| Age | Commit message (Collapse) | Author |
|---|
|
Restrict the DPCC configuration that can be set by userspace to valid
register bits. To do so, reorganize the related register macros to
define valid bitmasks, as well as bits of the DPCC mode register.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The rkisp1_dpcc_config() function looks over methods sets to configure
them, but sets the RKISP1_CIF_ISP_DPCC_METHODS_SET_* registers outside
of the loop with hand-unrolled code. Move this to the loop to simplify
the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
By rounding down, the actual timeout can be lower than requested. As a
result, long spaces just below the requested timeout can be incorrectly
reported as timeout and truncated.
Fixes: 877f1a7cee3f ("media: rc: mceusb: allow the timeout to be configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Return the value send_packet() directly instead of storing it in another
redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Automatic kernel fuzzing led to a WARN about invalid pipe direction in
the mceusb driver:
------------[ cut here ]------------
usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8
44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b
e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41
RSP: 0018:ffffc900032becf0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000
RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90
RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000
R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000
R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500
FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline]
mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807
The reason for the warning is clear enough; the driver sends an
unusual read request on endpoint 0 but does not set the USB_DIR_IN bit
in the bRequestType field.
More importantly, the whole situation can be avoided and the driver
simplified by converting it over to the relatively new
usb_control_msg_recv() and usb_control_msg_send() routines. That's
what this fix does.
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The config EMBEDDED selects EXPERT, i.e., when EMBEDDED is enabled, EXPERT
is usually also enabled. Hence, it sufficient to have the option
MEDIA_SUPPORT_FILTER set to y if !EXPERT.
This way, MEDIA_SUPPORT_FILTER does not refer to CONFIG_EMBEDDED anymore
and allows us to remove CONFIG_EMBEDDED in the close future.
Remove the reference to CONFIG_EMBEDDED in MEDIA_SUPPORT_FILTER.
Link: https://lore.kernel.org/linux-media/20220908104337.11940-4-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The Hantro mainline driver has been used in production
since several years and was only kept as a staging driver
due the stateless CODEC controls.
Now that all the stateless CODEC controls have been moved
out of staging, graduate the driver as well.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3).
It provides the following functions:
color transform, format conversion, resize, crop, rotate, flip
and additional image quality enhancement.
The MDP3 driver is mainly used for Google Chromebook products to
import the new architecture to set the HW settings as shown below:
User -> V4L2 framework
-> MDP3 driver -> SCP (setting calculations)
-> MDP3 driver -> CMDQ (GCE driver) -> HW
Each modules' related operation control is sited in mtk-mdp3-comp.c
Each modules' register table is defined in file with "mdp_reg_" prefix
GCE related API, operation control sited in mtk-mdp3-cmdq.c
V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c
Probe, power, suspend/resume, system level functions are defined in
mtk-mdp3-core.c
[hverkuil: add 'depends on REMOTEPROC']
Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com>
Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This patch adds DT binding documentation for MediaTek's CCORR and
WDMA components.
These components exist in both MediaTek's Media Data Path 3(MDP3) and DRM,
and the bindings are placed under the folder "./soc/mediatek" to prevent
duplicate builds.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This patch adds DT binding documents for Media Data Path 3 (MDP3)
a unit in multimedia system combined with several components and
used for scaling and color format convert.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: df3305156f98 ("[media] v4l: xilinx: Add Xilinx Video IP core")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Extend the xilinx video driver with Y12_1X12 greyscale format
Signed-off-by: Volodymyr Kharuk <vkh@melexis.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Extend the csi2rxss with Y12_1X12 greyscale format
Signed-off-by: Volodymyr Kharuk <vkh@melexis.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Some high resolution (like Sony IMX492 47Mpix) sensors requre large amount space
for buffering. 64MB is far from sufficient so this patch increases the limit to
512MB.
Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device does not implement the power line control correctly. Add a
corresponding control mapping override.
Bus 003 Device 003: ID 3277:0072 Sonix Technology Co., Ltd. USB 2.0 Camera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x3277
idProduct 0x0072
bcdDevice 1.00
iManufacturer 2 Sonix Technology Co., Ltd.
iProduct 1 USB 2.0 Camera
iSerial 3 REV0001
bNumConfigurations 1
Signed-off-by: huanglei <huanglei@kylinos.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Entity controls should get_cur using an entity-defined function
instead of via a query. Fix this in uvc_ctrl_set.
Fixes: 65900c581d01 ("media: uvcvideo: Allow entity-defined get_info and get_cur")
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As shown by the bug introduced in commit 86f7ef773156 ("media: uvcvideo:
Add support for per-device control mapping overrides"), the loop style
used by uvc_ctrl_init_ctrl() is error-prone. Rewrite the loops to use
indices instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Previously the unit buffer was allocated before checking the IRQ for
privacy GPIO. In case of error, the unit buffer was leaked.
