summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-13Merge tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "Just small stuff. As a general announcement, on disk format is now frozen in my master branch - future on disk format changes will be optional, not required. - More fixes for going read-only: the previous fix was insufficient, but with more work on ordering journal reclaim flushing (and a btree node accounting fix so we don't split until we have to) the tiering_replication test now consistently goes read-only in less than a second. - fix for fsck when we have reflink pointers to missing indirect extents - some transaction restart handling fixes from Alan; the "Pass _orig_restart_count to trans_was_restarted" likely fixes some rare undefined behaviour heisenbugs" * tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs: bcachefs: Reuse transaction bcachefs: Pass _orig_restart_count to trans_was_restarted bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS bcachefs: Fix want_new_bset() so we write until the end of the btree node bcachefs: Split out journal pins by btree level bcachefs: Fix use after free bcachefs: Fix marking reflink pointers to missing indirect extents
2025-02-13net: pse-pd: Fix deadlock in current limit functionsKory Maincent
Fix a deadlock in pse_pi_get_current_limit and pse_pi_set_current_limit caused by consecutive mutex_lock calls. One in the function itself and another in pse_pi_get_voltage. Resolve the issue by using the unlocked version of pse_pi_get_voltage instead. Fixes: e0a5e2bba38a ("net: pse-pd: Use power limit at driver side instead of current limit") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250212151751.1515008-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13rxrpc: Fix ipv6 path MTU discoveryDavid Howells
rxrpc path MTU discovery currently only makes use of ICMPv4, but not ICMPv6, which means that pmtud for IPv6 doesn't work correctly. Fix it to check for ICMPv6 messages also. Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/3517283.1739359284@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13gpiolib: Fix crash on error in gpiochip_get_ngpios()Andy Shevchenko
The gpiochip_get_ngpios() uses chip_*() macros to print messages. However these macros rely on gpiodev to be initialised and set, which is not the case when called via bgpio_init(). In such a case the printing messages will crash on NULL pointer dereference. Replace chip_*() macros by the respective dev_*() ones to avoid such crash. Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-13Merge tag 'for-net-2025-02-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btintel_pcie: Fix a potential race condition - L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd - L2CAP: Fix corrupted list in hci_chan_del * tag 'for-net-2025-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix corrupted list in hci_chan_del Bluetooth: btintel_pcie: Fix a potential race condition Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd ==================== Link: https://patch.msgid.link/20250213162446.617632-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13Merge tag 'nf-25-02-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains one revert for: 1) Revert flowtable entry teardown cycle when skbuff exceeds mtu to deal with DF flag unset scenarios. This is reverts a patch coming in the previous merge window (available in 6.14-rc releases). * tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: Revert "netfilter: flowtable: teardown flow if cached mtu is stale" ==================== Link: https://patch.msgid.link/20250213100502.3983-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13io_uring/uring_cmd: unconditionally copy SQEs at prep timeJens Axboe
This isn't generally necessary, but conditions have been observed where SQE data is accessed from the original SQE after prep has been done and outside of the initial issue. Opcode prep handlers must ensure that any SQE related data is stable beyond the prep phase, but uring_cmd is a bit special in how it handles the SQE which makes it susceptible to reading stale data. If the application has reused the SQE before the original completes, then that can lead to data corruption. Down the line we can relax this again once uring_cmd has been sanitized a bit, and avoid unnecessarily copying the SQE. Fixes: 5eff57fa9f3a ("io_uring/uring_cmd: defer SQE copying until it's needed") Reported-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-13sched_ext: Use SCX_CALL_OP_TASK in task_tick_scxChuyi Zhou
