| Age | Commit message (Collapse) | Author |
|---|
|
Use NAPI_POLL_WEIGHT, the default NAPI poll() weight instead of
redefining our own value (which turns out to be 64 as well).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Shijie Luo says:
====================
ipv4: fix bugs when enable route_localnet
When enable route_localnet, route of the 127/8 address is enabled.
But in some situations like arp_announce=2, ARP requests or reply
work abnormally.
This patchset fix some bugs when enable route_localnet.
Change History:
V2:
- Change a single patch to a patchset.
- Add bug fix for arp_ignore = 3.
- Add a couple of test for enabling route_localnet in selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a simple scripts to exercise several situations when enable
route_localnet.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Zhiqiang liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When arp_ignore=3, the NIC won't reply for scope host addresses, but
if enable route_locanet, we need to reply ip address with head 127 and
scope RT_SCOPE_HOST.
Fixes: d0daebc3d622 ("ipv4: Add interface option to enable routing of 127.0.0.0/8")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Suppose we have two interfaces eth0 and eth1 in two hosts, follow
the same steps in the two hosts:
# sysctl -w net.ipv4.conf.eth1.route_localnet=1
# sysctl -w net.ipv4.conf.eth1.arp_announce=2
# ip route del 127.0.0.0/8 dev lo table local
and then set ip to eth1 in host1 like:
# ifconfig eth1 127.25.3.4/24
set ip to eth2 in host2 and ping host1:
# ifconfig eth1 127.25.3.14/24
# ping -I eth1 127.25.3.4
Well, host2 cannot connect to host1.
When set a ip address with head 127, the scope of the address defaults
to RT_SCOPE_HOST. In this situation, host2 will use arp_solicit() to
send a arp request for the mac address of host1 with ip
address 127.25.3.14. When arp_announce=2, inet_select_addr() cannot
select a correct saddr with condition ifa->ifa_scope > scope, because
ifa_scope is RT_SCOPE_HOST and scope is RT_SCOPE_LINK. Then,
inet_select_addr() will go to no_in_dev to lookup all interfaces to find
a primary ip and finally get the primary ip of eth0.
Here I add a localnet_scope defaults to RT_SCOPE_HOST, and when
route_localnet is enabled, this value changes to RT_SCOPE_LINK to make
inet_select_addr() find a correct primary ip as saddr of arp request.
Fixes: d0daebc3d622 ("ipv4: Add interface option to enable routing of 127.0.0.0/8")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tipc_nl_compat_bearer_set() is only called by tipc_nl_compat_link_set()
which already does the check for msg->req check, so remove it from
tipc_nl_compat_bearer_set(), and do the same in tipc_nl_compat_media_set().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
mlxsw: Thermal and hwmon extensions
This patchset from Vadim includes various enhancements to thermal and
hwmon code in mlxsw.
Patch #1 adds a thermal zone for each inter-connect device (gearbox).
These devices are present in SN3800 systems and code to expose their
temperature via hwmon was added in commit 2e265a8b6c09 ("mlxsw: core:
Extend hwmon interface with inter-connect temperature attributes").
Currently, there are multiple thermal zones in mlxsw and only a few
cooling devices. Patch #2 detects the hottest thermal zone and the
cooling devices are switched to follow its trends. RFC was sent last
month [1].
Patch #3 allows to read and report negative temperature of the sensors
mlxsw exposes via hwmon and thermal subsystems.
v2 (Andrew Lunn):
* In patch #3, replace '%u' with '%d' in mlxsw_hwmon_module_temp_show()
[1] https://patchwork.ozlabs.org/patch/1107161/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend macros MLXSW_REG_MTMP_TEMP_TO_MC() to allow support of negative
temperature readout, since chip and others thermal components are
capable of operating within the negative temperature.
With no such support negative temperature will be consider as very high
temperature and it will cause wrong readout and thermal shutdown.
For negative values 2`s complement is used.
Tested in chamber.