Allocate the unit buffer after the IRQ to avoid it.
Addresses-Coverity-ID: 1474639 ("Resource leak")
Fixes: 2886477ff987 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The RZ/G2L VSPD provides a single VSPD instance. It has the following
sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF.
The VSPD block on RZ/G2L SoCs does not have a version register, so
added a new compatible string "renesas,r9a07g044-vsp2" with a data
pointer containing the info structure. Also the reset line is shared
with the DU module.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As per HW manual V3M and RZ/G2L SoCs has nonzero LIF buffer
attributes. So, introduce a feature bit for handling the same.
This patch also adds separate device info structure for V3M and V3H
SoCs, as both these SoCs share the same model ID, but V3H does not
have VSP1_HAS_NON_ZERO_LBA feature bit.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The VSPD block on RZ/G2L SoCs does not have a version register.
This patch adds support for adding VSP software version based on
device match.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As the resets DT property is mandatory, and is present in all .dtsi
in mainline, add support to perform deassert/assert using reference
counted reset handle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document VSPD found in RZ/G2L SoC. VSPD block is similar to VSP2-D
found on R-Car SoC's, but it does not have a version register and
it has 3 clocks compared to 1 clock on vsp1 and vsp2.
This patch introduces a new compatible 'renesas,r9a07g044-vsp2' to
handle these differences.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
vdec_hevc_start()
Add the missing clk_disable_unprepare() before return
from vdec_hevc_start() in the error handling case.
Fixes: 823a7300340e (“media: meson: vdec: add common HEVC decoder support”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
driver will enable the vpu core when request the first instance
on the core.
one vpu core can only support 8 streaming instances in the same
time, the instance won't be added to core's list before streamon.
so the actual instance count may be greater then the number in
the core's list.
in pm resume callback, driver will resume the core immediately if
core's list is not empty.
but this check is not accurate,
if suspend during one instance is requested, but not streamon,
then after suspend, the core won't be resume, and led to instance failure.
use the request_count instead of the core's list to check
whether is the core needed to resume immediately after suspend.
And it can make the pm suspend and resume callback more clear.
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
video_unregister_device will release device internally. There is no need to
call video_device_release after video_unregister_device.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
decoder will report the colorspace information
which is parsed from the sequence header,
if they are unspecified, just let application to determine it,
don't change it in driver.
Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
adjust the value range of gop size from [0, 65535] to [1, 8000].
when the gop size is set to a too large value,
it may affect the encoded picture quality.
so constrain it to a reasonable range.
Fixes: 0401e659c1f92 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For format vc1, the amphion vpu requires driver to
help insert some custom startcode before sequence and frame.
the startcode is different for vc1l and vc1g format.
But the sequence startcode is only needed at the beginning,
and it's not expected after seek.
driver need to treat the codec header and the first frame after seek
as a normal frame, and insert picture startcode for it.
In previous patch, I just fix it for vc1l format,
and should fix the similar issue for vc1g too.
Fixes: e670f5d672ef (media: amphion: only insert the first sequence startcode for vc1l format)
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The busy status bit may never de-assert if number of programmed skip
bits is incorrect, resulting in a kernel hang because the bit is polled
endlessly in the code. Fix it by adding timeout for the bit-polling.
This problem is reproducible by setting the data_bit_offset field of
the HEVC slice params to a wrong value by userspace.
Cc: stable@vger.kernel.org
Fixes: 7678c5462680 (media: cedrus: Fix decoding for some HEVC videos)
Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The cedrus_hw_resume() crashes with NULL deference on driver probe if
runtime PM is disabled because it uses platform data that hasn't been
set up yet. Fix this by setting the platform data earlier during probe.
Cc: stable@vger.kernel.org
Fixes: 50e761516f2b (media: platform: Add Cedrus VPU decoder driver)
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The watchdog needs to be scheduled before we trigger the decode
operation, otherwise there is a risk that the decoder IRQ will be
called before we have schedule the watchdog. As a side effect, the
watchdog would never be cancelled and its function would be called
at an inappropriate time.
This was observed while running Fluster with GStreamer as a backend.
Some programming error would cause the decoder IRQ to be call very
quickly after the trigger. Later calls into the driver would deadlock
due to the unbalanced state.
Cc: stable@vger.kernel.org
Fixes: 7c38a551bda1 ("media: cedrus: Add watchdog for job completion")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that we've transitioned all users to vb2_find_buffer API,
remove the unused vb2_find_timestamp().
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4L2_MPEG_VIDEO_BITRATE_MODE_CBR is the only bitrate mode supported
by the mediatek driver. The other bitrates must be skipped in
QUERY_MENU.
