summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-03wifi: mt76: mt7996: enable EHT support in firmwareShayne Chen
Add sta_rec_eht command and extend phymode setting. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add support for EHT rate reportShayne Chen
Currenly only EHT TX rate report is supported. EHT RX rate is temporally reported with HE rate. Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add EHT capability initShayne Chen
Add EHT mac and phy capability init for mt7996 chipsets. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rework capability initShayne Chen
Rework and extract common code of capability init for the preparation of adding EHT capability. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add helpers for wtbl and interface limitShayne Chen
Add helpers to get the maximum wtbl size and interface num based on hw caps. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add variants supportShayne Chen
There are variants of mt7996 which are different from eht supported and wtbl size limit. Get the hw caps with CHIP_CONFIG command. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add EHT rate stats for ethtoolShayne Chen
Add support to get EHT rate stats from ethtool. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: increase wcid size to 1088Shayne Chen
Increase wcid size to support up to 1024 station hw entries and 64 bcast/mcast hw entries. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: add cmd id related to EHT supportShayne Chen
This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: add helpers for EHT capabilityShayne Chen
Add helpers to get eht cap and phymode on different bands and vifs. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: add CMD_CBW_320MHZShayne Chen
Add CMD_CBW_320MHZ for setting bandwidth 320 MHz to firmware. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add EHT phy typeShayne Chen
Extend phy type and phymode bitfields for EHT support. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: remove __mt76_mcu_restart macroLorenzo Bianconi
__mt76_mcu_restart is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: avoid mcu_restart function pointerLorenzo Bianconi
Run mt7996_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_tx_complete_skbLorenzo Bianconi
Drop mt7996_tx_complete_skb routine since it is equivalent to mt76_connac_tx_complete_skb(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_txp_skb_unmapLorenzo Bianconi
Drop mt7996_txp_skb_unmap routine since it is equivalent to mt76_connac_txp_skb_unmap(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_txp_common structureLorenzo Bianconi
mt7996_txp structure is equal to mt76_connac_fw_txp one. Drop mt7996_txp and rely on mt76_connac_txp_common. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_valLorenzo Bianconi
In order to fix a possible NULL pointer dereference in mt7996_mac_write_txwi() of vif pointer, export mt76_connac2_mac_tx_rate_val utility routine and reuse it in mt7996 driver. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: fix error code of return in mt7921_acpi_readAaron Ma
Kernel NULL pointer dereference when ACPI SAR table isn't implemented well. Fix the error code of return to mark the ACPI SAR table as invalid. [ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0 [ 5.077381] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 5.077630] #PF: supervisor read access in kernel mode [ 5.077883] #PF: error_code(0x0000) - not-present page [ 5.078138] PGD 0 P4D 0 [ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220 [mt7921_common] ... [ 5.080786] Call Trace: [ 5.080786] <TASK> [ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common] [ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e] [ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e] [ 5.080786] local_pci_probe+0x47/0x90 [ 5.080786] pci_call_probe+0x55/0x190 [ 5.080786] pci_device_probe+0x84/0x120 Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: release rxwi in mt7915_wed_release_rx_bufSujuan Chen
Free rxwi cache releasing WED rx buffers in mt7915_wed_release_rx_buf routine Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: enable page_pool statsLorenzo Bianconi
Enable page_pool ethtool statistics for mt7915 and mt7921 chipsets. Tested-by: Felix Fietkau <nbd@nbd.name> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: switch to page_pool allocatorLorenzo Bianconi
In order to reduce possible memory allocation failures due to memory fragmentation caused by page_frag_cache allocator, switch to page_pool allocator for dma and usb mt76 drivers. Remove per rx-queue page_frag_cache Co-developed-by: Felix Fietkau <nbd@nbd.name> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: fix memory leak in mt7915_mmio_wed_init_rx_bufLorenzo Bianconi
Free mt76_txwi_cache pointer in mt7915_mmio_wed_init_rx_buf routine in case of failure. Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistentNeil Chen
The rx filter, in mt7921 series, may be changed in fw operation. There is a racing problem if rx filter controlled by both driver and firmware at the same time. To avoid this issue, let mt7921 driver set rx filter by new command MCU_CE_CMD_SET_RX_FILTER and allow the firmware controlling it only. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Neil Chen <yn.chen@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add memory barrier to SDIO queue kickDeren Wu
