| Age | Commit message (Collapse) | Author |
|---|
|
wrapper
Incidentally, ITER_XARRAY did *not* free the sucker in case when
iter_xarray_populate_pages() returned 0...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All their callers are next to each other; all of them
want the total amount of pages and, possibly, the
offset in the partial final buffer.
Combine into a new helper (pipe_npages()), fix the
bogosity in pipe_space_for_user(), while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fold pipe_truncate() into it, clean up. We can release buffers
in the same loop where we walk backwards to the iterator beginning
looking for the place where the new position will be.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
instead of setting ->iov_offset for new position and calling
pipe_truncate() to adjust ->len of the last buffer and discard
everything after it, adjust ->len at the same time we set ->iov_offset
and use pipe_discard_from() to deal with buffers past that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it's only used to get to the partial buffer we can add to,
and that's always the last one, i.e. pipe->head - 1.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Expand the only remaining call of push_pipe() (in
__pipe_get_pages()), combine it with the page-collecting loop there.
Note that the only reason it's not a loop doing append_pipe() is
that append_pipe() is advancing, while iov_iter_get_pages() is not.
As soon as it switches to saner semantics, this thing will switch
to using append_pipe().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
New helper: append_pipe(). Extends the last buffer if possible,
allocates a new one otherwise. Returns page and offset in it
on success, NULL on failure. iov_iter is advanced past the
data we've got.
Use that instead of push_pipe() in copy-to-pipe primitives;
they get simpler that way. Handling of short copy (in "mc" one)
is done simply by iov_iter_revert() - iov_iter is in consistent
state after that one, so we can use that.
[Fix for braino caught by Liu Xinpeng <liuxp11@chinatelecom.cn> folded in]
[another braino fix, this time in copy_pipe_to_iter() and pipe_zero();
caught by testcase from Hugh Dickins]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There are only two kinds of pipe_buffer in the area used by ITER_PIPE.
1) anonymous - copy_to_iter() et.al. end up creating those and copying
data there. They have zero ->offset, and their ->ops points to
default_pipe_page_ops.
2) zero-copy ones - those come from copy_page_to_iter(), and page
comes from caller. ->offset is also caller-supplied - it might be
non-zero. ->ops points to page_cache_pipe_buf_ops.
Move creation and insertion of those into helpers - push_anon(pipe, size)
and push_page(pipe, page, offset, size) resp., separating them from
the "could we avoid creating a new buffer by merging with the current
head?" logics.
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
pipe_buffer instances of a pipe are organized as a ring buffer,
with power-of-2 size. Indices are kept *not* reduced modulo ring
size, so the buffer refered to by index N is
pipe->bufs[N & (pipe->ring_size - 1)].
Ring size can change over the lifetime of a pipe, but not while
the pipe is locked. So for any iov_iter primitives it's a constant.
Original conversion of pipes to this layout went overboard trying
to microoptimize that - calculating pipe->ring_size - 1, storing
it in a local variable and using through the function. In some
cases it might be warranted, but most of the times it only
obfuscates what's going on in there.
Introduce a helper (pipe_buf(pipe, N)) that would encapsulate
that and use it in the obvious cases. More will follow...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use pipe_discard_from() explicitly in generic_file_read_iter(); don't bother
with rather non-obvious use of iov_iter_advance() in there.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc,
with the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is
also introduced, to avoid out-of-sync updates for rapidly restarting
remote processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces
a number of smaller fixes and cleanups in the core and a few different
drivers"
* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
drivers/remoteproc: fix repeated words in comments
remoteproc: Directly use ida_alloc()/free()
remoteproc: Use unbounded workqueue for recovery work
remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
remoteproc: sysmon: Send sysmon state only for running rprocs
remoteproc: sysmon: Wait for SSCTL service to come up
remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: qcom: pas: Mark devices as wakeup capable
remoteproc: qcom: pas: Mark va as io memory
remoteproc: qcom: pas: Add decrypt shutdown support for modem
remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
remoteproc: qcom_q6v5: Introduce panic handler for MSS
remoteproc: qcom_q6v5_mss: Update MBA log info
remoteproc: qcom: correct kerneldoc
remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
