summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-16MAINTAINERS: Add myself as the co-maintainer for Actions Semi platformsManivannan Sadhasivam
Since I've been doing the maintainership work for couple of cycles, we've decided to add myself as the co-maintainer along with Andreas. Link: https://lore.kernel.org/r/20200114084348.25659-2-manivannan.sadhasivam@linaro.org Cc: "Andreas Färber" <afaerber@suse.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'v5.5-rockchip-dtsfixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A fix for the Beelink A1 IR receiver setting the correct polarity. * tag 'v5.5-rockchip-dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix IR on Beelink A1 Link: https://lore.kernel.org/r/2054603.JKFSmqfO19@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'sunxi-fixes-for-5.5' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A couple of fixes for GPIO polarity and regulators on the A64 olinuxino. * tag 'sunxi-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator Link: https://lore.kernel.org/r/582f4fda-38af-43e8-af58-957aee5b9dd8.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'imx-fixes-5.5-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.5, round 2: - Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0" error seen with UART1. - Correct compatible of RV3029 RTC device on imx6q-dhcom board. - Correct interrupt trigger type for magnetometer on board imx8mq-librem5-devkit. - A series from Anson Huang to fix vdd3p0 power supplier for a few NXP development board. - Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so that Ethernet interface on the board works properly. - Fix Toradex Colibri board to get NAND flash support back. - Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which is connected to PMIC SW2 output rather than a fixed 3V3 rail. - Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by kernel. - Fix endian setting for DCFG on LS1028A SoC, so that register access of DCFG becomes correct. * tag 'imx-fixes-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection ARM: dts: imx7ulp: fix reg of cpu node arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm arm64: dts: ls1028a: fix endian setting for dcfg ARM: dts: imx6q-dhcom: fix rtc compatible Link: https://lore.kernel.org/r/20200110011836.GW4456@T480 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'amlogic-fixes' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes arm-soc: Amlogic fixes for v5.5-rc * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt dt-bindings: reset: meson8b: fix duplicate reset IDs soc: amlogic: meson-ee-pwrc: propagate errors from pm_genpd_init() soc: amlogic: meson-ee-pwrc: propagate PD provider registration errors ARM: dts: meson8: fix the size of the PMU registers arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQs Link: https://lore.kernel.org/r/7hmuaweavi.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-09ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash supportMarcel Ziswiler
Turns out when introducing the eMMC version the gpmi node required for NAND flash support got enabled exclusively on Colibri iMX7D 512MB. Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sll-evk: Remove incorrect power supply assignmentAnson Huang
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 96a9169cf621 ("ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sl-evk: Remove incorrect power supply assignmentAnson Huang
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 3feea8805d6f ("ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sx-sdb: Remove incorrect power supply assignmentAnson Huang
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 37a4bdead109 ("ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignmentAnson Huang
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DLJagan Teki
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on the 1.5 version of the i.Core MX6 cpu module. The 1.5 version differs from the original one for a few details, including the ethernet PHY interface clock provider. With this commit, the ethernet interface works properly: SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver While before using the 1.5 version, ethernet failed to startup do to un-clocked PHY interface: fec 2188000.ethernet eth0: could not attach to PHY Similar fix has merged for i.Core MX6Q but missed to update for DL. Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support") Cc: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-08Merge tag 'aspeed-5.5-devicetree-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/fixes ASPEED device tree fixes for 5.5 Fixes for some badly applied patches that went in to 5.5. There is also a fix for an incorrect i2c address. * tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location Link: https://lore.kernel.org/r/CACPK8XcjazgORXNZBU1ECMukXG4HA8D9VeDxiSPifDk_iB7_dw@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08ARM: omap2plus: select RESET_CONTROLLERArnd Bergmann
