| Age | Commit message (Collapse) | Author |
|---|
|
"id" is not a documented property, so drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225642.1783485-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current implementation of gettimex64() makes at least 3 PCIe reads to
get current PHC time. It takes at least 2.2us to get this value back to
userspace. At the same time there is cached value of upper bits of PHC
available for packet timestamps already. This patch reuses cached value
to speed up reading of PHC time.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241114114820.1411660-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hold rcu_read_lock during netdev_nl_napi_set_doit, which calls
napi_by_id and requires rcu_read_lock to be held.
Closes: https://lore.kernel.org/netdev/719083c2-e277-447b-b6ea-ca3acb293a03@redhat.com/
Fixes: 1287c1ae0fc2 ("netdev-genl: Support setting per-NAPI config values")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241114175600.18882-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
- btmtk: Fix ISO interface handling
- Add quirk for ATS2851
- btusb: Add RTL8852BE device 0489:e123
- ISO: Do not emit LE PA/BIG Create Sync if previous is pending
- btusb: Add USB HW IDs for MT7920/MT7925
- btintel_pcie: Add handshake between driver and firmware
- btintel_pcie: Add recovery mechanism
- hci_conn: Use disable_delayed_work_sync
- SCO: Use kref to track lifetime of sco_conn
- ISO: Use kref to track lifetime of iso_conn
- btnxpuart: Add GPIO support to power save feature
- btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x
* tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits)
Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC
Bluetooth: fix use-after-free in device_for_each_child()
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper
Bluetooth: ISO: Send BIG Create Sync via hci_sync
Bluetooth: hci_conn: Remove alloc from critical section
Bluetooth: ISO: Use kref to track lifetime of iso_conn
Bluetooth: SCO: Use kref to track lifetime of sco_conn
Bluetooth: HCI: Add IPC(11) bus type
Bluetooth: btusb: Add 3 HWIDs for MT7925
Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925
Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave
Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending
Bluetooth: ISO: Fix matching parent socket for BIS slave
Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending
Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s
Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()
Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925
Bluetooth: btmtk: adjust the position to init iso data anchor
...
====================
Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Extended netlink error reporting if nfnetlink attribute parser fails,
from Donald Hunter.
2) Incorrect request_module() module, from Simon Horman.
3) A series of patches to reduce memory consumption for set element
transactions.
Florian Westphal says:
"When doing a flush on a set or mass adding/removing elements from a
set, each element needs to allocate 96 bytes to hold the transactional
state.
In such cases, virtually all the information in struct nft_trans_elem
is the same.
Change nft_trans_elem to a flex-array, i.e. a single nft_trans_elem
can hold multiple set element pointers.
The number of elements that can be stored in one nft_trans_elem is limited
by the slab allocator, this series limits the compaction to at most 62
elements as it caps the reallocation to 2048 bytes of memory."
4) A series of patches to prepare the transition to dscp_t in .flowi_tos.
From Guillaume Nault.
5) Support for bitwise operations with two source registers,
from Jeremy Sowden.
* tag 'nf-next-24-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: bitwise: add support for doing AND, OR and XOR directly
netfilter: bitwise: rename some boolean operation functions
netfilter: nf_dup4: Convert nf_dup_ipv4_route() to dscp_t.
netfilter: nft_fib: Convert nft_fib4_eval() to dscp_t.
netfilter: rpfilter: Convert rpfilter_mt() to dscp_t.
netfilter: flow_offload: Convert nft_flow_route() to dscp_t.
netfilter: ipv4: Convert ip_route_me_harder() to dscp_t.
netfilter: nf_tables: allocate element update information dynamically
netfilter: nf_tables: switch trans_elem to real flex array
netfilter: nf_tables: prepare nft audit for set element compaction
netfilter: nf_tables: prepare for multiple elements in nft_trans_elem structure
netfilter: nf_tables: add nft_trans_commit_list_add_elem helper
netfilter: bpf: Pass string literal as format argument of request_module()
netfilter: nfnetlink: Report extack policy errors for batched ops
====================
Link: https://patch.msgid.link/20241115133207.8907-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hitherto, these operations have been converted in user space to
mask-and-xor operations on one register and two immediate values, and it
is the latter which have been evaluated by the kernel. We add support
for evaluating these operations directly in kernel space on one register
and either an immediate value or a second register.
