summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-05rtc: pcf2127: Fix typo in commentHugo Villeneuve
Replace TFS2 with TSF2. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211207215626.2619819-1-hugo@hugovil.com
2022-01-05dt-bindings: rtc: Add Sunplus RTC json-schemaVincent Shih
Add Sunplus RTC json-schema Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1638517579-10316-3-git-send-email-vincent.sunplus@gamil.com
2022-01-05rtc: Add driver for RTC in Sunplus SP7021Vincent Shih
Add driver for RTC in Sunplus SP7021 Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1638517579-10316-2-git-send-email-vincent.sunplus@gamil.com
2022-01-05rtc: rs5c372: fix incorrect oscillation value on r2221tlCamel Guo
The XSL bit only exists in RS5C372A/B. On other Ricoh RTC chips supported in rs5c372, this bit has different meaning. For example, on R2221x and R2223x, this bit of oscillation adjustment register determines the operation frequency of oscillation adjustment circuit and the oscillation is always 32768HZ. But rs5c372_get_trim gives 32000HZ to osc when DEV is 1. Signed-off-by: Camel Guo <camelg@axis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211206125832.6461-1-camel.guo@axis.com
2022-01-04rtc: rs5c372: add offset correction supportCamel Guo
In order for linux userspace application to be able to adjust offset to keep rtc precision as high as possible, this commit adds support of offset correction by adjusting the time trimming register on rs5c372[a|b] and oscilluation adjustment register on r2025x, r222[1|3]x, rv5c38[6|7]a. Signed-off-by: Camel Guo <camelg@axis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211202152252.31264-1-camel.guo@axis.com
2021-12-16rtc: cmos: avoid UIP when writing alarm timeMateusz Jończyk
Some Intel chipsets disconnect the time and date RTC registers when the clock update is in progress: during this time reads may return bogus values and writes fail silently. This includes the RTC alarm registers. [1] cmos_set_alarm() did not take account for that, fix it. [1] 7th Generation Intel ® Processor Family I/O for U/Y Platforms [...] Datasheet, Volume 1 of 2 (Intel's Document Number: 334658-006) Page 208 https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/7th-and-8th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.pdf "If a RAM read from the ten time and date bytes is attempted during an update cycle, the value read do not necessarily represent the true contents of those locations. Any RAM writes under the same conditions are ignored." Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-10-mat.jonczyk@o2.pl
2021-12-16rtc: cmos: avoid UIP when reading alarm timeMateusz Jończyk
Some Intel chipsets disconnect the time and date RTC registers when the clock update is in progress: during this time reads may return bogus values and writes fail silently. This includes the RTC alarm registers. [1] cmos_read_alarm() did not take account for that, which caused alarm time reads to sometimes return bogus values. This can be shown with a test patch that I am attaching to this patch series. Fix this, by using mc146818_avoid_UIP(). [1] 7th Generation Intel ® Processor Family I/O for U/Y Platforms [...] Datasheet, Volume 1 of 2 (Intel's Document Number: 334658-006) Page 208 https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/7th-and-8th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.pdf "If a RAM read from the ten time and date bytes is attempted during an update cycle, the value read do not necessarily represent the true contents of those locations. Any RAM writes under the same conditions are ignored." Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-9-mat.jonczyk@o2.pl
2021-12-16rtc: mc146818-lib: refactor mc146818_does_rtc_workMateusz Jończyk
Refactor mc146818_does_rtc_work() so that it uses mc146818_avoid_UIP(). It is enough to call mc146818_avoid_UIP() with no callback. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-8-mat.jonczyk@o2.pl
2021-12-16rtc: mc146818-lib: refactor mc146818_get_timeMateusz Jończyk
Refactor mc146818_get_time() so that it uses mc146818_avoid_UIP(). Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-7-mat.jonczyk@o2.pl
2021-12-16rtc: mc146818-lib: extract mc146818_avoid_UIPMateusz Jończyk
