| Age | Commit message (Collapse) | Author |
|---|
|
In the SDMA s0ix save process requires to turn off SDMA ring buffer for
avoiding the SDMA in-flight request, otherwise will suffer from SDMA page
fault which causes by page request from in-flight SDMA ring accessing at
SDMA restore phase.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2248
Cc: stable@vger.kernel.org # 6.0,5.15+
Fixes: f8f4e2a51834 ("drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull NVMe fix from Christoph:
"nvme fixes for Linux 6.1
- initialize core quirks before calling nvme_init_subsystem
(Pankaj Raghav)"
* tag 'nvme-6.1-2022-12-07' of git://git.infradead.org/nvme:
nvme initialize core quirks before calling nvme_init_subsystem
|
|
The ethernet-controller dt-schema, mostly pushed forward by Linux, has
the "internal" PHY mode for denoting MAC connections to an internal PHY.
U-Boot may provide device tree blobs where this phy-mode is specified,
so make the Linux driver accept them.
It appears that the current behavior with phy-mode = "internal" was
introduced when mv88e6xxx started reporting supported_interfaces to
phylink. Prior to that, I don't think it would have any issues accepting
this phy-mode.
Fixes: d4ebf12bcec4 ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Link: https://lore.kernel.org/linux-arm-kernel/20221205172709.kglithpbhdbsakvd@skbuf/T/
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx6q-gw904.dts
Link: https://lore.kernel.org/r/20221205194845.2131161-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in
the non-linear area") introduced a (valid) build warning. There have
even been reports of this problem breaking networking of Xen guests.
Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: be81992f9086 ("xen/netback: don't queue unlimited number of packages")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20221205141333.3974565-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cezanne platforms under the right circumstances have a synchronization
problem where attempting to enter s2idle may fail if the x86 cores are
put into HLT before hardware resume from the previous attempt has
completed.
To avoid this issue add a 10-20ms delay before entering s2idle another
time. This workaround will only be applied on interrupts that wake the
hardware but don't break the s2idle loop.
Cc: stable@vger.kernel.org # 6.1
Cc: "Mahapatra, Rajib" <Rajib.Mahapatra@amd.com>
Cc: "Raul Rangel" <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221116154341.13382-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a similar fixup like arm64 does, only handle translation faults
in case of unexpected kfence report when alignment faults on ARM, see
more from commit 0bb1fbffc631 ("arm64: mm: kfence: only handle translation
faults").
Fixes: 75969686ec0d ("ARM: 9166/1: Support KFENCE for ARM")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Syzkaller reports a NULL deref bug as follows:
BUG: KASAN: null-ptr-deref in io_tctx_exit_cb+0x53/0xd3
Read of size 4 at addr 0000000000000138 by task file1/1955
CPU: 1 PID: 1955 Comm: file1 Not tainted 6.1.0-rc7-00103-gef4d3ea40565 #75
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
? io_tctx_exit_cb+0x53/0xd3
kasan_report+0xbb/0x1f0
? io_tctx_exit_cb+0x53/0xd3
kasan_check_range+0x140/0x190
io_tctx_exit_cb+0x53/0xd3
task_work_run+0x164/0x250
? task_work_cancel+0x30/0x30
get_signal+0x1c3/0x2440
? lock_downgrade+0x6e0/0x6e0
? lock_downgrade+0x6e0/0x6e0
? exit_signals+0x8b0/0x8b0
? do_raw_read_unlock+0x3b/0x70
? do_raw_spin_unlock+0x50/0x230
arch_do_signal_or_restart+0x82/0x2470
? kmem_cache_free+0x260/0x4b0
? putname+0xfe/0x140
? get_sigframe_size+0x10/0x10
? do_execveat_common.isra.0+0x226/0x710
? lockdep_hardirqs_on+0x79/0x100
? putname+0xfe/0x140
? do_execveat_common.isra.0+0x238/0x710
exit_to_user_mode_prepare+0x15f/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0023:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 002b:00000000fffb7790 EFLAGS: 00000200 ORIG_RAX: 000000000000000b
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Kernel panic - not syncing: panic_on_warn set ...
This happens because the adding of task_work from io_ring_exit_work()
isn't synchronized with canceling all work items from eg exec. The
execution of the two are ordered in that they are both run by the task
itself, but if io_tctx_exit_cb() is queued while we're canceling all
work items off exec AND gets executed when the task exits to userspace
rather than in the main loop in io_uring_cancel_generic(), then we can
find current->io_uring == NULL and hit the above crash.