remoteproc: mediatek: Support MT8188 SCP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and
GLINK drivers, a circular lock dependency in the Mediatek driver and
a possible race condition in the rpmsg_char driver is resolved"
* tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: convert sysfs snprintf to sysfs_emit
rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge
rpmsg: qcom: correct kerneldoc
rpmsg: qcom: glink: remove unused name
rpmsg: qcom: glink: replace strncpy() with strscpy_pad()
rpmsg: Strcpy is not safe, use strscpy_pad() instead
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
rpmsg: Fix parameter naming for announce_create/destroy ops
rpmsg: mtk_rpmsg: Fix circular locking dependency
rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add RTL9310 support
- sp805_wdt: add arm cmsdk apb wdt support
- Remove #ifdef guards for PM related functions for several watchdog
device drivers
- pm8916_wdt reboot improvements
- Several other fixes and improvements
* tag 'linux-watchdog-5.20-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe()
watchdog: dw_wdt: Fix comment typo
watchdog: Fix comment typo
dt-bindings: watchdog: Add fsl,scu-wdt yaml file
watchdog:Fix typo in comment
watchdog: pm8916_wdt: Handle watchdog enabled by bootloader
watchdog: pm8916_wdt: Report reboot reason
watchdog: pm8916_wdt: Avoid read of write-only PET register
watchdog: wdat_wdt: Remove #ifdef guards for PM related functions
watchdog: tegra_wdt: Remove #ifdef guards for PM related functions
watchdog: st_lpc_wdt: Remove #ifdef guards for PM related functions
watchdog: sama5d4_wdt: Remove #ifdef guards for PM related functions
watchdog: s3c2410_wdt: Remove #ifdef guards for PM related functions
watchdog: mtk_wdt: Remove #ifdef guards for PM related functions
watchdog: dw_wdt: Remove #ifdef guards for PM related functions
watchdog: bcm7038_wdt: Remove #ifdef guards for PM related functions
watchdog: realtek-otto: add RTL9310 support
dt-bindings: watchdog: realtek,otto-wdt: add RTL9310
watchdog: sp805_wdt: add arm cmsdk apb wdt support
watchdog: sp5100_tco: Fix a memory leak of EFCH MMIO resource
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix an error code path issue leading to a NULL pointer
dereference, drop Kconfig dependencies that are not needed any more
after recent changes, add CPU IDs for new chips to a driver and fix up
the tmon utility.
Specifics:
- Fix NULL pointer dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Make the Intel TCC cooling driver support Alder Lake-N and Raptor
Lake-P (Sumeet Pawnikar).
- Fix possible path truncations in the tmon utility (Florian
Fainelli)"
* tag 'thermal-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix possible path truncations
thermal: Drop obsolete dependency on COMPILE_TEST
thermal: sysfs: Fix cooling_device_stats_setup() error code path
thermal: intel: Add TCC cooling support for Alder Lake-N and Raptor Lake-P
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"There isn't much for 6.0 for sysctl stuff, most of the stuff went
through the networking subsystem (Kuniyuki Iwashima's trove of fixes
using READ_ONCE/WRITE_ONCE helpers) as most of the issues there have
been identified on networking side. So it is good we don't have much
updates as we would have ended up with tons of conflicts. I rebased my
delta just now to your tree so to avoid conflicts with that stuff.
This merge request is just minor fluff cleanups then. Perhaps for 6.1
kernel/sysctl.c will get more love than this release"
* tag 'sysctl-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kernel/sysctl.c: Remove trailing white space
kernel/sysctl.c: Clean up indentation, replace spaces with tab.
sysctl: Merge adjacent CONFIG_TREE_RCU blocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"For the 6.0 merge window the modules code shifts to cleanup and minor
fixes effort. This becomes much easier to do and review now due to the
code split to its own directory from effort on the last kernel
release. I expect to see more of this with time and as we expand on
test coverage in the future. The cleanups and fixes come from usual
suspects such as Christophe Leroy and Aaron Tomlin but there are also
some other contributors.
One particular minor fix worth mentioning is from Helge Deller, where
he spotted a *forever* incorrect natural alignment on both ELF section
header tables:
* .altinstructions
* __bug_table sections
A lot of back and forth went on in trying to determine the ill effects
of this misalignment being present for years and it has been
determined there should be no real ill effects unless you have a buggy
exception handler. Helge actually hit one of these buggy exception
handlers on parisc which is how he ended up spotting this issue. When
implemented correctly these paths with incorrect misalignment would
just mean a performance penalty, but given that we are dealing with
alternatives on modules and with the __bug_table (where info regardign
BUG()/WARN() file/line information associated with it is stored) this
really shouldn't be a big deal.
