summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-02ovl: fix spelling mistakesWilliam Dean
fix follow spelling misktakes: decendant ==> descendant indentify ==> identify underlaying ==> underlying Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: William Dean <williamsukatube@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-08-02net/mlx5e: xsk: Discard unaligned XSK frames on striding RQMaxim Mikityanskiy
Striding RQ uses MTT page mapping, where each page corresponds to an XSK frame. MTT pages have alignment requirements, and XSK frames don't have any alignment guarantees in the unaligned mode. Frames with improper alignment must be discarded, otherwise the packet data will be written at a wrong address. Fixes: 282c0c798f8e ("net/mlx5e: Allow XSK frames smaller than a page") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20220729121356.3990867-1-maximmi@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-02EDAC/ppc_4xx: Include required of_irq header directlyChristophe Leroy
Commit 4d5c5bad5193 ("powerpc: Remove asm/prom.h from asm/mpc52xx.h and asm/pci.h") that cleans up powerpc's asm/prom.h leads to build errors in ppc4xx_edac.c due to missing header. Include required header directly to avoid the build failure. Fixes: 4d5c5bad5193 ("powerpc: Remove asm/prom.h from asm/mpc52xx.h and asm/pci.h") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/993f5a7da371458cb819b5f3f569073c78523b01.1659436180.git.christophe.leroy@csgroup.eu
2022-08-02powerpc/pci: Fix PHB numbering when using opal-phbidMichael Ellerman
The recent change to the PHB numbering logic has a logic error in the handling of "ibm,opal-phbid". When an "ibm,opal-phbid" property is present, &prop is written to and ret is set to zero. The following call to of_alias_get_id() is skipped because ret == 0. But then the if (ret >= 0) is true, and the body of that if statement sets prop = ret which throws away the value that was just read from "ibm,opal-phbid". Fix the logic by only doing the ret >= 0 check in the of_alias_get_id() case. Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias") Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220802105723.1055178-1-mpe@ellerman.id.au
2022-08-02x86/bus_lock: Don't assume the init value of DEBUGCTLMSR.BUS_LOCK_DETECT to ↵Chenyi Qiang
be zero It's possible that this kernel has been kexec'd from a kernel that enabled bus lock detection, or (hypothetically) BIOS/firmware has set DEBUGCTLMSR_BUS_LOCK_DETECT. Disable bus lock detection explicitly if not wanted. Fixes: ebb1064e7c2e ("x86/traps: Handle #DB for bus lock") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20220802033206.21333-1-chenyi.qiang@intel.com
2022-08-02x86/kprobes: Update kcb status flag after singlesteppingMasami Hiramatsu (Google)
Fix kprobes to update kcb (kprobes control block) status flag to KPROBE_HIT_SSDONE even if the kp->post_handler is not set. This bug may cause a kernel panic if another INT3 user runs right after kprobes because kprobe_int3_handler() misunderstands the INT3 is kprobe's single stepping INT3. Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Reported-by: Daniel Müller <deso@posteo.net> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Daniel Müller <deso@posteo.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20220727210136.jjgc3lpqeq42yr3m@muellerd-fedora-PC2BDTX9 Link: https://lore.kernel.org/r/165942025658.342061.12452378391879093249.stgit@devnote2
2022-08-02kprobes: Forbid probing on trampoline and BPF code areasChen Zhongjin
kernel_text_address() treats ftrace_trampoline, kprobe_insn_slot and bpf_text_address as valid kprobe addresses - which is not ideal. These text areas are removable and changeable without any notification to kprobes, and probing on them can trigger unexpected behavior: https://lkml.org/lkml/2022/7/26/1148 Considering that jump_label and static_call text are already forbiden to probe, kernel_text_address() should be replaced with core_kernel_text() and is_module_text_address() to check other text areas which are unsafe to kprobe. [ mingo: Rewrote the changelog. ] Fixes: 5b485629ba0d ("kprobes, extable: Identify kprobes trampolines as kernel text area") Fixes: 74451e66d516 ("bpf: make jited programs visible in traces") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20220801033719.228248-1-chenzhongjin@huawei.com