It's safe to add this NULL check here, because the execution of the two
paths are done by the task itself.
Cc: stable@vger.kernel.org
Fixes: d56d938b4bef ("io_uring: do ctx initiated file note removal")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221206093833.3812138-1-harshit.m.mogalapalli@oracle.com
[axboe: add code comment and also put an explanation in the commit msg]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-12-05
An update from ieee802154 for your *net* tree:
Three small fixes this time around.
Ziyang Xuan fixed an error code for a timeout during initialization of the
cc2520 driver.
Hauke Mehrtens fixed a crash in the ca8210 driver SPI communication due
uninitialized SPI structures.
Wei Yongjun added INIT_LIST_HEAD ieee802154_if_add() to avoid a potential
null pointer dereference.
====================
Link: https://lore.kernel.org/r/20221205122515.1720539-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dpaa2_switch_acl_entry_remove()
The cmd_buff needs to be freed when error happened in
dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove().
Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221205061515.115012-1-yuancan@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The greth_init_rings() function won't free the newly allocated skb when
dma_mapping_error() returns error, so add dev_kfree_skb() to fix it.
Compile tested only.
Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1670134149-29516-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When sending packets between nodes in netns, it calls tipc_lxc_xmit() for
peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv()
might be called, and it's pretty much like in tipc_rcv().
Currently the local 'node rw lock' is held during calling tipc_lxc_xmit()
to protect the peer_net not being freed by another thread. However, when
receiving these packets, tipc_node_add_conn() might be called where the
peer 'node rw lock' is acquired. Then a dead lock warning is triggered by
lockdep detector, although it is not a real dead lock:
WARNING: possible recursive locking detected
--------------------------------------------
conn_server/1086 is trying to acquire lock:
ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
but task is already holding lock:
ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_xmit+0x285/0xb30 [tipc]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&n->lock#2);
lock(&n->lock#2);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by conn_server/1086:
#0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \
at: tipc_accept+0x9c0/0x10b0 [tipc]
#1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \
at: tipc_accept+0x363/0x10b0 [tipc]
#2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_xmit+0x285/0xb30 [tipc]
#3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \
at: tipc_sk_rcv+0x2da/0x1b40 [tipc]
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
__lock_acquire.cold.77+0x1f2/0x3d7
lock_acquire+0x1d2/0x610
_raw_write_lock_bh+0x38/0x80
tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
tipc_sk_finish_conn+0x21e/0x640 [tipc]
tipc_sk_filter_rcv+0x147b/0x3030 [tipc]
tipc_sk_rcv+0xbb4/0x1b40 [tipc]
tipc_lxc_xmit+0x225/0x26b [tipc]
tipc_node_xmit.cold.82+0x4a/0x102 [tipc]
__tipc_sendstream+0x879/0xff0 [tipc]
tipc_accept+0x966/0x10b0 [tipc]
do_accept+0x37d/0x590
This patch avoids this warning by not holding the 'node rw lock' before
calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock()
should be enough, as in cleanup_net() when freeing the netns, it calls
synchronize_rcu() before the free is continued.
Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes
sense to call it under rcu_read_lock(). Note that the right lock order
must be:
rcu_read_lock();
tipc_node_read_lock(n);
tipc_node_read_unlock(n);
tipc_lxc_xmit();
rcu_read_unlock();
instead of:
tipc_node_read_lock(n);
rcu_read_lock();
tipc_node_read_unlock(n);
tipc_lxc_xmit();
rcu_read_unlock();
and we have to call tipc_node_read_lock/unlock() twice in
tipc_node_xmit().
Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We don't get any further EVENT from an esd CAN USB device for changes
on REC or TEC while those counters converge to 0 (with ecc == 0). So
when handling the "Back to Error Active"-event force txerr = rxerr =
0, otherwise the berr-counters might stay on values like 95 forever.
Also, to make life easier during the ongoing development a
netdev_dbg() has been introduced to allow dumping error events send by
an esd CAN USB device.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Additionally, remove it from .ndo_stop().
This ensures that the worker is not called after being freed, and that
the UART TX queue remains active to send final commands when the
netdev is stopped.