Now when we use scx_bpf_task_cgroup() in ops.tick() to get the cgroup of the current task, the following error will occur: scx_foo[3795244] triggered exit kind 1024: runtime error (called on a task not being operated on) The reason is that we are using SCX_CALL_OP() instead of SCX_CALL_OP_TASK() when calling ops.tick(), which triggers the error during the subsequent scx_kf_allowed_on_arg_tasks() check. SCX_CALL_OP_TASK() was first introduced in commit 36454023f50b ("sched_ext: Track tasks that are subjects of the in-flight SCX operation") to ensure task's rq lock is held when accessing task's sched_group. Since ops.tick() is marked as SCX_KF_TERMINAL and task_tick_scx() is protected by the rq lock, we can use SCX_CALL_OP_TASK() to avoid the above issue. Similarly, the same changes should be made for ops.disable() and ops.exit_task(), as they are also protected by task_rq_lock() and it's safe to access the task's task_group. Fixes: 36454023f50b ("sched_ext: Track tasks that are subjects of the in-flight SCX operation") Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-02-13Reapply "net: skb: introduce and use a single page frag cache"Jakub Kicinski
This reverts commit 011b0335903832facca86cd8ed05d7d8d94c9c76. Sabrina reports that the revert may trigger warnings due to intervening changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it and revisit once that part is also ironed out. Fixes: 011b03359038 ("Revert "net: skb: introduce and use a single page frag cache"") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.Chuyi Zhou
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_ push_{front,back}. This patch fix this issue. Without this patch, if we use bpf_list kfunc in scx, the BPF verifier would complain: libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or module BTFs libbpf: failed to load object 'scx_foo' libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL With this patch, the bpf list kfunc will work as expected. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Fixes: 2a52ca7c98960 ("sched_ext: Add scx_simple and scx_example_qmap example schedulers") Signed-off-by: Tejun Heo <tj@kernel.org>
2025-02-13sched_ext: selftests: Fix grammar in tests descriptionDevaansh Kumar
Fixed grammar for a few tests of sched_ext. Signed-off-by: Devaansh Kumar <devaanshk840@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-02-13Merge tag 'loongarch-fixes-6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix bugs about idle, kernel_page_present(), IP checksum and KVM, plus some trival cleanups" * tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Set host with kernel mode when switch to VM mode LoongArch: KVM: Remove duplicated cache attribute setting LoongArch: KVM: Fix typo issue about GCFG feature detection LoongArch: csum: Fix OoB access in IP checksum code for negative lengths LoongArch: Remove the deprecated notifier hook mechanism LoongArch: Use str_yes_no() helper function for /proc/cpuinfo LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE LoongArch: Fix idle VS timer enqueue
2025-02-13Merge tag 'platform-drivers-x86-v6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - thinkpad_acpi: - Fix registration of tpacpi platform driver - Support fan speed in ticks per revolution (Thinkpad X120e) - Support V9 DYTC profiles (new Thinkpad AMD platforms) - int3472: Handle GPIO "enable" vs "reset" variation (ov7251) * tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver platform/x86: int3472: Call "reset" GPIO "enable" for INT347E platform/x86: int3472: Use correct type for "polarity", call it gpio_flags platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
2025-02-13s390/qeth: move netif_napi_add_tx() and napi_enable() from under BHAlexandra Winter
Like other drivers qeth is calling local_bh_enable() after napi_schedule() to kick-start softirqs [0]. Since netif_napi_add_tx() and napi_enable() now take the netdev_lock() mutex [1], move them out from under the BH protection. Same solution as in commit a60558644e20 ("wifi: mt76: move napi_enable() from under BH") Fixes: 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()") Link: https://lore.kernel.org/netdev/20240612181900.4d9d18d0@kernel.org/ [0] Link: https://lore.kernel.org/netdev/20250115035319.559603-1-kuba@kernel.org/ [1] Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250212163659.2287292-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()Wentao Liang
Add a check for the return value of mlxsw_sp_port_get_stats_raw() in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw() returns an error, exit the function to prevent further processing with potentially invalid data. Fixes: 614d509aa1e7 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c") Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13ipv6: mcast: add RCU protection to mld_newpack()Eric Dumazet
mld_newpack() can be called without RTNL or RCU being held. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection. Fixes: b8ad0cbc58f7 ("[NETNS][IPV6] mcast - handle several network namespace") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13team: better TEAM_OPTION_TYPE_STRING validationEric Dumazet