Example of chip ambient temperature readout with chamber temperature:
-10 Celsius:
temp1: -6.0C (highest = -5.0C)
-5 Celsius:
temp1: -1.0C (highest = -1.0C)
v2 (Andrew Lunn):
* Replace '%u' with '%d' in mlxsw_hwmon_module_temp_show()
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When multiple sensors are mapped to the same cooling device, the
cooling device should be set according the worst sensor from the
sensors associated with this cooling device.
Provide the hottest thermal zone detection and enforce cooling device
to follow the temperature trends of the hottest zone only.
Prevent competition for the cooling device control from others zones,
by "stable trend" indication. A cooling device will not perform any
actions associated with a zone with a "stable trend".
When other thermal zone is detected as a hottest, a cooling device is
to be switched to following temperature trends of new hottest zone.
Thermal zone score is represented by 32 bits unsigned integer and
calculated according to the next formula:
For T < TZ<t><i>, where t from {normal trip = 0, high trip = 1, hot
trip = 2, critical = 3}:
TZ<i> score = (T + (TZ<t><i> - T) / 2) / (TZ<t><i> - T) * 256 ** j;
Highest thermal zone score s is set as MAX(TZ<i>score);
Following this formula, if TZ<i> is in trip point higher than TZ<k>,
the higher score is to be always assigned to TZ<i>.
For two thermal zones located at the same kind of trip point, the higher
score will be assigned to the zone which is closer to the next trip
point. Thus, the highest score will always be assigned objectively to
the hottest thermal zone.
All the thermal zones initially are to be configured with mode
"enabled" with the "step_wise" governor.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a dedicated thermal zone for each inter-connect device. The
current temperature is obtained from inter-connect temperature sensor
and the default trip points are set to the same values as default ASIC
trip points. These settings could be changed from the user space.
A cooling device (fan) is bound to all inter-connect devices.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix misalignment of policy statement in netlink.c due to automatic
spatch code transformation.
Fixes: 3b0f31f2b8c9 ("genetlink: make policy common to family")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: John Rutherford <john.rutherford@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit bfe59032bd6127ee190edb30be9381a01765b958 ("net: ethernet:
ti: cpsw: use cpsw as drv data")changes
the driver data to struct cpsw_common *cpsw. This is done
only in probe/remove but the suspend/resume functions are
still left with struct net_device *ndev. Hence fix both
suspend & resume also to fetch the updated driver data.
Fixes: bfe59032bd6127ee1 ("net: ethernet: ti: cpsw: use cpsw as drv data")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implement the statistical interface of ethtool, user can use
ethtool -S to show hinic statistics.
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Wei Wang says:
====================
ipv6: avoid taking refcnt on dst during route lookup
Ipv6 route lookup code always grabs refcnt on the dst for the caller.
But for certain cases, grabbing refcnt is not always necessary if the
call path is rcu protected and the caller does not cache the dst.
Another issue in the route lookup logic is:
When there are multiple custom rules, we have to do the lookup into
each table associated to each rule individually. And when we can't
find the route in one table, we grab and release refcnt on
net->ipv6.ip6_null_entry before going to the next table.
This operation is completely redundant, and causes false issue because
net->ipv6.ip6_null_entry is a shared object.
This patch set introduces a new flag RT6_LOOKUP_F_DST_NOREF for route
lookup callers to set, to avoid any manipulation on the dst refcnt. And
it converts the major input and output path to use it.
The performance gain is noticable.
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix: 5.50Mpps
v2->v3:
- Handled fib6_rule_lookup() when CONFIG_IPV6_MULTIPLE_TABLES is not
configured in patch 03 (suggested by David Ahern)
- Removed the renaming of l3mdev_link_scope_lookup() in patch 05
(suggested by David Ahern)
- Moved definition of ip6_route_output_flags() from an inline function
in /net/ipv6/route.c to net/ipv6/route.c in order to address kbuild
error in patch 05
v1->v2:
- Added a helper ip6_rt_put_flags() in patch 3 suggested by David Miller
====================
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For tx path, in most cases, we still have to take refcnt on the dst
cause the caller is caching the dst somewhere. But it still is
beneficial to make use of RT6_LOOKUP_F_DST_NOREF flag while doing the
route lookup. It is cause this flag prevents manipulating refcnt on
net->ipv6.ip6_null_entry when doing fib6_rule_lookup() to traverse each
routing table. The null_entry is a shared object and constant updates on
it cause false sharing.
