| Age | Commit message (Collapse) | Author |
|---|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs changes for 6.7,
please pull the following:
- Rafal makes a number of updates to the BCM5301X (Northstar) SoCs DTS
to set MAC addresses for D-LInk DIR-885L, Asus, RT-AC87U, he
relicenses parts of the DTSI to GPL 2.0+ / MIT, and finally fixes a
number of Ethernet switch ports properties to enable/disable ports
adequately.
* tag 'arm-soc/for-6.7/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L
Link: https://lore.kernel.org/r/20231024155927.977263-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.7, part two
Two minor improvements for Midas boards (Exynos4412, e.g. Samsung Galaxy S3):
1. Correct the middle hardware key to emit KEY_OK instead of KEY_MENU,
because there is already separate touchkey providing KEY_MENU and
both label and node name suggests this should be KEY_OK.
2. Use defines for other key input constants.
* tag 'samsung-dt-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4412-midas: use Linux event codes for input keys
ARM: dts: samsung: exynos4412-midas: fix key-ok event code
Link: https://lore.kernel.org/r/20231024132615.65609-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch was developed as OpenWrt downstream change and was recently
confirmed to work as expected.
Tested-by: Rani Hod <rani.hod@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231024072605.32517-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Ports 5 and 7 are disabled by default because the standard use case is
for port 8 to manage all CPU directed traffic. For experimentation
purposes however it is desirable to provide adequate properties such
that people can experiment with using different ports without having to
figure out their configuration. Some of the use cases include but are
not limited to doubling or tripling the bandwidth by leveraging the
additional ports/Ethernet MAC combinations.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
When redescribing ports I assumed that missing "label" (like "cpu")
means switch port isn't used. That was incorrect and I realized my
change made Linux always use the first (5) CPU port (there are 3 of
them).
While above should technically be possible it often isn't correct:
1. Non-default switch ports are often connected to Ethernet interfaces
not fully covered by vendor setup (they may miss MACs)
2. On some devices non-default ports require specifying fixed link
This fixes network connectivity for some devices. It was reported &
tested for Netgear R8000. It also affects Linksys EA9200 with its
downstream DTS.
Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
That syncs more Northstar code to be based on the same licensing schema.
This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
Make USB 3.0 PHY use MDIO PHY driver").
Cc: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Vivek Unune <npcomplete13@gmail.com>
Link: https://lore.kernel.org/r/20230916085855.28375-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Move code added by Felix to the bcm-ns.dtsi which uses dual licensing.
That syncs more Northstar code to be based on the same licensing schema.
This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add
profiling support").
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230916083057.10458-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Specify NVRAM access and use its "et1macaddr" NVMEM cell.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230901124311.31156-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.7, part two
Add ramoops reserved memory region to E850-96 board for debugging
purposes.
* tag 'samsung-dt64-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add reserved memory for pstore on E850-96
Link: https://lore.kernel.org/r/20231023165412.529762-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As all level 2 and level 3 caches are unified, add required
cache-unified property to fix warnings like:
uniphier-ld11-ref.dtb: l2-cache: 'cache-unified' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20231023021221.2884828-3-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the th1520 devicetrees to use the new properties
"riscv,isa-base" & "riscv,isa-extensions".
For compatibility with other projects, "riscv,isa" remains.