Function mc146818_get_time() contains an elaborate mechanism of reading the RTC time while no RTC update is in progress. It turns out that reading the RTC alarm clock also requires avoiding the RTC update. Therefore, the mechanism in mc146818_get_time() should be reused - so extract it into a separate function. The logic in mc146818_avoid_UIP() is same as in mc146818_get_time() except that after every if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) { there is now "mdelay(1)". To avoid producing a very unreadable patch, mc146818_get_time() will be refactored to use mc146818_avoid_UIP() in the next patch. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-6-mat.jonczyk@o2.pl
2021-12-16rtc: mc146818-lib: fix RTC presence checkMateusz Jończyk
To prevent an infinite loop in mc146818_get_time(), commit 211e5db19d15 ("rtc: mc146818: Detect and handle broken RTCs") added a check for RTC availability. Together with a later fix, it checked if bit 6 in register 0x0d is cleared. This, however, caused a false negative on a motherboard with an AMD SB710 southbridge; according to the specification [1], bit 6 of register 0x0d of this chipset is a scratchbit. This caused a regression in Linux 5.11 - the RTC was determined broken by the kernel and not used by rtc-cmos.c [3]. This problem was also reported in Fedora [4]. As a better alternative, check whether the UIP ("Update-in-progress") bit is set for longer then 10ms. If that is the case, then apparently the RTC is either absent (and all register reads return 0xff) or broken. Also limit the number of loop iterations in mc146818_get_time() to 10 to prevent an infinite loop there. The functions mc146818_get_time() and mc146818_does_rtc_work() will be refactored later in this patch series, in order to fix a separate problem with reading / setting the RTC alarm time. This is done so to avoid a confusion about what is being fixed when. In a previous approach to this problem, I implemented a check whether the RTC_HOURS register contains a value <= 24. This, however, sometimes did not work correctly on my Intel Kaby Lake laptop. According to Intel's documentation [2], "the time and date RAM locations (0-9) are disconnected from the external bus" during the update cycle so reading this register without checking the UIP bit is incorrect. [1] AMD SB700/710/750 Register Reference Guide, page 308, https://developer.amd.com/wordpress/media/2012/10/43009_sb7xx_rrg_pub_1.00.pdf [2] 7th Generation Intel ® Processor Family I/O for U/Y Platforms [...] Datasheet Volume 1 of 2, page 209 Intel's Document Number: 334658-006, https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/7th-and-8th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.pdf [3] Functions in arch/x86/kernel/rtc.c apparently were using it. [4] https://bugzilla.redhat.com/show_bug.cgi?id=1936688 Fixes: 211e5db19d15 ("rtc: mc146818: Detect and handle broken RTCs") Fixes: ebb22a059436 ("rtc: mc146818: Dont test for bit 0-5 in Register D") Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-5-mat.jonczyk@o2.pl
2021-12-16rtc: Check return value from mc146818_get_time()Mateusz Jończyk
There are 4 users of mc146818_get_time() and none of them was checking the return value from this function. Change this. Print the appropriate warnings in callers of mc146818_get_time() instead of in the function mc146818_get_time() itself, in order not to add strings to rtc-mc146818-lib.c, which is kind of a library. The callers of alpha_rtc_read_time() and cmos_read_time() may use the contents of (struct rtc_time *) even when the functions return a failure code. Therefore, set the contents of (struct rtc_time *) to 0x00, which looks more sensible then 0xff and aligns with the (possibly stale?) comment in cmos_read_time: /* * If pm_trace abused the RTC for storage, set the timespec to 0, * which tells the caller that this RTC value is unusable. */ For consistency, do this in mc146818_get_time(). Note: hpet_rtc_interrupt() may call mc146818_get_time() many times a second. It is very unlikely, though, that the RTC suddenly stops working and mc146818_get_time() would consistently fail. Only compile-tested on alpha. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-alpha@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-4-mat.jonczyk@o2.pl
2021-12-16rtc: mc146818-lib: change return values of mc146818_get_time()Mateusz Jończyk
No function is checking mc146818_get_time() return values yet, so correct them to make them more customary. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-3-mat.jonczyk@o2.pl
2021-12-16rtc: cmos: take rtc_lock while reading from CMOSMateusz Jończyk