We converted the current major lookup function ip6_route_output_flags()
to make use of RT6_LOOKUP_F_DST_NOREF.
Together with the change in the rx path, we see noticable performance
boost:
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix: 5.50Mpps
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip6_route_input() is the key function to do the route lookup in the
rx data path. All the callers to this function are already holding rcu
lock. So it is fairly easy to convert it to not take refcnt on the dst:
We pass in flag RT6_LOOKUP_F_DST_NOREF and do skb_dst_set_noref().
This saves a few atomic inc or dec operations and should boost
performance overall.
This also makes the logic more aligned with v4.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch specifically converts the rule lookup logic to honor this
flag and not release refcnt when traversing each rule and calling
lookup() on each routing table.
Similar to previous patch, we also need some special handling of dst
entries in uncached list because there is always 1 refcnt taken for them
even if RT6_LOOKUP_F_DST_NOREF flag is set.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize rt6->rt6i_uncached on the following pre-allocated dsts:
net->ipv6.ip6_null_entry
net->ipv6.ip6_prohibit_entry
net->ipv6.ip6_blk_hole_entry
This is a preparation patch for later commits to be able to distinguish
dst entries in uncached list by doing:
!list_empty(rt6->rt6i_uncached)
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This new flag is to instruct the route lookup function to not take
refcnt on the dst entry. The user which does route lookup with this flag
must properly use rcu protection.
ip6_pol_route() is the major route lookup function for both tx and rx
path.
In this function:
Do not take refcnt on dst if RT6_LOOKUP_F_DST_NOREF flag is set, and
directly return the route entry. The caller should be holding rcu lock
when using this flag, and decide whether to take refcnt or not.
One note on the dst cache in the uncached_list:
As uncached_list does not consume refcnt, one refcnt is always returned
back to the caller even if RT6_LOOKUP_F_DST_NOREF flag is set.
Uncached dst is only possible in the output path. So in such call path,
caller MUST check if the dst is in the uncached_list before assuming
that there is no refcnt taken on the returned dst.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There seems to be some confusion surrounding three PHY interface modes,
specifically 1000BASE-X, 2500BASE-X and SGMII. Add some documentation
to phylib detailing precisely what these interface modes refer to.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The linux-next commit "inet: fix various use-after-free in defrags
units" [1] introduced compilation warnings,
./include/net/inet_frag.h:117:1: warning: 'inline' is not at beginning
of declaration [-Wold-style-declaration]
static void inline fqdir_pre_exit(struct fqdir *fqdir)
^~~~~~
In file included from ./include/net/netns/ipv4.h:10,
from ./include/net/net_namespace.h:20,
from ./include/linux/netdevice.h:38,
from ./include/linux/icmpv6.h:13,
from ./include/linux/ipv6.h:86,
from ./include/net/ipv6.h:12,
from ./include/rdma/ib_verbs.h:51,
from ./include/linux/mlx5/device.h:37,
from ./include/linux/mlx5/driver.h:51,
from
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:37:
[1] https://lore.kernel.org/netdev/20190618180900.88939-3-edumazet@google.com/
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a no-op that simply moves all locking and unlocking of
->reg_lock into trivial helpers. I did that to be able to easily add
some ad hoc instrumentation to those helpers to get some information
on contention and hold times of the mutex. Perhaps others want to do
something similar at some point, so this frees them from doing the
'sed -i' yoga, and have a much smaller 'git diff' while fiddling.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code of create_queues_with_size_backoff() allows the ring size
to become as small as ENA_MIN_RING_SIZE/2. This is a bug since we don't
want the queue ring to be smaller than ENA_MIN_RING_SIZE
In this commit we change the loop's termination condition to look at the
queue size of the next iteration instead of that of the current one,
so that the minimal queue size again becomes ENA_MIN_RING_SIZE.
Fixes: eece4d2ab9d2 ("net: ena: add ethtool function for changing io queue sizes")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently pointer hwdev is dereferenced when assigning hwif before
hwdev is null checked. Fix this by only derefencing hwdev after the
null check.
