summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-01drm/amd/display: 3.2.77Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: extend compute job timeoutJiawei
extend compute lockup timeout to 60000 for SR-IOV. Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Jiawei <Jiawei.Gu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: No need support vcn decodeEmily Deng
As no need to support vcn decode feature, so disable the ring for SR-IOV. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: postpone entering fullaccess modeMonk Liu
if host support new handshake we only need to enter fullaccess_mode in ip_init() part, otherwise we need to do it before reading vbios (becuase host prepares vbios for VF only after received REQ_GPU_INIT event under legacy handshake) Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: adjust sequence of ip_discovery init and timeout_settingMonk Liu
what: 1)move timtout setting before ip_early_init to reduce exclusive mode cost for SRIOV 2)move ip_discovery_init() to inside of amdgpu_discovery_reg_base_init() it is a prepare for the later upcoming patches. why: in later upcoming patches we would use a new mailbox event -- "req_gpu_init_data", which is a callback hooked in adev->virt.ops and this callback send a new event "REQ_GPU_INIT_DAT" to host to notify host to do some preparation like "IP discovery/vbios on the VF FB" and this callback must be: A) invoked after set_ip_block() because virt.ops is configured during set_ip_block() B) invoked before ip_discovery_init() becausen ip_discovery_init() need host side prepares everything in VF FB first. current place of ip_discovery_init() is before we can invoke callback of adev->virt.ops, thus we must move ip_discovery_init() to a place after the adev->virt.ops all settle done, and the perfect place is in amdgpu_discovery_reg_base_init() Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: equip new req_init_data handshakeMonk Liu
by this new handshake host side can prepare vbios/ip-discovery and pf&vf exchange data upon recieving this request without stopping world switch. this way the world switch is less impacted by VF's exclusive mode request Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: use static mmio offset for NV mailboxMonk Liu
what: with the new "req_init_data" handshake we need to use mailbox before do IP discovery, so in mxgpu_nv.c file the original SOC15_REG method won'twork because that depends on IP discovery complete first. how: so the solution is to always use static MMIO offset for NV+ mailbox registers. HW team confirm us all MAILBOX registers will be at the same offset for all ASICs, no IP discovery needed for those registers Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: introduce new request and its functionMonk Liu
1) modify xgpu_nv_send_access_requests to support new idh request 2) introduce new function: req_gpu_init_data() which is used to notify host to prepare vbios/ip-discovery/pfvf exchange Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: introduce new idh_request/event enumMonk Liu
new idh_request and ihd_event to prepare for the new handshake protocol implementation later Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: cleanup idh event/req for NV headersMonk Liu
1) drop the headers from AI in mxgpu_nv.c, should refer to mxgpu_nv.h 2) the IDH_EVENT_MAX is not used and not aligned with host side so drop it 3) the IDH_TEXT_MESSAG was provided in host but not defined in guest Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amd/amdgpu: Fix SMUIO/PWR Confusion (v2)Tom St Denis
The PWR block was merged into the SMUIO block by revision 12 so we add that to the smuio_12_0_0 headers. (v2): Drop nonsensical smuio_10_0_0 header Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amd/amdgpu: Move PWR_MISC_CNTL_STATUS to its own headerTom St Denis
The register is part of the PWR block not the GC block. Move to its own header. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amd/amdgpu: Add missing SMUIO v12 register to headersTom St Denis
This register is needed by umr. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu/uvd7: remove unnecessary conversion to boolChen Zhou
The conversion to bool is not needed, remove it. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/radeon: align short build logMasahiro Yamada
This beautifies the build log. [Before] HOSTCC drivers/gpu/drm/radeon/mkregtable MKREGTABLE drivers/gpu/drm/radeon/r100_reg_safe.h MKREGTABLE drivers/gpu/drm/radeon/rn50_reg_safe.h CC [M] drivers/gpu/drm/radeon/r100.o MKREGTABLE drivers/gpu/drm/radeon/r300_reg_safe.h CC [M] drivers/gpu/drm/radeon/r300.o [After] HOSTCC drivers/gpu/drm/radeon/mkregtable MKREG drivers/gpu/drm/radeon/r100_reg_safe.h MKREG drivers/gpu/drm/radeon/rn50_reg_safe.h CC [M] drivers/gpu/drm/radeon/r100.o MKREG drivers/gpu/drm/radeon/r300_reg_safe.h CC [M] drivers/gpu/drm/radeon/r300.o Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/radeon: use pattern rule to avoid code duplication in MakefileMasahiro Yamada