The only other change with mentioning is the kmap() with
kmap_local_page() and my only concern with that was on what is done
after preemption, but the virtual addresses are restored after
preemption. This is only used on module decompression.
This all has sit on linux-next for a while except the kmap stuff which
has been there for 3 weeks"
* tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Replace kmap() with kmap_local_page()
module: Show the last unloaded module's taint flag(s)
module: Use strscpy() for last_unloaded_module
module: Modify module_flags() to accept show_state argument
module: Move module's Kconfig items in kernel/module/
MAINTAINERS: Update file list for module maintainers
module: Use vzalloc() instead of vmalloc()/memset(0)
modules: Ensure natural alignment for .altinstructions and __bug_table sections
module: Increase readability of module_kallsyms_lookup_name()
module: Fix ERRORs reported by checkpatch.pl
module: Add support for default value for module async_probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"A new driver for bcm63138, is31fl319x updates, fixups for multicolor.
The clevo-mail driver got disabled, it needs an API fix"
* tag 'leds-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (23 commits)
leds: is31fl319x: use simple i2c probe function
leds: is31fl319x: Fix devm vs. non-devm ordering
leds: is31fl319x: Make use of dev_err_probe()
leds: is31fl319x: Make use of device properties
leds: is31fl319x: Cleanup formatting and dev_dbg calls
leds: is31fl319x: Add support for is31fl319{0,1,3} chips
leds: is31fl319x: Move chipset-specific values in chipdef struct
leds: is31fl319x: Use non-wildcard names for vars, structs and defines
leds: is31fl319x: Add missing si-en compatibles
dt-bindings: leds: pwm-multicolor: document max-brigthness
leds: turris-omnia: convert to use dev_groups
leds: leds-bcm63138: get rid of LED_OFF
leds: add help info about BCM63138 module name
dt-bindings: leds: leds-bcm63138: unify full stops in descriptions
dt-bindings: leds: lp50xx: fix LED children names
dt-bindings: leds: class-multicolor: reference class directly in multi-led node
leds: bcm63138: add support for BCM63138 controller
dt-bindings: leds: add Broadcom's BCM63138 controller
leds: clevo-mail: Mark as broken pending interface fix
leds: pwm-multicolor: Support active-low LEDs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we mainly fixed some corner cases that manipulate a
per-file compression flag inappropriately. And, we found f2fs counted
valid blocks in a section incorrectly when zone capacity is set, and
thus, fixed it with additional sysfs entry to check it easily.
Lastly, this series includes several patches with respect to the new
atomic write support such as a couple of bug fixes and re-adding
atomic_write_abort support that we removed by mistake in the previous
release.
Enhancements:
- add sysfs entries to understand atomic write operations and zone
capacity
- introduce memory mode to get a hint for low-memory devices
- adjust the waiting time of foreground GC
- decompress clusters under softirq to avoid non-deterministic
latency
- do not skip updating inode when retrying to flush node page
- enforce single zone capacity
Bug fixes:
- set the compression/no-compression flags correctly
- revive F2FS_IOC_ABORT_VOLATILE_WRITE
- check inline_data during compressed inode conversion
- understand zone capacity when calculating valid block count
As usual, the series includes several minor clean-ups and sanity
checks"
* tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: use onstack pages instead of pvec
f2fs: intorduce f2fs_all_cluster_page_ready
f2fs: clean up f2fs_abort_atomic_write()
f2fs: handle decompress only post processing in softirq
f2fs: do not allow to decompress files have FI_COMPRESS_RELEASED
f2fs: do not set compression bit if kernel doesn't support
f2fs: remove device type check for direct IO
f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
f2fs: revive F2FS_IOC_ABORT_VOLATILE_WRITE
f2fs: fix to do sanity check on segment type in build_sit_entries()
f2fs: obsolete unused MAX_DISCARD_BLOCKS
f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time
f2fs: introduce sysfs atomic write statistics
f2fs: don't bother wait_ms by foreground gc
f2fs: invalidate meta pages only for post_read required inode
f2fs: allow compression of files without blocks