Reading from the CMOS involves writing to the index register and then reading from the data register. Therefore access to the CMOS has to be serialized with rtc_lock. This invocation of CMOS_READ was not serialized, which could cause trouble when other code is accessing CMOS at the same time. Use spin_lock_irq() like the rest of the function. Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a separate pair of spin_lock_irq() / spin_unlock_irq() before doing the math. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl
2021-12-16powerpc: wii_defconfig: Enable the RTC driverEmmanuel Gil Peyrot
This selects the rtc-gamecube driver, which provides a real-time clock on this platform. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211215175501.6761-6-linkmauve@linkmauve.fr
2021-12-16powerpc: gamecube_defconfig: Enable the RTC driverEmmanuel Gil Peyrot
This selects the rtc-gamecube driver, which provides a real-time clock on this platform. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211215175501.6761-5-linkmauve@linkmauve.fr
2021-12-16powerpc: wii.dts: Expose HW_SRNPROT on this platformEmmanuel Gil Peyrot
This Hollywood register isn’t properly understood, but can allow or reject access to the SRAM, which we need to set for RTC usage if it isn’t previously set correctly beforehand. See https://wiibrew.org/wiki/Hardware/Hollywood_Registers#HW_SRNPROT Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211215175501.6761-4-linkmauve@linkmauve.fr
2021-12-16rtc: gamecube: Report low battery as invalid dataEmmanuel Gil Peyrot
I haven’t been able to test this patch as all of my consoles have a working RTC battery, but according to the documentation it should work like that. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211215175501.6761-3-linkmauve@linkmauve.fr
2021-12-16rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii UEmmanuel Gil Peyrot
These three consoles share a device, the MX23L4005, which contains a clock and 64 bytes of SRAM storage, and is exposed on the EXI bus (similar to SPI) on channel 0, device 1. This driver allows it to be used as a Linux RTC device, where time can be read and set. The hardware also exposes two timers, one which shuts down the console and one which powers it on, but these aren’t supported currently. On the Wii U, the counter bias is stored in a XML file, /config/rtc.xml, encrypted in the SLC (eMMC storage), using a proprietary filesystem. In order to avoid having to implement all that, this driver assumes a bootloader will parse this XML file and write the bias into the SRAM, at the same location the other two consoles have it. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211215175501.6761-2-linkmauve@linkmauve.fr
2021-12-02rtc: rv8803: Add support for the Epson RX8804 RTCFabio Estevam
The Epson RX8804 RTC has the same programming model as RV8803. Add support for it in the driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211130125830.1166194-2-festevam@gmail.com
2021-12-02dt/bindings: rtc: rx8900: Add an entry for RX8804Fabio Estevam
The Epson RX8804 RTC has the same programming model as RV8803 and RX8900. Add an entry for it in the binding document. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211130125830.1166194-1-festevam@gmail.com
2021-12-02rtc: da9063: add as wakeup sourceNikita Shubin
As da9063 RTC is not a real I2C client, but relies on da9063 MFD driver, we need to explicitly mark da9063 RTC as a wakeup source to be able to access class/rtc/rtcN/wakealarm sysfs entry to set alarms, so we can wakeup from SHUTDOWN/RTC/DELIVERY mode. As da9063 driver refuses to load without irq, we simply add it as a wakeup source before registering rtc device. Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211129072650.22686-1-nikita.shubin@maquefel.me
2021-12-01rtc: da9063: switch to RTC_FEATURE_UPDATE_INTERRUPTAlexandre Belloni
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Also, let the core know that the alarm will truncate seconds as it only has a minute resolution. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20211109234750.107115-1-alexandre.belloni@bootlin.com
2021-12-01rtc: pcf85063: add i2c_device_id name matching supportMarc Ferland
The pcf85063 driver regsitration currently supports the "compatible" property type of matching (for DT). This patch adds "matching by name" support to the driver by defining an i2c_device_id table and setting the id_table parameter in the i2c_driver struct. This will, for example, make the driver easier to instantiate on systems where CONFIG_OF is not enabled (x86 in my case). Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211116164733.17149-1-ferlandm@amotus.ca
