summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-10driver core: Add state_synced sysfs file for devices that support itSaravana Kannan
This can be used to check if a device supports sync_state() callbacks and therefore keeps resources left on by the bootloader enabled till all its consumers have probed. This can also be used to check if sync_state() has been called for a device or whether it is still trying to keep resources enabled because they were left enabled by the bootloader and all its consumers haven't probed yet. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200521191800.136035-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10driver core: Expose device link details in sysfsSaravana Kannan
It's helpful to be able to look at device link details from sysfs. So, expose it in sysfs. Say device-A is supplier of device-B. These are the additional files this patch would create: /sys/class/devlink/device-A:device-B/ auto_remove_on consumer/ -> .../device-B/ runtime_pm status supplier/ -> .../device-A/ sync_state_only /sys/devices/.../device-A/ consumer:device-B/ -> /sys/class/devlink/device-A:device-B/ /sys/devices/.../device-B/ supplier:device-A/ -> /sys/class/devlink/device-A:device-B/ That way: To get a list of all the device link in the system: ls /sys/class/devlink/ To get the consumer names and links of a device: ls -d /sys/devices/.../device-X/consumer:* To get the supplier names and links of a device: ls -d /sys/devices/.../device-X/supplier:* Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200521191800.136035-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10driver core: Drop mention of obsolete bus rwsem from kernel-docLukas Wunner
15 years ago, commit 6eded061b126 ("Fix up bus code and remove use of rwsem") removed the bus rwsem, but left over a reference to it in a kernel-doc comment. Drop it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/b1af31b0e351bcbc056fe1ec44500737a7998d43.1594210157.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10debugfs: file: Remove unnecessary cast in kfree()Xu Wang
Remove unnecassary casts in the argument to kfree. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200709054033.30148-1-vulab@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10drivers/base/memory: rename base_memory_block_id to memory_block_idWei Yang
memory_block may have a larger granularity than section, this is why we have base_section_nr. But base_memory_block_id seems a little misleading, since there is no larger granularity concept which groups several memory_block. What we need here is the exact memory_block_id to a section_nr. Let's rename it to make it more precise. Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Link: https://lore.kernel.org/r/20200623025701.2016-2-richard.weiyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10drivers/base/memory: init_memory_block() first parameter is not necessaryWei Yang
The first parameter of init_memory_block() is intended to retrieve the memory_block initiated. But now, we never use it. Drop it for now. Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Link: https://lore.kernel.org/r/20200623025701.2016-1-richard.weiyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10Documentation/driver-api: driver-model/platform: drop doubled wordRandy Dunlap
Drop the doubled word "that". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200704034502.17199-12-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10software node: Use software_node_unregister() when unregistering group of nodesAndy Shevchenko
After the commit 46d26819a505 ("software node: implement software_node_unregister()") has been applied a new helper appears that may be utilised in other places. For time being there is one such place, i.e. in software_node_unregister_node_group() which will benefit of the clean up. Use software_node_unregister() when unregistering group of nodes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200622082108.25577-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10topology: mark a function as __init to save some memoryChristophe JAILLET
'topology_sysfs_init()' is only called via 'device_initcall'. It can be marked as __init to save a few bytes of memory. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200621081106.881915-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10scripts: add dummy report mode to add_namespace.cocciMatthias Maennich
When running `make coccicheck` in report mode using the add_namespace.cocci file, it will fail for files that contain MODULE_LICENSE. Those match the replacement precondition, but spatch errors out as virtual.ns is not set. In order to fix that, add the virtual rule nsdeps and only do search and replace if that rule has been explicitly requested. In order to make spatch happy in report mode, we also need a dummy rule, as otherwise it errors out with "No rules apply". Using a script:python rule appears unrelated and odd, but this is the shortest I could come up with. Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough `make nsdeps`. Suggested-by: Julia Lawall <julia.lawall@inria.fr> Fixes: c7c4e29fb5a4 ("scripts: add_namespace: Fix coccicheck failed") Cc: YueHaibing <yuehaibing@huawei.com> Cc: jeyu@kernel.org Cc: cocci@systeme.lip6.fr Cc: stable@vger.kernel.org Signed-off-by: Matthias Maennich <maennich@google.com> Reported-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/20200604164145.173925-1-maennich@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10drivers: base: Convert to printk alias functionsMatthias Brugger