Fixes: d8e8aa866ed8 ("media: mediatek: vcodec: Report supported bitrate modes")
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Getting mt8188's chip name according to encoder compatible name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
1: add mt8188's compatible name: mediatek,mt8188-vcodec-dec.
2: mt8188 is lat single core architecture, using mtk_lat_sig_core_pdata to
initialize private data.
3: Getting mt8188's chip name according to decoder compatible name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add decoder document in dt-bindings yaml file for mt8188 platform.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is only one device mutex to lock vb2_queue when running
multi-instance encoding, it can be set by each encoder context.
[hverkuil: fix q_mutex documentation in the header]
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Usually, the real bitstream width and height will set to driver
by vidioc_s_fmt, and vidioc_try_fmt() does align to get the
buffer width and height, driver calculate the encoded bitstream
crop information through them. The aligned resolution will be set
as real resolution now if user didn't set crop info by
V4L2_SEL_TGT_CROP, and the encoded bitstream may exist green line
because of crop information error.
Fixs: 'b6c57d313f5f8 ("media: mtk-vcodec: venc: remove redundant code")'
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The "platform_get_resource(pdev, IORESOURCE_IRQ, 0)" is no longer
used after commit a1a2b7125e107("of/platform: Drop static setup of
IRQ resource from DT core"), so just remove the function in
encoder driver to avoid driver probe failed.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add mt8188's compatible "mediatek,mt8188-vcodec-enc".
Add mt8188's device private data "mt8188_pdata".
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add encoder dt-bindings for mt8188.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Encoder driver got iova from IOMMU is 34-bit, for example:
Here is the sample code:
encoder input frame buffer dma address is:
frm_buf =
vb2_dma_contig_plane_dma_addr(&vb2_v4l2_buffer->vb2_buf, 0);
the value of frm_buf is 0x1_ff30_0000.
encoder driver got the frm_buf and send the iova to SCP firmware
through SCP IPI message, then write to encoder hardware in SCP.
The iova is stored in IPI message as uint32_t data type, so the
value will be truncated from *0x1_ff30_0000* to *0xff30_0000*,
and then *0xff30_0000* will be written to encoder hardware, but
IOMMU will help to add the high *0x1_* bit back, so IOMMU can
translate the iova to PA correctly, encoder hardware can access
the correct memory for encoding.
Another reason to do this is the encoder hardware can't access
the 34-bit iova, IOMMU will help to add the remaining high bits
of iova. But for mt8188, encoder hardware can access 34-bit iova
directly, and encoder driver need write all 34 bits because
IOMMU can't help driver do this if the hardware support access
34-bit iova.
For the reasons above, this patch is added to support transfer
34-bit iova between kernel and SCP encoder driver. Use uint64_t
data type to store the iova, for compatibility with old chipsets,
add some new struct definitions for 34-bit.
[hverkuil: initialize wb and wb_34 to NULL]
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
CAL HW interrupts are inherently racy. If we get both start and end
interrupts, we don't know what has happened: did the DMA for a single
frame start and end, or did one frame end and a new frame start?
Usually for normal pixel frames we get the interrupts separately. If
we do get both, we have to guess. The assumption in the code is that the
active vertical area is larger than the blanking vertical area, and thus
it is more likely that we get the end of the old frame and the start of
a new frame.
However, for embedded data, which is only a few lines high, we always
get both interrupts. Here the assumption is that we get both for the
same frame.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Instead of handling the WDMA START and END interrupts separately, we
need to handle both at the same time to better manage the inherent race
conditions related to CAL interrupts.
Change the code so that we have a single function,
cal_irq_handle_wdma(), which gets two booleans, start and end, as
parameters, which allows us to manage the race conditions in the
following patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The userspace needs a way to match received metadata buffers to pixel
data buffers. The obvious way to do this is to use the CSI-2 frame
number, as both the metadata and the pixel data have the same frame
number as they come from the same frame.
However, we don't have means to convey the frame number to userspace. We
do have the 'sequence' field, which with a few tricks can be used for
this purpose.
To achieve this, track the frame number for each virtual channel and
increase the sequence for each virtual channel by frame-number -
previous-frame-number, also taking into account the eventual wrap of the
CSI-2 frame number. If the CSI-2 peripheral does not support frame
numbers, CAL increases the frame number register by one each frame.
This way we get a monotonically increasing sequence number which is
common to all streams using the same virtual channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Rename 'sd_state' parameters to 'state'. There are no other states, so
there is no ambiguity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
'ret' is initialized needlessly in cal_legacy_try_fmt_vid_cap(). We can
also move the variable to the for block, which is the only place where
it is used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