2021-12-01rtc: rs5c372: Add RTC_VL_READ, RTC_VL_CLR ioctlsCamel Guo
In order to make it possible to get battery voltage status, this commit adds RTC_VL_READ, RTC_VL_CLR ioctl commands to rtc-rs5c372. Signed-off-by: Camel Guo <camelg@axis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211111083625.10216-1-camel.guo@axis.com
2021-11-14Linux 5.16-rc1Linus Torvalds
2021-11-14kconfig: Add support for -Wimplicit-fallthroughGustavo A. R. Silva
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236 Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-14Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs cleanups from Darrick Wong: "The most 'exciting' aspect of this branch is that the xfsprogs maintainer and I have worked through the last of the code discrepancies between kernel and userspace libxfs such that there are no code differences between the two except for #includes. IOWs, diff suffices to demonstrate that the userspace tools behave the same as the kernel, and kernel-only bits are clearly marked in the /kernel/ source code instead of just the userspace source. Summary: - Clean up open-coded swap() calls. - A little bit of #ifdef golf to complete the reunification of the kernel and userspace libxfs source code" * tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: sync xfs_btree_split macros with userspace libxfs xfs: #ifdef out perag code for userspace xfs: use swap() to make dabtree code cleaner
2021-11-14Merge tag 'for-5.16/parisc-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc fixes from Helge Deller: "Fix a build error in stracktrace.c, fix resolving of addresses to function names in backtraces, fix single-stepping in assembly code and flush userspace pte's when using set_pte_at()" * tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/entry: fix trace test in syscall exit path parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page parisc: Fix implicit declaration of function '__kernel_text_address' parisc: Fix backtrace to always include init funtion names
2021-11-14Merge tag 'sh-for-5.16' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker. * tag 'sh-for-5.16' of git://git.libc.org/linux-sh: sh: pgtable-3level: Fix cast to pointer from integer of different size sh: fix READ/WRITE redefinition warnings sh: define __BIG_ENDIAN for math-emu sh: math-emu: drop unused functions sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: Cleanup about SPARSE_IRQ sh: kdump: add some attribute to function maple: fix wrong return value of maple_bus_init(). sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/ sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y sh: boards: Fix the cacography in irq.c sh: check return code of request_irq sh: fix trivial misannotations
2021-11-14Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap()
2021-11-14Merge tag 'devicetree-fixes-for-5.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Two fixes due to DT node name changes on Arm, Ltd. boards - Treewide rename of Ingenic CGU headers - Update ST email addresses - Remove Netlogic DT bindings - Dropping few more cases of redundant 'maxItems' in schemas - Convert toshiba,tc358767 bridge binding to schema * tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: watchdog: sunxi: fix error in schema bindings: media: venus: Drop redundant maxItems for power-domain-names dt-bindings: Remove Netlogic bindings clk: versatile: clk-icst: Ensure clock names are unique of: Support using 'mask' in making device bus id dt-bindings: treewide: Update @st.com email address to @foss.st.com dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml dt-bindings: media: Update maintainers for st,stm32-cec.yaml dt-bindings: mfd: timers: Update maintainers for st,stm32-timers dt-bindings: timer: Update maintainers for st,stm32-timer dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14Merge tag 'timers-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for POSIX CPU timers to address a problem where POSIX CPU timer delivery stops working for a new child task because copy_process() copies state information which is only valid for the parent task" * tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-14Merge tag 'irq-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