Thanks to Jiri Slaby for finding this in slcan:
https://lore.kernel.org/linux-can/20221201073426.17328-1-jirislaby@kernel.org/
A variant of this patch for slcan, with the flush in .ndo_stop() still
present, has been tested successfully on physical hardware:
https://bugzilla.suse.com/show_bug.cgi?id=1205597
Fixes: 43da2f07622f ("can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters")
Cc: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20221202160148.282564-1-max@enpas.org
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The LTP test pty03 is causing a crash in slcan:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
Workqueue: 0x0 (events)
RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185)
Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e
RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968
RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0
RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734
R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000
R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0
FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0
Call Trace:
<TASK>
worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436)
kthread (/home/rich/kernel/linux/kernel/kthread.c:376)
ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312)
Apparently, the slcan's tx_work is freed while being scheduled. While
slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work),
slcan_close() (tty side) does not. So when the netdev is never set UP,
but the tty is stuffed with bytes and forced to wakeup write, the work
is scheduled, but never flushed.
So add an additional flush_work() to slcan_close() to be sure the work
is flushed under all circumstances.
The Fixes commit below moved flush_work() from slcan_close() to
slcan_netdev_close(). What was the rationale behind it? Maybe we can
drop the one in slcan_netdev_close()?
I see the same pattern in can327. So it perhaps needs the very same fix.
Fixes: cfcb4465e992 ("can: slcan: remove legacy infrastructure")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205597
Reported-by: Richard Palethorpe <richard.palethorpe@suse.com>
Tested-by: Petr Vorel <petr.vorel@suse.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20221201073426.17328-1-jirislaby@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Analogue to commit 8aa59e355949 ("can: af_can: fix NULL pointer
dereference in can_rx_register()") we need to check for a missing
initialization of ml_priv in the receive path of CAN frames.
Since commit 4e096a18867a ("net: introduce CAN specific pointer in the
struct net_device") the check for dev->type to be ARPHRD_CAN is not
sufficient anymore since bonding or tun netdevices claim to be CAN
devices but do not initialize ml_priv accordingly.
Fixes: 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device")
Reported-by: syzbot+2d7f58292cb5b29eb5ad@syzkaller.appspotmail.com
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20221206201259.3028-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-12-05 (i40e)
Michal clears XPS init flag on reset to allow for updated values to be
written.
Sylwester adds sleep to VF reset to resolve issue of VFs not getting
resources.
Przemyslaw rejects filters for raw IPv4 or IPv6 l4_4_bytes filters as they
are not supported.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Disallow ip4 and ip6 l4_4_bytes
i40e: Fix for VF MAC address 0
i40e: Fix not setting default xps_cpus after reset
====================
Link: https://lore.kernel.org/r/20221205212523.3197565-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(),
priv->regions is not released.
Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205012132.2110979-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
ipv4: Two small fixes for bugs in IPv4 routing code.
A variation of the second bug was reported by an FRR 5.0 (released
06/18) user as this version was setting a table ID of 0 for the
default VRF, unlike iproute2 and newer FRR versions.
The first bug was discovered while fixing the second.
Both bugs are not regressions (never worked) and are not critical
in my opinion, so the fixes can be applied to net-next, if desired.
No regressions in other tests:
# ./fib_tests.sh
...
Tests passed: 191
Tests failed: 0
====================
Link: https://lore.kernel.org/r/20221204075045.3780097-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.
Consider the following example:
# ip address add dev dummy1 192.0.2.1/28
# ip address add dev dummy1 192.0.2.17/28
# ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
# ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:
# ip address del dev dummy1 192.0.2.17/28
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.
Add a test case that fails before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [FAIL]
Tests passed: 8
Tests failed: 1
And passes after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [ OK ]
Tests passed: 9
Tests failed: 0
Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.
Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().
Add test cases that fail before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [FAIL]
TEST: Route in default VRF not removed [ OK ]
RTNETLINK answers: File exists
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [FAIL]
Tests passed: 6
Tests failed: 2
And pass after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Tests passed: 8
Tests failed: 0
Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prior to the Fixes: commit, the initialization code went through the
same fec_enet_set_coalesce() function as used by ethtool, and that
function correctly checks whether the current variant has support for
irq coalescing.
Now that the initialization code instead calls fec_enet_itr_coal_set()
directly, that call needs to be guarded by a check for the
FEC_QUIRK_HAS_COALESCE bit.