Pablo made a few changes to the original patch:
- EINVAL if NFTA_BITWISE_SREG2 is used with fast version.
- Allow _AND,_OR,_XOR with _DATA != sizeof(u32)
- Dump _SREG2 or _DATA with _AND,_OR,_XOR
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In the next patch we add support for doing AND, OR and XOR operations
directly in the kernel, so rename some functions and an enum constant
related to mask-and-xor boolean operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use ip4h_dscp() instead of reading iph->tos directly.
ip4h_dscp() returns a dscp_t value which is temporarily converted back
to __u8 with inet_dscp_to_dsfield(). When converting ->flowi4_tos to
dscp_t in the future, we'll only have to remove that
inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use ip4h_dscp() instead of reading iph->tos directly.
ip4h_dscp() returns a dscp_t value which is temporarily converted back
to __u8 with inet_dscp_to_dsfield(). When converting ->flowi4_tos to
dscp_t in the future, we'll only have to remove that
inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use ip4h_dscp() instead of reading iph->tos directly.
ip4h_dscp() returns a dscp_t value which is temporarily converted back
to __u8 with inet_dscp_to_dsfield(). When converting ->flowi4_tos to
dscp_t in the future, we'll only have to remove that
inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use ip4h_dscp()instead of reading ip_hdr()->tos directly.
ip4h_dscp() returns a dscp_t value which is temporarily converted back
to __u8 with inet_dscp_to_dsfield(). When converting ->flowi4_tos to
dscp_t in the future, we'll only have to remove that
inet_dscp_to_dsfield() call.
Also, remove the comment about the net/ip.h include file, since it's
now required for the ip4h_dscp() helper too.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use ip4h_dscp()instead of reading iph->tos directly.
ip4h_dscp() returns a dscp_t value which is temporarily converted back
to __u8 with inet_dscp_to_dsfield(). When converting ->flowi4_tos to
dscp_t in the future, we'll only have to remove that
inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
A recent commit jumped over the dst hash computation and
left the symbol uninitialized. Fix this by explicitly
computing the dst hash before it is used.
Fixes: 0045e3d80613 ("xfrm: Cache used outbound xfrm states at the policy.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Edward Cree says:
====================
net: make RSS+RXNFC semantics more explicit
The original semantics of ntuple filters with FLOW_RSS were not
fully understood by all drivers, some ignoring the ring_cookie from
the flow rule. Require this support to be explicitly declared by
the driver for filters relying on it to be inserted, and add self-
test coverage for this functionality.
Also teach ethtool_check_max_channel() about this.
====================
Link: https://patch.msgid.link/cover.1731499021.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The combination of ntuple action (ring_cookie) and RSS context can
cause an ntuple rule to target a higher queue than appears in any
RSS indirection table or directly in the ntuple rule, since the two
numbers are added together. Verify the logic that prevents reducing
the queue count in this case.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/58276b800ab78c0a79c1918046ccae7fe45ba802.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test creates an ntuple filter with 'action 2' and an RSS context whose
indirection table has entries 0 and 1. Resulting traffic should go to
queues 2 and 3; verify that it never hits queues 0 and 1.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/114afdf4d2867f72ed27751e8e08fe8b128a8529.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sfc hardware does not support filters with only ipproto + dst-port;
adding dst-ip to the flow spec allows the rss_ctx test to be run on
these devices.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://patch.msgid.link/8e5d23c8f21310c23c080cc7bcd31b76f8fd3096.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ethtool_check_max_channel(), the new RX count must not only cover the
max queue indices in RSS indirection tables and RXNFC destinations
separately, but must also, for RXNFC rules with FLOW_RSS, cover the sum
of the destination queue and the maximum index in the associated RSS
context's indirection table, since that is the highest queue that the
rule can actually deliver traffic to.