This Makefile repeats similar build rules. Use a pattern rule. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/radeon: fix build rules of *_reg_safe.hMasahiro Yamada
if_changed must have FORCE as a prerequisite, and the targets must be added to 'targets'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/radeon: remove unneeded header include pathMasahiro Yamada
A header include path without $(srctree)/ is suspicious because it does not work with O= builds. You can build drivers/gpu/drm/radeon/ without this include path. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Ignore the not supported error from pspEmily Deng
As the VCN firmware will not use vf vmr now. And new psp policy won't support set tmr now. For driver compatible issue, ignore the not support error. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Add 4k resolution for virtual displayEmily Deng
Add 4k resolution for virtual connector. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Virtual display need to support multiple ctrcsEmily Deng
The crtc num is determined by virtual_display parameter. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: disable ras query and iject during gpu resetJohn Clements
added flag to ras context to indicate if ras query functionality is ready Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: added xgmi ras error reset sequenceJohn Clements
added mechanism to clear xgmi ras status inbetween error queries Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: cleanup all virtualization detection routineMonk Liu
we need to move virt detection much earlier because: 1) HW team confirms us that RCC_IOV_FUNC_IDENTIFIER will always be at DE5 (dw) mmio offset from vega10, this way there is no need to implement detect_hw_virt() routine in each nbio/chip file. for VI SRIOV chip (tonga & fiji), the BIF_IOV_FUNC_IDENTIFIER is at 0x1503 2) we need to acknowledged we are SRIOV VF before we do IP discovery because the IP discovery content will be updated by host everytime after it recieved a new coming "REQ_GPU_INIT_DATA" request from guest (there will be patches for this new handshake soon). Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: amends feature bits for MM bandwidth mgrMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: purge ip_discovery headersMonk Liu
those two headers are not needed for ip discovery Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Fix FRU data checkingKent Russell
Ensure that when we memcpy, we don't end up copying more data than the struct supports. For now, this is 16 characters for product number and serial number, and 32 chars for product name Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Expose TA FW version in fw_version fileKent Russell
Reporting the fw_version just returns 0, the actual version is kept as ta_*_ucode_version. This is the same as the feature reported in the amdgpu_firmware_info debugfs file. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: disabled fru eeprom accessJohn Clements
added asic support checking function to be filled in by supported asic types Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amd/amdgpu: Add GFX9.1 PWR_MISC_CNTL_STATUS register to headersTom St Denis
The registers are needed for umr and not in the headers. I left them in the gfx_v9_0.c since it includes 9.0 and 9.4 headers and including 9.1 headers would result in a lot of duplicate registers clashing. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Add documentation for unique_idKent Russell
Add the amdgpu.rst tie-ins for the unique_id documentation Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Add documentation for PCIe accountingKent Russell
Add the amdgpu.rst tie-ins for the pcie accounting documentation Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Add documentation for memory infoKent Russell
Add the amdgpu.rst tie-ins for the mem_info documentation Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Enable reading FRU chip via I2C v3Kent Russell
Allow for reading of information like manufacturer, product number and serial number from the FRU chip. Report the serial number as the new sysfs file serial_number. Note that this only works on server cards, as consumer cards do not feature the FRU chip, which contains this information. v2: Add documentation to amdgpu.rst, add helper functions, rename functions for consistency, fix bad starting offset v3: Remove testing definitions Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdkfd: kfree the wrong pointerJack Zhang
Originally, it kfrees the wrong pointer for mem_obj. It would cause memory leak under stress test. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: increase HDCP authentication delayBhawanpreet Lakha
