summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-12mt76: mt7915: fix rxrate reportingRyder Lee
Avoid directly updating sinfo->rxrate from firmware since rate_info might be overwritten by wrong results even mt7915_mcu_get_rx_rate() fails check. Add more error handlings accordingly. Fixes: 11553d88d0b9 ("mt76: mt7915: query station rx rate from firmware") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1Eric Y.Y. Wong
There are two variants of TP-Link Archer T2UHP V1, which are US and UN: https://www.tp-link.com/us/support/download/archer-t2uhp/ https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/ From the driver source code provided by the vendor: https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/#Driver eric@eric-VirtualBox:~/src$ grep -n USB_DEVICE.*0x2357 DPA_mt7610u_wifi_sta_v3004_rev1_20140529/NETIF/common/rtusb_dev_id.c 45: {USB_DEVICE(0x2357,0x0105)}, /* T1Uv1 */ 46: {USB_DEVICE(0x2357,0x010B)}, /* T2UHP_UN_v1 */ 47: {USB_DEVICE(0x2357,0x0123)}, /* T2UHP_US_v1 */ eric@eric-VirtualBox:~/src$ lsusb -d 2357: Bus 001 Device 003: ID 2357:010b TP-Link WiFi eric@eric-VirtualBox:~/src$ sudo modprobe mt76x0u eric@eric-VirtualBox:~/src$ sudo sh -c "echo 2357 010b > /sys/bus/usb/drivers/mt76x0u/new_id" [snip] eric@eric-VirtualBox:~/src$ ifconfig -a enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 08:00:27:74:d9:ee txqueuelen 1000 (Ethernet) RX packets 78 bytes 16146 (16.1 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 75 bytes 8413 (8.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 56 bytes 5496 (5.4 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 56 bytes 5496 (5.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlx18d6c71b6e3e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.106 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::21c7:2d90:e47d:ee48 prefixlen 64 scopeid 0x20<link> ether 18:d6:c7:1b:6e:3e txqueuelen 1000 (Ethernet) RX packets 37 bytes 5345 (5.3 KB) RX errors 0 dropped 7 overruns 0 frame 0 TX packets 77 bytes 10513 (10.5 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eric@eric-VirtualBox:~/src$ dmesg | tail -n 30 12:51:25.551584 main Log opened 2021-03-01T12:51:25.551572000Z [ 46.855763] 12:51:25.551995 main OS Product: Linux [ 46.855838] 12:51:25.552075 main OS Release: 5.4.0-66-generic [ 46.855897] 12:51:25.552150 main OS Version: #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021 [ 46.855971] 12:51:25.552207 main Executable: /opt/VBoxGuestAdditions-6.1.16/sbin/VBoxService 12:51:25.552208 main Process ID: 898 12:51:25.552209 main Package type: LINUX_64BITS_GENERIC [ 46.858699] 12:51:25.554921 main 6.1.16 r140961 started. Verbose level = 0 [ 46.863116] 12:51:25.559319 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1) [ 140.687550] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 140.838279] usb 1-2: New USB device found, idVendor=2357, idProduct=010b, bcdDevice= 1.00 [ 140.838281] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 140.838283] usb 1-2: Product: WiFi [ 140.838284] usb 1-2: Manufacturer: MediaTek [ 140.838285] usb 1-2: SerialNumber: 1.0 [ 178.374187] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 178.378370] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 178.417507] usbcore: registered new interface driver mt76x0u [ 178.557165] usb 1-2: reset high-speed USB device number 3 using xhci_hcd [ 178.720436] mt76x0u 1-2:1.0: ASIC revision: 76100002 MAC revision: 76502000 [ 180.156077] mt76x0u 1-2:1.0: EEPROM ver:02 fae:04 [ 181.190558] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 181.225560] mt76x0u 1-2:1.0 wlx18d6c71b6e3e: renamed from wlan0 [ 188.660826] wlx18d6c71b6e3e: authenticate with d0:17:c2:e0:d7:9c [ 189.447781] wlx18d6c71b6e3e: send auth to d0:17:c2:e0:d7:9c (try 1/3) [ 189.618282] wlx18d6c71b6e3e: authenticated [ 189.619008] wlx18d6c71b6e3e: associate with d0:17:c2:e0:d7:9c (try 1/3) [ 189.715268] wlx18d6c71b6e3e: RX AssocResp from d0:17:c2:e0:d7:9c (capab=0x1011 status=0 aid=8) [ 189.734720] wlx18d6c71b6e3e: associated [ 190.233239] IPv6: ADDRCONF(NETDEV_CHANGE): wlx18d6c71b6e3e: link becomes ready Signed-off-by: Eric Y.Y. Wong <eric.wongyeungyan@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix PHY mode for DBDCRyder Lee
Fix PHY mode configuration for DBDC. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: stop ext_phy queue when mac reset happensRyder Lee