It could be argued that the max queue across all custom RSS contexts
(ethtool_get_max_rss_ctx_channel()) need no longer be considered, since
any context to which packets can actually be delivered will be targeted
by some RXNFC rule and its max will thus be allowed for by
ethtool_get_max_rxnfc_channel(). For simplicity we keep both checks, so
even RSS contexts unused by any RXNFC rule must fit the channel count.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/43257d375434bef388e36181492aa4c458b88336.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ethtool ntuple filters with FLOW_RSS were originally defined as adding
the base queue ID (ring_cookie) to the value from the indirection table,
so that the same table could distribute over more than one set of queues
when used by different filters.
However, some drivers / hardware ignore the ring_cookie, and simply use
the indirection table entries as queue IDs directly. Thus, for drivers
which have not opted in by setting ethtool_ops.cap_rss_rxnfc_adds to
declare that they support the original (addition) semantics, reject in
ethtool_set_rxnfc any filter which combines FLOW_RSS and a nonzero ring.
(For a ring_cookie of zero, both behaviours are equivalent.)
Set the cap bit in sfc, as it is known to support this feature.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://patch.msgid.link/cc3da0844083b0e301a33092a6299e4042b65221.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The example has "interrupt" property which is not a defined property. It
should be "interrupts" instead. "interrupts" also should not contain a
phandle.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225825.1785588-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"marvell,reg-init" is not yet documented by schema. It's irrelevant to
the example, so just drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225713.1784118-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sparx5 switchdev driver can be built either with or without support
for the Lan969x switch. However, it cannot be built-in when the lan969x
driver is a loadable module because of a link-time dependency:
arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/sparx5/sparx5_main.o:(.rodata+0xd44): undefined reference to `lan969x_desc'
Add a Kconfig dependency to reflect this in Kconfig, allowing all
the valid configurations but forcing sparx5 to be a loadable module
as well if lan969x is.
Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241113115513.4132548-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We recently added this error path. We need to call enetc_pci_remove()
before returning. It cleans up the resources from enetc_pci_probe().
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/93888efa-c838-4682-a7e5-e6bf318e844e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mdio45_ethtool_gset_npage() function isn't called, so let's remove
it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Link: https://patch.msgid.link/20241112105430.438491-2-alistair@alistair23.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mdio45_ethtool_gset() is never called, so let's remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Link: https://patch.msgid.link/20241112105430.438491-1-alistair@alistair23.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2024-11-14
We've added 9 non-merge commits during the last 4 day(s) which contain
a total of 3 files changed, 226 insertions(+), 84 deletions(-).
The main changes are:
1) Fixes to bpf_msg_push/pop_data and test_sockmap. The changes has
dependency on the other changes in the bpf-next/net branch,
from Zijian Zhang.
2) Drop netns codes from mptcp test. Reuse the common helpers in
test_progs, from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf, sockmap: Fix sk_msg_reset_curr
bpf, sockmap: Several fixes to bpf_msg_pop_data
bpf, sockmap: Several fixes to bpf_msg_push_data
selftests/bpf: Add more tests for test_txmsg_push_pop in test_sockmap
selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap
selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap
selftests/bpf: Fix SENDPAGE data logic in test_sockmap
selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap
selftests/bpf: Drop netns helpers in mptcp
====================
Link: https://patch.msgid.link/20241114202832.3187927-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Guillaume Nault says:
====================
ipv4: Prepare bpf helpers to .flowi4_tos conversion.
Continue the process of making a dscp_t variable available when setting
.flowi4_tos. This series focuses on the BPF helpers that initialise a
struct flowi4 manually.
The objective is to eventually convert .flowi4_tos to dscp_t, (to get
type annotation and prevent ECN bits from interfering with DSCP).