The file mixes printk calls together with calls to pr_*(). Covert to printk alias functions to unify the code. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Link: https://lore.kernel.org/r/20200608095217.21162-2-matthias.bgg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10lib: devres: add a comment about the devm_of_iomap() functionDan Carpenter
We recently introduced a bug when we tried to convert of_iomap() to devm_of_iomap(). The problem was that there were two drivers mapping the same io region. The first driver was using of_iomap() and the second driver was using devm_of_iomap() and the kernel booted fine. When we converted the first drive to use devm_of_iomap() then the second driver failed with -EBUSY and the kernel couldn't boot. Let's add a comment to prevent this sort of mistake in the future. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200609104642.GA43074@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10devres: keep both device name and resource name in pretty nameVladimir Oltean
Sometimes debugging a device is easiest using devmem on its register map, and that can be seen with /proc/iomem. But some device drivers have many memory regions. Take for example a networking switch. Its memory map used to look like this in /proc/iomem: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : sys 1fc030000-1fc03ffff : rew 1fc060000-1fc0603ff : s2 1fc070000-1fc0701ff : devcpu_gcb 1fc080000-1fc0800ff : qs 1fc090000-1fc0900cb : ptp 1fc100000-1fc10ffff : port0 1fc110000-1fc11ffff : port1 1fc120000-1fc12ffff : port2 1fc130000-1fc13ffff : port3 1fc140000-1fc14ffff : port4 1fc150000-1fc15ffff : port5 1fc200000-1fc21ffff : qsys 1fc280000-1fc28ffff : ana But after the patch in Fixes: was applied, the information is now presented in a much more opaque way: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 1fc030000-1fc03ffff : 0000:00:00.5 1fc060000-1fc0603ff : 0000:00:00.5 1fc070000-1fc0701ff : 0000:00:00.5 1fc080000-1fc0800ff : 0000:00:00.5 1fc090000-1fc0900cb : 0000:00:00.5 1fc100000-1fc10ffff : 0000:00:00.5 1fc110000-1fc11ffff : 0000:00:00.5 1fc120000-1fc12ffff : 0000:00:00.5 1fc130000-1fc13ffff : 0000:00:00.5 1fc140000-1fc14ffff : 0000:00:00.5 1fc150000-1fc15ffff : 0000:00:00.5 1fc200000-1fc21ffff : 0000:00:00.5 1fc280000-1fc28ffff : 0000:00:00.5 That patch made a fair comment that /proc/iomem might be confusing when it shows resources without an associated device, but we can do better than just hide the resource name altogether. Namely, we can print the device name _and_ the resource name. Like this: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 sys 1fc030000-1fc03ffff : 0000:00:00.5 rew 1fc060000-1fc0603ff : 0000:00:00.5 s2 1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb 1fc080000-1fc0800ff : 0000:00:00.5 qs 1fc090000-1fc0900cb : 0000:00:00.5 ptp 1fc100000-1fc10ffff : 0000:00:00.5 port0 1fc110000-1fc11ffff : 0000:00:00.5 port1 1fc120000-1fc12ffff : 0000:00:00.5 port2 1fc130000-1fc13ffff : 0000:00:00.5 port3 1fc140000-1fc14ffff : 0000:00:00.5 port4 1fc150000-1fc15ffff : 0000:00:00.5 port5 1fc200000-1fc21ffff : 0000:00:00.5 qsys 1fc280000-1fc28ffff : 0000:00:00.5 ana Fixes: 8d84b18f5678 ("devres: always use dev_name() in devm_ioremap_resource()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200601095826.1757621-1-olteanv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10driver core: platform: expose numa_node to users in sysfsBarry Song
Some platform devices like ARM SMMU are memory-mapped and populated by ACPI/IORT. In this case, NUMA topology of those platform devices are exported by firmware as well. Software might care about the numa_node of those devices in order to achieve NUMA locality. This patch will show the numa_node for this kind of devices in sysfs. For those platform devices without numa, numa_node won't be visible. Cc: Prime Zeng <prime.zeng@hisilicon.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20200619030045.81956-1-song.bao.hua@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10kobject: Avoid premature parent object freeing in kobject_cleanup()Heikki Krogerus
If kobject_del() is invoked by kobject_cleanup() to delete the target kobject, it may cause its parent kobject to be freed before invoking the target kobject's ->release() method, which effectively means freeing the parent before dealing with the child entirely. That is confusing at best and it may also lead to functional issues if the callers of kobject_cleanup() are not careful enough about the order in which these calls are made, so avoid the problem by making kobject_cleanup() drop the last reference to the target kobject's parent at the end, after invoking the target kobject's ->release() method. [ rjw: Rewrite the subject and changelog, make kobject_cleanup() drop the parent reference only when __kobject_del() has been called. ] Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: 7589238a8cf3 ("Revert "software node: Simplify software_node_release() function"") Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/1908555.IiAGLGrh1Z@kreacher Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-07driver core: platform: need consistent spacing around '-'Barry Song