Stop Tx burst for ext_phy after mac reset. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix CSA notification for DBDCRyder Lee
Add CSA notification for second phy. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: stop ext_phy queue when mac reset happensRyder Lee
Stop Tx burst for ext_phy after mac reset. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix CSA notification for DBDCRyder Lee
Add CSA notification for second phy. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: add missing capabilities for DBDCRyder Lee
This improves dbdc performance. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: check mcu returned values in mt7921_startLorenzo Bianconi
Properly check returned values from mcu utility routines in mt7921_start. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix the base of the dynamic remapSean Wang
We should change the base for the dynamic remap into another one, because the current base (0xe0000) have been the one used to operate the device ownership. Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix the base of PCIe interruptSean Wang
Should use 0x10000 as the base to operate PCIe interrupt according to the vendor reference driver. Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: get rid of mt7921_sta_rc_update routineLorenzo Bianconi
Since the rate selection is currently managed by the fw, get rid of empty mt7921_sta_rc_update routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_listLorenzo Bianconi
Since mt76_txq_send_burst routine can report a negative error code, check the returned value before incrementing the number of transmitted frames in mt76_txq_schedule_list routine. Return -EBUSY directly if the device is in reset or in power management. Fixes: 90fdc1717b186 ("mt76: use mac80211 txq scheduling") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: connac: fix kernel warning adding monitor interfaceLorenzo Bianconi
Fix the following kernel warning adding a monitor interface in mt76_connac_mcu_uni_add_dev routine. [ 507.984882] ------------[ cut here ]------------ [ 507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0 [ 508.065461] Hardware name: MT7622_MT7531 RFB (DT) [ 508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.087367] sp : ffffffc013a33930 [ 508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0 [ 508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008 [ 508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610 [ 508.106577] x23: ffffff801d022990 x22: ffffff801d024de8 [ 508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8 [ 508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000 [ 508.122482] x17: 00000000ffffffff x16: 0000000000000000 [ 508.127785] x15: 0000000000000080 x14: ffffff801d704000 [ 508.133087] x13: 0000000000000040 x12: 0000000000000002 [ 508.138389] x11: 000000000000000c x10: 0000000000000000 [ 508.143691] x9 : 0000000000000020 x8 : 0000000000000001 [ 508.148992] x7 : 0000000000000000 x6 : 0000000000000000 [ 508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006 [ 508.159596] x3 : 0000000000000001 x2 : 0000000000000000 [ 508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0 [ 508.170200] Call trace: [ 508.172640] mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.179159] mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.184394] drv_add_interface+0x34/0x88 [mac80211] [ 508.189271] ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211] [ 508.195277] ieee80211_do_open+0x86c/0x918 [mac80211] [ 508.200328] ieee80211_do_open+0x900/0x918 [mac80211] [ 508.205372] __dev_open+0xcc/0x150 [ 508.208763] __dev_change_flags+0x134/0x198 [ 508.212937] dev_change_flags+0x20/0x60 [ 508.216764] devinet_ioctl+0x3e8/0x748 [ 508.220503] inet_ioctl+0x1e4/0x350 [ 508.223983] sock_do_ioctl+0x48/0x2a0 [ 508.227635] sock_ioctl+0x310/0x4f8 [ 508.231116] do_vfs_ioctl+0xa4/0xac0 [ 508.234681] ksys_ioctl+0x44/0x90 [ 508.237985] __arm64_sys_ioctl+0x1c/0x48 [ 508.241901] el0_svc_common.constprop.1+0x7c/0x100 [ 508.246681] el0_svc_handler+0x18/0x20 [ 508.250421] el0_svc+0x8/0x1c8 [ 508.253465] ---[ end trace c7b90fee13d72c39 ]--- [ 508.261278] ------------[ cut here ]------------ Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix mib stats counter reporting to mac80211Ryder Lee
