summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-11-27ASoC: Intel: sof_maxim_common: add else between 2 if testBard Liao
if (!strcmp(codec_dai->component->name, MAX_98373_DEV0_NAME)) and if (!strcmp(codec_dai->component->name, MAX_98373_DEV1_NAME)) can't be true at the same time. Add an else to clarify it. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127152654.28204-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: Intel: sof_ssp_amp: remove dead codeBrent Lu
This patch fixes a dead code problem when calculating BE ID for each HDMI-In link. Signed-off-by: Brent Lu <brent.lu@intel.com> Reviewed-by: Balamurugan C <balamurugan.c@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127152654.28204-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: Intel: soc-acpi-intel-mtl-match: Add rt722 supportChao Song
This patch adds match table for rt722 codec on link 0. RT722 is a multi-function codec, three endpoints are created for its headset, amp and dmic functions. Signed-off-by: Chao Song <chao.song@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127133448.18449-8-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: Intel: soc-acpi: add Gen4.1 SDCA board support for LNL RVPChao Song
This patch adds support for LNL RVP with Realtek Gen4.1 SDCA codec board, the codec layout is: SDW0: RT711 Headphone SDW1: RT714 DMIC SDW2: RT1316 Speaker SDW3: RT1316 Speaker Signed-off-by: Chao Song <chao.song@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127133448.18449-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: Intel: soc-acpi: rt713+rt1316, no sdw-dmic configMac Chiang
This is additional HW board: rt713+rt1316 without rt713-dmic configuration: SDW0: rt713 audio jack SDW1: rt1316 spk_amp_l SDW2: rt1316 spk_amp_r Signed-off-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127133448.18449-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: Intel: sof_sdw: Add rt722 supportChao Song
RT722 is a multi-function codec which supports headset, amp, and dmic functions. Each function provides a DAI which can be used in different dailinks. The RT711 supports up to 3 SoundWire lanes, but that should not have any impact in the machine driver: the lanes are allocated and controlled by the manager and bandwidth allocation algorithm. Signed-off-by: Chao Song <chao.song@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127133448.18449-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: Intel: sof_sdw: remove unused function declarationChao Song
The functions sof_sdw_rt712_sdca_init() and sof_sdw_rt712_sdca_exit() declared in header file are never implemented and used, remove them. Signed-off-by: Chao Song <chao.song@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127133448.18449-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: Intel: sof_sdw: Make use of dev_err_probe()Peter Ujfalusi
The devm_snd_soc_register_card() can return with -EPROBE_DEFER and in that case the driver should not print an error message. Closes: https://github.com/thesofproject/linux/issues/4668 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Link: https://lore.kernel.org/r/20231127133448.18449-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: SOF: Intel: Use existing helpers to change GPROCEN and PIE bitsPeter Ujfalusi
Instead of directly changing the GPROCEN/PIE bits in PPCTL we should use the existing helper hda_dsp_ctrl_ppcap_enable() and hda_dsp_ctrl_ppcap_int_enable() helpers for clarity. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231127104313.16661-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: SOF: Intel: mtl: call dsp dump when boot retry failsYong Zhi
Call snd_sof_dsp_dbg_dump() with the same flags/dump_msg as used in function hda_loader.c/cl_dsp_init(). Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231127105235.30071-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: sh: convert not to use dma_request_slave_channel()Christophe JAILLET
dma_request_slave_channel() is deprecated. dma_request_chan() should be used directly instead. Switch to the preferred function and update the error handling accordingly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/1a837f96f056fa3dcb02a77afa5892d40b354cb1.1700417934.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: audio-graph-card2-custom-sample: add CPU/Codec = N:M sampleKuninori Morimoto
Now ASoC is supporting CPU/Codec = N:M connection, add its sample settings. One note here is that it has many type of samples, it reached to maximum of sound minor number. Therefore, new sample is disabled so far. If you want to try it, you need to disable some other one instead. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87o7fy4ey0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: audio-graph-card2-custom-sample: Add connection imageKuninori Morimoto
Audio Graph Card2 is supporting many type of Sound connections, but thus it is very difficult to understand how these are connected. To support well understanding, adds each connection images and indicates each settings are for where. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pm0e4ezi.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: audio-graph-card2: add CPU:Codec = N:M supportKuninori Morimoto
