summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-01dt-bindings: iio: admv1014: make all regs requiredAntoniu Miclaus
Make the regulators required in the dt bindings. Despite the fact that the datasheet is not explicit enough, all the specifications of the part are built around these pins being supplied. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230731144404.389255-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-01iio: cdc: ad7150: relax return value check for IRQ getMatti Vaittinen
fwnode_irq_get[_byname]() were changed to not return 0 anymore. The special error case where device-tree based IRQ mapping fails can't no longer be reliably detected from this return value. This yields a functional change in the driver where the mapping failure is treated as an error. The mapping failure can occur for example when the device-tree IRQ information translation call-back(s) (xlate) fail, IRQ domain is not found, IRQ type conflicts, etc. In most cases this indicates an error in the device-tree and special handling is not really required. One more thing to note is that ACPI APIs do not return zero for any failures so this special handling did only apply on device-tree based systems. Drop the special handling for DT mapping failures as these can no longer be separated from other errors at driver side. Change all failures in IRQ getting to be handled by continuing without the events instead of aborting the probe upon certain errors. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/3ad1c6f195ead3dfa8711235e1dead139d27f700.1690890774.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-01iio: mb1232: relax return value check for IRQ getMatti Vaittinen
fwnode_irq_get() was changed to not return 0 anymore. Drop check for return value 0. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/9e18cf49a8bb581a84c3fa548ea577e2a3eb840d.1690890774.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: adc: fix the return value handle for platform_get_irq()Ruan Jinjie
There is no possible for platform_get_irq() to return 0 and the return value of platform_get_irq() is more sensible to show the error reason. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230727131607.2897937-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29tools: iio: iio_generic_buffer: Fix some integer type and calculationChenyuan Mi
In function size_from_channelarray(), the return value 'bytes' is defined as int type. However, the calcution of 'bytes' in this function is designed to use the unsigned int type. So it is necessary to change 'bytes' type to unsigned int to avoid integer overflow. The size_from_channelarray() is called in main() function, its return value is directly multipled by 'buf_len' and then used as the malloc() parameter. The 'buf_len' is completely controllable by user, thus a multiplication overflow may occur here. This could allocate an unexpected small area. Signed-off-by: Chenyuan Mi <michenyuan@huawei.com> Link: https://lore.kernel.org/r/20230725092407.62545-1-michenyuan@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: potentiometer: mcp4531: Use i2c_get_match_data()Biju Das
Replace device_get_match_data() and i2c_match_id() by i2c_get_match _data() by making similar I2C and DT-based matching table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230723102743.102284-1-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: potentiometer: mcp4018: Use i2c_get_match_data()Biju Das
Replace of_device_get_match_data() and i2c_match_id() by i2c_get_match _data() by making similar I2C and DT-based matching table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230723105209.175545-1-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: core: Fix issues and style of the commentsAndy Shevchenko
The `scripts/kernel-doc -v -none -Wall` reports several issues with the kernel doc in IIO core C file. Update the comments accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230724110204.46285-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: core: Switch to krealloc_array()Andy Shevchenko
Let the krealloc_array() copy the original data and check for a multiplication overflow. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230724110204.46285-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: core: Use sysfs_match_string() helperAndy Shevchenko
Use sysfs_match_string() helper instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230724110204.46285-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: accel: adxl313: Use i2c_get_match_dataBiju Das
Replace device_get_match_data() and i2c_match_id() by i2c_get_match _data() as we have similar I2C and DT-based matching table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230725171624.331283-3-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: accel: adxl313: Fix adxl313_i2c_id[] tableBiju Das
The .driver_data in adxl313_i2c_id[] for adxl312 and adxl314 is wrong. Fix this issue by adding corresponding adxl31x_chip_info data. Reported-by: Jonathan Cameron <jic23@kernel.org> Closes: https://lore.kernel.org/all/20230722172832.04ad7738@jic23-huawei Fixes: a7a1c60bc4c9 ("drivers: iio: accel: adxl312 and adxl314 support") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230725171624.331283-2-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: adc: Remove redundant dev_err_probe()Ruan Jinjie
There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20230727073912.4178659-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: adc: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20230714174628.4057920-1-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: imu: adis16475.c: Add has_burst32 flag to adis16477 devicesRamona Bolboaca
adis16477 devices support burst32 function, thus has_burst32 flag should be set to true. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230719123152.309624-3-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: imu: adis16475.c: Remove unused enum elementsRamona Bolboaca
Remove unused enum elements ADIS16475_SCAN_DIAG_S_FLAGS and ADIS16475_SCAN_CRC_FAILURE. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230719123152.309624-2-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: Add driver for Murata IRS-D200Waqar Hameed
Murata IRS-D200 is a PIR sensor for human detection. It has support for raw data measurements and detection event notification. Add a driver with support for triggered buffer and events. Map the various settings to the `iio` framework, e.g. threshold values, sampling frequency, filter frequencies etc. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/d218a1bc75402b5ebd6e12a563f7315f83fe966c.1689753076.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: Add event enums for running period and countWaqar Hameed