syzbot reported following splat [1] Make sure user-provided data contains one nul byte. [1] BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:633 [inline] BUG: KMSAN: uninit-value in string+0x3ec/0x5f0 lib/vsprintf.c:714 string_nocheck lib/vsprintf.c:633 [inline] string+0x3ec/0x5f0 lib/vsprintf.c:714 vsnprintf+0xa5d/0x1960 lib/vsprintf.c:2843 __request_module+0x252/0x9f0 kernel/module/kmod.c:149 team_mode_get drivers/net/team/team_core.c:480 [inline] team_change_mode drivers/net/team/team_core.c:607 [inline] team_mode_option_set+0x437/0x970 drivers/net/team/team_core.c:1401 team_option_set drivers/net/team/team_core.c:375 [inline] team_nl_options_set_doit+0x1339/0x1f90 drivers/net/team/team_core.c:2662 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2543 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:733 ____sys_sendmsg+0x877/0xb60 net/socket.c:2573 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2627 __sys_sendmsg net/socket.c:2659 [inline] __do_sys_sendmsg net/socket.c:2664 [inline] __se_sys_sendmsg net/socket.c:2662 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2662 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Reported-by: syzbot+1fcd957a82e3a1baa94d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=1fcd957a82e3a1baa94d Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250212134928.1541609-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13Bluetooth: L2CAP: Fix corrupted list in hci_chan_delLuiz Augusto von Dentz
This fixes the following trace by reworking the locking of l2cap_conn so instead of only locking when changing the chan_l list this promotes chan_lock to a general lock of l2cap_conn so whenever it is being held it would prevents the likes of l2cap_conn_del to run: list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:61! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:168 [inline] hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416 __sock_release net/socket.c:642 [inline] sock_close+0xbc/0x240 net/socket.c:1393 __fput+0x3e9/0x9f0 fs/file_table.c:448 task_work_run+0x24f/0x310 kernel/task_work.c:227 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7aceeaf449 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449 RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004 RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
2025-02-13Bluetooth: btintel_pcie: Fix a potential race conditionKiran K
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs to wait for this before sending other command. This patch fixes the potential miss of alive interrupt due to which HCI_OP_RESET can timeout. Expected flow: If tx command is HCI_OP_RESET, 1. set data->gp0_received = false 2. send HCI_OP_RESET 3. wait for alive interrupt Actual flow having potential race: If tx command is HCI_OP_RESET, 1. send HCI_OP_RESET 1a. Firmware raises alive interrupt here and in ISR data->gp0_received is set to true 2. set data->gp0_received = false 3. wait for alive interrupt Signed-off-by: Kiran K <kiran.k@intel.com> Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Reported-by: Bjorn Helgaas <helgaas@kernel.org> Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-13Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmdLuiz Augusto von Dentz
After the hci sync command releases l2cap_conn, the hci receive data work queue references the released l2cap_conn when sending to the upper layer. Add hci dev lock to the hci receive data work queue to synchronize the two. [1] BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 Read of size 8 at addr ffff8880271a4000 by task kworker/u9:2/5837 CPU: 0 UID: 0 PID: 5837 Comm: kworker/u9:2 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci1 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 l2cap_build_cmd net/bluetooth/l2cap_core.c:2964 [inline] l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 l2cap_sig_send_rej net/bluetooth/l2cap_core.c:5502 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5538 [inline] l2cap_recv_frame+0x221f/0x10db0 net/bluetooth/l2cap_core.c:6817 hci_acldata_packet net/bluetooth/hci_core.c:3797 [inline] hci_rx_work+0x508/0xdb0 net/bluetooth/hci_core.c:4040 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5837: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] l2cap_conn_add+0xa9/0x8e0 net/bluetooth/l2cap_core.c:6860 l2cap_connect_cfm+0x115/0x1090 net/bluetooth/l2cap_core.c:7239 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_remote_features_evt+0x68e/0xac0 net/bluetooth/hci_event.c:3726 hci_event_func net/bluetooth/hci_event.c:7473 [inline] hci_event_packet+0xac2/0x1540 net/bluetooth/hci_event.c:7525 hci_rx_work+0x3f3/0xdb0 net/bluetooth/hci_core.c:4035 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 l2cap_connect_cfm+0xcc/0x1090 net/bluetooth/l2cap_core.c:7235 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_conn_failed+0x287/0x400 net/bluetooth/hci_conn.c:1266 hci_abort_conn_sync+0x56c/0x11f0 net/bluetooth/hci_sync.c:5603 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Reported-by: syzbot+31c2f641b850a348a734@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=31c2f641b850a348a734 Tested-by: syzbot+31c2f641b850a348a734@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-13MAINTAINERS: Use my kernel.org address for I2C ACPI workMika Westerberg