2021-11-14Merge tag 'locking-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 static call update from Thomas Gleixner: "A single fix for static calls to make the trampoline patching more robust by placing explicit signature bytes after the call trampoline to prevent patching random other jumps like the CFI jump table entries" * tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call,x86: Robustify trampoline patching
2021-11-14Merge tag 'sched_urgent_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Avoid touching ~100 config files in order to be able to select the preemption model - clear cluster CPU masks too, on the CPU unplug path - prevent use-after-free in cfs - Prevent a race condition when updating CPU cache domains - Factor out common shared part of smp_prepare_cpus() into a common helper which can be called by both baremetal and Xen, in order to fix a booting of Xen PV guests * tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Restore preemption model selection configs arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology() sched/fair: Prevent dead task groups from regaining cfs_rq's sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() x86/smp: Factor out parts of native_smp_prepare_cpus()
2021-11-14Merge tag 'perf_urgent_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent unintentional page sharing by checking whether a page reference to a PMU samples page has been acquired properly before that - Make sure the LBR_SELECT MSR is saved/restored too - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any residual data left * tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Avoid put_page() when GUP fails perf/x86/vlbr: Add c->flags to vlbr event constraints perf/x86/lbr: Reset LBR_SELECT during vlbr reset
2021-11-14Merge tag 'x86_urgent_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add the model number of a new, Raptor Lake CPU, to intel-family.h - Do not log spurious corrected MCEs on SKL too, due to an erratum - Clarify the path of paravirt ops patches upstream - Add an optimization to avoid writing out AMX components to sigframes when former are in init state * tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Raptor Lake to Intel family x86/mce: Add errata workaround for Skylake SKX37 MAINTAINERS: Add some information to PARAVIRT_OPS entry x86/fpu: Optimize out sigframe xfeatures when in init state
2021-11-14Merge tag 'perf-tools-for-v5.16-2021-11-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: "Hardware tracing: - ARM: * Print the size of the buffer size consistently in hexadecimal in ARM Coresight. * Add Coresight snapshot mode support. * Update --switch-events docs in 'perf record'. * Support hardware-based PID tracing. * Track task context switch for cpu-mode events. - Vendor events: * Add metric events JSON file for power10 platform perf test: - Get 'perf test' unit tests closer to kunit. - Topology tests improvements. - Remove bashisms from some tests. perf bench: - Fix memory leak of perf_cpu_map__new() in the futex benchmarks. libbpf: - Add some more weak libbpf functions o allow building with the libbpf versions, old ones, present in distros. libbeauty: - Translate [gs]setsockopt 'level' argument integer values to strings. tools headers UAPI: - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files with the kernel sources. Documentation: - Add documentation to 'struct symbol'. - Synchronize the definition of enum perf_hw_id with code in tools/perf/design.txt" * tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits) perf tests: Remove bash constructs from stat_all_pmu.sh perf tests: Remove bash construct from record+zstd_comp_decomp.sh perf test: Remove bash construct from stat_bpf_counters.sh test perf bench futex: Fix memory leak of perf_cpu_map__new() tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync sound/asound.h with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources perf tools: Add more weak libbpf functions perf bpf: Avoid memory leak from perf_env__insert_btf() perf symbols: Factor out annotation init/exit perf symbols: Bit pack to save a byte perf symbols: Add documentation to 'struct symbol' tools headers UAPI: Sync files changed by new futex_waitv syscall perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning perf arm-spe: Support hardware-based PID tracing perf arm-spe: Save context ID in record perf arm-spe: Update --switch-events docs in 'perf record' perf arm-spe: Track task context switch for cpu-mode events ...