There are devices (such as Murata IRS-D200 PIR proximity sensor) that check the data signal with a running period. I.e. for a specified time, they count the number of conditions that have occurred, and then signal if that is more than a specified amount. `IIO_EV_INFO_PERIOD` resets when the condition no longer is true and is therefore not suitable for these devices. Add a new `iio_event_info` `IIO_EV_INFO_RUNNING_PERIOD` that can be used as a running period. Also add a new `IIO_EV_INFO_RUNNING_COUNT` that can be used to specify the number of conditions that must occur during this running period. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/ee4a801ae9b9c4716c7bd23d8f79f232351df8bd.1689753076.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23dt-bindings: iio: proximity: Add Murata IRS-D200Waqar Hameed
Murata IRS-D200 is a PIR sensor for human detection. It uses the I2C bus for communication with interrupt support. Add devicetree bindings requiring the compatible string, I2C slave address (reg), power supply and interrupts. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/09975910ea638a9aa893411124bbd2a5c98e45c3.1689753076.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: amplifiers: ad8366: add support for HMC792A AttenuatorKim Seer Paller
This change adds support for the HMC792A Digital Attenuator. The HMC792A is a broadband 6-bit GaAs MMIC Digital Attenuator operating from DC to 6.0 GHz with 15.75 dB attenuation control range in 0.25 dB steps. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/hmc792a.pdf Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Link: https://lore.kernel.org/r/20230721121038.183404-1-kimseer.paller@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: core: Improve indentation in a few placesAndy Shevchenko
Improve an indentation in a few places to increase readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230721170022.3461-9-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: core: Get rid of redundant 'else'Andy Shevchenko
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230721170022.3461-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: core: Use min() instead of min_t() to make code more robustAndy Shevchenko
min() has strict type checking and preferred over min_t() for unsigned types to avoid overflow. Here it's unclear why min_t() was chosen since both variables are of the same type. In any case update to use min(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230721170022.3461-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: adc: meson: init voltage control bitsGeorge Stark
Define and init voltage configuration bits. Those bits are inited in vendor boot code (bl2, bl33) already so do it in the driver to not depend on other code. Introduced bits: REG11[0] - selects Vref. 0 - calibration voltage, 1 - VDDA. txlx and later SoCs support VDDA or calibration voltage as Vref, but others support only calibration voltage. For newer platforms vendor uses VDDA as default. REG11[1] - reserved bit. g12a and later SoCs must write 1, others SoCs write 0. REG11[5] - Vref voltage. 0 - 0.9v, 1 - 1.8v. g12a and later SoCs must write 0, others SoCs write 1. REG11[6] - selects common-mode voltage, 0: from AVDD, 1: from Vref. g12a and later SoCs must write 0, others SoCs write 1. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-4-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: adc: meson: init internal continuous ring counterGeorge Stark
Disable internal continuous ring counter at init stage. Disable value depends on SoC family: gxl and later SoCs write 1, others write 0. This bit are inited in vendor boot code (bl2, bl33) already so do it in the driver to not depend on other code. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-3-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: adc: meson: init channels 0,1 input muxesGeorge Stark
Set up input channels 0,1 muxes in the same way as for the channels 2-7 later in the code. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-2-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: accel: adxl355: Simplify probe()Biju Das
Simplify the probe() by replacing of_device_get_match_data() and i2c_match_id() by i2c_get_match_data() as we have similar I2C and DT-based matching table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230716175218.130557-2-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: support reading from channel 7 mux inputsGeorge Stark
Add IIO channel for all muxed inputs of channel 7. Meson saradc channel 7 is connected to a mux that can switch input to well-known sources like Vdd, GND and several Vdd dividers. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-7-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: add channel labelsGeorge Stark
Add channel labels to provide human-readable names for the inputs. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-6-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: add enum for iio channel numbersGeorge Stark
Channels could be referenced in the driver code and using enum allows to make it more robust. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-5-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upperGeorge Stark
meson_sar_adc_set_chan7_mux is a basic func() for writing single register, defined as static. Moved it up so it could be used in more places. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-4-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: move enums declaration before variables declarationGeorge Stark
Allow to use enum items for variables initialization. For this, move enums upper in the code. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-3-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: remove unused timestamp channelGeorge Stark
Remove IIO_CHAN_SOFT_TIMESTAMP channel because it's used only for buffering mode which is not implemented. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-2-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: chemical: scd4x: Add pressure compensationRoan van Dijk
This patch adds pressure compensation to the scd4x driver. The pressure can be written to the sensor in hPa. The pressure will be compensated internally by the sensor. Signed-off-by: Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20230711101419.2065107-1-roan@protonic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: Make return value check for set_trigger_state() consistentWaqar Hameed
In `iio_trigger_detach_poll_func()` the return value from `trig->ops->set_trigger_state(trig, false)` is checked with `if (ret)`. However, in `iio_trigger_attach_poll_func()` it is checked with `if (ret < 0)`. Resolve this mismatch by only checking for `if (ret)` in both places. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/pndv8eojdey.fsf@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20dt-bindings: iio: adc: qcom,spmi-adc7: use predefined channel idsDmitry Baryshkov