====================
Link: https://patch.msgid.link/cover.1731064982.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use ip4h_dscp() to get the DSCP from the IPv4 header, then convert the
dscp_t value to __u8 with inet_dscp_to_dsfield().
Then, when we'll convert .flowi4_tos to dscp_t, we'll just have to drop
the inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8338a12377c44f698a651d1ce357dd92bdf18120.1731064982.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use ip4h_dscp() to get the DSCP from the IPv4 header, then convert the
dscp_t value to __u8 with inet_dscp_to_dsfield().
Then, when we'll convert .flowi4_tos to dscp_t, we'll just have to drop
the inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/35eacc8955003e434afb1365d404193cc98a9579.1731064982.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Donald Hunter says:
====================
tools/net/ynl: rework async notification handling
Revert patch 1bf70e6c3a53 which modified check_ntf() and instead add a
new poll_ntf() with async notification semantics. See patch 2 for a
detailed description.
====================
Link: https://patch.msgid.link/20241113090843.72917-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The notification handling in ynl is currently very simple, using sleep()
to wait a period of time and then handling all the buffered messages in
a single batch.
This patch adds async notification handling so that messages can be
processed as they are received. This makes it possible to use ynl as a
library that supplies notifications in a timely manner.
- Add poll_ntf() to be a generator that yields 1 notification at a
time and blocks until a notification is available.
- Add a --duration parameter to the CLI, with --sleep as an alias.
./tools/net/ynl/cli.py \
--spec <SPEC> --subscribe <TOPIC> [ --duration <SECS> ]
The cli will report any notifications for duration seconds and then
exit. If duration is not specified, then it will poll forever, until
interrupted.
Here is an example python snippet that shows how to use ynl as a library
for receiving notifications:
ynl = YnlFamily(f"{dir}/rt_route.yaml")
ynl.ntf_subscribe('rtnlgrp-ipv4-route')
for event in ynl.poll_ntf():
handle(event)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241113090843.72917-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 1bf70e6c3a5346966c25e0a1ff492945b25d3f80.
This modification to check_ntf() is being reverted so that its behaviour
remains equivalent to ynl_ntf_check() in the C YNL. Instead a new
poll_ntf() will be added in a separate patch.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241113090843.72917-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'net-phy-switch-eee_broken_modes-to-linkmode-bitmap-and-add-accessor'
Heiner Kallweit says:
====================
net: phy: switch eee_broken_modes to linkmode bitmap and add accessor
eee_broken_modes has a eee_cap1 register layout currently. This doesn't
allow to flag e.g. 2.5Gbps or 5Gbps BaseT EEE as broken. To overcome
this limitation switch eee_broken_modes to a linkmode bitmap.
Add an accessor for the bitmap and use it in r8169.
====================
Link: https://patch.msgid.link/405734c5-0ed4-40e4-9ac9-91084b9536d6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vendor driver r8125 doesn't advertise 2.5G EEE on RTL8125A, and r8126
doesn't advertise 5G EEE. Likely there are compatibility issues,
therefore do the same in r8169.
With this change we don't have to disable 2.5G EEE advertisement in
rtl8125a_config_eee_phy() any longer.
We use new phylib accessor phy_set_eee_broken() to mark the respective
EEE modes as broken.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce185e10-8a2f-4cf8-a49b-fd8fb3c3c8a1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an accessor for eee_broken_modes, so that drivers
don't have to deal with phylib internals.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/0f8ee279-d40d-4489-a3b0-d993472d744a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
eee_broken_modes has a eee_cap1 register layout currently. This doen't
allow to flag e.g. 2.5Gbps or 5Gbps BaseT EEE as broken. To overcome
this limitation switch eee_broken_modes to a linkmode bitmap.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dfe0c9ff-84b0-4328-86d7-e917ebc084a1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds the initial implementation of MGMT_OP_HCI_CMD_SYNC as
documented in mgmt-api (BlueZ tree):
Send HCI command and wait for event Command
===========================================
Command Code: 0x005B
Controller Index: <controller id>
Command Parameters: Opcode (2 Octets)
Event (1 Octet)
Timeout (1 Octet)
Parameter Length (2 Octets)
Parameter (variable)
Return Parameters: Response (1-variable Octets)
This command may be used to send a HCI command and wait for an
(optional) event.