Switch to use my kernel.org address for I2C ACPI work. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-02-13block: cleanup and fix batch completion adding conditionsJens Axboe
The conditions for whether or not a request is allowed adding to a completion batch are a bit hard to read, and they also have a few issues. One is that ioerror may indeed be a random value on passthrough, and it's being checked unconditionally of whether or not the given request is a passthrough request or not. Rewrite the conditions to be separate for easier reading, and only check ioerror for non-passthrough requests. This fixes an issue with bio unmapping on passthrough, where it fails getting added to a batch. This both leads to suboptimal performance, and may trigger a potential schedule-under-atomic condition for polled passthrough IO. Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()") Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-13PCI: Avoid FLR for Mediatek MT7922 WiFiBjorn Helgaas
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently does not work, and all subsequent config reads return ~0: pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint pciback 0000:01:00.0: not ready 65535ms after FLR; giving up After an FLR, pci_dev_wait() waits for the device to become ready. Prior to d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS"), it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR (~0). If it times out, pci_dev_wait() returns -ENOTTY and __pci_reset_function_locked() tries the next available reset method. Typically this is Secondary Bus Reset, which does work, so the MT7922 is eventually usable. After d591f6804e7e, if Configuration Request Retry Status Software Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it is something other than the special 0x0001 Vendor ID that indicates a completion with RRS status. When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001, i.e., the config read was completed with RRS, or a valid Vendor ID. On the MT7922, it seems that all config reads after FLR return ~0 indefinitely. When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's a valid Vendor ID and the device is now ready, so it returns with success. After pci_dev_wait() returns success, we restore config space and continue. Since the MT7922 is not actually ready after the FLR, the restore fails and the device is unusable. We considered changing pci_dev_wait() to continue polling if a PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did before d591f6804e7e, although we have to wait for the timeout and then fall back to SBR. But it doesn't work for SR-IOV VFs, which *always* return 0xffff as the Vendor ID. Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This will cause fallback to another reset method, such as SBR. Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org Fixes: d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS") Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149 Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Cc: stable@vger.kernel.org
2025-02-13Xen/swiotlb: mark xen_swiotlb_fixup() __initJan Beulich
It's sole user (pci_xen_swiotlb_init()) is __init, too. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <e1198286-99ec-41c1-b5ad-e04e285836c9@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13x86/xen: allow larger contiguous memory regions in PV guestsJuergen Gross
Today a PV guest (including dom0) can create 2MB contiguous memory regions for DMA buffers at max. This has led to problems at least with the megaraid_sas driver, which wants to allocate a 2.3MB DMA buffer. The limiting factor is the frame array used to do the hypercall for making the memory contiguous, which has 512 entries and is just a static array in mmu_pv.c. In order to not waste memory for non-PV guests, put the initial frame array into .init.data section and dynamically allocate an array from the .init_after_bootmem hook of PV guests. In case a contiguous memory area larger than the initially supported 2MB is requested, allocate a larger buffer for the frame list. Note that such an allocation is tried only after memory management has been initialized properly, which is tested via a flag being set in the .init_after_bootmem hook. Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13xen/swiotlb: relax alignment requirementsJuergen Gross
When mapping a buffer for DMA via .map_page or .map_sg DMA operations, there is no need to check the machine frames to be aligned according to the mapped areas size. All what is needed in these cases is that the buffer is contiguous at machine level. So carve out the alignment check from range_straddles_page_boundary() and move it to a helper called by xen_swiotlb_alloc_coherent() and xen_swiotlb_free_coherent() directly. Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13arm64: rust: clean Rust 1.85.0 warning using softfloat targetMiguel Ojeda