Addresses-Coverity: ("Dereference before null check")
Fixes: 4fdc51bb4e92 ("hinic: add support for rss parameters with ethtool")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
René van Dorst says:
====================
net: mediatek: Add MT7621 TRGMII mode support
Like many other mediatek SOCs, the MT7621 SOC and the internal MT7530
switch both supports TRGMII mode. MT7621 TRGMII speed is fix 1200MBit.
v1->v2:
- Fix breakage on non MT7621 SOC
- Support 25MHz and 40MHz XTAL as MT7530 clocksource
====================
Tested-by: "Frank Wunderlich" <frank-w@public-files.de>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch add support TRGMII mode for MT7621 internal MT7530 switch.
MT7621 TRGMII has only one fix speed mode of 1200MBit.
Also adding support for mt7530 25MHz and 40MHz crystal clocksource.
Values are based on Banana Pi R2 bsp [1].
Don't change MT7623 registers on a MT7621 device.
[1] https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/master/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L769
Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MT7621 SOC also supports TRGMII.
TRGMII speed is 1200MBit.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ops has been iterated to first element when call pre_exit, and
it needs to restore from save_ops, not save ops to save_ops
Fixes: d7d99872c144 ("netns: add pre_exit method to struct pernet_operations")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When user space sends invalid information in RTA_MULTIPATH, the nexthop
list in ip6_route_multipath_add() is empty and 'rt_notif' is set to
NULL.
The code that emits the in-kernel notifications does not check for this
condition, which results in a NULL pointer dereference [1].
Fix this by bailing earlier in the function if the parsed nexthop list
is empty. This is consistent with the corresponding IPv4 code.
v2:
* Check if parsed nexthop list is empty and bail with extack set
[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9190 Comm: syz-executor149 Not tainted 5.2.0-rc5+ #38
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:call_fib6_multipath_entry_notifiers+0xd1/0x1a0
net/ipv6/ip6_fib.c:396
Code: 8b b5 30 ff ff ff 48 c7 85 68 ff ff ff 00 00 00 00 48 c7 85 70 ff ff
ff 00 00 00 00 89 45 88 4c 89 e0 48 c1 e8 03 4c 89 65 80 <42> 80 3c 28 00
0f 85 9a 00 00 00 48 b8 00 00 00 00 00 fc ff df 4d
RSP: 0018:ffff88809788f2c0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff11012f11e59 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88809788f390 R08: ffff88809788f8c0 R09: 000000000000000c
R10: ffff88809788f5d8 R11: ffff88809788f527 R12: 0000000000000000
R13: dffffc0000000000 R14: ffff88809788f8c0 R15: ffffffff89541d80
FS: 000055555632c880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 000000009ba7c000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ip6_route_multipath_add+0xc55/0x1490 net/ipv6/route.c:5094
inet6_rtm_newroute+0xed/0x180 net/ipv6/route.c:5208
rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5219
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:646 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:665
___sys_sendmsg+0x803/0x920 net/socket.c:2286
__sys_sendmsg+0x105/0x1d0 net/socket.c:2324
__do_sys_sendmsg net/socket.c:2333 [inline]
__se_sys_sendmsg net/socket.c:2331 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2331
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4401f9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc09fd0028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401f9
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a80
R13: 0000000000401b10 R14: 0000000000000000 R15: 0000000000000000
Reported-by: syzbot+382566d339d52cd1a204@syzkaller.appspotmail.com
Fixes: ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some changes to the TCP fastopen code to make it more robust
against future changes in the choice of key/cookie size, etc.
- Instead of keeping the SipHash key in an untyped u8[] buffer
and casting it to the right type upon use, use the correct
type directly. This ensures that the key will appear at the
correct alignment if we ever change the way these data
structures are allocated. (Currently, they are only allocated
via kmalloc so they always appear at the correct alignment)
- Use DIV_ROUND_UP when sizing the u64[] array to hold the
cookie, so it is always of sufficient size, even if
TCP_FASTOPEN_COOKIE_MAX is no longer a multiple of 8.
- Drop the 'len' parameter from the tcp_fastopen_reset_cipher()
function, which is no longer used.