The HCI command is specified by the Opcode, any arbitrary is supported
including vendor commands, but contrary to the like of
Raw/User channel it is run as an HCI command send by the kernel
since it uses its command synchronization thus it is possible to wait
for a specific event as a response.
Setting event to 0x00 will cause the command to wait for either
HCI Command Status or HCI Command Complete.
Timeout is specified in seconds, setting it to 0 will cause the
default timeout to be used.
Possible errors: Failed
Invalid Parameters
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Syzbot has reported the following KASAN splat:
BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0
Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980
CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
? device_for_each_child+0x18f/0x1a0
print_report+0x13a/0x4cb
? __virt_addr_valid+0x5e/0x590
? __phys_addr+0xc6/0x150
? device_for_each_child+0x18f/0x1a0
kasan_report+0xda/0x110
? device_for_each_child+0x18f/0x1a0
? __pfx_dev_memalloc_noio+0x10/0x10
device_for_each_child+0x18f/0x1a0
? __pfx_device_for_each_child+0x10/0x10
pm_runtime_set_memalloc_noio+0xf2/0x180
netdev_unregister_kobject+0x1ed/0x270
unregister_netdevice_many_notify+0x123c/0x1d80
? __mutex_trylock_common+0xde/0x250
? __pfx_unregister_netdevice_many_notify+0x10/0x10
? trace_contention_end+0xe6/0x140
? __mutex_lock+0x4e7/0x8f0
? __pfx_lock_acquire.part.0+0x10/0x10
? rcu_is_watching+0x12/0xc0
? unregister_netdev+0x12/0x30
unregister_netdevice_queue+0x30d/0x3f0
? __pfx_unregister_netdevice_queue+0x10/0x10
? __pfx_down_write+0x10/0x10
unregister_netdev+0x1c/0x30
bnep_session+0x1fb3/0x2ab0
? __pfx_bnep_session+0x10/0x10
? __pfx_lock_release+0x10/0x10
? __pfx_woken_wake_function+0x10/0x10
? __kthread_parkme+0x132/0x200
? __pfx_bnep_session+0x10/0x10
? kthread+0x13a/0x370
? __pfx_bnep_session+0x10/0x10
kthread+0x2b7/0x370
? __pfx_kthread+0x10/0x10
ret_from_fork+0x48/0x80
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 4974:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x1d1/0x440
hci_alloc_dev_priv+0x1d/0x2820
__vhci_create_device+0xef/0x7d0
vhci_write+0x2c7/0x480
vfs_write+0x6a0/0xfc0
ksys_write+0x12f/0x260
do_syscall_64+0xc7/0x250
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 4979:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x4f/0x70
kfree+0x141/0x490
hci_release_dev+0x4d9/0x600
bt_host_release+0x6a/0xb0
device_release+0xa4/0x240
kobject_put+0x1ec/0x5a0
put_device+0x1f/0x30
vhci_release+0x81/0xf0
__fput+0x3f6/0xb30
task_work_run+0x151/0x250
do_exit+0xa79/0x2c30
do_group_exit+0xd5/0x2a0
get_signal+0x1fcd/0x2210
arch_do_signal_or_restart+0x93/0x780
syscall_exit_to_user_mode+0x140/0x290
do_syscall_64+0xd4/0x250
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In 'hci_conn_del_sysfs()', 'device_unregister()' may be called when
an underlying (kobject) reference counter is greater than 1. This
means that reparenting (happened when the device is actually freed)
is delayed and, during that delay, parent controller device (hciX)
may be deleted. Since the latter may create a dangling pointer to
freed parent, avoid that scenario by reparenting to NULL explicitly.