Ensure the entry has been fully updated before SDIO bus worker access it. This patch would fix potential memory risk in both mt7663s and mt7921s. Fixes: 764dee47e2c1 ("mt76: sdio: move common code in mt76_sdio module") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: reduce polling time in pmctrlDeren Wu
Due to the polling tick is 10ms, the wake up flow in the status waiting would cause more 10~20ms than the real HW response time. Reduce tick-interval from 10ms to 1ms to get better network performance, such as ping latency, in low power mode. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add flexible polling wait-interval supportDeren Wu
The default waiting unit is 10ms and the value is too much for data path related control. Provide a new API mt76_poll_msec_tick() to support different cases, such as 1ms polling waiting kick. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: fix WED TxS reportingRyder Lee
The previous commit forgot to remove a leftover check. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Reported-By: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: wed: enable red per-band token dropPeter Chiu
Enable RED to limit the number of token used by each band. If single band uses too many tokens, it would hurt the throughput of the other bands.The software path can solve this problem by AQL so enable RED for HW path only. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: set sku initial value to zeroPeter Chiu
Set sku initial value before mcu starts to prevent mcu from getting an invalid value. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921u: add support for Comfast CF-952AXChuanhong Guo
Comfast CF-952AX is a MT7921 based USB WiFi dongle with custom VID/PID. Add an entry for it. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_transLorenzo Bianconi
The switch default case for frame_contorl is invalid. Return -EINVAL error for it. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: avoid mcu_restart function pointerLorenzo Bianconi
Avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7615: avoid mcu_restart function pointerLorenzo Bianconi
Run mt7615_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7603: avoid mcu_restart function pointerLorenzo Bianconi
Run mt7603_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: avoid mcu_restart function pointerLorenzo Bianconi
Run mt76_connac_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanupLorenzo Bianconi
Fix device unregister memory leak and alway cleanup all configured rx queues in mt76_dma_tx_cleanup routine. Fixes: 52546e27787e ("wifi: mt76: add WED RX support to dma queue alloc") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanupLorenzo Bianconi
Free rx_head skb in mt76_dma_rx_cleanup routine in order to avoid possible memory leak at module unload. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exitLorenzo Bianconi
Always purge mcu skb queues in mt7996_mcu_exit routine even if mt7996_firmware_state fails. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exitLorenzo Bianconi
Always purge mcu skb queues in mt7915_mcu_exit routine even if mt7915_firmware_state fails. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: introduce mt76_queue_is_wed_rx utility routineLorenzo Bianconi
This patch does not change any logic, just improve code readability. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: fix invalid remain_on_channel durationDeren Wu
round_jiffies_up() may change the duration reported from chip. We should take the real timeout for current channel privilege. Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: remove BW160 and BW80+80 supportMeiChia Chiu
Remove BW160 and BW80+80 capability in mt7915. Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Money Wang<Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: fix POWER_CTRL command name typoShayne Chen
Fix typo MCU_UNI_CMD_POWER_CREL to MCU_UNI_CMD_POWER_CTRL. Fixes: 779d34de055e ("wifi: mt76: connac: add more unified command IDs") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: do not hardcode vht beamform capShayne Chen
Use the sts variable when setting vht beamform sts cap. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: update register for CFEND_RATEShayne Chen
In newer chipsets, CFEND_RATE setting has been moved to different hw module. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: fix chainmask calculation in mt7996_set_antenna()Shayne Chen
Fix per-band chainmask when restoring from the dev chainmask. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: add ack signal supportDeren Wu
This reports signal strength of ACK packets from the peer as measured at each interface. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: fix channel switch fail in monitor modeDeren Wu
When the chanctx enabled, IEEE80211_CONF_CHANGE_CHANNEL in .config() would not be called anymore. mt76 cannot control RF channel for monitor. Add monitor type set-channel flow in .change_chanctx(). Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom()Shayne Chen
When flash mode is enabled, and the eeprom data in the flash is not for the current chipset, it'll still be checked valid, and the default eeprom bin won't be loaded. (e.g., mt7915 NIC inserted with mt7916 eeprom data in the flash.) Fix this kind of case by adding chip id into consideration in mt7915_check_eeprom(). Reported-by: Cheng-Ji Li <cheng-ji.li@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-04-21 19:56:55 +0000