Fixes: df727d4547de (net: fec: don't reset irq coalesce settings to defaults on "ip link up")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving
IPv6 messages"), there is a copy/paste issue for NA daddr. I found that
in my testing and fixed it in my local branch. But I forgot to re-format
the patch and sent the wrong mail.
Fix it by reading the correct dest address.
Fixes: 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20221206032055.7517-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When booting a arm 32-bit kernel with config CONFIG_AHCI_DWC enabled on
a am57xx-evm board. This happens when the clock references are unnamed
in DT, the strcmp() produces a NULL pointer dereference, see the
following oops, NULL pointer dereference:
[ 4.673950] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 4.682098] [00000000] *pgd=00000000
[ 4.685699] Internal error: Oops: 5 [#1] SMP ARM
[ 4.690338] Modules linked in:
[ 4.693420] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc7 #1
[ 4.699615] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 4.705749] PC is at strcmp+0x0/0x34
[ 4.709350] LR is at ahci_platform_find_clk+0x3c/0x5c
[ 4.714416] pc : [<c130c494>] lr : [<c0c230e0>] psr: 20000013
[ 4.720703] sp : f000dda8 ip : 00000001 fp : c29b1840
[ 4.725952] r10: 00000020 r9 : c1b23380 r8 : c1b23368
[ 4.731201] r7 : c1ab4cc4 r6 : 00000001 r5 : c3c66040 r4 : 00000000
[ 4.737762] r3 : 00000080 r2 : 00000080 r1 : c1ab4cc4 r0 : 00000000
[...]
[ 4.998870] strcmp from ahci_platform_find_clk+0x3c/0x5c
[ 5.004302] ahci_platform_find_clk from ahci_dwc_probe+0x1f0/0x54c
[ 5.010589] ahci_dwc_probe from platform_probe+0x64/0xc0
[ 5.016021] platform_probe from really_probe+0xe8/0x41c
[ 5.021362] really_probe from __driver_probe_device+0xa4/0x204
[ 5.027313] __driver_probe_device from driver_probe_device+0x38/0xc8
[ 5.033782] driver_probe_device from __driver_attach+0xb4/0x1ec
[ 5.039825] __driver_attach from bus_for_each_dev+0x78/0xb8
[ 5.045532] bus_for_each_dev from bus_add_driver+0x17c/0x220
[ 5.051300] bus_add_driver from driver_register+0x90/0x124
[ 5.056915] driver_register from do_one_initcall+0x48/0x1e8
[ 5.062591] do_one_initcall from kernel_init_freeable+0x1cc/0x234
[ 5.068817] kernel_init_freeable from kernel_init+0x20/0x13c
[ 5.074584] kernel_init from ret_from_fork+0x14/0x2c
[ 5.079681] Exception stack(0xf000dfb0 to 0xf000dff8)
[ 5.084747] dfa0: 00000000 00000000 00000000 00000000
[ 5.092956] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.101165] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 5.107818] Code: e5e32001 e3520000 1afffffb e12fff1e (e4d03001)
[ 5.114013] ---[ end trace 0000000000000000 ]---
Add an extra check in the if-statement if hpriv-clks[i].id.
Fixes: 6ce73f3a6fc0 ("ata: libahci_platform: Add function returning a clock-handle by id")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Revert the dropping of the cache invalidation from the arm64
arch_dma_prep_coherent() as it caused a regression in the
qcom_q6v5_mss remoteproc driver.
The driver is already buggy but the original arm64 change made
the problem obvious. The change will be re-introduced once the
driver is fixed"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"
|
|
Pull kvm fixes from Paolo Bonzini:
"Unless anything comes from the ARM side, this should be the last pull
request for this release - and it's mostly documentation:
- Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
- s390: fix multi-epoch extension in nested guests
- x86: fix uninitialized variable on nested triple fault"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
KVM: Move halt-polling documentation into common directory
KVM: x86: fix uninitialized variable use on KVM_REQ_TRIPLE_FAULT
KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two zero-day fixes for the xen-netback driver (XSA-423 and XSA-424)"
* tag 'for-linus-xsa-6.1-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netback: don't call kfree_skb() with interrupts disabled
xen/netback: Ensure protocol headers don't fall in the non-linear area
|
|
This reverts commit c44094eee32f32f175aadc0efcac449d99b1bbf7.