2021-11-14Merge tag 'irqchip-fixes-5.16-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Address an issue with the SiFive PLIC being unable to EOI a masked interrupt - Move the disable/enable methods in the CSky mpintc to mask/unmask - Fix a regression in the OF irq code where an interrupt-controller property in the same node as an interrupt-map property would get ignored Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org
2021-11-13Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linuxLinus Torvalds
Pull zstd update from Nick Terrell: "Update to zstd-1.4.10. Add myself as the maintainer of zstd and update the zstd version in the kernel, which is now 4 years out of date, to a much more recent zstd release. This includes bug fixes, much more extensive fuzzing, and performance improvements. And generates the kernel zstd automatically from upstream zstd, so it is easier to keep the zstd verison up to date, and we don't fall so far out of date again. This includes 5 commits that update the zstd library version: - Adds a new kernel-style wrapper around zstd. This wrapper API is functionally equivalent to the subset of the current zstd API that is currently used. The wrapper API changes to be kernel style so that the symbols don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same API and preserves the semantics, so that none of the callers need to be updated. All callers are updated in the commit, because there are zero functional changes. - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't depend on the layout of `lib/zstd/` to include every source file. This allows the next patch to be automatically generated. - Imports the zstd-1.4.10 source code. This commit is automatically generated from upstream zstd (https://github.com/facebook/zstd). - Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`. - Fixes a newly added build warning for clang. The discussion around this patchset has been pretty long, so I've included a FAQ-style summary of the history of the patchset, and why we are taking this approach. Why do we need to update? ------------------------- The zstd version in the kernel is based off of zstd-1.3.1, which is was released August 20, 2017. Since then zstd has seen many bug fixes and performance improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to older versions. So the only way to sanely get these fixes is to keep up to date with upstream zstd. There are no known security issues that affect the kernel, but we need to be able to update in case there are. And while there are no known security issues, there are relevant bug fixes. For example the problem with large kernel decompression has been fixed upstream for over 2 years [1] Additionally the performance improvements for kernel use cases are significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz: - BtrFS zstd compression at levels 1 and 3 is 5% faster - BtrFS zstd decompression+read is 15% faster - SquashFS zstd decompression+read is 15% faster - F2FS zstd compression+write at level 3 is 8% faster - F2FS zstd decompression+read is 20% faster - ZRAM decompression+read is 30% faster - Kernel zstd decompression is 35% faster - Initramfs zstd decompression+build is 5% faster On top of this, there are significant performance improvements coming down the line in the next zstd release, and the new automated update patch generation will allow us to pull them easily. How is the update patch generated? ---------------------------------- The first two patches are preparation for updating the zstd version. Then the 3rd patch in the series imports upstream zstd into the kernel. This patch is automatically generated from upstream. A script makes the necessary changes and imports it into the kernel. The changes are: - Replace all libc dependencies with kernel replacements and rewrite includes. - Remove unncessary portability macros like: #if defined(_MSC_VER). - Use the kernel xxhash instead of bundling it. This automation gets tested every commit by upstream's continuous integration. When we cut a new zstd release, we will submit a patch to the kernel to update the zstd version in the kernel. The automated process makes it easy to keep the kernel version of zstd up to date. The current zstd in the kernel shares the guts of the code, but has a lot of API and minor changes to work in the kernel. This is because at the time upstream zstd was not ready to be used in the kernel envrionment as-is. But, since then upstream zstd has evolved to support being used in the kernel as-is. Why are we updating in one big patch? ------------------------------------- The 3rd patch in the series is very large. This is because it is restructuring the code, so it both deletes the existing zstd, and re-adds the new structure. Future updates will be directly proportional to the changes in upstream zstd since the last import. They will admittidly be large, as zstd is an actively developed project, and has hundreds of commits between every release. However, there is no other great alternative. One option ruled out is to replay every upstream zstd commit. This is not feasible for several reasons: - There are over 3500 upstream commits since the zstd version in the kernel. - The automation to automatically generate the kernel update was only added recently, so older commits cannot easily be imported. - Not every upstream zstd commit builds. - Only zstd releases are "supported", and individual commits may have bugs that were fixed before a release. Another option to reduce the patch size would be to first reorganize to the new file structure, and then apply the patch. However, the current kernel zstd is formatted with clang-format