| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.12-rc1
Here are the USB-serial updates for 5.12-rc1, including:
- a line-speed fix for newer pl2303 devices
- a line-speed fix for FTDI FT-X devices
- a new xr_serial driver for MaxLinear/Exar devices (non-ACM mode)
- a cdc-acm blacklist entry for when the xr_serial driver is enabled
- cp210x support for software flow control
- various cp210x modem-control fixes
- an updated ZTE P685M modem entry to stop claiming the QMI interface
- an update to drop the port_remove() driver-callback return value
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (41 commits)
USB: serial: drop bogus to_usb_serial_port() checks
USB: serial: make remove callback return void
USB: serial: drop if with an always false condition
USB: serial: option: update interface mapping for ZTE P685M
USB: serial: ftdi_sio: restore divisor-encoding comments
USB: serial: ftdi_sio: fix FTX sub-integer prescaler
USB: serial: cp210x: clean up auto-RTS handling
USB: serial: cp210x: fix RTS handling
USB: serial: cp210x: clean up printk zero padding
USB: serial: cp210x: clean up flow-control debug message
USB: serial: cp210x: drop shift macros
USB: serial: cp210x: fix modem-control handling
USB: serial: cp210x: suppress modem-control errors
USB: serial: mos7720: fix error code in mos7720_write()
USB: serial: xr: fix B0 handling
USB: serial: xr: fix pin configuration
USB: serial: xr: fix gpio-mode handling
USB: serial: xr: simplify line-speed logic
USB: serial: xr: clean up line-settings handling
USB: serial: xr: document vendor-request recipient
...
|
|
Move the last entry to its proper place to maintain the VID/PID sort
order.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The to_usb_serial_port() macro is implemented using container_of() so
there's no need to check for NULL.
Note that neither bus match() or probe() is ever called with a NULL
struct device pointer so the checks weren't just misplaced.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
All usb_serial drivers return 0 in their remove callbacks and driver
core ignores the value returned by usb_serial_device_remove(). So change
the remove callback to return void and return 0 unconditionally in
usb_serial_device_remove().
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208143149.963644-2-uwe@kleine-koenig.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
In a bus remove function the passed device is always valid, so there is
no need to check for it being NULL.
(Side note: The check for port being non-NULL is broken anyhow, because
to_usb_serial_port() is a wrapper around container_of() for a member that is
not the first one. So port can hardly become NULL.)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208143149.963644-1-uwe@kleine-koenig.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.12 merge window
This includes following Thunderbolt/USB4 changes for v5.12 merge
window:
* Start lane initialization after sleep for Thunderbolt 3 compatible
devices
* Add support for de-authorizing PCIe tunnels (software based
connection manager only)
* Add support for new ACPI 6.4 USB4 _OSC
* Allow disabling XDomain protocol
* Add support for new SL5 security level
* Clean up kernel-docs to pass W=1 builds
* A couple of cleanups and minor fixes
All these have been in linux-next without reported issues.
* tag 'thunderbolt-for-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (27 commits)
thunderbolt: Add support for native USB4 _OSC
ACPI: Add support for native USB4 control _OSC
ACPI: Execute platform _OSC also with query bit clear
thunderbolt: Allow disabling XDomain protocol
thunderbolt: Add support for PCIe tunneling disabled (SL5)
thunderbolt: dma_test: Drop unnecessary include
thunderbolt: Add clarifying comments about USB4 terms router and adapter
thunderbolt: switch: Fix kernel-doc descriptions of non-static functions
thunderbolt: nhi: Fix kernel-doc descriptions of non-static functions
thunderbolt: path: Fix kernel-doc descriptions of non-static functions
thunderbolt: eeprom: Fix kernel-doc descriptions of non-static functions
thunderbolt: ctl: Fix kernel-doc descriptions of non-static functions
thunderbolt: switch: Fix function name in the header
thunderbolt: tunnel: Fix misspelling of 'receive_path'
thunderbolt: icm: Fix a couple of formatting issues
thunderbolt: switch: Demote a bunch of non-conformant kernel-doc headers
thunderbolt: tb: Kernel-doc function headers should document their parameters
thunderbolt: nhi: Demote some non-conformant kernel-doc headers
thunderbolt: xdomain: Fix 'tb_unregister_service_driver()'s 'drv' param
thunderbolt: eeprom: Demote non-conformant kernel-doc headers to standard comment blocks
...
|
|
Fix the following coccicheck warnings:
./drivers/usb/gadget/udc/udc-xilinx.c:846:1-17: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612678696-15794-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit a079973f462a ("usb: typec: tcpm: Remove tcpc_config
configuration mechanism") removed the tcpc_config which includes the
Sink VDO and it is not yet added back with fwnode. Add it now.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-8-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add bindings of VDO properties of USB PD SVDM so that they can be
used in device tree.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-7-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
VDM header now requires SVDM Version. Get it from typec_partner.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-6-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch implements the following requirement in the Spec.
PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10
6.4.4.2.3 Structured VDM Version
"The Structured VDM Version field of the Discover Identity Command
sent and received during VDM discovery Shall be used to determine the
lowest common Structured VDM Version supported by the Port Partners or
Cable Plug and Shall continue to operate using this Specification
Revision until they are Detached."
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-5-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10
6.4.4.2.3 Structured VDM Version
"The Structured VDM Version field of the Discover Identity Command
sent and received during VDM discovery Shall be used to determine the
lowest common Structured VDM Version supported by the Port Partners or
Cable Plug and Shall continue to operate using this Specification
Revision until they are Detached."
Also clear the fields newly defined in SVDM version 2.0 if the
negotiated SVDM version is 1.0.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-4-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PD Rev 3.0 introduces SVDM Version 2.0. This patch makes the field
configuable in the header in order to be able to be compatible with
older SVDM version.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10
6.4.4.2.3 Structured VDM Version
"The Structured VDM Version field of the Discover Identity Command
sent and received during VDM discovery Shall be used to determine the
lowest common Structured VDM Version supported by the Port Partners or
Cable Plug and Shall continue to operate using this Specification
Revision until they are Detached."
Add a variable in typec_capability to specify the highest SVDM version
supported by the port and another variable in typec_partner to cache the
negotiated SVDM version between the port and the partner.
Also add setter/getter functions for the negotiated SVDM version.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-2-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dep->interval captures the number of frames/microframes per interval
from bInterval. Fullspeed interrupt endpoint bInterval is the number of
frames per interval and not 2^(bInterval - 1). So fix it here. This
change is only for debugging purpose and should not affect the interrupt
endpoint operation.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1263b563dedc4ab8b0fb854fba06ce4bc56bd495.1612820995.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it must be set
to 0 when the controller operates in full-speed. See the programming
guide for DEPCFG command section 3.2.2.1 (v3.30a).
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3f57026f993c0ce71498dbb06e49b3a47c4d0265.1612820995.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
In v5.12-rc1, it adds cdnsp drivers for Cadence USB3 Family,
it is different UDC driver with current cdns3 driver.
* tag 'usb-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: (23 commits)
usb: cdnsp: Removes some useless trace events
usb: cdns3: Add support for TI's AM64 SoC
usb: cdnsp: fixes undefined reference to cdns_remove
usb: cdns3: Adds missing __iomem markers
usb: cdnsp: Fix for undefined reference to `usb_hcd_is_primary_hcd'
usb: cdnsp: Fixes for sparse warnings
usb: cdns3: Fixes for sparse warnings
usb: cdnsp: fix error handling in cdnsp_mem_init()
usb: cdns3: Removes xhci_cdns3_suspend_quirk from host-export.h
usb: cdnsp: Removes some not useful function arguments
usb: cdns3: fix warning when USB_CDNS_HOST is not set
usb: cdns3: fix build when PM_SLEEP is not set
usb: cdnsp: Mark cdnsp_gadget_ops with static keyword
MAINTAINERS: add Cadence USBSSP DRD IP driver entry
usb: cdns3: Change file names for cdns3 driver.
usb: cdnsp: Add tracepoints for CDNSP driver
usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver
usb: cdnsp: Device side header file for CDNSP driver
usb: cdns3: Changed type of gadget_dev in cdns structure
usb: cdns3: Refactoring names in reusable code
...
|
|
This patch prepares for qmi_wwan driver support for the device.
Previously "option" driver mapped itself to interfaces 0 and 3 (matching
ff/ff/ff), while interface 3 is in fact a QMI port.
Interfaces 1 and 2 (matching ff/00/00) expose AT commands,
and weren't supported previously at all.
Without this patch, a possible conflict would exist if device ID was
added to qmi_wwan driver for interface 3.
Update and simplify device ID to match interfaces 0-2 directly,
to expose QCDM (0), PCUI (1), and modem (2) ports and avoid conflict
with QMI (3), and ADB (4).