- Add endian swabbing when setting the keys and calculating the hash,
to ensure that cookie values are the same for a given key and
source/destination address pair regardless of the endianness of
the server.
Note that none of these are functional changes wrt the current
state of the code, with the exception of the swabbing, which only
affects big endian systems.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor SPDX change conflict.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
Nault.
2) Don't access the DDM interface unless the transceiver implements it
in bnx2x, from Mauro S. M. Rodrigues.
3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
JingYi Hou.
4) Sign extension overflow in lio_core, from Colin Ian King.
5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.
6) Fix epollout hang in hvsock, from Sunil Muthuswamy.
7) Fix regression in default fib6_type, from David Ahern.
8) Handle memory limits in tcp_fragment more appropriately, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
tcp: refine memory limit test in tcp_fragment()
inet: clear num_timeout reqsk_alloc()
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
tun: wake up waitqueues after IFF_UP is set
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
...
|
|
Heiner Kallweit says:
====================
PCI: let pci_disable_link_state propagate errors
Drivers like r8169 rely on pci_disable_link_state() having disabled
certain ASPM link states. If OS can't control ASPM then
pci_disable_link_state() turns into a no-op w/o informing the caller.
The driver therefore may falsely assume the respective ASPM link
states are disabled. Let pci_disable_link_state() propagate errors
to the caller, enabling the caller to react accordingly.
I'd propose to let this series go through the netdev tree if the PCI
core extension is acked by the PCI people.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Certain chip version / board combinations have massive problems if
ASPM is active. If BIOS enables ASPM and doesn't let OS control it,
then we may have a problem with the current code. Therefore check the
return code of pci_disable_link_state() and don't enable ASPM in the
network chip if OS can't control ASPM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drivers may rely on pci_disable_link_state() having disabled certain
ASPM link states. If OS can't control ASPM then pci_disable_link_state()
turns into a no-op w/o informing the caller. The driver therefore may
falsely assume the respective ASPM link states are disabled.
Let pci_disable_link_state() propagate errors to the caller, enabling
the caller to react accordingly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_fragment() might be called for skbs in the write queue.
Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.
Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull rdma fixes from Doug Ledford:
"This is probably our last -rc pull request. We don't have anything
else outstanding at the moment anyway, and with the summer months on
us and people taking trips, I expect the next weeks leading up to the
merge window to be pretty calm and sedate.
This has two simple, no brainer fixes for the EFA driver.
Then it has ten not quite so simple fixes for the hfi1 driver. The
problem with them is that they aren't simply one liner typo fixes.
They're still fixes, but they're more complex issues like livelock
under heavy load where the answer was to change work queue usage and
spinlock usage to resolve the problem, or issues with orphaned
requests during certain types of failures like link down which
required some more complex work to fix too. They all look like
legitimate fixes to me, they just aren't small like I wish they were.
Summary:
- 2 minor EFA fixes
- 10 hfi1 fixes related to scaling issues"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Handle mmap insertions overflow
RDMA/efa: Fix success return value in case of error
IB/hfi1: Handle port down properly in pio
IB/hfi1: Handle wakeup of orphaned QPs for pio
IB/hfi1: Wakeup QPs orphaned on wait list after flush
IB/hfi1: Use aborts to trigger RC throttling
IB/hfi1: Create inline to get extended headers
IB/hfi1: Silence txreq allocation warnings
IB/hfi1: Avoid hardlockup with flushlist_lock
IB/hfi1: Correct tid qp rcd to match verbs context
IB/hfi1: Close PSM sdma_progress sleep window
IB/hfi1: Validate fault injection opcode user input
|
|
Pull more NFS client fixes from Anna Schumaker:
"These are mostly refcounting issues that people have found recently.
The revert fixes a suspend recovery performance issue.
- SUNRPC: Fix a credential refcount leak
- Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
- SUNRPC: Fix xps refcount imbalance on the error path
- NFS4: Only set creation opendata if O_CREAT"
* tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a credential refcount leak
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
net :sunrpc :clnt :Fix xps refcount imbalance on the error path
NFS4: Only set creation opendata if O_CREAT
|
|
GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks. This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read. This will segfault on bare metal.