Fix the below checkpatch issue: ERROR: need consistent spacing around '-' (ctx:WxV) FILE: drivers/base/platform.c:1008: + len = acpi_device_modalias(dev, buf, PAGE_SIZE -1); ^ Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20200602045556.66948-1-song.bao.hua@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03lib: update DEBUG_SHIRQ docs to match realityWolfram Sang
There is no extra interrupt when registering a shared interrupt handler since 2011. Update the Kconfig text to make it clear and to avoid wrong assumptions when debugging issues found by it. Fixes: 6d83f94db95c ("genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now") Link: https://lore.kernel.org/linux-i2c/859e8211-2c56-8dd5-d6fb-33e4358e4128@pengutronix.de/T/#mf24d7070d7e0c8f17b6be6ceb51df94b7d7613b3 Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200702222024.6915-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03firmware: improve description of firmware_request_nowarnWolfram Sang
The doubled 'however' is confusing. Simplify the comment a little and reformat the paragraph. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20200702221107.6562-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02devres: handle zero size in devm_kmalloc()Bartosz Golaszewski
Make devm_kmalloc() behave similarly to non-managed kmalloc(): return ZERO_SIZE_PTR when requested size is 0. Update devm_kfree() to handle this case. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200629065008.27620-5-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02device: remove 'extern' attribute from function prototypes in device.hBartosz Golaszewski
Functions are declared 'extern' implicitly by the compiler. There's no reason to prepend every prototype with it. Remove the 'extern' keyword from all function declarations in linux/device.h. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200629065008.27620-4-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02devres: move the size check from alloc_dr() into a separate functionBartosz Golaszewski
We will perform the same size check in devm_krealloc(). Move the relevant code into a separate helper. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200629065008.27620-3-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02devres: remove stray space from devm_kmalloc() definitionBartosz Golaszewski
Use the preferred coding style for functions returning pointers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200629065008.27620-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}Dan Williams
A common pattern for using plain DEVICE_ATTR() instead of DEVICE_ATTR_RO() and DEVICE_ATTR_RW() is for attributes that want to limit read to only root. I.e. many users of DEVICE_ATTR() are specifying 0400 or 0600 for permissions. Given the expectation that CAP_SYS_ADMIN is needed to access these sensitive attributes and an explicit helper with the _ADMIN_ identifier for DEVICE_ATTR_ADMIN_{RO,RW}. Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/159312906372.1850128.11611897078988158727.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-28Linux 5.8-rc3Linus Torvalds
2020-06-28Merge tag 'arm-omap-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ...
2020-06-28Merge tag 'arm-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bug fixes, mostly for devicetree files NXP i.MX: - Use correct voltage on some i.MX8M board device trees to avoid hardware damage - Code fixes for a compiler warning and incorrect reference counting, both harmless. - Fix the i.MX8M SoC driver to correctly identify imx8mp - Fix watchdog configuration in imx6ul-kontron device tree. Broadcom: - A small regression fix for the Raspberry-Pi firmware driver - A Kconfig change to use the correct timer driver on Northstar - A DT fix for the Luxul XWC-2000 machine - Two more DT fixes for NSP SoCs STmicroelectronics STI - Revert one broken patch for L2 cache configuration ARM Versatile Express: - Fix a regression by reverting a broken DT cleanup TEE drivers: - MAINTAINERS: change tee mailing list" * tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: sti: Implement dummy L2 cache's write_sec" soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range ARM: dts: NSP: Correct FA2 mailbox node ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() MAINTAINERS: change tee mailing list ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 arm: dts: vexpress: Move mcc node back into motherboard node
2020-06-28Merge tag 'timers-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A single DocBook fix" * tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix kerneldoc system_device_crosststamp & al
2020-06-28Merge tag 'perf-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A single Kbuild dependency fix" * tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Fix RAPL config variable bug