With the new omap_prm driver added unconditionally, omap2 builds fail when the reset controller subsystem is disabled: drivers/soc/ti/omap_prm.o: In function `omap_prm_probe': omap_prm.c:(.text+0x2d4): undefined reference to `devm_reset_controller_register' Link: https://lore.kernel.org/r/20191216132132.3330811-1-arnd@arndb.de Fixes: 3e99cb214f03 ("soc: ti: add initial PRM driver with reset control support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08ARM: davinci: select CONFIG_RESET_CONTROLLERArnd Bergmann
Selecting RESET_CONTROLLER is actually required, otherwise we can get a link failure in the clock driver: drivers/clk/davinci/psc.o: In function `__davinci_psc_register_clocks': psc.c:(.text+0x9a0): undefined reference to `devm_reset_controller_register' drivers/clk/davinci/psc-da850.o: In function `da850_psc0_init': psc-da850.c:(.text+0x24): undefined reference to `reset_controller_add_lookup' Link: https://lore.kernel.org/r/20191210195202.622734-1-arnd@arndb.de Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5") Cc: <stable@vger.kernel.org> # v5.4 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08ARM: dts: aspeed: rainier: Fix fan fault and presenceBrandon Wyman
The PCA9552 used for fan fault and presence information is at address 61h, not 60h. Fixes: 2efc118ce3c3 ("ARM: dts: aspeed: rainier: Add i2c devices") Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: rainier: Remove duplicate i2c bussesJoel Stanley
This is a revert of "ARM: dts: aspeed: rainier: Add i2c devices", which was already applied to the tree. Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices") Reviewed-by: Jim Wright <wrightj@linux.vnet.ibm.com> Tested-by: Jim Wright <wrightj@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Remove duplicate flash nodesJoel Stanley
This is a revert of "ARM: dts: aspeed: tacoma: Enable FMC and SPI devices" which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 8737481e381c ("ARM: dts: aspeed: tacoma: Enable FMC and SPI devices") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Remove duplicate i2c bussesJoel Stanley
This is a revert of "ARM: dts: aspeed: tacoma: Enable I2C busses", which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 606bcdde6724 ("ARM: dts: aspeed: tacoma: Enable I2C busses") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Fix fsi master nodeJoel Stanley
This was broken when applying "ARM: dts: aspeed: tacoma: Add host FSI description". Fixes: a981c93300ef ("ARM: dts: aspeed: tacoma: Add host FSI description") Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed-g6: Fix FSI master locationJoel Stanley
The FIS nodes were placed incorrectly in the device tree. Fixes: 0fe4e304782c ("ARM: dts: aspeed-g6: Describe FSI masters") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-07Merge tag 'omap-for-v5.5/fixes-rc5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.5-rc cycle Here are few fixes for v5.5-rc cycle: - Two corner case fixes related to ti-sysc driver clock issues - Fixes for am57xx dts for pcie gpios - Beagle-x15 regulator dts fix - Fix for wkup_m3_ipc driver race * tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot ARM: dts: beagle-x15-common: Model 5V0 regulator ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes bus: ti-sysc: Fix iterating over clocks ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap Link: https://lore.kernel.org/r/pull-1578418121-413328@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06Merge tag 'tee-optee-fix-for-5.5' of ↵Olof Johansson
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes Fix OP-TEE multi page dynamic shm pool alloc * tag 'tee-optee-fix-for-5.5' of git://git.linaro.org:/people/jens.wiklander/linux-tee: optee: Fix multi page dynamic shm pool alloc Link: https://lore.kernel.org/r/20200103103710.GA3469@jax Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06ARM: dts: mmp3: Fix the TWSI rangesLubomir Rintel
The register blocks don't occupy 4K. In fact, some blocks are packed close to others and assuming they're 4K causes overlaps: pxa2xx-i2c d4033800.i2c: can't request region for resource [mem 0xd4033800-0xd40347ff] Link: https://lore.kernel.org/r/20191220071443.247183-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06clk: mmp2: Fix the order of timer mux parentsLubomir Rintel
Determined empirically, no documentation is available. The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of commit f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")' Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06ARM: mmp: do not divide the clock rateLubomir Rintel
This was done because the clock driver returned the wrong rate, which is fixed in "clk: mmp2: Fix the order of timer mux parents" patch. Link: https://lore.kernel.org/r/20191218190454.420358-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06arm64: dts: rockchip: Fix IR on Beelink A1Robin Murphy