This fixes commit 459e3a21535a ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code. There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.
On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.
Cc: stable@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All callers of __rpc_clone_client() pass in a value for args->cred,
meaning that the credential gets assigned and referenced in
the call to rpc_new_client().
Reported-by: Ido Schimmel <idosch@idosch.org>
Fixes: 79caa5fad47c ("SUNRPC: Cache cred of process creating the rpc_client")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Jon Hunter reports:
"I have been noticing intermittent failures with a system suspend test on
some of our machines that have a NFS mounted root file-system. Bisecting
this issue points to your commit 431235818bc3 ("SUNRPC: Declare RPC
timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does
appear to resolve the problem.
The cause of the suspend failure appears to be a long delay observed
sometimes when resuming from suspend, and this is causing our test to
timeout."
This reverts commit 431235818bc3a919ca7487500c67c3144feece80.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget
to release it before return, may lead to a memory leak.
Signed-off-by: Lin Yi <teroincn@163.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up. This leads to a crash in
current_umask().
Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull ARM fix from Russell King:
"Just one ARM fix this time around for Jason Donenfeld, fixing a
problem with the VDSO generation on big endian"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8867/1: vdso: pass --be8 to linker if necessary
|
|
Pull drm fixes from Dave Airlie:
"Just catching up on the week since back from holidays, everything
seems quite sane.
core:
- copy_to_user fix for really legacy codepaths.
vmwgfx:
- two dma fixes
- one virt hw interaction fix
i915:
- modesetting fix
- gvt fix
panfrost:
- BO unmapping fix
imx:
- image converter fixes"
* tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Don't clobber M/N values during fastset check
drm: return -EFAULT if copy_to_user() fails
drm/panfrost: Make sure a BO is only unmapped when appropriate
drm/i915/gvt: ignore unexpected pvinfo write
gpu: ipu-v3: image-convert: Fix image downsize coefficients
gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats
gpu: ipu-v3: image-convert: Fix input bytesperline width/height align
drm/vmwgfx: fix a warning due to missing dma_parms
drm/vmwgfx: Honor the sg list segment size limitation
drm/vmwgfx: Use the backdoor port if the HB port is not available
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO/counter fixes from Greg KH:
"Here are some small driver bugfixes for some staging/iio/counter
drivers.
Staging and IIO have been lumped together for a while, as those
subsystems cross the areas a log, and counter is used by IIO, so
that's why they are all in one pull request here.
These are small fixes for reported issues in some iio drivers, the
erofs filesystem, and a build issue for counter code.
All have been in linux-next with no reported issues"
* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: erofs: add requirements field in superblock
counter/ftm-quaddec: Add missing dependencies in Kconfig
staging: iio: adt7316: Fix build errors when GPIOLIB is not set
iio: temperature: mlx90632 Relax the compatibility check
iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
staging:iio:ad7150: fix threshold mode config bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.2-rc6
Nothing major, just fixes for reported issues:
- soundwire fixes
- thunderbolt fixes
- MAINTAINERS update for fpga maintainer change
- binder bugfix
- habanalabs 64bit pointer fix
- documentation updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: use u64_to_user_ptr() for reading user pointers
doc: fix documentation about UIO_MEM_LOGICAL using
MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
docs: fb: Add TER16x32 to the available font names
MAINTAINERS: fpga: hand off maintainership to Moritz
thunderbolt: Implement CIO reset correctly for Titan Ridge
binder: fix possible UAF when freeing buffer
thunderbolt: Make sure device runtime resume completes before taking domain lock
soundwire: intel: set dai min and max channels correctly
soundwire: stream: fix bad unlock balance
soundwire: stream: fix out of boundary access on port properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are four small USB fixes for 5.2-rc6.
They include two xhci bugfixes, a chipidea fix, and a small dwc2 fix.
Nothing major, just nice things to get resolved for reported issues.
All have been in linux-next with no reported issues"
* tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: detect USB 3.2 capable host controllers correctly
usb: xhci: Don't try to recover an endpoint if port is in error state.
usb: dwc2: Use generic PHY width in params setup
usb: chipidea: udc: workaround for endpoint conflict issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
|