2020-06-28Merge tag 'efi-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: - Fix build regression on v4.8 and older - Robustness fix for TPM log parsing code - kobject refcount fix for the ESRT parsing code - Two efivarfs fixes to make it behave more like an ordinary file system - Style fixup for zero length arrays - Fix a regression in path separator handling in the initrd loader - Fix a missing prototype warning - Add some kerneldoc headers for newly introduced stub routines - Allow support for SSDT overrides via EFI variables to be disabled - Report CPU mode and MMU state upon entry for 32-bit ARM - Use the correct stack pointer alignment when entering from mixed mode * tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub: arm: Print CPU boot mode and MMU state at boot efi/libstub: arm: Omit arch specific config table matching array on arm64 efi/x86: Setup stack correctly for efi_pe_entry efi: Make it possible to disable efivar_ssdt entirely efi/libstub: Descriptions for stub helper functions efi/libstub: Fix path separator regression efi/libstub: Fix missing-prototype warning for skip_spaces() efi: Replace zero-length array and use struct_size() helper efivarfs: Don't return -EINTR when rate-limiting reads efivarfs: Update inode modification time for successful writes efi/esrt: Fix reference count leak in esre_create_sysfs_entry. efi/tpm: Verify event log header before parsing efi/x86: Fix build with gcc 4
2020-06-28Merge tag 'sched_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: "The most anticipated fix in this pull request is probably the horrible build fix for the RANDSTRUCT fail that didn't make -rc2. Also included is the cleanup that removes those BUILD_BUG_ON()s and replaces it with ugly unions. Also included is the try_to_wake_up() race fix that was first triggered by Paul's RCU-torture runs, but was independently hit by Dave Chinner's fstest runs as well" * tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cfs: change initial value of runnable_avg smp, irq_work: Continue smp_call_function*() and irq_work*() integration sched/core: s/WF_ON_RQ/WQ_ON_CPU/ sched/core: Fix ttwu() race sched/core: Fix PI boosting between RT and DEADLINE tasks sched/deadline: Initialize ->dl_boosted sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
2020-06-28Merge tag 'x86_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - AMD Memory bandwidth counter width fix, by Babu Moger. - Use the proper length type in the 32-bit truncate() syscall variant, by Jiri Slaby. - Reinit IA32_FEAT_CTL during wakeup to fix the case where after resume, VMXON would #GP due to VMX not being properly enabled, by Sean Christopherson. - Fix a static checker warning in the resctrl code, by Dan Carpenter. - Add a CR4 pinning mask for bits which cannot change after boot, by Kees Cook. - Align the start of the loop of __clear_user() to 16 bytes, to improve performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming. * tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/64: Align start of __clear_user() loop to 16-bytes x86/cpu: Use pinning mask for CR4 bits needing to be 0 x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup syscalls: Fix offset type of ksys_ftruncate() x86/resctrl: Fix memory bandwidth counter width for AMD
2020-06-28Merge tag 'rcu_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU-vs-KCSAN fixes from Borislav Petkov: "A single commit that uses "arch_" atomic operations to avoid the instrumentation that comes with the non-"arch_" versions. In preparation for that commit, it also has another commit that makes these "arch_" atomic operations available to generic code. Without these commits, KCSAN uses can see pointless errors" * tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Fixup noinstr warnings locking/atomics: Provide the arch_atomic_ interface to generic code
2020-06-28Merge tag 'objtool_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: "Three fixes from Peter Zijlstra suppressing KCOV instrumentation in noinstr sections. Peter Zijlstra says: "Address KCOV vs noinstr. There is no function attribute to selectively suppress KCOV instrumentation, instead teach objtool to NOP out the calls in noinstr functions" This cures a bunch of KCOV crashes (as used by syzcaller)" * tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix noinstr vs KCOV objtool: Provide elf_write_{insn,reloc}() objtool: Clean up elf_write() condition
2020-06-28Merge tag 'x86_entry_for_5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 entry fixes from Borislav Petkov: "This is the x86/entry urgent pile which has accumulated since the merge window. It is not the smallest but considering the almost complete entry core rewrite, the amount of fixes to follow is somewhat higher than usual, which is to be expected. Peter Zijlstra says: 'These patches address a number of instrumentation issues that were found after the x86/entry overhaul. When combined with rcu/urgent and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy again. Part of making this all work is bumping the minimum GCC version for KASAN builds to gcc-8.3, the reason for this is that the __no_sanitize_address function attribute is broken in GCC releases before that. No known GCC version has a working __no_sanitize_undefined, however because the only noinstr violation that results from this happens when an UB is found, we