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231022154135.3746-1-jszhang@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221107155825.1644604-21-pierre.gondois@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231020195022.4183862-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.7 (part 1)
Declare switch on eDPU (Armada 3720 based)
Use proper suffix -gpios for SFP GPIO properties on uDPU (Armada 3720 based)
Use appropriate label for spi1 pins on cn9310 boards
* tag 'mvebu-dt64-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: eDPU: add support for version with external switch
arm64: dts: marvell: uDPU: rename the SFP GPIO properties
ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pins
Link: https://lore.kernel.org/r/8734y6aaqb.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.7
New features across K3 SoCs:
- Watchdog and ESM nodes for J7xx
- DMA node for Camera interface (CSI) for J7xx
- C7x DSP and R5F rproc support for J7xx/AM68/AM69
AM68:
- USB and PCIe support
AM64:
- IO expander support
- GPIO LED, I2C device supplies for am64-tqma64xxl-mbax4xxl
- RTC IRQ pin update for am64 phycore
AM62A:
- TPS6593 PMIC and mcasp audio support
Misc:
- bootph-* tag addition for AM64 and AM62
- iw416 based bluetooth support on verdin-am62
- IO Expander addition for AM64 and AM65 boards
Fixes:
- Convert DMSS/NAVSS to simple-bus compatible to squelch dtbs_check
warnings
- Minor indentation fixes
- Specify base dtb for k3-j721s2-evm-gesi.dtbo and k3-am62x-sk-hdmi-audio.dtbo
- Misc fixups for AM62 Beagleplay, verdin-am62 boards
* tag 'ti-k3-dt-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (48 commits)
arm64: dts: ti: k3-j712s2-mcu: Add the mcu domain watchdog instances
arm64: dts: ti: k3-j721s2-main: Add the main domain watchdog instances
arm64: dts: ti: k3-j784s4-mcu: Add the mcu domain watchdog instances
arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances
arm64: dts: ti: k3-j7200: Add MCU domain ESM instance
arm64: dts: ti: k3-j784s4: Add ESM instances
arm64: dts: ti: k3-j721s2: Add ESM instances
arm64: dts: ti: k3-j784s4-main: Add BCDMA instance for CSI2RX
arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RX
arm64: dts: ti: k3-*: Convert NAVSS to simple-bus
arm64: dts: ti: k3-*: Convert DMSS to simple-bus
arm64: dts: ti: Fix HDMI Audio overlay in Makefile
arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A
arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC
arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz
arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators
arm64: dts: ti: k3-am62a-main: Add nodes for McASP
arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: update gpio-led configuration
arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add chassis-type
arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add muxing for GPIOs on pin headers
...
Link: https://lore.kernel.org/r/f05c98b6-6274-4544-8fcd-0332c39244c9@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt
MediaTek ARM64 DTS updates for v6.7
- Add support for SMI/IOMMU/LARBs, power domains and multimedia
related subsystems for the MT8365 SoC
- Add support for MediaTek Genio 1200 IoT evaluation board
- Add support for newer revisions of MT8192 Chromebooks
- Add support for internal eDP display on MT8195 Cherry Chromebooks
- Add display and display backlight support for the Helio X10 SoC and
for the Sony Xperia M5 smartphone
* tag 'v6.6-next-dts64.3' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits)
arm64: dts: mediatek: cherry: Configure eDP and internal display
arm64: dts: mediatek: mt6795-xperia-m5: Add DSI Display and its vregs
arm64: dts: mediatek: mt6795-xperia-m5: Add display backlight support
arm64: dts: mediatek: mt6795: Add support for display blocks and DPI/DSI
arm64: dts: mediatek: Add spherion-rev4
arm64: dts: mediatek: Add hayato-rev5-sku2
arm64: dts: mediatek: Remove asurada-audio dtsi files
dt-bindings: arm64: dts: mediatek: Add rev4 of spherion
dt-bindings: arm64: dts: mediatek: Add rev5-sku2 of hayato
arm64: dts: mediatek: add iommu support for mt8365 SoC
arm64: dts: mediatek: add larb support for mt8365 SoC
arm64: dts: mediatek: add smi support for mt8365 SoC
arm64: dts: mediatek: add power domain support for mt8365 SoC
arm64: dts: mediatek: add apu support for mt8365 SoC
arm64: dts: mediatek: add camsys support for mt8365 SoC
arm64: dts: mediatek: add mmsys support for mt8365 SoC
arm64: dts: mediatek: mt8183-kukui: Add PMIC regulator supplies
arm64: dts: mediatek: add device-tree for Genio 1200 EVK board
dt-bindings: arm64: mediatek: add mt8395-evk board
dt-bindings: power: Add MT8365 power domains
...
Link: https://lore.kernel.org/r/298f159c-f80d-3ba8-fde9-b11b59e5a58e@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Someone resurrected a rk3128 board and provided actual SMP support
for it. Of course firmware for that SoC does not come with TF-A so
it's the old-style SMP the older arm32 Rockchip SoCs use.
And additionally the rv1126 got pwm support.
* tag 'v6.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Switch to operating-points-v2 for RK3128's CPU
ARM: dts: rockchip: Enable SMP bring-up for RK3128
ARM: dts: rockchip: Add CPU resets for RK3128
ARM: dts: rockchip: Add SRAM node for RK3128
ARM: dts: rockchip: Enable pwm fan for edgeble-neu2
ARM: dts: rockchip: Add pwm11 node to rv1126
ARM: dts: rockchip: Add pwm11m0 pins to rv1126
ARM: dts: rockchip: Add pwm2 node to rv1126
ARM: dts: rockchip: Add pwm2m0 pins to rv1126
dt-bindings: pwm: rockchip: Document rv1126-pwm
Link: https://lore.kernel.org/r/2167992.Mh6RI2rZIc@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Work mostly focussed on the still new rk3588 Soc with some new boards the
Orange Pi 5 and Orange Pi 5 Plus as well as the QuartzPro64 from Pine64.