Although the semantics of the DMA API require only a clean operation
here, it turns out that the Qualcomm 'qcom_q6v5_mss' remoteproc driver
(ab)uses the DMA API for transferring the modem firmware to the secure
world via calls to Trustzone [1].
Once the firmware buffer has changed hands, _any_ access from the
non-secure side (i.e. Linux) will be detected on the bus and result in a
full system reset [2]. Although this is possible even with this revert
in place (due to speculative reads via the cacheable linear alias of
memory), anecdotally the problem occurs considerably more frequently
when the lines have not been invalidated, assumedly due to some
micro-architectural interactions with the cache hierarchy.
Revert the offending change for now, along with a comment, so that the
Qualcomm developers have time to fix the driver [3] to use a firmware
buffer which does not have a cacheable alias in the linear map.
Link: https://lore.kernel.org/r/20221114110329.68413-1-manivannan.sadhasivam@linaro.org [1]
Link: https://lore.kernel.org/r/CAMi1Hd3H2k1J8hJ6e-Miy5+nVDNzv6qQ3nN-9929B0GbHJkXEg@mail.gmail.com/ [2]
Link: https://lore.kernel.org/r/20221206092152.GD15486@thinkpad [2]
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20221206103403.646-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So remove kfree_skb()
from the spin_lock_irqsave() section and use the already existing
"drop" label in xenvif_start_xmit() for dropping the SKB. At the
same time replace the dev_kfree_skb() call there with a call of
dev_kfree_skb_any(), as xenvif_start_xmit() can be called with
disabled interrupts.
This is XSA-424 / CVE-2022-42328 / CVE-2022-42329.
Fixes: be81992f9086 ("xen/netback: don't queue unlimited number of packages")
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In some cases, the frontend may send a packet where the protocol headers
are spread across multiple slots. This would result in netback creating
an skb where the protocol headers spill over into the non-linear area.
Some drivers and NICs don't handle this properly resulting in an
interface reset or worse.
This issue was introduced by the removal of an unconditional skb pull in
the tx path to improve performance. Fix this without reintroducing the
pull by setting up grant copy ops for as many slots as needed to reach
the XEN_NETBACK_TX_COPY_LEN size. Adjust the rest of the code to handle
multiple copy operations per skb.
This is XSA-423 / CVE-2022-3643.
Fixes: 7e5d7753956b ("xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Fix the potential risk of OOB if skb_linearize() fails in
tipc_link_proto_rcv().
Fixes: 5cbb28a4bf65 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.
Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is warning report about of_node refcount leak
while probing mdio device:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4
In of_mdiobus_register_device(), we increase fwnode refcount
by fwnode_handle_get() before associating the of_node with
mdio device, but it has never been decreased in normal path.
Since that, in mdio_device_release(), it needs to call
fwnode_handle_put() in addition instead of calling kfree()
directly.
After above, just calling mdio_device_free() in the error handle
path of of_mdiobus_register_device() is enough to keep the
refcount balanced.
Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.
Fixes: 542ae60af24f ("net: hisilicon: Add Fast Ethernet MAC driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The nicvf_probe() won't destroy workqueue when register_netdev()
failed. Add destroy_workqueue err handle case to fix this issue.
Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The skb is delivered to napi_gro_receive() which may free it, after calling this,
dereferencing skb may trigger use-after-free.
Fixes: 1c59eb678cbd ("ravb: Fillup ravb_rx_gbeth() stub")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221203092941.10880-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mchp_sparx5_probe() won't destroy workqueue created by
create_singlethread_workqueue() in sparx5_start() when later
inits failed. Add destroy_workqueue in the cleanup_ports case,
also add it in mchp_sparx5_remove()
Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221203070259.19560-1-linqiheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Although the type I ERSPAN is based on the barebones IP + GRE
encapsulation and no extra ERSPAN header. Report erspan version on GRE
interface looks unreasonable. Fix this by separating the erspan and gre
fill info.
IPv6 GRE does not have this info as IPv6 only supports erspan version
1 and 2.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: f989d546a2d5 ("erspan: Add type I version 0 support.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux
is not released.
Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20221203020903.383235-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be
cleared, and another CPU can start napi thread and access per-CQ variable,
cq->work_done. If the other thread (for example, from busy_poll) sets
it to a value >= budget, this thread will continue to run when it should
stop, and cause memory corruption and panic.