Starting with Rust 1.85.0 (to be released 2025-02-20), `rustc` warns [1] about disabling neon in the aarch64 hardfloat target: warning: target feature `neon` cannot be toggled with `-Ctarget-feature`: unsound on hard-float targets because it changes float ABI | = note: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release! = note: for more information, see issue #116344 <https://github.com/rust-lang/rust/issues/116344> Thus, instead, use the softfloat target instead. While trying it out, I found that the kernel sanitizers were not enabled for that built-in target [2]. Upstream Rust agreed to backport the enablement for the current beta so that it is ready for the 1.85.0 release [3] -- thanks! However, that still means that before Rust 1.85.0, we cannot switch since sanitizers could be in use. Thus conditionally do so. Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs). Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Matthew Maurer <mmaurer@google.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Ralf Jung <post@ralfj.de> Cc: Jubilee Young <workingjubilee@gmail.com> Link: https://github.com/rust-lang/rust/pull/133417 [1] Link: https://rust-lang.zulipchat.com/#narrow/channel/131828-t-compiler/topic/arm64.20neon.20.60-Ctarget-feature.60.20warning/near/495358442 [2] Link: https://github.com/rust-lang/rust/pull/135905 [3] Link: https://github.com/rust-lang/rust/issues/116344 Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Matthew Maurer <mmaurer@google.com> Reviewed-by: Ralf Jung <post@ralfj.de> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250210163732.281786-1-ojeda@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13arm64: Add missing registrations of hwcapsMark Brown
Commit 819935464cb2 ("arm64/hwcap: Describe 2024 dpISA extensions to userspace") added definitions for HWCAP_FPRCVT, HWCAP_F8MM8 and HWCAP_F8MM4 but did not include the crucial registration in arm64_elf_hwcaps. Add it. Fixes: 819935464cb2 ("arm64/hwcap: Describe 2024 dpISA extensions to userspace") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20250212-arm64-fix-2024-dpisa-v2-1-67a1c11d6001@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13ACPI: GTDT: Relax sanity checking on Platform Timers array countOliver Upton
Perhaps unsurprisingly there are some platforms where the GTDT isn't quite right and the Platforms Timer array overflows the length of the overall table. While the recently-added sanity checking isn't wrong, it makes it impossible to boot the kernel on offending platforms. Try to hobble along and limit the Platform Timer count to the bounds of the table. Cc: Marc Zyngier <maz@kernel.org> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Zheng Zengkai <zhengzengkai@huawei.com> Cc: stable@vger.kernel.org Fixes: 263e22d6bd1f ("ACPI: GTDT: Tighten the check for the array of platform timer structures") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20250128001749.3132656-1-oliver.upton@linux.dev Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13arm64: amu: Delay allocating cpumask for AMU FIE supportBeata Michalska
For the time being, the amu_fie_cpus cpumask is being exclusively used by the AMU-related internals of FIE support and is guaranteed to be valid on every access currently made. Still the mask is not being invalidated on one of the error handling code paths, which leaves a soft spot with theoretical risk of UAF for CPUMASK_OFFSTACK cases. To make things sound, delay allocating said cpumask (for CPUMASK_OFFSTACK) avoiding otherwise nasty sanitising case failing to register the cpufreq policy notifications. Signed-off-by: Beata Michalska <beata.michalska@arm.com> Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com> Reviewed-by: Sumit Gupta <sumitg@nvidia.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20250131155842.3839098-1-beata.michalska@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13drm: Fix DSC BPP increment decodingImre Deak
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can be non-zero as opposed to earlier DPCD versions, hence decoding the bit_per_pixel increment value at bits 2:0 in the same register requires applying a mask, do so. Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
2025-02-12Merge branch 'net-ethernet-ti-am65-cpsw-xdp-fixes'Jakub Kicinski
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: XDP fixes This series fixes memleak and statistics for XDP cases. ==================== Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-0-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP caseRoger Quadros