[Why] Some displays have an issue where the hdcp chips are initialized after the display has already lit up. This means we can sometimes authentication too early and cause authentication failures. This happens when HDCP is enabled and the display is power cycled. Normally we will authenticate 2 seconds after the display is lit, but some displays need a bit more time. [How] Increase delay to 3 second before we start authentication. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Correctly cancel future watchdog and callback eventsBhawanpreet Lakha
[Why] -We need to cancel future callbacks/watchdogs events when a callback/watchdog event happens [How] -fix typo in event_callback() -cancel callback, not watchdog -cancel watchdog events in event_watchdog_timer(). Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Don't try hdcp1.4 when content_type is set to type1Bhawanpreet Lakha
[Why] When content type property is set to 1. We should enable hdcp2.2 and if we cant then stop. Currently the way it works in DC is that if we fail hdcp2, we will try hdcp1 after. [How] Use link config to force disable hdcp1.4 when type1 is set. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.cEvan Quan
This is ASIC specific and should be placed in _ppt.c of each ASIC. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/powerplay: drop redundant BIF doorbell interrupt operationsEvan Quan
This is already done in soc15.c. And this is really ASIC specific and should not be placed here. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Fix dcn21 num_statesDmytro Laktyushkin
[Why] DML expects num_states to exclude the duplicate state. [How] Set num_states to correct value to prevent array off-by-one error. Also refactor max clock level code for diags. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Enable BT2020 in COLOR_ENCODING propertyStylon Wang
[Why] BT2020 is not supported in COLOR_ENCODING property of planes. Only BT601 and BT709 was available. [How] Allow BT2020 as legit value in setting COLOR_ENCODING property. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: LFC not working on 2.0x range monitors (v2)Aric Cyr
[Why] Nominal pixel clock and EDID information differ in precision so although monitor reports maximum refresh is 2x minimum, LFC was not being enabled. [How] Use minimum refresh rate as nominal/2 when EDID dictates that min refresh = max refresh/2. v2: squash in 64 bit divide fix Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Support plane level CTMStylon Wang
[Why] CTM was only supported at CRTC level and we need color space conversion in linear space at plane level. [How] - Add plane-level CTM to dc interface - Program plane-level CTM in DCN Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Revert change to HDCP display statesIsabel Zhang
[Why] Change is causing a regression where the OPC app no longer functions properly. [How] Revert the changelist causing the issue. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Not doing optimize bandwidth if flip pending.Yongqiang Sun
[Why] In some scenario like 1366x768 VSR enabled connected with a 4K monitor and playing 4K video in clone mode, underflow will be observed due to decrease dppclk when previouse surface scan isn't finished [How] In this use case, surface flip is switching between 4K and 1366x768, 1366x768 needs smaller dppclk, and when decrease the clk and previous surface scan is for 4K and scan isn't done, underflow will happen. Not doing optimize bandwidth in case of flip pending. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Use double buffered DRR timing update by defaultNicholas Kazlauskas
[Why] For some monitors extreme flickering can occur while using LFC for if we're not doing the DRR timing update for V_TOTAL_MIN / V_TOTAL_MAX at the DP start of frame. Hardware can default to any time in the frame which isn't the behavior we want. [How] Add a new function for setting the double buffering mode for DRR timing. Default to DP start of frame double buffering on timing generator init. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Support P010 pixel formatStylon Wang
[Why] P010 pixel format is not declared as supported in DRM and DM. [How] Add P010 format to the support list presented to DRM and checked in DM Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Update function to get optimal number of tapsEric Bernstein
[Why] Diagnostics scaling test failing to set required number of vertical taps in 4:2:0 surface case [How] In dpp3_get_optimal_number_of_taps() need to use LB_MEMORY_CONFIG_3 for 4:2:0 surface case. In resource_build_scaling_params() make sure to also set plane res alpha enable based on updated surface state Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amdgpu: fix hpd bo size calculation errorKevin Wang
the HPD bo size calculation error. the "mem.size" can't present actual BO size all time. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <Christian.Koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-04-29 15:32:32 +0000