f2fs: fix to check inline_data during compressed inode conversion
f2fs: Delete f2fs_copy_page() and replace with memcpy_page()
f2fs: fix to invalidate META_MAPPING before DIO write
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix an issue with reusing the bdi in case of block based filesystems
- Allow root (in init namespace) to access fuse filesystems in user
namespaces if expicitly enabled with a module param
- Misc fixes
* tag 'fuse-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: retire block-device-based superblock on force unmount
vfs: function to prevent re-use of block-device-based superblocks
virtio_fs: Modify format for virtio_fs_direct_access
virtiofs: delete unused parameter for virtio_fs_cleanup_vqs
fuse: Add module param for CAP_SYS_ADMIN access bypassing allow_other
fuse: Remove the control interface for virtio-fs
fuse: ioctl: translate ENOSYS
fuse: limit nsec
fuse: avoid unnecessary spinlock bump
fuse: fix deadlock between atomic O_TRUNC and page invalidation
fuse: write inode in fuse_release()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
"Just a small update"
* tag 'ovl-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix spelling mistakes
ovl: drop WARN_ON() dentry is NULL in ovl_encode_fh()
ovl: improve ovl_get_acl() if POSIX ACL support is off
ovl: fix some kernel-doc comments
ovl: warn if trusted xattr creation fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- fix the error code of rename syscall
- cleanup and suppress the superfluous error messages
- remove duplicate directory entry update
- add exfat git tree in MAINTAINERS
* tag 'exfat-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
MAINTAINERS: Add Namjae's exfat git tree
exfat: Drop superfluous new line for error messages
exfat: Downgrade ENAMETOOLONG error message to debug messages
exfat: Expand exfat_err() and co directly to pr_*() macro
exfat: Define NLS_NAME_* as bit flags explicitly
exfat: Return ENAMETOOLONG consistently for oversized paths
exfat: remove duplicate write inode for extending dir/file
exfat: remove duplicate write inode for truncating file
exfat: reuse __exfat_write_inode() to update directory entry
|
|
If something manages to set the maximum file size to MAX_OFFSET+1, this
can cause the xfs and ext4 filesystems at least to become corrupt.
Ordinarily, the kernel protects against userspace trying this by
checking the value early in the truncate() and ftruncate() system calls
calls - but there are at least two places that this check is bypassed:
(1) Cachefiles will round up the EOF of the backing file to DIO block
size so as to allow DIO on the final block - but this might push
the offset negative. It then calls notify_change(), but this
inadvertently bypasses the checking. This can be triggered if
someone puts an 8EiB-1 file on a server for someone else to try and
access by, say, nfs.
(2) ksmbd doesn't check the value it is given in set_end_of_file_info()
and then calls vfs_truncate() directly - which also bypasses the
check.
In both cases, it is potentially possible for a network filesystem to
cause a disk filesystem to be corrupted: cachefiles in the client's
cache filesystem; ksmbd in the server's filesystem.
nfsd is okay as it checks the value, but we can then remove this check
too.
Fix this by adding a check to inode_newsize_ok(), as called from
setattr_prepare(), thereby catching the issue as filesystems set up to
perform the truncate with minimal opportunity for bypassing the new
check.
Fixes: 1f08c925e7a3 ("cachefiles: Implement backing file wrangling")
Fixes: f44158485826 ("cifsd: add file operations")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@kernel.org
Acked-by: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Steve French <sfrench@samba.org>
cc: Hyunchul Lee <hyc.lee@gmail.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge additional changes in the thermal core and thermal tools updates
for 5.20-rc1:
- Fix NULL poiter dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Fix possible path truncations in the tmon utility (Florian Fainelli).
* thermal-core:
thermal: Drop obsolete dependency on COMPILE_TEST
thermal: sysfs: Fix cooling_device_stats_setup() error code path
* thermal-tools:
tools/thermal: Fix possible path truncations
|
|
Merge ARM cpufreq updates for 5.20-rc1.
* pm-cpufreq:
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
|
|
Merge operating performance points (OPP) updates for 5.20-rc1.