2022-08-02net: usb: ax88179_178a: Bind only to vendor-specific interfaceHector Martin
The Anker PowerExpand USB-C to Gigabit Ethernet adapter uses this chipset, but exposes CDC Ethernet configurations as well as the vendor specific one. This driver tries to bind by PID:VID unconditionally and ends up picking up the CDC configuration, which is supposed to be handled by the class driver. To make things even more confusing, it sees both of the CDC class interfaces and tries to bind twice, resulting in two broken Ethernet devices. Change all the ID matches to specifically match the vendor-specific interface. By default the device comes up in CDC mode and is bound by that driver (which works fine); users may switch it to the vendor interface using sysfs to set bConfigurationValue, at which point the device actually goes through a reconnect cycle and comes back as a vendor specific only device, and then this driver binds and works too. The affected device uses VID/PID 0b95:1790, but we might as well change all of them for good measure, since there is no good reason for this driver to bind to standard CDC Ethernet interfaces. v3: Added VID/PID info to commit message Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220731072209.45504-1-marcan@marcan.st Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-02Input: gscps2 - check return value of ioremap() in gscps2_probe()Xie Shaowen
The function ioremap() in gscps2_probe() can fail, so its return value should be checked. Fixes: 4bdc0d676a643 ("remove ioremap_nocache and devm_ioremap_nocache") Cc: <stable@vger.kernel.org> # v5.6+ Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: Xie Shaowen <studentxswpy@163.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-08-02selftests: net: fix IOAM test skip return codeKleber Sacilotto de Souza
The ioam6.sh test script exits with an error code (1) when tests are skipped due to lack of support from userspace/kernel or not enough permissions. It should return the kselftests SKIP code instead. Reviewed-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Link: https://lore.kernel.org/r/20220801124615.256416-1-kleber.souza@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-02net: usb: make USB_RTL8153_ECM non user configurableMaciej Żenczykowski
This refixes: commit 7da17624e7948d5d9660b910f8079d26d26ce453 nt: usb: USB_RTL8153_ECM should not default to y In general, device drivers should not be enabled by default. which basically broke the commit it claimed to fix, ie: commit 657bc1d10bfc23ac06d5d687ce45826c760744f9 r8153_ecm: avoid to be prior to r8152 driver Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled as modules. Otherwise, the r8153_ecm would be used, even though the device is supported by r8152 driver. this commit amounted to: drivers/net/usb/Kconfig: +config USB_RTL8153_ECM + tristate "RTL8153 ECM support" + depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n) + default y + help + This option supports ECM mode for RTL8153 ethernet adapter, when + CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not + supported by r8152 driver. drivers/net/usb/Makefile: -obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o +obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_RTL8153_ECM) += r8153_ecm.o And as can be seen it pulls a piece of the cdc_ether driver out into a separate config option to be able to make this piece modular in case cdc_ether is builtin, while r8152 is modular. While in general, device drivers should indeed not be enabled by default: this isn't a device driver per say, but rather this is support code for the CDCETHER (ECM) driver, and should thus be enabled if it is enabled. See also email thread at: https://www.spinics.net/lists/netdev/msg767649.html In: https://www.spinics.net/lists/netdev/msg768284.html Jakub wrote: And when we say "removed" we can just hide it from what's prompted to the user (whatever such internal options are called)? I believe this way we don't bring back Marek's complaint. Side note: these incorrect defaults will result in Android 13 on 5.15 GKI kernels lacking USB_RTL8153_ECM support while having USB_NET_CDCETHER (luckily we also have USB_RTL8150 and USB_RTL8152, so it's probably only an issue for very new RTL815x hardware with no native 5.15 driver). Fixes: 7da17624e7948d5d ("nt: usb: USB_RTL8153_ECM should not default to y") Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hayes Wang <hayeswang@realtek.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220730230113.4138858-1-zenczykowski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-02venus: pm_helpers: Fix warning in OPP during probeStanimir Varbanov
