage of such kptrs in some maps is not a sufficient solution, and is
more likely to hurt usability.
There is precedence in existing runtimes which promise memory safety,
like Rust, where reference cycles and memory leaks are permitted.
However, traditionally the safety guarantees of BPF have been stronger.
Thus, more discussion and thought is invited on this topic to ensure we
cover all usage aspects.
Changelog:
----------
v2 -> v3
v2: https://lore.kernel.org/bpf/20230221200646.2500777-1-memxor@gmail.com/
* Fix a use-after-free bug in local storage patch
* Fix selftest for aarch64 (don't use fentry/fmod_ret)
* Wait for RCU Tasks Trace GP along with RCU GP in selftest
v1 -> v2
v1: https://lore.kernel.org/bpf/20230219155249.1755998-1-memxor@gmail.com
* Simplify selftests, fix a couple of bugs
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Firstly, ensure programs successfully load when using all of the
supported maps. Then, extend existing tests to test more cases at
runtime. We are currently testing both the synchronous freeing of items
and asynchronous destruction when map is freed, but the code needs to be
adjusted a bit to be able to also accomodate support for percpu maps.
We now do a delete on the item (and update for array maps which has a
similar effect for kptrs) to perform a synchronous free of the kptr, and
test destruction both for the synchronous and asynchronous deletion.
Next time the program runs, it should observe the refcount as 1 since
all existing references should have been released by then. By running
the program after both possible paths freeing kptrs, we establish that
they correctly release resources. Next, we augment the existing test to
also test the same code path shared by all local storage maps using a
task local storage map.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230225154010.391965-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable support for kptrs in local storage maps by wiring up the freeing
of these kptrs from map value. Freeing of bpf_local_storage_map is only
delayed in case there are special fields, therefore bpf_selem_free_*
path can also only dereference smap safely in that case. This is
recorded using a bool utilizing a hole in bpF_local_storage_elem. It
could have been tagged in the pointer value smap using the lowest bit
(since alignment > 1), but since there was already a hole I went with
the simpler option. Only the map structure freeing is delayed using RCU
barriers, as the buckets aren't used when selem is being freed, so they
can be freed once all readers of the bucket lists can no longer access
it.
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230225154010.391965-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable support for kptrs in percpu BPF hashmap and percpu BPF LRU
hashmap by wiring up the freeing of these kptrs from percpu map
elements.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230225154010.391965-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Joanne Koong says:
====================
This patchset is the 2nd in the dynptr series. The 1st can be found here [0].
This patchset adds skb and xdp type dynptrs, which have two main benefits for
packet parsing:
* allowing operations on sizes that are not statically known at
compile-time (eg variable-sized accesses).
* more ergonomic and less brittle iteration through data (eg does not need
manual if checking for being within bounds of data_end)
When comparing the differences in runtime for packet parsing without dynptrs
vs. with dynptrs, there is no noticeable difference. Patch 9 contains more
details as well as examples of how to use skb and xdp dynptrs.