The modem is used inside ZTE MF283+ router and carriers identify it as
such.
Interface mapping is:
0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB
T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1275 Rev=f0.00
S: Manufacturer=ZTE,Incorporated
S: Product=ZTE Technologies MSM
S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: Johan Hovold <johan@kernel.org>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20210207005443.12936-1-lech.perczak@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for a crash scenario that has been present since the initial
merge, a minor regression in sysfs attribute visibility, and a fix for
some flexible array warnings.
The bulk of this pull is an update to the libnvdimm unit test
infrastructure to test non-ACPI platforms. Given there is zero
regression risk for test updates, and the tests enable validation of
bits headed towards the next merge window, I saw no reason to hold the
new tests back. Santosh originally submitted this before the v5.11
window opened.
Summary:
- Fix a crash when sysfs accesses race 'dimm' driver probe/remove.
- Fix a regression in 'resource' attribute visibility necessary for
mapping badblocks and other physical address interrogations.
- Fix some flexible array warnings
- Expand the unit test infrastructure for non-ACPI platforms"
* tag 'libnvdimm-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/dimm: Avoid race between probe and available_slots_show()
ndtest: Add papr health related flags
ndtest: Add nvdimm control functions
ndtest: Add regions and mappings to the test buses
ndtest: Add dimm attributes
ndtest: Add dimms to the two buses
ndtest: Add compatability string to treat it as PAPR family
testing/nvdimm: Add test module for non-nfit platforms
libnvdimm/namespace: Fix visibility of namespace resource attribute
libnvdimm/pmem: Remove unused header
ACPI: NFIT: Fix flexible_array.cocci warnings
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Fix a 32 vs 64-bit padding issue in the new benchmark code (Barry
Song)"
* tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: use u8 for reserved field in uAPI structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Prevent device managed IRQ allocation helpers from returning IRQ 0
- A fix for MSI activation of PCI endpoints with multiple MSIs
* tag 'irq_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Prevent [devm_]irq_alloc_desc from returning irq 0
genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull syscall entry fixes from Borislav Petkov:
- For syscall user dispatch, separate prctl operation from syscall
redirection range specification before the API has been made official
in 5.11.
- Ensure tasks using the generic syscall code do trap after returning
from a syscall when single-stepping is requested.
* tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Use different define for selector variable in SUD
entry: Ensure trap after single-step on system call return
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
"Revert an attempt to not spread IRQ threads on isolated CPUs which has
a bunch of problems"
* tag 'sched_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "lib: Restrict cpumask_local_spread to houskeeping CPUs"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
"Two more timers-related fixes for v5.11:
- Use a freezable workqueue for RTC sync because the sync can happen
at any time and trigger suspend assertion checks in the i2c
subsystem.
- Correct a previous RTC validation change to check only bit 6 in
register D because some Intel machines use bits 0-5"
* tag 'timers_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ntp: Use freezable workqueue for RTC synchronization
rtc: mc146818: Dont test for bit 0-5 in Register D
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"I hope this is the last batch of x86/urgent updates for this round:
- Remove superfluous EFI PGD range checks which lead to those
assertions failing with certain kernel configs and LLVM.
- Disable setting breakpoints on facilities involved in #DB exception
handling to avoid infinite loops.
- Add extra serialization to non-serializing MSRs (IA32_TSC_DEADLINE
and x2 APIC MSRs) to adhere to SDM's recommendation and avoid any
theoretical issues.
- Re-add the EPB MSR reading on turbostat so that it works on older
kernels which don't have the corresponding EPB sysfs file.
- Add Alder Lake to the list of CPUs which support split lock.
- Fix %dr6 register handling in order to be able to set watchpoints
with gdb again.
- Disable CET instrumentation in the kernel so that gcc doesn't add
ENDBR64 to kernel code and thus confuse tracing"
* tag 'x86_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Remove EFI PGD build time checks
x86/debug: Prevent data breakpoints on cpu_dr7
x86/debug: Prevent data breakpoints on __per_cpu_offset
x86/apic: Add extra serialization for non-serializing MSRs
tools/power/turbostat: Fallback to an MSR read for EPB
x86/split_lock: Enable the split lock feature on another Alder Lake CPU
x86/debug: Fix DR6 handling
x86/build: Disable CET instrumentation in the kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the 'python3' command to invoke python scripts because some
distributions do not provide the 'python' command any more.