It also gained two new peripherals, the SFC (serial-flash-controller)
as well as support for it's AV1 video decoder.
And of course existing rk3588 boards got support added for various
peripherals (PCIe, usb, sardadc, leds, etc).
And in non-rk3588 news, rk3566-based gaming devices seem to be en-vogue,
and the Powkiddy RGB30 also moved in.
* tag 'v6.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
arm64: dts: rockchip: add support for Powkiddy RGB30
dt-bindings: arm64: rockchip: add Powkiddy RGB30
arm64: dts: rockchip: add status LED to rock-5b
arm64: dts: rockchip: add ADC buttons to rk3588-evb1
arm64: dts: rockchip: Add AV1 decoder node to rk3588s
arm64: dts: rockchip: Add missing sdmmc2 SDR rates to rock-3a
arm64: dts: rockchip: Enable UART6 on rock-5b
arm64: dts: rockchip: Remove duplicate regulator vcc3v3_wf from rock-5b
arm64: dts: rockchip: Add QuartzPro64 SBC device tree
dt-bindings: arm: rockchip: Add Pine64 QuarzPro64
arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus
dt-bindings: arm: rockchip: Add Orange Pi 5 Plus
arm64: dts: rockchip: Add UART9 M0 pin definitions to rk3588s
arm64: dts: rockchip: Add I2S2 M0 pin definitions to rk3588s
arm64: dts: rockchip: Add Orange Pi 5
arm64: dts: rockchip: Add sfc node to rk3588s
dt-bindings: arm: rockchip: Add Orange Pi 5 board
arm64: dts: rockchip: Add NanoPC T6 PCIe e-key support
arm64: dts: rockchip: Add sdio node to rock-5b
arm64: dts: rockchip: add PCIe3 bus to rk3588-evb1
...
Link: https://lore.kernel.org/r/1870252.CQOukoFCf9@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.7
StarFive:
Things are a bit slower for StarFive this window, there's only the
addition of audio related DT nodes to speak of here.
Generic:
The SiFive, StarFive and Microchip devicetrees have had my replacement
ISA extension detection properties added. Unfortunately, the old
"riscv,isa" property never defined exactly what the extensions it
contained meant, and people were want to fill it in incorrectly (and
call upstream kernel devs idiots for not doing the same). The new
properties have explicit definitions and hopefully will stand up better
to some of the variation from RVI.
Sophgo:
Two new SoCs, one is probably the first of several with up/down tuned
variants, that have a pair of T-Head c906 cores and appear aimed at the
IP camera, smart <insert whatever> etc markets. They are intended to run
in AMP mode, with an RTOS on the less powerful core. The other is far
more interesting to kernel developers however, the 64-core SG2042, with
more recent c920 cores from T-Head at 2 GHz. For both, support is at a
very basic stage - some of the same developers are working on them as
other T-Head powered SoCs, but hopefully things will move beyond a basic
console boot. The goal is for Chen Wang to take over maintaining the
Sophgo support once they have some more experience with the process.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (22 commits)
riscv: dts: starfive: convert isa detection to new properties
riscv: dts: sifive: convert isa detection to new properties
riscv: dts: microchip: convert isa detection to new properties
riscv: dts: sophgo: add Milk-V Duo board device tree
riscv: dts: sophgo: add initial CV1800B SoC device tree
dt-bindings: riscv: Add Milk-V Duo board compatibles
dt-bindings: timer: Add SOPHGO CV1800B clint
dt-bindings: interrupt-controller: Add SOPHGO CV1800B plic
riscv: defconfig: enable SOPHGO SoC
riscv: dts: sophgo: add Milk-V Pioneer board device tree
riscv: dts: add initial Sophgo SG2042 SoC device tree
dt-bindings: interrupt-controller: Add Sophgo sg2042 CLINT mswi
dt-bindings: timer: Add Sophgo sg2042 CLINT timer
dt-bindings: interrupt-controller: Add Sophgo SG2042 PLIC
dt-bindings: riscv: Add T-HEAD C920 compatibles
dt-bindings: riscv: add sophgo sg2042 bindings
dt-bindings: vendor-prefixes: add milkv/sophgo
riscv: Add SOPHGO SOC family Kconfig support
riscv: dts: starfive: add assigned-clock* to limit frquency
riscv: dts: starfive: Add JH7110 PWM-DAC support
...