[0] https://lore.kernel.org/bpf/20220523210712.3641569-1-joannelkoong@gmail.com/
---
Changelog:
v12 = https://lore.kernel.org/bpf/20230226085120.3907863-1-joannelkoong@gmail.com/
v12 -> v13:
* Fix missing { } for case statement
v11 = https://lore.kernel.org/bpf/20230222060747.2562549-1-joannelkoong@gmail.com/
v11 -> v12:
* Change constant mem size checking to use "__szk" kfunc annotation
for slices
* Use autoloading for success selftests
v10 = https://lore.kernel.org/bpf/20230216225524.1192789-1-joannelkoong@gmail.com/
v10 -> v11:
* Reject bpf_dynptr_slice_rdwr() for non-writable progs at load time
instead of runtime
* Add additional patch (__uninit kfunc annotation)
* Expand on documentation
* Add bpf_dynptr_write() calls for persisting writes in tests
v9 = https://lore.kernel.org/bpf/20230127191703.3864860-1-joannelkoong@gmail.com/
v9 -> v10:
* Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr interface
* Add some more tests
* Split up patchset into more parts to make it easier to review
v8 = https://lore.kernel.org/bpf/20230126233439.3739120-1-joannelkoong@gmail.com/
v8 -> v9:
* Fix dynptr_get_type() to check non-stack dynptrs
v7 = https://lore.kernel.org/bpf/20221021011510.1890852-1-joannelkoong@gmail.com/
v7 -> v8:
* Change helpers to kfuncs
* Add 2 new patches (1/5 and 2/5)
v6 = https://lore.kernel.org/bpf/20220907183129.745846-1-joannelkoong@gmail.com/
v6 -> v7
* Change bpf_dynptr_data() to return read-only data slices if the skb prog
is read-only (Martin)
* Add test "skb_invalid_write" to test that writes to rd-only data slices
are rejected
v5 = https://lore.kernel.org/bpf/20220831183224.3754305-1-joannelkoong@gmail.com/
v5 -> v6
* Address kernel test robot errors by static inlining
v4 = https://lore.kernel.org/bpf/20220822235649.2218031-1-joannelkoong@gmail.com/
v4 -> v5
* Address kernel test robot errors for configs w/out CONFIG_NET set
* For data slices, return PTR_TO_MEM instead of PTR_TO_PACKET (Kumar)
* Split selftests into subtests (Andrii)
* Remove insn patching. Use rdonly and rdwr protos for dynptr skb
construction (Andrii)
* bpf_dynptr_data() returns NULL for rd-only dynptrs. There will be a
separate bpf_dynptr_data_rdonly() added later (Andrii and Kumar)
v3 = https://lore.kernel.org/bpf/20220822193442.657638-1-joannelkoong@gmail.com/
v3 -> v4
* Forgot to commit --amend the kernel test robot error fixups
v2 = https://lore.kernel.org/bpf/20220811230501.2632393-1-joannelkoong@gmail.com/
v2 -> v3
* Fix kernel test robot build test errors
v1 = https://lore.kernel.org/bpf/20220726184706.954822-1-joannelkoong@gmail.com/
v1 -> v2
* Return data slices to rd-only skb dynptrs (Martin)
* bpf_dynptr_write allows writes to frags for skb dynptrs, but always
invalidates associated data slices (Martin)
* Use switch casing instead of ifs (Andrii)
* Use 0xFD for experimental kind number in the selftest (Zvi)
* Put selftest conversions w/ dynptrs into new files (Alexei)
* Add new selftest "test_cls_redirect_dynptr.c"
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test skb and xdp dynptr functionality in the following ways:
1) progs/test_cls_redirect_dynptr.c
* Rewrite "progs/test_cls_redirect.c" test to use dynptrs to parse
skb data
* This is a great example of how dynptrs can be used to simplify a
lot of the parsing logic for non-statically known values.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t cls_redirect"):
original version: 0.092 sec
with dynptrs: 0.078 sec
2) progs/test_xdp_dynptr.c
* Rewrite "progs/test_xdp.c" test to use dynptrs to parse xdp data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t xdp_attach"):
original version: 0.118 sec
with dynptrs: 0.094 sec
3) progs/test_l4lb_noinline_dynptr.c
* Rewrite "progs/test_l4lb_noinline.c" test to use dynptrs to parse
skb data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t l4lb_all"):
original version: 0.062 sec
with dynptrs: 0.081 sec
For number of processed verifier instructions:
original version: 6268 insns
with dynptrs: 2588 insns
4) progs/test_parse_tcp_hdr_opt_dynptr.c
* Add sample code for parsing tcp hdr opt lookup using dynptrs.