- Clean-up and update documents
- Use pkg-config to search libcrypto
- Fix duplicated debug flags
- Ignore some more stubs in scripts/kallsyms.c
* tag 'kbuild-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kallsyms: fix nonconverging kallsyms table with lld
kbuild: fix duplicated flags in DEBUG_CFLAGS
scripts/clang-tools: switch explicitly to Python 3
kbuild: remove PYTHON variable
Documentation/llvm: Add a section about supported architectures
Revert "checkpatch: add check for keyword 'boolean' in Kconfig definitions"
scripts: use pkg-config to locate libcrypto
kconfig: mconf: fix HOSTCC call
doc: gcc-plugins: update gcc-plugins.rst
kbuild: simplify GCC_PLUGINS enablement in dummy-tools/gcc
Documentation/Kbuild: Remove references to gcc-plugin.sh
scripts: switch explicitly to Python 3
|
|
Pull cifs fixes from Steve French:
"Three small smb3 fixes for stable"
* tag '5.11-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: report error instead of invalid when revalidating a dentry fails
smb3: fix crediting for compounding when only one request in flight
smb3: Fix out-of-bounds bug in SMB2_negotiate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for this week:
- A fix to avoid evalating the VA twice in virt_addr_valid, which
fixes some WARNs under DEBUG_VIRTUAL.
- Two fixes related to STRICT_KERNEL_RWX: one that fixes some
permissions when strict is disabled, and one to fix some alignment
issues when strict is enabled.
- A fix to disallow the selection of MAXPHYSMEM_2GB on RV32, which
isn't valid any more but may still show up in some oldconfigs.
We still have the HiFive Unleashed ethernet phy reset regression, so
there will likely be something coming next week"
* tag 'riscv-for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Define MAXPHYSMEM_1GB only for RV32
riscv: Align on L1_CACHE_BYTES when STRICT_KERNEL_RWX
RISC-V: Fix .init section permission update
riscv: virt_addr_valid must check the address belongs to linear mapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a change we made to __kernel_sigtramp_rt64() which confused
glibc's backtrace logic, and also changed the semantics of that
symbol, which was arguably an ABI break.
- A fix for a stack overwrite in our VSX instruction emulation.
- A couple of fixes for the Makefile logic in the new C VDSO.
Thanks to Masahiro Yamada, Naveen N. Rao, Raoni Fassina Firmino, and
Ravi Bangoria.
* tag 'powerpc-5.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics
powerpc/vdso64: remove meaningless vgettimeofday.o build rule
powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o
powerpc/sstep: Fix array out of bound warning
|
|
Pull ARM fixes from Russell King:
- Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
accessors that affects GCC >= 4.9.2
- Fix misplaced tegra_uart_config in decompressor
- Ensure signal page contents are initialised
- Fix kexec oops
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: kexec: fix oops after TLB are invalidated
ARM: ensure the signal page contains defined contents
ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
ARM: footbridge: fix dc21285 PCI configuration accessors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small, last-minute, USB driver fixes for 5.11-rc7
They all resolve issues reported, or are a few new device ids for some
drivers. They include:
- new device ids for some usb-serial drivers
- xhci fixes for a variety of reported problems
- dwc3 driver bugfixes
- dwc2 driver bugfixes
- usblp driver bugfix
- thunderbolt bugfix
- few other tiny fixes
All have been in linux-next with no reported issues"
* tag 'usb-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc2: Fix endpoint direction check in ep_from_windex
usb: dwc3: fix clock issue during resume in OTG mode
xhci: fix bounce buffer usage for non-sg list case
usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720
usb: xhci-mtk: break loop when find the endpoint to drop
usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints
usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()
USB: gadget: legacy: fix an error code in eth_bind()
thunderbolt: Fix possible NULL pointer dereference in tb_acpi_add_link()
USB: serial: option: Adding support for Cinterion MV31
usb: xhci-mtk: fix unreleased bandwidth data
usb: gadget: aspeed: add missing of_node_put
USB: usblp: don't call usb_set_interface if there's a single alt
USB: serial: cp210x: add pid/vid for WSDA-200-USB
USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Nothing terribly interesting, just a few fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - sync supported devices with fork on GitHub
Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table
Input: goodix - add support for Goodix GT9286 chip
dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC
dt-bindings: input: adc-keys: clarify description
Input: ili210x - implement pressure reporting for ILI251x
Input: i8042 - unbreak Pegatron C15B
Input: st1232 - wait until device is ready before reading resolution
Input: st1232 - do not read more bytes than needed