Fix the following WARN triggered during Venus driver probe on 5.19.0-rc8-next-20220728: WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+) videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_bus qcom_stats drm_display_helper qcom_pil_info soundwire_bus snd_soc_lpass_va_macro mc qcom_q6v5 phy_qcom_snps_femto_v2 qcom_rng snd_soc_lpass_macro_common snd_soc_lpass_wsa_macro lpass_gfm_sm8250 slimbus qcom_sysmon qcom_common qcom_glink_smem qmi_helpers qcom_wdt mdt_loader socinfo icc_osm_l3 display_connector drm_kms_helper qnoc_sm8250 drm fuse ip_tables x_tables ipv6 CPU: 7 PID: 339 Comm: systemd-udevd Not tainted 5.19.0-rc8-next-20220728 #4 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dev_pm_opp_set_config+0x49c/0x610 lr : dev_pm_opp_set_config+0x58/0x610 sp : ffff8000093c3710 x29: ffff8000093c3710 x28: ffffbca3959d82b8 x27: ffff8000093c3d00 x26: ffffbca3959d8e08 x25: ffff4396cac98118 x24: ffff4396c0e24810 x23: ffff4396c4272c40 x22: ffff4396c0e24810 x21: ffff8000093c3810 x20: ffff4396cac36800 x19: ffff4396cac96800 x18: 0000000000000000 x17: 0000000000000003 x16: ffffbca3f4edf198 x15: 0000001cba64a858 x14: 0000000000000180 x13: 000000000000017e x12: 0000000000000000 x11: 0000000000000002 x10: 0000000000000a60 x9 : ffff8000093c35c0 x8 : ffff4396c4273700 x7 : ffff43983efca6c0 x6 : ffff43983efca640 x5 : 00000000410fd0d0 x4 : ffff4396c4272c40 x3 : ffffbca3f5d1e008 x2 : 0000000000000000 x1 : ffff4396c2421600 x0 : ffff4396cac96860 Call trace: dev_pm_opp_set_config+0x49c/0x610 devm_pm_opp_set_config+0x18/0x70 vcodec_domains_get+0xb8/0x1638 [venus_core] core_get_v4+0x1d8/0x218 [venus_core] venus_probe+0xf4/0x468 [venus_core] platform_probe+0x68/0xd8 really_probe+0xbc/0x2a8 __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0xf0 __driver_attach+0x70/0x120 bus_for_each_dev+0x70/0xc0 driver_attach+0x24/0x30 bus_add_driver+0x150/0x200 driver_register+0x64/0x120 __platform_driver_register+0x28/0x38 qcom_venus_driver_init+0x24/0x1000 [venus_core] do_one_initcall+0x54/0x1c8 do_init_module+0x44/0x1d0 load_module+0x16c8/0x1aa0 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x44/0x108 el0_svc_common.constprop.0+0xcc/0xf0 do_el0_svc+0x2c/0xb8 el0_svc+0x2c/0x88 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x18c/0x190 qcom-venus: probe of aa00000.video-codec failed with error -16 The fix is re-ordering the code related to OPP core. The OPP core expects all configuration options to be provided before the OPP table is added. Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-08-01net: marvell: prestera: remove reduntant codeSebin Sebastian
Fixes the coverity warning 'EVALUATION_ORDER' violation. port is written twice with the same value. Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com> Link: https://lore.kernel.org/r/20220801040731.34741-1-mailmesebin00@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01octeontx2-pf: Reduce minimum mtu size to 60Subbaraya Sundeep
PTP messages like SYNC, FOLLOW_UP, DELAY_REQ are of size 58 bytes. Using a minimum packet length as 64 makes NIX to pad 6 bytes of zeroes while transmission. This is causing latest ptp4l application to emit errors since length in PTP header and received packet are not same. Padding upto 3 bytes is fine but more than that makes ptp4l to assume the pad bytes as a TLV. Hence reduce the size to 60 from 64. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20220729092457.3850-1-naveenm@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01Merge tag 'qcom-clk-for-5.20' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom Pull Qualcomm clk driver updates from Bjorn Andersson: - Introduces support for the camera clock controller in SM8450 and the display and gpu clock controllers in SM8350. - Various fixes, new clocks and USB GDSCs are introduced for IPQ8074 and for MSM8939 a series of fixes for issues introduced by inheriting the MSM8916 GCC driver is introduced. - Support for a new type of voteable GDSCs are introduced and put in use for the SC8280XP PCIe