Apparently I wasn't paying enough attention... And nor is the lazy test of `cat /dev/lirc0` sufficiently blunder-proof. Oh well, with the correct polarity, let's also hook up a keymap now that one for the standard Beelink remote has handily appeared. Fixes: 79702ded8c2f ("arm64: dts: rockchip: Add Beelink A1") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/44269c08e2a5d75b03ded87d2eb11621762d8249.1577636223.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-03optee: Fix multi page dynamic shm pool allocSumit Garg
optee_shm_register() expected pages to be passed as an array of page pointers rather than as an array of contiguous pages. So fix that via correctly passing pages as per expectation. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Reported-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-12-23arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometerAngus Ainslie (Purism)
The LSM9DS1 uses a high level interrupt. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Fixes: eb4ea0857c83 ("arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connectionMarek Vasut
The SGTL5000 VDDIO is connected to the PMIC SW2 output, not to a fixed 3V3 rail. Describe this correctly in the DT. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23ARM: dts: imx7ulp: fix reg of cpu nodePeng Fan
According to arm cpus binding doc, " On 32-bit ARM v7 or later systems this property is required and matches the CPU MPIDR[23:0] register bits. Bits [23:0] in the reg cell must be set to bits [23:0] in MPIDR. All other bits in the reg cell must be set to 0. " In i.MX7ULP, the MPIDR[23:0] is 0xf00, not 0, so fix it. Otherwise there will be warning: "DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map" Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mmAdam Ford
Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error. This patch changes to ahb clock from SDMA1_ROOT to AHB which fixes the timeout error. Fixes: a05ea40eb384 ("arm64: dts: imx: Add i.mx8mm dtsi support") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23arm64: dts: ls1028a: fix endian setting for dcfgYinbo Zhu
DCFG block uses little endian. Fix it so that register access becomes correct. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23ARM: dts: imx6q-dhcom: fix rtc compatibleAlexandre Belloni
The only correct and documented compatible string for the rv3029 is microcrystal,rv3029. Fix it up. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-18Merge tag 'socfpga_dts_fix_for_v5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: agilex/stratix10: fix pmu interrupt numbers - Fix incorrect PMU interrupts numbers on the Agilex/Stratix10 platforms * tag 'socfpga_dts_fix_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex/stratix10: fix pmu interrupt numbers Link: https://lore.kernel.org/r/20191218161336.32377-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-17soc: ti: wkup_m3_ipc: Fix race condition with rproc_bootDave Gerlach
Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability. To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned. Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: beagle-x15-common: Model 5V0 regulatorKishon Vijay Abraham I
On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: am571x-idk: Fix gpios property to have the correct gpio numberKishon Vijay Abraham I
commit d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") while adding the dt node for EP mode for DRA7 platform, added rc node for am571x-idk and populated gpios property with "gpio3 23". However the GPIO_PCIE_SWRST line is actually connected to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested with another am57x board in EP mode which doesn't rely on reset from host). Cc: stable <stable@vger.kernel.org> # 4.14+ Fixes: d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodesKishon Vijay Abraham I
PERST# line in the PCIE connector is driven by the host mode and not EP mode. The gpios property here is used for driving the PERST# line. Remove gpios property from all endpoint device tree nodes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarityMarek Szyprowski
Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I didn't get a batch in this weekend, so here's what we queued up last week and today. - A couple of defconfigs add back debugfs -- it used to be implicitly enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency") removed that. - The rest are mostly minor fixlets of the usual kind; some DT tweaks, a headerfile refactor that needs a build fix now, etc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: bcm: Add missing sentinel to bcm2711_compat[] ARM: shmobile: defconfig: Restore debugfs support bus: ti-sysc: Fix missing reset delay handling ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node ARM: mmp: include the correct cputype.h ARM: dts: am437x-gp/epos-evm: fix panel compatible arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: bcm283x: Fix critical trip point ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example ...