* pm-opp: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"This removes the need for representing the Qualcomm SFPB mutex using
an intermediate syscon node and it clean up the pm_runtime_get_sync()
usage in the OMAP hwspinlock driver"
* tag 'hwlock-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: qcom: Add support for mmio usage to sfpb-mutex
hwspinlock: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mtk:
- use rx_callback instead of cmdq_task_cb
- qcom:
- add syscon const
- add SM6375 compatible
- imx:
- enable RST channel
- clear pending irqs
* tag 'mailbox-v5.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: imx: clear pending interrupts
dt-bindings: mailbox: qcom-ipcc: Add SM6375 compatible
mailbox: imx: support RST channel
dt-bindings: mailbox: imx-mu: add RST channel
dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries
mailbox: mtk-cmdq: Remove proprietary cmdq_task_cb
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
"A few miscellaneous patches. There is no large patch series for this
merge window"
* tag 'hyperv-next-signed-20220807' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Create debugfs file with hyper-v balloon usage information
drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size
PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu()
Drivers: hv: vm_bus: Handle vmbus rescind calls after vmbus is suspended
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle semantic patch updates from Julia Lawall:
- Update the semantic patches in the kernel that contain a URL for
Coccinelle with a URL that is currently valid (from myself).
- Add a semantic patch checking for unnecessary NULL tests on dev_{put,
hold} functions (from Ziyang Xuan, followed bt a modification from
myself).
- Drop a semantic patch that replaces 0/1 by booleans, as this change
was considered to be not worthwhile by some maintainers (from Steve
Rostedt).
- Extend an existing semantic patch with more checks for useless tests
on variables addresses (from Jérémy Lefaure).
* tag 'coccinelle-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
update Coccinelle URL
coccinelle: free: add version constraint
scripts/coccinelle/free: add NULL test before dev_{put, hold} functions
coccinelle: Remove script that checks replacing 0/1 with false/true in functions returning bool
coccinelle: Extend address test from ifaddr semantic patch to test expressions
|
|
This patch removes the trailing white space in kernel/sysysctl.c
Signed-off-by: Fanjun Kong <bh1scw@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
[mcgrof: fix commit message subject]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This patch fixes two coding style issues:
1. Clean up indentation, replace spaces with tab
2. Add space after ','
Signed-off-by: Fanjun Kong <bh1scw@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
There are two adjacent sysctl entries protected by the same
CONFIG_TREE_RCU config symbol. Merge them into a single block to
improve readability.
Use the more common "#ifdef" form while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
devm_regulator_get_optional() API will return -ENODEV if the regulator was
not found. For the optional supplies CX, PX we should not fail in that case
but rather continue. So let's catch that error and continue silently if
those regulators are not found.
The commit 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with
optional px and cx regulators") was supposed to do the same but it missed
the fact that devm_regulator_get_optional() API returns -ENODEV when the
regulator was not found.
Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220801053939.12556-1-manivannan.sadhasivam@linaro.org
|
|
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
|
|
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
The various functions contain a NULL check starting in v5.15.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Mostly cleanup, including smb1 refactoring:
- multichannel perf improvement
- move additional SMB1 code to not be compiled in when legacy support
is disabled.
- bug fixes, including one important one for memory leak
- various cleanup patches
We are still working on and testing some deferred close improvements
including an important lease break fix for case when multiple deferred
closes are still open, and also some additional perf improvements -
those are not included here"
* tag '5.20-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: alloc_mid function should be marked as static
cifs: remove "cifs_" prefix from init/destroy mids functions
cifs: remove useless DeleteMidQEntry()
cifs: when insecure legacy is disabled shrink amount of SMB1 code
cifs: trivial style fixup
cifs: fix wrong unlock before return from cifs_tree_connect()
cifs: avoid use of global locks for high contention data
cifs: remove remaining build warnings
cifs: list_for_each() -> list_for_each_entry()
cifs: update MAINTAINERS file with reviewers
smb2: small refactor in smb2_check_message()
cifs: Fix memory leak when using fscache
cifs: remove minor build warning
cifs: remove some camelCase and also some static build warnings
cifs: remove unnecessary (void*) conversions.
cifs: remove unnecessary type castings
cifs: remove redundant initialization to variable mnt_sign_enabled
smb3: check xattr value length earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The two major changes in this patchset corrects VGA modes, color
handling and various other smaller fixes in the Atari framebuffer (by
Geert Uytterhoeven), and devm_* conversion, platform data fixes and
header cleanups in the imxfb driver (by Uwe Kleine-König).