Input: st1232 - fix off-by-one error in resolution handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One fix in drivers (lpfc) that stops an oops on resource exhaustion"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Fix EEH encountering oops with NVMe traffic
|
|
Pull block fixes from Jens Axboe:
"A few small regression fixes:
- NVMe pull request from Christoph:
- more quirks for buggy devices (Thorsten Leemhuis, Claus Stovgaard)
- update the email address for Keith (Keith Busch)
- fix an out of bounds access in nvmet-tcp (Sagi Grimberg)
- Regression fix for BFQ shallow depth calculations introduced in
this merge window (Lin)"
* tag 'block-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUs
bfq-iosched: Revert "bfq: Fix computation of shallow depth"
update the email address for Keith Bush
nvme-pci: ignore the subsysem NQN on Phison E16
nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs
|
|
Pull io_uring fixes from Jens Axboe:
"Two small fixes that should go into 5.11:
- task_work resource drop fix (Pavel)
- identity COW fix (Xiaoguang)"
* tag 'io_uring-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
io_uring: drop mm/files between task_work_submit
io_uring: don't modify identity's files uncess identity is cowed
|
|
The check for bounded gadget driver in dwc3_gadget_start() was to
prevent going through the initialization again without any cleanup. The
recent commit 49d08cfc7830 ("usb: udc: core: Introduce started state")
updated the UDC framework and guarantees this won't happen while the UDC
is started. Also, this check doesn't prevent requesting threaded irq to
the same dev_id, which will mess up the irq freeing logic. Let's remove
it.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ccc90f316cf78bb5f7d46d3fd84f4c7f2c3020b1.1612518764.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The setting of the device speed should be limited by the device's
maximum_speed. Check and prevent the driver from attempting to configure
higher than the maximum_speed.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/4fae4a9ebb60464d64d8b8f6fdfc2777a2206a69.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Track the number of connected lanes and speed in corresponding enum
usb_ssp_rate for SuperSpeed Plus capable device.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/2389592188d2e37a2ee45edaf04d942b19f3af82.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement gadget ops udc_set_ssp_rate(). This allows the gadget/core
driver to select SSP signaling rate and number of lanes to for DWC_usb32
controller.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/8998b65fddfa02cab57bfc6aa35e9f101b252068.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWC_usb32 controller supports dual-lane SuperSpeed Plus. Check the
maximum_speed property for any limitation in the HW to initialize and
validate the maximum number of lanes and speed the device will operate.
Currently the controller has no visibility into the HW parameter to
determine the maximum number of lanes the HW supports. If the number of
lanes is not specified for SSP, then set the default rate to gen2x2 for
DWC_usb32 and gen2x1 for DWC_usb31.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/08d43f2a99198bed84895c272340449a6d03710e.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB "maximum-speed" property can now take the SSP signaling rate
generation and lane count with these new strings:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
Introduce usb_get_maximum_ssp_rate() to parse for the corresponding
usb_ssp_rate enum. The original usb_get_maximum_speed() will return
USB_SPEED_SUPER_PLUS if it matches one of these new strings.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f8ed896313d8cd8e2d2b540fc82db92b3ddf8a47.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the USB 3.2 spec, a SuperSpeed Plus device can operate at
gen2x2, gen2x1, or gen1x2. If the USB controller device supports
multiple lanes at different transfer rates, the user can specify the HW
capability via these new speed strings:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
If the argument is simply "super-speed-plus", USB controllers should
default to their maximum transfer rate and number of lanes.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cc7cc15f87e209c9963f19129f51398cdc374358.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With CONFIG_X86_5LEVEL, CONFIG_UBSAN and CONFIG_UBSAN_UNSIGNED_OVERFLOW
enabled, clang fails the build with
x86_64-linux-ld: arch/x86/platform/efi/efi_64.o: in function `efi_sync_low_kernel_mappings':
efi_64.c:(.text+0x22c): undefined reference to `__compiletime_assert_354'
which happens due to -fsanitize=unsigned-integer-overflow being enabled:
-fsanitize=unsigned-integer-overflow: Unsigned integer overflow, where
the result of an unsigned integer computation cannot be represented
in its type. Unlike signed integer overflow, this is not undefined
behavior, but it is often unintentional. This sanitizer does not check
for lossy implicit conversions performed before such a computation
(see -fsanitize=implicit-conversion).
and that fires when the (intentional) EFI_VA_START/END defines overflow
an unsigned long, leading to the assertion expressions not getting
optimized away (on GCC they do)...