Each of qcom,spmi-adc7-pm*.h headers define a set of ADC channels that can be used for monitoring on thie particular chip. Switch them to use channel IDs defined in the dt-bindings/iio/qcom,spmi-vadc.h header instead of specifying the numeric IDs. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707123027.1510723-2-dmitry.baryshkov@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: ti-lmp92064: add buffering supportLeonard Göhrs
Enable buffered reading of samples from the LMP92064 ADC. The main benefit of this change is being able to read out current and voltage measurements in a single transfer, allowing instantaneous power measurements. Reads into the buffer can be triggered by any software triggers, e.g. the iio-trig-hrtimer: $ mkdir /sys/kernel/config/iio/triggers/hrtimer/my-trigger $ cat /sys/bus/iio/devices/iio\:device3/name lmp92064 $ iio_readdev -t my-trigger -b 16 iio:device3 | hexdump WARNING: High-speed mode not enabled 0000000 0000 0176 0101 0001 5507 abd5 7645 1768 0000010 0000 016d 0101 0001 ee1e ac6b 7645 1768 ... Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230707063635.1496437-1-l.goehrs@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: stm32-adc: Use devm_platform_get_and_ioremap_resource()Yangtao Li
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230704095808.33780-1-frank.li@vivo.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: qcom-spmi-adc5: Add ADC5_GPIO2_100K_PUKonrad Dybcio
Even though it existed in bindings for the longest time, ADC5_GPIO2_100K_PU was never assigned in the driver. Do so. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230627-topic-adc-v1-1-c61581abffa3@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: imu: inv_mpu6050: read the full fifo when processing dataJean-Baptiste Maneyrol
When processing data read the full fifo data in 1 time. If there are several samples in the FIFO, it means we are experiencing system delay. In this case, it is better to read all data with 1 bus access than to add additional latency by doing several ones. This requires to use a bigger buffer depending on chip FIFO size and do an additional local data copy before sending. But the cost is minimal and behavior is still better like this under system heavy load. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20230623082924.283967-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20dt-bindings: iio: adc: ti,ads1015: fix datarate max value and meaningMarco Felsch
Datarate (dr) is a 3-bit wide register field. Values from 0 to 7 are allowed for all devices but only for the ADS1115 devices a value of 7 does make a difference. While on it fix the description of the datarate for ADS1115 devices as well. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230621160857.3400747-1-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: ad7192: Use sysfs_emit_atAlisa Roman
Replace scnprintf with sysfs_emit_at which is the preferred alternative. Also make sure each fractional digit is in its place by padding with zeros up to 3 digits: "...%03d...". Signed-off-by: Alisa Roman <alisa.roman@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230620163135.93780-1-alisa.roman@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20dt-bindings: iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADCMaksim Kiselev
Allwinner's D1/T113s/R329/T507 SoCs have a new general purpose ADC. This ADC is the same for all of this SoCs. The only difference is the number of available channels. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-4-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADCMaksim Kiselev
The General Purpose ADC (GPADC) can convert the external signal into a certain proportion of digital value, to realize the measurement of analog signal, which can be applied to power detection and key detection. Theoretically, this ADC can support up to 16 channels. All SoCs below contain this GPADC IP. The only difference between them is the number of available channels: T113 - 1 channel D1 - 2 channels R329 - 4 channels T507 - 4 channels Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-3-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: Kconfig change description for Allwinner GPADCMaksim Kiselev
This patch adds SoCs names to Allwinner GPADC description to make it more informative. Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-2-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add calibration bias for 4040/4200Astrid Rost
The calibration bias is setting the LED current to change the detection distance. Add read/write attribute for proximity calibration bias and read attribute for available values. This is supported for vcnl4040 and vcnl4200. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-9-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add oversampling_ratio for 4040/4200Astrid Rost
Add the proximity multi pulse (PS_MPS) as oversampling_ratio. Instead of one single pulse per every defined time frame, one can program2, 4, or even 8 pulses. This leads to a longer IRED on-time for each proximity measurement value, which also results in a higher detection range. Add read/write attribute for proximity oversampling-ratio and read attribute for available oversampling-ratio. This is supported for vcnl4040 and vcnl4200. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-8-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add period for vcnl4040/4200Astrid Rost
Add read/write attribute for proximity and illuminance period. The period is set in the interrupt persistence flags(PS_PERS and ALS_PERS). An interrupt will not be asserted if the raw value is not over (or lower) than the threshold for the set continued amount of measurements. The time in seconds is calculated by the number of continued refreshes multiplied with the integration time. It will always pick the next lower possible value. The period changes, if the integration time is changed. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-7-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: add illuminance irq vcnl4040/4200Astrid Rost
Add support to configure ambient light sensor interrupts and threshold limits for vcnl4040 and vcnl4200. If an interrupt is detected an event will be pushed to the event interface. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-6-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add als_it for vcnl4040/4200Astrid Rost
Add illuminance integration time for vcnl4040 and vcnl4200. Add read/write attribute for illuminance integration time and read attribute for available integration times. Set scale and sampling rate according to the integration time. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-5-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-04-17 18:01:45 +0000