GDSCs. SC8280XP pipe clocks transitioned to the new phy-mux implementation. - MSM8996 GCC, the RPM clock driver and some clocks in MSM8994 GCC are transitioned to use parent_data. - The topology for Titan (camera) GDSCs on SDM845 and SM8250 are corrected and MSM8916 gains more possible frequencies for its GP clocks. - The GCC and tsens handling on MSM8960 is reworked to mimic the design in IPQ8074 and allow the GCC driver to probe earlier. - The regulator based mmcx supply for dispcc and videocc is dropped, as the only upstream target that adapted this interface was transitioned several kernel versions ago. - GDSCs found to be enabled at boot will now reflect in the enable count of the supply, as was done with the regulator supplies previously. * tag 'qcom-clk-for-5.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits) clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC clk: qcom: add support for SM8350 GPUCC clk: qcom: add camera clock controller driver for SM8450 SoC clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfaces clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed code clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description ...
2022-08-01dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI propertiesRob Herring
Allow 'iommu-map', 'iommu-map-mask', and 'msi-parent' properties for generic host. This fixes unevaluated property warnings on Arm Juno, AMD Seattle, and FSL LS1028a. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220728175137.1172841-1-robh@kernel.org
2022-08-01PCI: imx6: Support more than Gen2 speed link modeRichard Zhu
Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up to Gen3 link speed. Link: https://lore.kernel.org/r/1658287576-26908-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registersRichard Zhu
The PCIE_DBI_RO_WR_EN bit should be set when write some DBI registers. To make sure that the DBI registers are writable, set the PCIE_DBI_RO_WR_EN properly when writing the DBI registers. Link: https://lore.kernel.org/r/1652866528-13220-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Reformat suspend callback to keep symmetric with resumeRichard Zhu
Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions. Encapsulate clocks, regulators disables and PHY uninitialization into imx6_pcie_host_exit(). To keep suspend/resume symmetric as much as possible, invoke these two new created functions in suspend callback. To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable() to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset(). Link: https://lore.kernel.org/r/1657783869-19194-18-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move the imx6_pcie_ltssm_disable() earlierRichard Zhu
Move the imx6_pcie_ltssm_disable() earlier and place it just behind the imx6_pcie_ltssm_enable(), since it might not be only used by suspend callback directly. To be symmetric with imx6_pcie_ltssm_enable(), add the IMX6Q and IMX8MQ switch cases in imx6_pcie_ltssm_disable(). Link: https://lore.kernel.org/r/1657783869-19194-17-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Disable clocks in reverse order of enableBjorn Helgaas
imx6_pcie_clk_enable() enables clocks in the order: pcie_phy pcie_bus pcie imx6_pcie_enable_ref_clk Change imx6_pcie_clk_disable() to disable them in the reverse order. Link: https://lore.kernel.org/r/1657783869-19194-16-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Do not hide PHY driver callbacks and refine the error handlingRichard Zhu
Move the phy_power_on() to host_init from imx6_pcie_clk_enable(). Move the phy_init() to host_init from imx6_pcie_deassert_core_reset(). Refine the error handling in imx6_pcie_host_init() accordingly. Link: https://lore.kernel.org/r/1657783869-19194-15-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Reduce resume time by only starting link if it was up before suspendRichard Zhu
i.MX PCIe doesn't support hotplug. During resume, only start PCIe link training when the link was up before system suspend to avoid the long latency in the link training period. Link: https://lore.kernel.org/r/1657783869-19194-14-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Mark the link down as non-fatal errorRichard Zhu
If the PCIe link is down, return zero from imx6_pcie_start_link() so the driver will probe successfully. Link: https://lore.kernel.org/r/1657783869-19194-13-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()Richard Zhu