to be more "kernel-like". But, the new method imports zstd as-is, without additional formatting, to allow for closer correlation with upstream, and easier debugging. So the patch wouldn't be any smaller. It also doesn't make sense to import upstream zstd commit by commit going forward. Upstream zstd doesn't support production use cases running of the development branch. We have a lot of post-commit fuzzing that catches many bugs, so indiviudal commits may be buggy, but fixed before a release. So going forward, I intend to import every (important) zstd release into the Kernel. So, while it isn't ideal, updating in one big patch is the only patch I see forward. Who is responsible for this code? --------------------------------- I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree for zstd patches. Because of that, there were several patches that either got ignored, or took a long time to merge, since it wasn't clear which tree should pick them up. I'm officially stepping up as maintainer, and setting up my tree as the path through which zstd patches get merged. I'll make sure that patches to the kernel zstd get ported upstream, so they aren't erased when the next version update happens. How is this code tested? ------------------------ I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both performance and correctness. Also, thanks to many people in the community who have tested these patches locally. Lastly, this code will bake in linux-next before being merged into v5.16. Why update to zstd-1.4.10 when zstd-1.5.0 has been released? ------------------------------------------------------------ This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest release when it was created. Since the update patch is automatically generated from upstream, I could generate it from zstd-1.5.0. However, there were some large stack usage regressions in zstd-1.5.0, and are only fixed in the latest development branch. And the latest development branch contains some new code that needs to bake in the fuzzer before I would feel comfortable releasing to the kernel. Once this patchset has been merged, and we've released zstd-1.5.1, we can update the kernel to zstd-1.5.1, and exercise the update process. You may notice that zstd-1.4.10 doesn't exist upstream. This release is an artifical release based off of zstd-1.4.9, with some fixes for the kernel backported from the development branch. I will tag the zstd-1.4.10 release after this patchset is merged, so the Linux Kernel is running a known version of zstd that can be debugged upstream. Why was a wrapper API added? ---------------------------- The first versions of this patchset migrated the kernel to the upstream zstd API. It first added a shim API that supported the new upstream API with the old code, then updated callers to use the new shim API, then transitioned to the new code and deleted the shim API. However, Cristoph Hellwig suggested that we transition to a kernel style API, and hide zstd's upstream API behind that. This is because zstd's upstream API is supports many other use cases, and does not follow the kernel style guide, while the kernel API is focused on the kernel's use cases, and follows the kernel style guide. Where is the previous discussion? --------------------------------- Links for the discussions of the previous versions of the patch set below. The largest changes in the design of the patchset are driven by the discussions in v11, v5, and v1. Sorry for the mix of links, I couldn't find most of the the threads on lkml.org" Link: https://lkml.org/lkml/2020/9/29/27 [1] Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12] Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11] Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10] Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9] Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8] Link: https://lkml.org/lkml/2020/12/3/1195 [v7] Link: https://lkml.org/lkml/2020/12/2/1245 [v6] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5] Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4] Link: https://lkml.org/lkml/2020/9/23/1074 [v3] Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1] Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> * tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux: lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical MAINTAINERS: Add maintainer entry for zstd lib: zstd: Upgrade to latest upstream zstd version 1.4.10 lib: zstd: Add decompress_sources.h for decompress_unzstd lib: zstd: Add kernel-specific API
2021-11-13Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linuxLinus Torvalds
Pull virtio-mem update from David Hildenbrand: "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem, now that "accidential" access to logically unplugged memory inside added Linux memory blocks is no longer possible, because we: - Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove /dev/kmem for good") - Disallowed access to virtio-mem device memory via /dev/mem in commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory via /dev/mem") - Sanitized access to virtio-mem device memory via /proc/kcore in commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections, logically offline pages and hwpoisoned pages") - Sanitized access to virtio-mem device memory via /proc/vmcore in commit ce2814622e84 ("virtio-mem: kdump mode to sanitize /proc/vmcore access") The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be required by some hypervisors implementing virtio-mem in the near future, so let's support it now that we safely can" * tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux: virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