2019-12-16bus: ti-sysc: Fix iterating over clocksTony Lindgren
Commit d878970f6ce1 ("bus: ti-sysc: Add separate functions for handling clocks") separated handling of optional clocks from the main clocks, but introduced an issue where we do not necessarily allocate a slot for both fck and ick clocks, but still assume fixed slots for enumerating over the clocks. Let's fix the issue by ensuring we always have slots for both fck and ick even if we don't use ick, and don't attempt to enumerate optional clocks if not allocated. In the long run we might want to simplify things a bit by only allocating space only for the optional clocks as we have only few devices with optional clocks. Fixes: d878970f6ce1 ("bus: ti-sysc: Add separate functions for handling clocks") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-16ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omapTony Lindgren
We must bail out early if the clock is not hw_omap. Otherwise we will try to access invalid address with hwclk->clkdm_name: Unable to handle kernel paging request at virtual address ffffffff Internal error: Oops: 27 [#1] ARM ... (strcmp) from [<c011b348>] (clkdm_lookup+0x40/0x60) [<c011b348>] (clkdm_lookup) from [<c011cb84>] (ti_sysc_clkdm_init+0x5c/0x64) [<c011cb84>] (ti_sysc_clkdm_init) from [<c03680a8>] (sysc_probe+0x948/0x117c) [<c03680a8>] (sysc_probe) from [<c03d0af4>] (platform_drv_probe+0x48/0x98) ... Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-16arm64: dts: agilex/stratix10: fix pmu interrupt numbersDinh Nguyen
Fix up the correct interrupt numbers for the PMU unit on Agilex and Stratix10. Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Cc: linux-stable <stable@vger.kernel.org> Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-12-16Merge tag 'arm-soc/for-5.5/soc-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine fixes for 5.5-rc1, please pull the following: - H. Nikolaus adds a missing sentinel entry to the BCM2711 machine descriptor compatible array which would make multiplatform kernels fail to boot * tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Add missing sentinel to bcm2711_compat[] Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'samsung-fixes-5.5' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung fixes for v5.5 1. Restore debugfs support in exynos_defconfig (as now it is not selected as dependency of tracing). Debugfs is required by systemd and several tests. 2. Maintainers updates. * tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Restore debugfs support MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry MAINTAINERS: Update Lukasz Luba's email address Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'renesas-fixes-for-v5.5-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.5 - Restore debugfs support * tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Restore debugfs support Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'linux-kselftest-5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - ftrace and safesetid test fixes from Masami Hiramatsu - Kunit fixes from Brendan Higgins, Iurii Zaikin, and Heidi Fahim - Kselftest framework fixes from SeongJae Park and Michael Ellerman * tag 'linux-kselftest-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: Support old perl versions kselftest/runner: Print new line in print of timeout log selftests: Fix dangling documentation references to kselftest_module.sh Documentation: kunit: add documentation for kunit_tool Documentation: kunit: fix typos and gramatical errors kunit: testing kunit: Bug fix in test_run_timeout function fs/ext4/inode-test: Fix inode test on 32 bit platforms. selftests: safesetid: Fix Makefile to set correct test program selftests: safesetid: Check the return value of setuid/setgid selftests: safesetid: Move link library to LDLIBS selftests/ftrace: Fix multiple kprobe testcase selftests/ftrace: Do not to use absolute debugfs path selftests/ftrace: Fix ftrace test cases to check unsupported selftests/ftrace: Fix to check the existence of set_ftrace_filter
2019-12-16iommu: fix KASAN use-after-free in iommu_insert_resv_regionEric Auger
In case the new region gets merged into another one, the nr list node is freed. Checking its type while completing the merge algorithm leads to a use-after-free. Use new->type instead. Fixes: 4dbd258ff63e ("iommu: Revisit iommu_insert_resv_region() implementation") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Qian Cai <cai@lca.pw> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Stable <stable@vger.kernel.org> #v5.3+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-16Fix root mounting with no mount optionsLinus Torvalds
The "trivial conversion" in commit cccaa5e33525 ("init: use do_mount() instead of ksys_mount()") was totally broken, since it didn't handle the case of a NULL mount data pointer. And while I had "tested" it (and presumably Dominik had too) that bug was hidden by me having options. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Arnd Bergmann <arnd@arndb.de> Reported-by: Ondřej Jirman <megi@xff.cz> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-and-tested-by: Borislav Petkov <bp@suse.de> Tested-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Eric Biggers <ebiggers@kernel.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-15ARM: bcm: Add missing sentinel to bcm2711_compat[]H. Nikolaus Schaller
commit 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") breaks boot of many other platforms (e.g. OMAP or i.MX6) if CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform config (e.g. omap2plus_defconfig). The symptom is that the OMAP based board does not show any activity beyond "Starting Kernel ..." even with earlycon. Reverting the mentioned commit makes it work again. The real fix is to add the missing NULL sentinel to the bcm2711_compat[] variable-length array. Fixes: 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit (git 2.34.1) at 2024-06-04 16:02:21 +0000