For XDP transmit case, swdata doesn't contain SKB but the XDP Frame. Infer the correct swdata based on buffer type and return the XDP Frame for XDP transmit case. Signed-off-by: Roger Quadros <rogerq@kernel.org> Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-3-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX caseRoger Quadros
For successful XDP_TX and XDP_REDIRECT cases, the packet was received successfully so update RX statistics. Use original received packet length for that. TX packets statistics are incremented on TX completion so don't update it while TX queueing. If xdp_convert_buff_to_frame() fails, increment tx_dropped. Signed-off-by: Roger Quadros <rogerq@kernel.org> Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-2-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net: ethernet: ti: am65-cpsw: fix memleak in certain XDP casesRoger Quadros
If the XDP program doesn't result in XDP_PASS then we leak the memory allocated by am65_cpsw_build_skb(). It is pointless to allocate SKB memory before running the XDP program as we would be wasting CPU cycles for cases other than XDP_PASS. Move the SKB allocation after evaluating the XDP program result. This fixes the memleak. A performance boost is seen for XDP_DROP test. XDP_DROP test: Before: 460256 rx/s 0 err/s After: 784130 rx/s 0 err/s Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-1-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13LoongArch: KVM: Set host with kernel mode when switch to VM modeBibo Mao
PRMD register is only meaningful on the beginning stage of exception entry, and it is overwritten with nested irq or exception. When CPU runs in VM mode, interrupt need be enabled on host. And the mode for host had better be kernel mode rather than random or user mode. When VM is running, the running mode with top command comes from CRMD register, and running mode should be kernel mode since kernel function is executing with perf command. It needs be consistent with both top and perf command. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: KVM: Remove duplicated cache attribute settingBibo Mao
Cache attribute comes from GPA->HPA secondary mmu page table and is configured when kvm is enabled. It is the same for all VMs, so remove duplicated cache attribute setting on vCPU context switch. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: KVM: Fix typo issue about GCFG feature detectionBibo Mao
This is typo issue and misusage about GCFG feature macro. The code is wrong, only that it does not cause obvious problem since GCFG is set again on vCPU context switch. Fixes: 0d0df3c99d4f ("LoongArch: KVM: Implement kvm hardware enable, disable interface") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: csum: Fix OoB access in IP checksum code for negative lengthsYuli Wang
Commit 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit system") would cause an undefined shift and an out-of-bounds read. Commit 8bd795fedb84 ("arm64: csum: Fix OoB access in IP checksum code for negative lengths") fixes the same issue on ARM64. Fixes: 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit system") Co-developed-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: Remove the deprecated notifier hook mechanismYuli Wang
The notifier hook mechanism in proc and cpuinfo is actually unnecessary for LoongArch because it's not used anywhere. It was originally added to the MIPS code in commit d6d3c9afaab4 ("MIPS: MT: proc: Add support for printing VPE and TC ids"), and LoongArch then inherited it. But as the kernel code stands now, this notifier hook mechanism doesn't really make sense for either LoongArch or MIPS. In addition, the seq_file forward declaration needs to be moved to its proper place, as only the show_ipi_list() function in smp.c requires it. Co-developed-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: Use str_yes_no() helper function for /proc/cpuinfoYuli Wang
Remove hard-coded strings by using the str_yes_no() helper function. Similar to commit c4a0a4a45a45 ("MIPS: kernel: proc: Use str_yes_no() helper function"). Co-developed-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGEHuacai Chen
Now kernel_page_present() always return true for KPRANGE/XKPRANGE addresses, this isn't correct because hibernation (ACPI S4) use it to distinguish whether a page is saveable. If all KPRANGE/XKPRANGE addresses are considered as saveable, then reserved memory such as EFI_RUNTIME_SERVICES_CODE / EFI_RUNTIME_SERVICES_DATA will also be saved and restored. Fix this by returning true only if the KPRANGE/XKPRANGE address is in memblock.memory. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: Fix idle VS timer enqueueMarco Crivellari