However, those checks are superfluous: the runtime services mapping
code already makes sure the ranges don't overshoot EFI_VA_END as the
EFI mapping range is hardcoded. On each runtime services call, it is
switched to the EFI-specific PGD and even if mappings manage to escape
that last PGD, this won't remain unnoticed for long.
So rip them out.
See https://github.com/ClangBuiltLinux/linux/issues/256 for more info.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: http://lkml.kernel.org/r/20210107223424.4135538-1-arnd@kernel.org
|
|
Patch removes some useless trace events that can
be replaced by ftrace.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
Michael Kerrisk suggested that, from an API perspective, it is a bad
idea to share the PR_SYS_DISPATCH_ defines between the prctl operation
and the selector variable.
Therefore, define two new constants to be used by SUD's selector variable
and update the corresponding documentation and test cases.
While this changes the API syscall user dispatch has never been part of a
Linux release, it will show up for the first time in 5.11.
Suggested-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com
|
|
Commit 299155244770 ("entry: Drop usage of TIF flags in the generic syscall
code") introduced a bug on architectures using the generic syscall entry
code, in which processes stopped by PTRACE_SYSCALL do not trap on syscall
return after receiving a TIF_SINGLESTEP.
The reason is that the meaning of TIF_SINGLESTEP flag is overloaded to
cause the trap after a system call is executed, but since the above commit,
the syscall call handler only checks for the SYSCALL_WORK flags on the exit
work.
Split the meaning of TIF_SINGLESTEP such that it only means single-step
mode, and create a new type of SYSCALL_WORK to request a trap immediately
after a syscall in single-step mode. In the current implementation, the
SYSCALL_WORK flag shadows the TIF_SINGLESTEP flag for simplicity.
Update x86 to flip this bit when a tracer enables single stepping.
Fixes: 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Link: https://lore.kernel.org/r/87h7mtc9pr.fsf_-_@collabora.com
|
|
This reverts commit 1abdfe706a579a702799fce465bceb9fb01d407c.
This change is broken and not solving any problem it claims to solve.
Robin reported that cpumask_local_spread() now returns any cpu out of
cpu_possible_mask in case that NOHZ_FULL is disabled (runtime or compile
time). It can also return any offline or not-present CPU in the
housekeeping mask. Before that it was returning a CPU out of
online_cpu_mask.
While the function is racy against CPU hotplug if the caller does not
protect against it, the actual use cases are not caring much about it as
they use it mostly as hint for:
- the user space affinity hint which is unused by the kernel
- memory node selection which is just suboptimal
- network queue affinity which might fail but is handled gracefully
But the occasional fail vs. hotplug is very different from returning
anything from possible_cpu_mask which can have a large amount of offline
CPUs obviously.
The changelog of the commit claims:
"The current implementation of cpumask_local_spread() does not respect
the isolated CPUs, i.e., even if a CPU has been isolated for Real-Time
task, it will return it to the caller for pinning of its IRQ
threads. Having these unwanted IRQ threads on an isolated CPU adds up
to a latency overhead."
The only correct part of this changelog is:
"The current implementation of cpumask_local_spread() does not respect
the isolated CPUs."
Everything else is just disjunct from reality.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: abelits@marvell.com
Cc: davem@davemloft.net
Link: https://lore.kernel.org/r/87y2g26tnt.fsf@nanos.tec.linutronix.de
|
|
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (hugetlb, compaction,
vmalloc, shmem, memblock, pagecache, kasan, and hugetlb), mailmap,
gcov, ubsan, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS/.mailmap: use my @kernel.org address
mm: hugetlb: fix missing put_page in gather_surplus_pages()
ubsan: implement __ubsan_handle_alignment_assumption
kasan: make addr_has_metadata() return true for valid addresses
kasan: add explicit preconditions to kasan_report()
mm/filemap: add missing mem_cgroup_uncharge() to __add_to_page_cache_locked()
mailmap: add entries for Manivannan Sadhasivam
mailmap: fix name/email for Viresh Kumar
memblock: do not start bottom-up allocations with kernel_end
mm: thp: fix MADV_REMOVE deadlock on shmem THP
init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcov
mm/vmalloc: separate put pages and flush VM flags
mm, compaction: move high_pfn to the for loop scope
mm: migrate: do not migrate HugeTLB page whose refcount is one
mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active
mm: hugetlb: fix a race between isolating and freeing page
mm: hugetlb: fix a race between freeing and dissolving the page
mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page
|