2021-11-13perf tests: Remove bash constructs from stat_all_pmu.shJames Clark
The tests were passing but without testing and were printing the following: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 51650 Testing cpu/branch-instructions/ ./tests/shell/stat_all_pmu.sh: 10: [: Performance counter stats for 'true': 137,307 cpu/branch-instructions/ 0.001686672 seconds time elapsed 0.001376000 seconds user 0.000000000 seconds sys: unexpected operator Changing the regexes to a grep works in sh and prints this: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 60186 [...] Testing tlb_flush.stlb_any test child finished with 0 ---- end ---- perf all PMU test: Ok Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13perf tests: Remove bash construct from record+zstd_comp_decomp.shJames Clark
Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390") inadvertently removed the -g flag from all platforms rather than just s390, because the [[ ]] construct fails in sh. Changing to single brackets restores testing of call graphs and removes the following error from the output: $ ./perf test -v 85 85: Zstd perf.data compression/decompression : --- start --- test child forked, pid 50643 Collecting compressed record file: ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390") Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13perf test: Remove bash construct from stat_bpf_counters.sh testJames Clark
Currently the test skips with an error because == only works in bash: $ ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 44586 ./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Changing == to = does the same thing, but doesn't result in an error: ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 45833 Skipping: --bpf-counters not supported Error: unknown option `bpf-counters' [...] test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13perf bench futex: Fix memory leak of perf_cpu_map__new()Sohaib Mohamed
ASan reports memory leaks while running: $ sudo ./perf bench futex all The leaks are caused by perf_cpu_map__new not being freed. This patch adds the missing perf_cpu_map__put since it calls cpu_map_delete implicitly. Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions") Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: dae1bd58389615d4 ("x86/msr-index: Add MSRs for XFD") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2021-07-15 16:17:01.819817827 -0300 +++ arch/x86/include/asm/msr-index.h 2021-11-06 15:49:33.738517311 -0300 @@ -625,6 +625,8 @@ #define MSR_IA32_BNDCFGS_RSVD 0x00000ffc +#define MSR_IA32_XFD 0x000001c4 +#define MSR_IA32_XFD_ERR 0x000001c5 #define MSR_IA32_XSS 0x00000da0 #define MSR_IA32_APICBASE 0x0000001b $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2021-11-13 11:10:39.964201505 -0300 +++ /tmp/after 2021-11-13 11:10:47.902410873 -0300 @@ -93,6 +93,8 @@ [0x000001b0] = "IA32_ENERGY_PERF_BIAS", [0x000001b1] = "IA32_PACKAGE_THERM_STATUS", [0x000001b2] = "IA32_PACKAGE_THERM_INTERRUPT", + [0x000001c4] = "IA32_XFD", + [0x000001c5] = "IA32_XFD_ERR", [0x000001c8] = "LBR_SELECT", [0x000001c9] = "LBR_TOS", [0x000001d9] = "IA32_DEBUGCTLMSR", $ And this gets rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Now one can trace systemwide asking to see backtraces to where those MSRs are being read/written with: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR" ^C# # If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR" <SNIP> New filter for msr:read_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781) New filter for msr:write_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781) <SNIP> ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 pipewire/2479 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) schedule_hrtimeout_range_clock ([kernel.kallsyms]) do_epoll_wait ([kernel.kallsyms]) __x64_sys_epoll_wait ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) epoll_wait (/usr/lib64/libc-2.33.so) [0x76c4] (/usr/lib64/spa-0.2/support/libspa-support.so) [0x4cf0] (/usr/lib64/spa-0.2/support/libspa-support.so) 0.027 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) start_kernel ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Borislav Petkov <bp@suse.de> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YY%2FJdb6on7swsn+C@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: e5e32171a2cf1e43 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface") 9409eb35942713d0 ("drm/i915: Expose logical engine instance to user") ea673f17ab763879 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values") d3ac8d42168a9be7 ("drm/i915/pxp: interfaces for using protected objects") cbbd3764b2399ad8 ("drm/i915/pxp: Create the arbitrary session after boot") That don't add any new ioctl, so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Huang, Sean Z <sean.z.huang@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools headers UAPI: Sync sound/asound.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: 5aec579e08e4f2be ("ALSA: uapi: Fix a C++ style comment in asound.h") That is just changing a // style comment to /* */. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools headers UAPI: Sync linux/prctl.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: 61bc346ce64a3864 ("uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument") That don't result in any changes in tooling: $ tools/perf/trace/beauty/prctl_option.sh > before $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h $ tools/perf/trace/beauty/prctl_option.sh > after $ diff -u before after $ Just silences this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h' diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-03-23 15:48:14 +0000