Other small patches clean up code in sa1100fb, cirrusfb and omapfb,
fix a refcount leak in amba-clcd (by Liang He), and adds parameter
checks to arkfb, i740fb, vt8623fb and s3fb (by Zheyu Ma)"
* tag 'for-5.20/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (27 commits)
video: fbdev: s3fb: Check the size of screen before memset_io()
video: fbdev: arkfb: Check the size of screen before memset_io()
video: fbdev: vt8623fb: Check the size of screen before memset_io()
video: fbdev: i740fb: Check the argument of i740_calc_vclk()
video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()
video: fbdev: imxfb: fix return value check in imxfb_probe()
video: fbdev: sis: fix typos in SiS_GetModeID()
video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource
video: fbdev: imxfb: Fold <linux/platform_data/video-imxfb.h> into only user
video: fbdev: imxfb: Drop unused symbols from header
video: fbdev: imxfb: Drop platform data support
video: fbdev: amba-clcd: Fix refcount leak bugs
video: fbdev: omapfb: Unexport omap*_update_window_async()
video: fbdev: atari: Remove backward bug-compatibility
video: fbdev: atari: Remove unused definitions and variables
video: fbdev: atari: Fix VGA modes
video: fbdev: atari: Fix TT High video mode vertical refresh
video: fbdev: atari: Remove unneeded casts to void *
video: fbdev: atari: Remove unneeded casts from void *
video: fbdev: atari: Fix ext_setcolreg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- build fix for old(er) binutils
- build fix for new GCC
- kexec boot environment fix
* tag 'x86-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Build thunk_$(BITS) only if CONFIG_PREEMPTION=y
x86/numa: Use cpumask_available instead of hardcoded NULL check
x86/bus_lock: Don't assume the init value of DEBUGCTLMSR.BUS_LOCK_DETECT to be zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Various fixes: a deadline scheduler fix, a migration fix, a Sparse fix
and a comment fix"
* tag 'sched-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Do not requeue task on CPU excluded from cpus_mask
sched/rt: Fix Sparse warnings due to undefined rt.c declarations
exit: Fix typo in comment: s/sub-theads/sub-threads
sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes to kprobes and the faddr2line script, plus a cleanup"
* tag 'perf-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix ';;' typo
scripts/faddr2line: Add CONFIG_DEBUG_INFO check
scripts/faddr2line: Fix vmlinux detection on arm64
x86/kprobes: Update kcb status flag after singlestepping
kprobes: Forbid probing on trampoline and BPF code areas
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes a few prerequisite updates and fixes to the oldmem
reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities, but
also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto
test.
- Fix incorrect recovery of kretprobe modified return address in
stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as
well as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
* tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
Revert "s390/smp: enforce lowcore protection on CPU restart"
Revert "s390/smp: rework absolute lowcore access"
Revert "s390/smp,ptdump: add absolute lowcore markers"
s390/unwind: fix fgraph return address recovery
s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()
s390: add ELF note type for encrypted CPU state of a PV VCPU
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/setup: rearrange absolute lowcore initialization
s390/boot: cleanup adjust_to_uv_max() function
s390/smp: enforce lowcore protection on CPU restart
s390/tape: fix comment typo
s390/hmcdrv: fix Kconfig "its" grammar
s390/docs: fix warnings for vfio_ap driver doc
s390/docs: fix warnings for vfio_ap driver lock usage doc
s390/crash: support multi-segment iterators
s390/crash: use static swap buffer for copy_to_user_real()
s390/crash: move copy_to_user_real() to crash_dump.c
s390/zcore: fix race when reading from hardware system area
s390/crash: fix incorrect number of bytes to copy to user space
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Netgear WNR3500L v2
- removed support for VR41xx SoC and platforms based on it
- cleanups and fixes
* tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (25 commits)
MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0
Revert "MIPS: octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32"
MIPS: Introduce CAVIUM_RESERVE32 Kconfig option
MIPS: msi-octeon: eliminate kernel-doc warnings
MIPS: Fix comment typo
MIPS: BMIPS: Utilize cfe_die() for invalid DTB
MIPS: CFE: Add cfe_die()
MIPS: Fixed __debug_virt_addr_valid()
MIPS: BCM47XX: Add support for Netgear WNR3500L v2
MIPS: Remove VR41xx support
MIPS: dts: align gpio-key node names with dtschema
MIPS: dts: correct gpio-keys names and properties
MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
MIPS: Make phys_to_virt utilize __va()
MIPS: vdso: Utilize __pa() for gic_pfn
MIPS: mm: Use the bitmap API to allocate bitmaps
MIPS: math-emu: Use the bitmap API to allocate bitmaps
MIPS: Loongson64: Fix section mismatch warning
mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start
MIPS: mscc: ocelot: enable FDMA usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
|