Move regulator enable out of imx6_pcie_deassert_core_reset(), since the regulator_enable() has nothing to do with imx6_pcie_deassert_core_reset(). Link: https://lore.kernel.org/r/1657783869-19194-12-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Turn off regulator when system is in suspend modeRichard Zhu
The driver should undo any enables it did itself. The regulator disable shouldn't be basing decisions on regulator_is_enabled(). Move the regulator_disable to the suspend function, turn off regulator when the system is in suspend mode. Link: https://lore.kernel.org/r/1657783869-19194-11-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Call host init function directly in resumeRichard Zhu
Call imx6_pcie_host_init() instead of duplicating codes in resume. Note that this also means we do MPLL setup again during resume, which we didn't do before. [bhelgaas: add MPLL setup note, pointed out by Lucas] Link: https://lore.kernel.org/r/1657783869-19194-10-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Disable i.MX6QDL clock when disabling ref clocksRichard Zhu
When disabling PCIe clocks, disable i.MX6QDL ref clock too. Link: https://lore.kernel.org/r/1657783869-19194-9-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Propagate .host_init() errors to callerRichard Zhu
Since dw_pcie_host_init() checks for errors from ops->host_init(), check for errors when enabling power regulators and clocks and return them. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1657783869-19194-8-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()Richard Zhu
Encapsulate the i.MX PCIe clock enable operations into one standalone function, imx6_pcie_clk_enable(). No functional change intended. [bhelgaas: split pure code moves into separate patches] Link: https://lore.kernel.org/r/1657783869-19194-7-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Factor out ref clock disable to match enableBjorn Helgaas
The PCIe ref clocks are specific to different variants. The enables are already split out into imx6_pcie_enable_ref_clk(), but the disables were combined with the more generic bus/phy/pcie clock disables in imx6_pcie_clk_disable(). Split out the variant-specific disables into imx6_pcie_disable_ref_clk() to match imx6_pcie_enable_ref_clk(). No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-6-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move imx6_pcie_clk_disable() earlierRichard Zhu
Move imx6_pcie_clk_disable() earlier to be near other clock-related functions. No functional change intended. [bhelgaas: reorder patch so pure moves are earlier] Link: https://lore.kernel.org/r/1657783869-19194-5-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move imx6_pcie_enable_ref_clk() earlierBjorn Helgaas
Move imx6_pcie_enable_ref_clk() earlier so it's not in the middle between imx6_pcie_assert_core_reset() and imx6_pcie_deassert_core_reset(). No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-4-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move PHY management functions togetherBjorn Helgaas
Collect imx6_pcie_init_phy(), imx7d_pcie_wait_for_phy_pll_lock(), and imx6_setup_phy_mpll() earlier with other PHY-related code. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-3-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlierBjorn Helgaas
Move imx6_pcie_grp_offset() and imx6_pcie_configure_type() earlier in the file since they depend on nothing and are used by several other functions that will be moved earlier. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()Bjorn Helgaas
Replace SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() with NOIRQ_SYSTEM_SLEEP_PM_OPS(), which has the advantage that the compiler always sees the PM callbacks as referenced, so they don't need to be wrapped with "#ifdef CONFIG_PM_SLEEP" or tagged with "__maybe_unused" to avoid "defined but not used" warnings. See 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old ones"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2022-08-01PCI: exynos: Correct generic PHY usageMarek Szyprowski