This logic is lifted from a real-world use case of packet parsing
in katran [0], a layer 4 load balancer. The original version
"progs/test_parse_tcp_hdr_opt.c" (not using dynptrs) is included
here as well, for comparison.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t parse_tcp_hdr_opt"):
original version: 0.031 sec
with dynptrs: 0.045 sec
5) progs/dynptr_success.c
* Add test case "test_skb_readonly" for testing attempts at writes
on a prog type with read-only skb ctx.
* Add "test_dynptr_skb_data" for testing that bpf_dynptr_data isn't
supported for skb progs.
6) progs/dynptr_fail.c
* Add test cases "skb_invalid_data_slice{1,2,3,4}" and
"xdp_invalid_data_slice{1,2}" for testing that helpers that modify the
underlying packet buffer automatically invalidate the associated
data slice.
* Add test cases "skb_invalid_ctx" and "xdp_invalid_ctx" for testing
that prog types that do not support bpf_dynptr_from_skb/xdp don't
have access to the API.
* Add test case "dynptr_slice_var_len{1,2}" for testing that
variable-sized len can't be passed in to bpf_dynptr_slice
* Add test case "skb_invalid_slice_write" for testing that writes to a
read-only data slice are rejected by the verifier.
* Add test case "data_slice_out_of_bounds_skb" for testing that
writes to an area outside the slice are rejected.
* Add test case "invalid_slice_rdwr_rdonly" for testing that prog
types that don't allow writes to packet data don't accept any calls
to bpf_dynptr_slice_rdwr.
[0] https://github.com/facebookincubator/katran/blob/main/katran/lib/bpf/pckt_parsing.h
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230301154953.641654-11-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words. It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.
That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more. And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation. It's a lose-lose
situation.
So just change the 'u32[2]' into a 'u64' and be done with it.
We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).
So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.
This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently. By just using a saner data structure, it went from
unsigned __capi;
CAP_FOR_EACH_U32(__capi) {
if (a.cap[__capi] != b.cap[__capi])
return false;
}
return true;
to just being
return a.val == b.val;
instead. Which is rather more obvious both to humans and to compilers.
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr.
The user must pass in a buffer to store the contents of the data slice
if a direct pointer to the data cannot be obtained.
For skb and xdp type dynptrs, these two APIs are the only way to obtain
a data slice. However, for other types of dynptrs, there is no
difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data.
For skb type dynptrs, the data is copied into the user provided buffer
if any of the data is not in the linear portion of the skb. For xdp type
dynptrs, the data is copied into the user provided buffer if the data is
between xdp frags.
If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then
the skb will be uncloned (see bpf_unclone_prologue()).
Please note that any bpf_dynptr_write() automatically invalidates any prior
data slices of the skb dynptr. This is because the skb may be cloned or
may need to pull its paged buffer into the head. As such, any
bpf_dynptr_write() will automatically have its prior data slices
invalidated, even if the write is to data in the skb head of an uncloned
skb. Please note as well that any other helper calls that change the
underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data
slices of the skb dynptr as well, for the same reasons.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-10-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add xdp dynptrs, which are dynptrs whose underlying pointer points
to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of xdp->data and xdp->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For reads and writes on the dynptr, this includes reading/writing
from/to and across fragments. Data slices through the bpf_dynptr_data
API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() should be used.
For examples of how xdp dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-9-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add skb dynptrs, which are dynptrs whose underlying pointer points
to a skb. The dynptr acts on skb data. skb dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of skb->data and skb->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For bpf prog types that don't support writes on skb data, the dynptr is
read-only (bpf_dynptr_write() will return an error)
For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write()
interfaces, reading and writing from/to data in the head as well as from/to
non-linear paged buffers is supported. Data slices through the
bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used.
For examples of how skb dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-8-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds __uninit as a kfunc annotation.
This will be useful for scenarios such as for example in dynptrs,
indicating whether the dynptr should be checked by the verifier as an
initialized or an uninitialized dynptr.
Without this annotation, the alternative would be needing to hard-code
in the verifier the specific kfunc to indicate that arg should be
treated as an uninitialized arg.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-7-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