Now ASoC is supporting CPU:Codec = N:M support. This patch enables it on Audio Graph Card2. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r0ku4f0t.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: audio-graph-card2: use better image for Multi connectionKuninori Morimoto
1st port on Multi ports is for paired CPU/Codec, and the 2nd or later port are for Multi Elements. This patch indicates its image to easy to understand. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87sf5a4f1i.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-27ASoC: makes CPU/Codec channel connection map more genericKuninori Morimoto
Current ASoC CPU:Codec = N:M connection is using connection mapping idea, but it is used for N < M case only. We want to use it for any case. By this patch, not only N:M connection, but all existing connection (1:1, 1:N, N:N) will use same connection mapping. Then, because it will use default mapping, no conversion patch is needed to exising drivers. More over, CPU:Codec = N:M (N > M) also supported in the same time. ch_maps array will has CPU/Codec index by this patch. Image CPU0 <---> Codec0 CPU1 <-+-> Codec1 CPU2 <-/ ch_map ch_map[0].cpu = 0 ch_map[0].codec = 0 ch_map[1].cpu = 1 ch_map[1].codec = 1 ch_map[2].cpu = 2 ch_map[2].codec = 1 Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/87ttpq4f2c.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-26Linux 6.7-rc3Linus Torvalds
2023-11-26Merge tag 'trace-v6.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt:: "Eventfs fixes: - With the usage of simple_recursive_remove() recommended by Al Viro, the code should not be calling "d_invalidate()" itself. Doing so is causing crashes. The code was calling d_invalidate() on the race of trying to look up a file while the parent was being deleted. This was detected, and the added dentry was having d_invalidate() called on it, but the deletion of the directory was also calling d_invalidate() on that same dentry. - A fix to not free the eventfs_inode (ei) until the last dput() was called on its ei->dentry made the ei->dentry exist even after it was marked for free by setting the ei->is_freed. But code elsewhere still was checking if ei->dentry was NULL if ei->is_freed is set and would trigger WARN_ON if that was the case. That's no longer true and there should not be any warnings when it is true. - Use GFP_NOFS for allocations done under eventfs_mutex. The eventfs_mutex can be taken on file system reclaim, make sure that allocations done under that mutex do not trigger file system reclaim. - Clean up code by moving the taking of inode_lock out of the helper functions and into where they are needed, and not use the parameter to know to take it or not. It must always be held but some callers of the helper function have it taken when they were called. - Warn if the inode_lock is not held in the helper functions. - Warn if eventfs_start_creating() is called without a parent. As eventfs is underneath tracefs, all files created will have a parent (the top one will have a tracefs parent). Tracing update: - Add Mathieu Desnoyers as an official reviewer of the tracing subsystem" * tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer eventfs: Make sure that parent->d_inode is locked in creating files/dirs eventfs: Do not allow NULL parent to eventfs_start_creating() eventfs: Move taking of inode_lock into dcache_dir_open_wrapper() eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held eventfs: Do not invalidate dentry in create_file/dir_dentry() eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
2023-11-26Merge tag 'parisc-for-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "This patchset fixes and enforces correct section alignments for the ex_table, altinstructions, parisc_unwind, jump_table and bug_table which are created by inline assembly. Due to not being correctly aligned at link & load time they can trigger unnecessarily the kernel unaligned exception handler at runtime. While at it, I switched the bug table to use relative addresses which reduces the size of the table by half on 64-bit. We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs from HP-UX, which now trigger build-issues with glibc. We can simply remove them. Most of the patches are tagged for stable kernel series. Summary: - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc build issues - Fix section alignments for ex_table, altinstructions, parisc unwind table, jump_table and bug_table - Reduce size of bug_table on 64-bit kernel by using relative pointers" * tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Reduce size of the bug_table on 64-bit kernel by half parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes parisc: Use natural CPU alignment for bug_table parisc: Ensure 32-bit alignment on parisc unwind section parisc: Mark lock_aligned variables 16-byte aligned on SMP parisc: Mark jump_table naturally aligned parisc: Mark altinstructions read-only and 32-bit aligned parisc: Mark ex_table entries 32-bit aligned in uaccess.h parisc: Mark ex_table entries 32-bit aligned in assembly.h