In order to properly report MIB counters to mac80211, resets stats in mt7915_get_stats routine() and hold mt76 mutex accessing MIB counters. Sum up MIB counters in mt7915_mac_update_mib_stats routine. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix mib stats counter reporting to mac80211Lorenzo Bianconi
In order to properly report MIB counters to mac80211, resets stats in mt7615_get_stats routine and hold mt76 mutex accessing MIB counters. Sum up MIB counters in mt7615_mac_update_mib_stats routine. Fixes: c388d8584bc83 ("mt76: mt7615: add a get_stats() callback") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: remove hdr->fw_ver checkRyder Lee
Only mt7615 uses v1 version. Also, some of released firmware doesn't have hdr->fw_ver. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix TSF configurationRyder Lee
The index of TSF counters should follow HWBSSID. Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix stats register definitionsLorenzo Bianconi
Fix register definitions for mac80211 stats reporting. Move mib counter reset to mt7921_get_stats routine. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: remove unneeded semicolonJiapeng Chong
Fix the following coccicheck warnings: ./drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1402:2-3: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix aggr len debugfs nodeLorenzo Bianconi
Similar to mt7921, fix 802.11 aggr len debugfs reporting for mt7915 driver. Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix aggr length histogramLorenzo Bianconi
Fix register definitions for 802.11 aggr length histogram estimation. Fixes: 474a9f21e2e2 ("mt76: mt7921: add debugfs support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix memory leak in mt7615_coredump_workLorenzo Bianconi
Similar to the issue fixed in mt7921_coredump_work, fix a possible memory leak in mt7615_coredump_work routine. Fixes: d2bf7959d9c0f ("mt76: mt7663: introduce coredump support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: add support for rx decapsulation offloadRyder Lee
For AP and Client mode, the hardware can pass received packets as 802.3 frames that can be passed to the network stack as-is. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: add rx checksum offload supportRyder Lee
Set skb->ip_summed to CHECKSUM_UNNECESSARY if the hardware has validated the IP and TCP/UDP checksum Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: enable hw rx-amsdu de-aggregationRyder Lee
Enable hw rx-amsdu de-aggregation support. This is a preliminary patch to enable rx checksum offload. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: use threaded NAPIFelix Fietkau
With threaded NAPI, the rx handler function is no longer bound to the CPU that fired the interrupt, which significantly helps to spread the workload over multiple CPUs, especially when multiple devices are using threaded NAPI at the same time. Exclude the tx handler from threaded NAPI by using a separate dummy netdev. The work is small and short-lived enough that it makes more sense to run it in softirq instead of creating a dedicated thread Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: connac: update sched_scan cmd usageSean Wang
Update sched_scan command usage according to the current firmware submitted into linux-firmware.git. Fixes: 80fc1e37c0eb ("mt76: mt7921: rely on mt76_connac_mcu module for sched_scan and hw_scan") Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: add flush operationSean Wang
add flush operation to make sure cfg80211_mlme_deauth is able to flush the deauthtication frame into air immediately. Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fixup rx bitrate statisticsSean Wang
Since the related rx bitrate fields have been moved to group3 in Rxv, fix rx bitrate statistics in mt7921_mac_fill_rx routine. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bssSean Wang
Use proper value for ht40 mode configuration in mt76_connac_mcu_uni_add_bss routine and not ht20 one Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library") Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: switch to new api for hardware beacon filterSean Wang
Current firmware only supports new api for enabling hardware beacon filter. Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support") Beacon filter cmd have to rely on the associatied access point's beacon interval and DTIM information. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix memory leak in mt7921_coredump_workSean Wang