The proper initialization for generic PHYs is to call first phy_init(), then phy_power_on(). While touching this, remove the phy_reset() call. It is just a left-over from the obsoleted Exynos5440 support and the current exynos-pcie PHY driver doesn't even support this function. It is also rarely used by other drivers. Link: https://lore.kernel.org/r/20220628220409.26545-2-m.szyprowski@samsung.com Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-08-01phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacksMarek Szyprowski
The exynos-pcie driver called phy_power_on() before phy_init() for some historical reasons. However the generic PHY framework assumes that the proper sequence is to call phy_init() first, then phy_power_on(). The operations done by both functions should be considered as one action and as such they are called by the exynos-pcie driver (without doing anything between them). The initialization is just a sequence of register writes, which cannot be altered without breaking the hardware operation. To match the generic PHY framework requirement, simply move all register writes to the phy_init()/phy_exit() and drop power_on()/power_off() callbacks. This way the driver will also work with the old (incorrect) PHY initialization call sequence. Link: https://lore.kernel.org/r/20220628220409.26545-1-m.szyprowski@samsung.com Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
2022-08-01dt-bindings: PCI: qcom: Support additional MSI vectorsDmitry Baryshkov
On Qualcomm platforms each group of 32 MSI vectors is routed to the separate GIC interrupt. Document mapping of additional interrupts. Link: https://lore.kernel.org/r/20220707134733.2436629-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-01PCI: dwc: Handle MSIs routed to multiple GIC interruptsDmitry Baryshkov
On some Qualcomm platforms each group of 32 MSI vectors is routed to a separate GIC interrupt. Implement support for such configurations by parsing "msi0" ... "msiX" interrupts and attaching them to the chained handler. Note that if DT doesn't list an array of MSI interrupts and uses a single "msi" IRQ, the driver will limit the number of supported MSI vectors to 32. Link: https://lore.kernel.org/r/20220707134733.2436629-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Convert struct pcie_port.msi_irq to an arrayDmitry Baryshkov
The Qualcomm DWC PCIe controller supports more than 32 MSI interrupts, but they are routed to separate interrupts in groups of 32 vectors. To support this configuration, change the msi_irq field to an array. Let the DWC core handle all interrupts that were set in this array. [bhelgaas: reorder, drop "irq" temporary to make patch cleaner] Link: https://lore.kernel.org/r/20220707134733.2436629-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Split MSI IRQ parsing/allocation to a separate functionDmitry Baryshkov
Split handling of MSI host IRQs to a separate dw_pcie_msi_host_init() function. The code is complex enough to warrant a separate function. [bhelgaas: reorder patch earlier] Link: https://lore.kernel.org/r/20220707134733.2436629-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()Dmitry Baryshkov
The dwc-based drivers set pp->msi_irq to -ENODEV if they do not want the dwc core to do anything with pp->msi_irq. dw_pcie_host_init() sets the handler and data when "pp->msi_irq > 0", so use the same condition when removing the handler and data in dw_pcie_free_msi(). Link: https://lore.kernel.org/r/20220707134733.2436629-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Use the bitmap API to allocate bitmapsChristophe JAILLET
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Link: https://lore.kernel.org/r/bc6586a603abc0db7d4531308b698fbe7a6d7083.1657375829.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: dwc: Fix MSI msi_msg DMA mappingWill McVicker
As of 07940c369a6b ("PCI: dwc: Fix MSI page leakage in suspend/resume"), the PCIe designware host driver has been using the driver data allocation for the msi_msg DMA mapping which can result in a DMA_MAPPING_ERROR due to the DMA overflow check in dma_direct_map_page() when the address is greater than 32 bits (reported in [1]). The commit was trying to address a memory leak on suspend/resume by moving the MSI mapping to dw_pcie_host_init(), but subsequently dropped the page allocation thinking it wasn't needed. To fix the DMA mapping issue as well as make msi_msg DMA'able, switch back to allocating a 32-bit page for the msi_msg. To avoid the suspend/resume leak, allocate the page in dw_pcie_host_init() since that shouldn't be called during suspend/resume. [1] https://lore.kernel.org/all/Yo0soniFborDl7+C@google.com/ Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-08-01PCI: dwc: Check iATU in/outbound range setup statusSerge Semin