treat it like WARN. That is, we allow it to violate the noinstr rules in order to get the warning out'" * tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Fix #UD vs WARN more x86/entry: Increase entry_stack size to a full page x86/entry: Fixup bad_iret vs noinstr objtool: Don't consider vmlinux a C-file kasan: Fix required compiler version compiler_attributes.h: Support no_sanitize_undefined check with GCC 4 x86/entry, bug: Comment the instrumentation_begin() usage for WARN() x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*() x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline() compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr kasan: Bump required compiler version x86, kcsan: Add __no_kcsan to noinstr kcsan: Remove __no_kcsan_or_inline x86, kcsan: Remove __no_kcsan_or_inline usage
2020-06-28sched/cfs: change initial value of runnable_avgVincent Guittot
Some performance regression on reaim benchmark have been raised with commit 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") The problem comes from the init value of runnable_avg which is initialized with max value. This can be a problem if the newly forked task is finally a short task because the group of CPUs is wrongly set to overloaded and tasks are pulled less agressively. Set initial value of runnable_avg equals to util_avg to reflect that there is no waiting time so far. Fixes: 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org
2020-06-28smp, irq_work: Continue smp_call_function*() and irq_work*() integrationPeter Zijlstra
Instead of relying on BUG_ON() to ensure the various data structures line up, use a bunch of horrible unions to make it all automatic. Much of the union magic is to ensure irq_work and smp_call_function do not (yet) see the members of their respective data structures change name. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20200622100825.844455025@infradead.org
2020-06-28sched/core: s/WF_ON_RQ/WQ_ON_CPU/Peter Zijlstra
Use a better name for this poorly named flag, to avoid confusion... Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lkml.kernel.org/r/20200622100825.785115830@infradead.org
2020-06-28sched/core: Fix ttwu() racePeter Zijlstra
Paul reported rcutorture occasionally hitting a NULL deref: sched_ttwu_pending() ttwu_do_wakeup() check_preempt_curr() := check_preempt_wakeup() find_matching_se() is_same_group() if (se->cfs_rq == pse->cfs_rq) <-- *BOOM* Debugging showed that this only appears to happen when we take the new code-path from commit: 2ebb17717550 ("sched/core: Offload wakee task activation if it the wakee is descheduling") and only when @cpu == smp_processor_id(). Something which should not be possible, because p->on_cpu can only be true for remote tasks. Similarly, without the new code-path from commit: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") this would've unconditionally hit: smp_cond_load_acquire(&p->on_cpu, !VAL); and if: 'cpu == smp_processor_id() && p->on_cpu' is possible, this would result in an instant live-lock (with IRQs disabled), something that hasn't been reported. The NULL deref can be explained however if the task_cpu(p) load at the beginning of try_to_wake_up() returns an old value, and this old value happens to be smp_processor_id(). Further assume that the p->on_cpu load accurately returns 1, it really is still running, just not here. Then, when we enqueue the task locally, we can crash in exactly the observed manner because p->se.cfs_rq != rq->cfs_rq, because p's cfs_rq is from the wrong CPU, therefore we'll iterate into the non-existant parents and NULL deref. The closest semi-plausible scenario I've managed to contrive is somewhat elaborate (then again, actual reproduction takes many CPU hours of rcutorture, so it can't be anything obvious): X->cpu = 1 rq(1)->curr = X CPU0 CPU1 CPU2 // switch away from X LOCK rq(1)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 9 switch_to(Z) X->on_cpu = 0 UNLOCK rq(1)->lock // migrate X to cpu 0 LOCK rq(1)->lock dequeue_task(X) set_task_cpu(X, 0) X->cpu = 0 UNLOCK rq(1)->lock LOCK rq(0)->lock enqueue_task(X) X->on_rq = 1 UNLOCK rq(0)->lock // switch to X LOCK rq(0)->lock smp_mb__after_spinlock switch_to(X) X->on_cpu = 1 UNLOCK rq(0)->lock // X goes sleep X->state = TASK_UNINTERRUPTIBLE smp_mb(); // wake X ttwu() LOCK X->pi_lock smp_mb__after_spinlock if (p->state) cpu = X->cpu; // =? 1 smp_rmb() // X calls schedule() LOCK rq(0)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 0 if (p->on_rq) smp_rmb(); if (p->on_cpu && ttwu_queue_wakelist(..)) [*] smp_cond_load_acquire(&p->on_cpu, !VAL) cpu = select_task_rq(X, X->wake_cpu, ...) if (X->cpu != cpu) switch_to(Y) X->on_cpu = 0 UNLOCK rq(0)->lock However I'm having trouble convincing myself that's actually possible on x86_64 -- after all, every LOCK implies an smp_mb() there, so if ttwu observes ->state != RUNNING, it must also observe ->cpu != 1. (Most of the previous ttwu() races were found on very large PowerPC) Nevertheless, this fully explains the observed failure case. Fix it by ordering the task_cpu(p) load after the p->on_cpu load, which is easy since nothing actually uses @cpu before this. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200622125649.GC576871@hirez.programming.kicks-ass.net