To fix this issue, save the per-CQ work_done variable in a local variable
before napi_complete_done(), so it won't be corrupted by a possible
concurrent thread after napi_complete_done().
Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done
variable race is fixed, so the driver is able to reliably support features
like busy_poll.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1670010190-28595-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In dt-binding snps,dwmac.yaml, some properties under "snps,axi-config"
node are named without "axi_" prefix, but the driver expects the
prefix. Since the dt-binding has been there for a long time, we'd
better make driver match the binding for compatibility.
Fixes: afea03656add ("stmmac: rework DMA bus setting and introduce new platform AXI structure")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221202161739.2203-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The node returned by of_get_parent() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
end of of_pinctrl_get().
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
A device might have a core quirk for NVME_QUIRK_IGNORE_DEV_SUBNQN
(such as Samsung X5) but it would still give a:
"missing or invalid SUBNQN field"
warning as core quirks are filled after calling nvme_init_subnqn. Fill
ctrl->quirks from struct core_quirks before calling nvme_init_subsystem
to fix this.
Tested on a Samsung X5.
Fixes: ab9e00cc72fa ("nvme: track subsystems")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported:
memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18)
This appears to be a legitimate lack of bounds checking in
nci_add_new_protocol(). Add the missing checks.
Reported-by: syzbot+210e196cef4711b65139@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/0000000000001c590f05ee7b3ff4@google.com
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221202214410.never.693-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
proc_skip_spaces() seems to think it is working on C strings, and ends
up being just a wrapper around skip_spaces() with a really odd calling
convention.
Instead of basing it on skip_spaces(), it should have looked more like
proc_skip_char(), which really is the exact same function (except it
skips a particular character, rather than whitespace). So use that as
inspiration, odd coding and all.
Now the calling convention actually makes sense and works for the
intended purpose.
Reported-and-tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
proc_get_long() is passed a size_t, but then assigns it to an 'int'
variable for the length. Let's not do that, even if our IO paths are
limited to MAX_RW_COUNT (exactly because of these kinds of type errors).
So do the proper test in the rigth type.
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When SEV is enabled gmr's and mob's are explicitly disabled because
the encrypted system memory can not be used by the hypervisor.
The driver was disabling GMR's but the presentation code, which depends
on GMR's, wasn't honoring it which lead to black screen on hosts
with SEV enabled.
Make sure screen objects presentation is not used when guest memory
regions have been disabled to fix presentation on SEV enabled hosts.
Fixes: 3b0d6458c705 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nicholas Hunt <nhunt@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201175341.491884-1-zack@kde.org
|
|
When __do_semtimedop() goes to sleep because it has to wait for a
semaphore value becoming zero or becoming bigger than some threshold, it
links the on-stack sem_queue to the sem_array, then goes to sleep
without holding a reference on the sem_array.
When __do_semtimedop() comes back out of sleep, one of two things must
happen:
a) We prove that the on-stack sem_queue has been disconnected from the
(possibly freed) sem_array, making it safe to return from the stack
frame that the sem_queue exists in.
b) We stabilize our reference to the sem_array, lock the sem_array, and
detach the sem_queue from the sem_array ourselves.
sem_array has RCU lifetime, so for case (b), the reference can be
stabilized inside an RCU read-side critical section by locklessly
checking whether the sem_queue is still connected to the sem_array.
However, the current code does the lockless check on sem_queue before
starting an RCU read-side critical section, so the result of the
lockless check immediately becomes useless.
Fix it by doing rcu_read_lock() before the lockless check. Now RCU
ensures that if we observe the object being on our queue, the object
can't be freed until rcu_read_unlock().
This bug is only hittable on kernel builds with full preemption support
(either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full).
Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or
IP6 flow director filters. Flow director does not support filtering
on l4 bytes for PCTYPEs used by IP4 and IP6 filters.
Without this patch, user could create filters with l4_4_bytes fields,
which did not do any filtering on L4, but only on L3 fields.
Fixes: 36777d9fa24c ("i40e: check current configured input set when adding ntuple filters")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After spawning max VFs on a PF, some VFs were not getting resources and
their MAC addresses were 0. This was caused by PF sleeping before flushing
HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for
VF.
Fix by adding a sleep after hw flush.
Fixes: e4b433f4a741 ("i40e: reset all VFs in parallel when rebuilding PF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