Make the DWC PCIe RC/EP safer and more verbose for invalid or failed inbound and outbound iATU window setups. Silently ignoring iATU regions setup errors may cause unpredictable errors. For instance if a cfg or IO window fails to be activated, then any CFG/IO requested won't reach target PCIe devices and the corresponding accessors will return platform-specific random values. [bhelgaas: trim commit log] Link: https://lore.kernel.org/r/20220624143947.8991-15-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Validate iATU outbound mappings against hardware constraintsSerge Semin
Make __dw_pcie_prog_outbound_atu() check the requested region base and size against what the hardware can support. Return error if the region is not correctly aligned or of a supported size. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-14-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Add iATU regions size detection procedureSerge Semin
The DWC PCIe RC/EP/DM IP core configuration parameters determine the number of inbound and outbound iATU windows, alignment requirements (which is also the minimum window size), minimum and maximum sizes. If internal ATU is enabled, the former settings are determined by CX_ATU_MIN_REGION_SIZE; the latter are determined by CX_ATU_MAX_REGION_SIZE. Determine the required alignment and maximum size supported by the controller and log it to help verify whether the requested inbound or outbound memory mappings can be fully created. Note 1. The extended iATU regions have been supported since DWC PCIe v4.60a. There is no need in testing the upper limit register availability for the older cores. Note 2. The regions alignment is determined with using the fls() method since the lower four bits of the ATU Limit register can be occupied with the Circular Buffer Increment setting, which can be initialized with zeros. Link: https://lore.kernel.org/r/20220624143947.8991-13-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Simplify in/outbound iATU setup methodsSerge Semin
Previously __dw_pcie_prog_outbound_atu() duplicated a lot of code between the iatu_unroll_enabled version and the PCIE_ATU_VIEWPORT version: __dw_pcie_prog_outbound_atu if (iatu_unroll_enabled) dw_pcie_prog_outbound_atu_unroll dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_LOWER_BASE, ...) dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_UPPER_BASE, ...) ... return dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) dw_pcie_writel_dbi(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_dbi(PCIE_ATU_UPPER_BASE, ...) ... Unify those by pushing the unroll address computation and viewport selection down into dw_pcie_writel_atu() so we can use the same dw_pcie_writel_atu_ob() accessor for both paths: __dw_pcie_prog_outbound_atu dw_pcie_writel_atu_ob(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_atu dw_pcie_select_atu # new if (iatu_unroll_enabled) return pci->atu_base + PCIE_ATU_UNROLL_BASE(...) dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) return pci->atu_base dw_pcie_write(base + reg) dw_pcie_writel_atu_ob(PCIE_ATU_UPPER_BASE, ...) ... In the non-unroll case, this does involve more MMIO writes to PCIE_ATU_VIEWPORT, but it's mainly in initialization paths and the code simplification is significant. [bhelgaas: commit log, simplify dw_pcie_select_atu()] Link: https://lore.kernel.org/r/20220624143947.8991-12-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OBSerge Semin
Previously callers of dw_pcie_disable_atu() supplied enum dw_pcie_region_type (DW_PCIE_REGION_INBOUND, DW_PCIE_REGION_OUTBOUND), which dw_pcie_disable_atu() converted to the PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB values needed to program the ATU registers. Simplify the code by dropping the dw_pcie_region_type enum and passing PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB directly. Reorder dw_pcie_disable_atu() arguments to (dir, index) since "index" indicates an ATU window in the regions of the corresponding direction. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-29 08:07:02 +0000