2020-06-28sched/core: Fix PI boosting between RT and DEADLINE tasksJuri Lelli
syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Tested-by: Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain
2020-06-28sched/deadline: Initialize ->dl_boostedJuri Lelli
syzbot reported the following warning triggered via SYSC_sched_setattr(): WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441 This happens because the ->dl_boosted flag is currently not initialized by __dl_clear_params() (unlike the other flags) and setup_new_dl_entity() rightfully complains about it. Initialize dl_boosted to 0. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com
2020-06-28sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to ↵Scott Wood
fix mask corruption This function is concerned with the long-term CPU mask, not the transitory mask the task might have while migrate disabled. Before this patch, if a task was migrate-disabled at the time __set_cpus_allowed_ptr() was called, and the new mask happened to be equal to the CPU that the task was running on, then the mask update would be lost. Signed-off-by: Scott Wood <swood@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
2020-06-28sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build failPeter Zijlstra
As a temporary build fix, the proper cleanup needs more work. Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Eric Biggers <ebiggers@kernel.org> Suggested-by: Eric Biggers <ebiggers@kernel.org> Suggested-by: Kees Cook <keescook@chromium.org> Fixes: a148866489fb ("sched: Replace rq::wake_list") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-06-28Merge tag 'imx-fixes-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/drivers-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers fixes for 5.8, please pull the following: - Andy provides a fix for the Raspberry Pi firmware driver to print the correct time upon boot. This is a fallout from a converstion to use the ptT format * tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() Link: https://lore.kernel.org/r/20200619202250.19029-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/soc-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine/Kconfig fixes for 5.8, please pull the following: - Matthew adds a missing select to permit the use of the standard ARM SP804 timers on Norsthstar Plus (NSP) * tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP Link: https://lore.kernel.org/r/20200619202250.19029-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.8, please pull the following: - Rafal adds a missing 'device_type' property to the Luxul XWC-2000 required for the memory nodes to be correctly parsed by Linux - Matthew provides two fixes for the NSP SoCs, one to disable the PL330 DMA controller by default since it can be left in reset by the bootloader and the second to correct the flow accelerator mailbox node * tag 'arm-soc/for-5.8/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: NSP: Correct FA2 mailbox node ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 Link: https://lore.kernel.org/r/20200619202250.19029-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Revert "ARM: sti: Implement dummy L2 cache's write_sec"Patrice Chotard
This reverts commit 7b8e0188fa717cd9abc4fb52587445b421835c2a. Initially, STiH410-B2260 was supposed to be secured, that's why l2c_write_sec was stubbed to avoid secure register access from non secure world. But by default, STiH410-B2260 is running in non secure mode, so L2 cache register accesses are authorized, l2c_write_sec stub is not needed. With this patch, L2 cache is configured and performance are enhanced. Link: https://lore.kernel.org/r/20200618172456.29475-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Alain Volmat <alain.volmat@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-rc1-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Few dts fixes for omaps for v5.8 Few fixes for various devices: - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode * tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Link: https://lore.kernel.org/r/pull-1592499282-121092@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/dt-missed-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Missed sdhci patch for am3 and am4 I forgot to send a pull request earlier for converting am3 and am4 to use sdhci-omap driver instead of the old omap_hsmmc driver. There was a display subsystem related suspend and resume regression found recently and looks like I forgot to send a pull request for this patch while debugging the regression. This patch has been tested without the display subsystem, and has been in Linux next for several weeks now, so would be good to have merged for v5.8. * tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver Link: https://lore.kernel.org/r/pull-1591637467-607254@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'tee-ml-for-v5.8' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Change the TEE mailing list in MAINTAINERS * tag 'tee-ml-for-v5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee: MAINTAINERS: change tee mailing list Link: https://lore.kernel.org/r/20200616075948.GA2288211@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-04-09 06:43:08 +0000