Link: https://lore.kernel.org/r/20231016-filing-payroll-7aca51b8f1a3@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The "pl022,hierarchy" is not documented, all instances use are 0 and
isn't handled in the kernel driver, so let's just remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230928190859.1072420-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
Add the required nodes to enable the DisplayPort interface, connected
to the Embedded DisplayPort port, where we have an internal display.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230816190427.2137768-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add support for the DSI display found on the Sony Xperia M5, including
the necessary regulators configuration for it.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082822.680010-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the relevant nodes for display backlight on Sony Xperia M5: this
needs both the SoC PWM IP and MT6332 PMIC LED strings.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082822.680010-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Introduce all nodes for all of the display blocks in the MediaTek Helio
X10 MT6795 SoC, including the DSI PHY and DSI/DPI interfaces: those are
left disabled as usage is board specific.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082822.680010-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add a devicetree for rev4 of Spherion. It uses the rt5682s audio codec
instead of the rt5682 used in the previous revision.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-6-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add a devicetree for rev5-sku2 of Hayato. It uses the rt5682s audio
codec instead of the rt5682 used in the previous revision.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-5-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
There aren't enough users of the common asurada-audio dtsi files to
justify having them. It is simpler to just have the audio nodes directly
on the board files.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-4-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add binding for newer version of Google Spherion (Acer Chromebook 514):
rev4.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-3-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add binding for newer version of Google Hayato: rev5-sku2.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add iommu support in the SoC DTS using the 4 local arbiters (LARBs)
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-7-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Local arbiter (LARB) is a component of Smart Multimedia Interface (SMI),
used to help the memory management (IOMMU).
This patch add 4 LARBs and 2 clocks for the larb1 and larb3 support.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-6-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Smart Multimedia Interface (SMI) local arbiter does the arbitration for
memory requests from multi-media engines. Add SMI in the MT8365 DTS will
allow to add local ARBiter (LARB), use by IOMMU.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-5-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The following power domain are added to the SoC dts:
- MM (MultiMedia)
- CONN (Connectivity)
- MFG (MFlexGraphics)
- Audio
- Cam (Camera)
- DSP (Digital Signal Processor)
- Vdec (Video decoder)
- Venc (Video encoder)
- APU (AI Processor Unit)
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-4-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
AI Processor Unit System (APUSYS) is a highly efficient computing unit
system which is most suitable for AI/CV algorithms. It includes one
programmable AI processor (Cadence VP6) for both AI and CV algorithms,
and an eDMA engine for data movement between external DRAM and VP6
internal memory.
For more detail, ask Mediatek for the MT8365 IoT application processor
functional specification.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-3-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Camera System (CamSys) incorporates an enhanced feature based image
signal processor to connect a variety of image sensor components. This
processor consists of timing generated unit (TG), lens/sensor
compensation unit and image process unit.
For more detail, ask Mediatek for the MT8365 IoT application processor
functional specification.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-2-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Multimedia subsystem (MMsys) contains multimedia controller, Multimedia
Data Path v2.0 (MDP 2.0) and Display (DISP). The multimedia controller
includes bus fabric control, Smart Memory Interface (SMI) control,
memory access second-level arbiter, and multimedia configuration. It
plays the key role in handling different handshakings between infra
subsystem, video subsystem, image subsystem and G3D subsystem.
For more detail, ask Mediatek for the MT8365 IoT application processor
functional specification.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230207-iommu-support-v6-1-24453c8625b3@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The PMIC regulator node is missing regulator supplies. Now that the
binding supports them, add all the power rail supplies. Most of them
are fed from a system-wide semi-regulated power rail. A couple LDOs
are fed from the PMIC's own buck regulator outputs.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-13-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add basic device-tree for the Genio 1200-EVK board. This board
is made by MediaTek and has a MT8395 SoC (MT8195 family),
associated with the MT6359 and MT6360 PMICs, and
the MT7921 connectivity chip.
The IOs available on that board are:
* 1 USB Type-C connector with DP aux mode support
* 2 USB Type-A connector with a USB hub
* 1 micro-USB port for gadget or OTG support
* 1 full size HDMI RX and 1 full size HDMI TX connector
* 1 micro SD slot
* 40 pins header
* SPI interface header
* 1 M.2 slot
* 1 audio jack
* 1 micro-USB port for serial debug
* 2 connectors for DSI displays, 1 of the DSI panel is installed
* 3 connectors for CSI cameras
* 1 connector for a eDP panel
* 1 MMC storage
* 1 Touch Panel (installed DSI display)
* 1 M.2 slot for 5G dongle
This commit adds basic support in order to be able to boot.
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230914055145.16801-2-macpaul.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
1. Add compatible for MT8395.
2. Add bindings for the MediaTek mt8395-evk board, also known
as the "Genio 1200-EVK".