LoongArch re-enables interrupts on its idle routine and performs a TIF_NEED_RESCHED check afterwards before putting the CPU to sleep. The IRQs firing between the check and the idle instruction may set the TIF_NEED_RESCHED flag. In order to deal with such a race, IRQs interrupting __arch_cpu_idle() rollback their return address to the beginning of __arch_cpu_idle() so that TIF_NEED_RESCHED is checked again before going back to sleep. However idle IRQs can also queue timers that may require a tick reprogramming through a new generic idle loop iteration but those timers would go unnoticed here because __arch_cpu_idle() only checks TIF_NEED_RESCHED. It doesn't check for pending timers. Fix this with fast-forwarding idle IRQs return address to the end of the idle routine instead of the beginning, so that the generic idle loop can handle both TIF_NEED_RESCHED and pending timers. Fixes: 0603839b18f4 ("LoongArch: Add exception/interrupt handling") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-12Merge branch 'vsock-null-ptr-deref-when-so_linger-enabled'Jakub Kicinski
Michal Luczaj says: ==================== vsock: null-ptr-deref when SO_LINGER enabled syzbot pointed out that a recent patching of a use-after-free introduced a null-ptr-deref. This series fixes the problem and adds a test. v2: https://lore.kernel.org/20250206-vsock-linger-nullderef-v2-0-f8a1f19146f8@rbox.co v1: https://lore.kernel.org/20250204-vsock-linger-nullderef-v1-0-6eb1760fa93e@rbox.co ==================== Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-0-ef6244d02b54@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12vsock/test: Add test for SO_LINGER null ptr derefMichal Luczaj
Explicitly close() a TCP_ESTABLISHED (connectible) socket with SO_LINGER enabled. As for now, test does not verify if close() actually lingers. On an unpatched machine, may trigger a null pointer dereference. Tested-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-2-ef6244d02b54@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12vsock: Orphan socket after transport releaseMichal Luczaj
During socket release, sock_orphan() is called without considering that it sets sk->sk_wq to NULL. Later, if SO_LINGER is enabled, this leads to a null pointer dereferenced in virtio_transport_wait_close(). Orphan the socket only after transport release. Partially reverts the 'Fixes:' commit. KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] lock_acquire+0x19e/0x500 _raw_spin_lock_irqsave+0x47/0x70 add_wait_queue+0x46/0x230 virtio_transport_release+0x4e7/0x7f0 __vsock_release+0xfd/0x490 vsock_release+0x90/0x120 __sock_release+0xa3/0x250 sock_close+0x14/0x20 __fput+0x35e/0xa90 __x64_sys_close+0x78/0xd0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Reported-by: syzbot+9d55b199192a4be7d02c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9d55b199192a4be7d02c Fixes: fcdd2242c023 ("vsock: Keep the binding until socket destruction") Tested-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-1-ef6244d02b54@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12MAINTAINERS: Add sctp headers to the general netdev entryMarcelo Ricardo Leitner
All SCTP patches are picked up by netdev maintainers. Two headers were missing to be listed there. Reported-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/b3c2dc3a102eb89bd155abca2503ebd015f50ee0.1739193671.git.marcelo.leitner@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12Merge branch '200GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-02-11 (idpf, ixgbe, igc) For idpf: Sridhar fixes a couple issues in handling of RSC packets. Josh adds a call to set_real_num_queues() to keep queue count in sync. For ixgbe: Piotr removes missed IS_ERR() removal when ERR_PTR usage was removed. For igc: Zdenek Bouska fixes reporting of Rx timestamp with AF_XDP. Siang sets buffer type on empty frame to ensure proper handling. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: Set buffer type for empty frames in igc_init_empty_frame igc: Fix HW RX timestamp when passed by ZC XDP ixgbe: Fix possible skb NULL pointer dereference idpf: call set_real_num_queues in idpf_open idpf: record rx queue in skb for RSC packets idpf: fix handling rsc packet with a single segment ==================== Link: https://patch.msgid.link/20250211214343.4092496-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()Jiang Liu
It malicious user provides a small pptable through sysfs and then a bigger pptable, it may cause buffer overflow attack in function smu_sys_set_pp_table(). Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-02-12drm/amdkfd: Ensure consistent barrier state saved in gfx12 trap handlerLancelot SIX
It is possible for some waves in a workgroup to finish their save sequence before the group leader has had time to capture the workgroup barrier state. When this happens, having those waves exit do impact the barrier state. As a consequence, the state captured by the group leader is invalid, and is eventually incorrectly restored. This patch proposes to have all waves in a workgroup wait for each other at the end of their save sequence (just before calling s_endpgm_saved). Signed-off-by: Lancelot SIX <lancelot.six@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.12.x
generated by cgit (git 2.34.1) at 2025-04-05 02:52:56 +0000