2023-11-26Merge tag 'x86-urgent-2023-11-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode fixes from Ingo Molnar: "Fix/enhance x86 microcode version reporting: fix the bootup log spam, and remove the driver version announcement to avoid version confusion when distros backport fixes" * tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Rework early revisions reporting x86/microcode: Remove the driver announcement and version
2023-11-26Merge tag 'perf-urgent-2023-11-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration code resulting in non-working events on those platforms" * tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities
2023-11-26Merge tag 'locking-urgent-2023-11-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "Fix lockdep block chain corruption resulting in KASAN warnings" * tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix block chain corruption
2023-11-26Merge tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - use after free fix in releasing multichannel interfaces - fixes for special file types (report char, block, FIFOs properly when created e.g. by NFS to Windows) - fixes for reporting various special file types and symlinks properly when using SMB1 * tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: introduce cifs_sfu_make_node() smb: client: set correct file type from NFS reparse points smb: client: introduce ->parse_reparse_point() smb: client: implement ->query_reparse_point() for SMB1 cifs: fix use after free for iface while disabling secondary channels
2023-11-25Merge tag 'usb-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY / Thunderbolt fixes from Greg KH: "Here are a number of reverts, fixes, and new device ids for 6.7-rc3 for the USB, PHY, and Thunderbolt driver subsystems. Include in here are: - reverts of some PHY drivers that went into 6.7-rc1 that shouldn't have been merged yet, the author is reworking them based on review comments as they were using older apis that shouldn't be used anymore for newer drivers - small thunderbolt driver fixes for reported issues - USB driver fixes for a variety of small issues in dwc3, typec, xhci, and other smaller drivers. - new device ids for usb-serial and onboard_usb_hub drivers. All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) USB: serial: option: add Luat Air72*U series products USB: dwc3: qcom: fix ACPI platform device leak USB: dwc3: qcom: fix software node leak on probe errors USB: dwc3: qcom: fix resource leaks on probe deferral USB: dwc3: qcom: simplify wakeup interrupt setup USB: dwc3: qcom: fix wakeup after probe deferral dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types usb: misc: onboard-hub: add support for Microchip USB5744 dt-bindings: usb: microchip,usb5744: Add second supply usb: misc: ljca: Fix enumeration error on Dell Latitude 9420 USB: serial: option: add Fibocom L7xx modules USB: xhci-plat: fix legacy PHY double init usb: typec: tipd: Supply also I2C driver data usb: xhci-mtk: fix in-ep's start-split check failure usb: dwc3: set the dma max_seg_size usb: config: fix iteration issue in 'usb_get_bos_descriptor()' usb: dwc3: add missing of_node_put and platform_device_put USB: dwc2: write HCINT with INTMASK applied usb: misc: ljca: Drop _ADR support to get ljca children devices usb: cdnsp: Fix deadlock issue during using NCM gadget ...
2023-11-25Merge tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fix from Chandan Babu: - Validate quota records recovered from the log before writing them to the disk. * tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: dquot recovery does not validate the recovered dquot xfs: clean up dqblk extraction
2023-11-25Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix "rodata=on" not disabling "rodata=full" on arm64 - Add arm64 make dependency between vmlinuz.efi and Image, leading to occasional build failures previously (with parallel building) - Add newline to the output formatting of the za-fork kselftest * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: add dependency between vmlinuz.efi and Image kselftest/arm64: Fix output formatting for za-fork arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
2023-11-25Merge tag 'for-linus-6.7a-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A small cleanup patch for the Xen privcmd driver - A fix for the swiotlb-xen driver which was missing the advertising of the maximum mapping length - A fix for Xen on Arm for a longstanding bug, which happened to occur only recently: a structure in percpu memory crossed a page boundary, which was rejected by the hypervisor * tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: fix xen_vcpu_info allocation alignment xen: privcmd: Replace zero-length array with flex-array member and use __counted_by swiotlb-xen: provide the "max_mapping_size" method
2023-11-25ASoC: SOF: ipc4: Add support for control changeMark Brown
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: This series adds support for handling control (switch/enum) change notifications sent by the firmware. The use case is similar to what is already used by IPC3 version: the firmware can update the value of an enum or switch and sends notification to the kernel, which in turn will notify the user space of a change.