The MT8195 and MT8395 belong to the same SoC family,
with only minor differences in their physical characteristics.
They utilize unique efuse values for differentiation.
The booting process and configurations are managed by boot
loaders, firmware, and TF-A. Consequently, the part numbers
and procurement channels vary.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230914055145.16801-1-macpaul.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Use event codes with linux-event-codes.h included for input keys on
midas.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20231017101647.62770-1-raymondhackley@protonmail.com
[krzysztof: drop header include, because it is already provided by
dt-bindings/input/input.h]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Input event code 139 stands for KEY_MENU, instead of KEY_OK as node name
key-ok inplies. Fix it with correct event code 0x160.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20231017101636.62755-1-raymondhackley@protonmail.com
[krzysztof: use KEY_OK constant instead of raw value]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add power domains dt-bindings for MT8365.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-2-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Powkiddy RGB30 is a portable game device based on the Rockchip
RK3566 SoC. It has GPIO buttons on the face and sides for input, stereo
speakers, a 720x720 4 inch DSI display, a USB-C host port and a USB-C
peripheral port, dual SD card slots, WiFi, Bluetooth, and 1GB of RAM.
Working/Tested:
- SDMMC
- UART (for debugging)
- Buttons
- Charging/battery/PMIC
- Speaker/Headphones
- USB
- WiFi
- Bluetooth
- Display (at 59.04hz)
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231013183918.225666-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Powkiddy RGB30 is a portable handheld console from Powkiddy which
uses the Rockchip RK3566 SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013183918.225666-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Describe the Rock 5B status LED in its device tree.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231005134037.33231-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Rockchip EVB1 has a couple of buttons connected via an ADC
line. Let's add them to its devicetree.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231005134357.37171-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add node for AV1 video decoder.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231006065334.8117-1-benjamin.gaignard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add missing UHS-I SDR rates to sdmmc2. Add explicit alias as mmc2 while at it.
It would be good to have matching timings enabled in case slower SDIO devices
are encountered.
Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
Link: https://lore.kernel.org/r/20231011191448.58936-1-tszucs@protonmail.ch
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable UART lines on Radxa ROCK 5 Model B M.2 Key E.
Signed-off-by: Tamás Szűcs <szucst@iit.uni-miskolc.hu>
Link: https://lore.kernel.org/r/20231013215208.81345-1-szucst@iit.uni-miskolc.hu
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.7, round 1
Highlights:
----------
- MCU:
- Add SDIO sleep pins for F7 boards.
- MPU:
- STM32MP13:
- Add HASH and RNG support.
- STMP32MP15:
- OCTAVO:
- Fix regulators (LDO1/2/6 and 3v3_hdmi) by removing "always-on"
property on OSD32 common file.
- Add new OS32MP1-RED board. It embeds a STM32157C SoC,
512 MB of DDR3, CAN-FD, HDMI, USB-C OTG.
- STM32MP25:
- Add and enable SDCARD support.
- Add and enable ARM watchdog support and set it to 32 seconds.
* tag 'stm32-dt-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 boards
ARM: dts: stm32: add stm32f7 SDIO sleep pins
ARM: dts: stm32: add RNG node for STM32MP13x platforms
ARM: dts: stm32: omit unused pinctrl groups from stm32mp15 dtb files
ARM: dts: stm32: stm32f7-pinctrl: don't use multiple blank lines
ARM: dts: stm32: add HASH on stm32mp131
arm64: dts: st: enable secure arm-wdt watchdog on stm32mp257f-ev1
arm64: dts: st: add arm-wdt node for watchdog support on stm32mp251
arm64: dts: st: add SD-card support on STM32MP257F-EV1 board
arm64: dts: st: add sdmmc1 pins for stm32mp25
arm64: dts: st: add sdmmc1 node in stm32mp251 SoC file
ARM: dts: stm32: Add Octavo OSD32MP1-RED board
dt-bindings: arm: stm32: add extra SiP compatible for oct,stm32mp157c-osd32-red
ARM: dts: stm32: osd32: fix ldo6 not required to be always-on
ARM: dts: stm32: lxa-tac: remove v3v3_hdmi override
ARM: dts: stm32: osd32: fix ldo2 not required to be always-on
ARM: dts: stm32: osd32: fix ldo1 not required to be always-on
ARM: dts: stm32: Add alternate pinmux for can pins
ARM: dts: stm32: Add alternate pinmux for ldtc pins
ARM: dts: stm32: Add alternate pinmux for i2s pins
Link: https://lore.kernel.org/r/8a6b3ca9-f10d-825e-e371-8aeff3289a25@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