Reported-by: syzbot+6cf5652d3df49fae2e3f@syzkaller.appspotmail.com
Tested-by: syzbot+6cf5652d3df49fae2e3f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6cf5652d3df49fae2e3f
Fixes: a85fb91e3d72 ("Bluetooth: Fix double free in hci_conn_cleanup")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Since 61a939c68ee0 ("Bluetooth: Queue incoming ACL data until
BT_CONNECTED state is reached") there is no long the need to call
mgmt_device_connected as ACL data will be queued until BT_CONNECTED
state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219458
Link: https://github.com/bluez/bluez/issues/1014
Fixes: 333b4fd11e89 ("Bluetooth: L2CAP: Fix uaf in l2cap_connect")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Before issuing the LE BIG Create Sync command, an available BIG handle
is chosen by iterating through the conn_hash list and finding the first
unused value.
If a BIG is terminated, the associated hcons are removed from the list
and the LE BIG Terminate Sync command is sent via hci_sync queue.
However, a new LE BIG Create sync command might be issued via
hci_send_cmd, before the previous BIG sync was terminated. This
can cause the same BIG handle to be reused and the LE BIG Create Sync
to fail with Command Disallowed.
< HCI Command: LE Broadcast Isochronous Group Create Sync (0x08|0x006b)
BIG Handle: 0x00
BIG Sync Handle: 0x0002
Encryption: Unencrypted (0x00)
Broadcast Code[16]: 00000000000000000000000000000000
Maximum Number Subevents: 0x00
Timeout: 20000 ms (0x07d0)
Number of BIS: 1
BIS ID: 0x01
> HCI Event: Command Status (0x0f) plen 4
LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1
Status: Command Disallowed (0x0c)
< HCI Command: LE Broadcast Isochronous Group Terminate Sync (0x08|0x006c)
BIG Handle: 0x00
This commit fixes the ordering of the LE BIG Create Sync/LE BIG Terminate
Sync commands, to make sure that either the previous BIG sync is
terminated before reusing the handle, or that a new handle is chosen
for a new sync.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This removes the kzalloc memory allocation inside critical section in
create_pa_sync, fixing the following message that appears when the kernel
is compiled with CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at
include/linux/sched/mm.h:321
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This make use of kref to keep track of reference of iso_conn which
allows better tracking of its lifetime with usage of things like
kref_get_unless_zero in a similar way as used in l2cap_chan.
In addition to it remove call to iso_sock_set_timer on iso_sock_disconn
since at that point it is useless to set a timer as the sk will be freed
there is nothing to be done in iso_sock_timeout.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This make use of kref to keep track of reference of sco_conn which
allows better tracking of its lifetime with usage of things like
kref_get_unless_zero in a similar way as used in l2cap_chan.
In addition to it remove call to sco_sock_set_timer on __sco_sock_close
since at that point it is useless to set a timer as the sk will be freed
there is nothing to be done in sco_sock_timeout.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Zephyr(1) has been using the same bus defines as Linux so tools likes of
btmon, etc, are able to decode the bus used by the driver to transport
HCI packets.
Link: https://github.com/zephyrproject-rtos/zephyr/pull/80808
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip.
VID 0x0489, PID 0xe14f
VID 0x0489, PID 0xe150
VID 0x0489, PID 0xe151
Patch has been tested successfully and controller is recognized
device pair successfully.
MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add VID 0489 & PID e124 for MediaTek MT7925 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e124 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently, hci_conn_hash_lookup_big only checks for BIS master connections,
by filtering out connections with the destination address set. This commit
updates this function to also consider BIS slave connections, since it is
also used for a Broadcast Receiver to set an available BIG handle before
issuing the LE BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The Bluetooth Core spec does not allow a LE BIG Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2586).
In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added
to mark that the LE BIG Create Sync command has been sent for a hcon.
Once the BIG Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