Fix possible memory leak in mt7921_coredump_work. Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix suspend/resume sequenceSean Wang
Any pcie access should happen in pci D0 state and we should give ownership back to the device at the end of the suspend procedure. Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open codedRyder Lee
Use PCI standard defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: always check return value from mt7915_mcu_alloc_wtbl_reqLorenzo Bianconi
As done for mt76_connac_mcu_alloc_wtbl_req, even if this is not a real bug since mt7915_mcu_alloc_wtbl_req routine can fails just if nskb is NULL, always check return value from mt7915_mcu_alloc_wtbl_req in order to avoid possible future mistake. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: connac: always check return value from mt76_connac_mcu_alloc_wtbl_reqLorenzo Bianconi
Even if this is not a real bug since mt76_connac_mcu_alloc_wtbl_req routine can fails just if nskb is NULL , always check return value from mt76_connac_mcu_alloc_wtbl_req in order to avoid possible future mistake. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt76x0: disable GTK offloadingDavid Bauer
When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE), only the first one to be created will transmit properly encrypteded frames. All subsequently created VAPs will sent out frames with the payload left unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially disclosing information to a third party. Disable GTK offloading and encrypt these frames in software to circumvent this issue. THis only seems to be necessary on MT7610 chips, as MT7612 is not affected from our testing. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: always use WTBL_MAX_SIZE for tlv allocationRyder Lee
Simplify WTBL defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7921: removed unused definitions in mcu.hLorenzo Bianconi
Get rid of the following definitions in mt7921/mcu.h since they are not actually used: - MT7921_WTBL_UPDATE_MAX_SIZE - MT7921_STA_UPDATE_MAX_SIZE - MT7921_WTBL_UPDATE_BA_SIZE Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7921: remove unnecessary variableNigel Christian
In mt7921_pm_set() the variable "ret" is initialized to zero and then returned. Remove it and return zero. Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7921: enable random mac addr during scanningLorenzo Bianconi
Notify mac80211 mt7921 devices support random mac address during hw frequency scanning Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7615: support loading EEPROM for MT7613BESander Vanheule
EEPROM blobs for MT7613BE radios start with (little endian) 0x7663, which is also the PCI device ID for this device. The EEPROM is required for the radio to work at useful power levels, otherwise only the lowest power level is available. Suggested-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: fix tx skb dma unmapFelix Fietkau
The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries Reported-by: Ben Greear <greearb@candelatech.com> Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7615: fix tx skb dma unmapFelix Fietkau
The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7615: fix key set/delete issuesFelix Fietkau
There were multiple issues in the current key set/remove code: - deleting a key with the previous key index deletes the current key - BIP key would only be uploaded correctly initially and corrupted on rekey Rework the code to better keep track of multiple keys and check for the key index before deleting the current key Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: add support for rx decapsulation offloadFelix Fietkau
For AP and Client mode, the hardware can pass received packets as 802.3 frames that can be passed to the network stack as-is. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: add rx checksum offload supportFelix Fietkau
Set skb->ip_summed to CHECKSUM_UNNECESSARY if the hardware has validated the IP and TCP/UDP checksum Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: enable hw rx-amsdu de-aggregationLorenzo Bianconi
Enable hw rx-amsdu de-aggregation support available in 7915 devices. This is a preliminary patch to enable rx checksum offload Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: add support for 802.3 rx framesFelix Fietkau
Do not try to access the header when receiving them Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-04-07 17:11:10 +0000