2023-11-25parisc: Reduce size of the bug_table on 64-bit kernel by halfHelge Deller
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative offsets to the bug address and the source file name instead of 64-bit absolute addresses. This effectively reduces the size of the bug_table[] array by half on 64-bit kernels. Signed-off-by: Helge Deller <deller@gmx.de>
2023-11-25parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codesHelge Deller
Those return codes are only defined for the parisc architecture and are leftovers from when we wanted to be HP-UX compatible. They are not returned by any Linux kernel syscall but do trigger problems with the glibc strerrorname_np() and strerror() functions as reported in glibc issue #31080. There is no need to keep them, so simply remove them. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Bruno Haible <bruno@clisp.org> Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080 Cc: stable@vger.kernel.org
2023-11-25parisc: Use natural CPU alignment for bug_tableHelge Deller
Make sure that the __bug_table section gets 32- or 64-bit aligned, depending if a 32- or 64-bit kernel is being built. Mark it non-writeable and use .blockz instead of the .org assembler directive to pad the struct. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Ensure 32-bit alignment on parisc unwind sectionHelge Deller
Make sure the .PARISC.unwind section will be 32-bit aligned. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark lock_aligned variables 16-byte aligned on SMPHelge Deller
On parisc we need 16-byte alignment for variables which are used for locking. Mark the __lock_aligned attribute acordingly so that the .data..lock_aligned section will get that alignment in the generated object files. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark jump_table naturally alignedHelge Deller
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel) or one 64-bit word (on 64-bit kernel). Ensure that the last word is always 64-bit aligned on a 64-bit kernel by aligning the whole structure on sizeof(long). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark altinstructions read-only and 32-bit alignedHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark ex_table entries 32-bit aligned in uaccess.hHelge Deller
Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark ex_table entries 32-bit aligned in assembly.hHelge Deller
Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-24Merge tag 's390-6.7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Remove unnecessary assignment of the performance event last_tag. - Create missing /sys/firmware/ipl/* attributes when kernel is booted in dump mode using List-directed ECKD IPL. - Remove odd comment. - Fix s390-specific part of scripts/checkstack.pl script that only matches three-digit numbers starting with 3 or any higher number and skips any stack sizes smaller than 304 bytes. * tag 's390-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: scripts/checkstack.pl: match all stack sizes for s390 s390: remove odd comment s390/ipl: add missing IPL_TYPE_ECKD_DUMP case to ipl_init() s390/pai: cleanup event initialization
2023-11-24Merge tag 'acpi-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA and fix an ACPI processor idle issue leading to triple-faults in Xen HVM guests and an ACPI backlight driver issue that causes GPUs to misbehave while their children power is being fixed up. Specifics: - Avoid powering up GPUs while attempting to fix up power for their children (Hans de Goede) - Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead() so as to avoid triple-falts during CPU online in Xen HVM guests due to the setting of the hardirqs_enabled flag in safe_halt() (David Woodhouse) - Add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA (Hans de Goede)" * tag 'acpi-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA ACPI: video: Use acpi_device_fix_up_power_children() ACPI: PM: Add acpi_device_fix_up_power_children() function ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
2023-11-24Merge tag 'pm-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a syntax error in the sleepgraph utility which causes it to exit early on every invocation (David Woodhouse)" * tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: tools: Fix sleepgraph syntax error
2023-11-24Merge tag 'afs-fixes-20231124' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: - Fix the afs_server_list struct to be cleaned up with RCU - Fix afs to translate a no-data result from a DNS lookup into ENOENT, not EDESTADDRREQ for consistency with OpenAFS - Fix afs to translate a negative DNS lookup result into ENOENT rather than EDESTADDRREQ - Fix file locking on R/O volumes to operate in local mode as the server doesn't handle exclusive locks on such files - Set SB_RDONLY on superblocks for RO and Backup volumes so that the VFS can see that they're read only * tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY afs: Fix file locking on R/O volumes to operate in local mode afs: Return ENOENT if no cell DNS record can be found afs: Make error on cell lookup failure consistent with OpenAFS afs: Fix afs_server_list to be cleaned up with RCU
2023-11-24Merge branches 'acpi-video' and 'acpi-processor' into acpiRafael J. Wysocki
Merge ACPI backlight driver fixes and an ACPI processor driver fix for 6.7-rc3: - Avoid powering up GPUs while attempting to fix up power for their children (Hans de Goede). - Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead() so as to avoid triple-falts during CPU online in Xen HVM guests due to the setting of the hardirqs_enabled flag in safe_halt() (David Woodhouse). * acpi-video: ACPI: video: Use acpi_device_fix_up_power_children() ACPI: PM: Add acpi_device_fix_up_power_children() function * acpi-processor: ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
2023-11-24Merge tag 'vfs-6.7-rc3.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Avoid calling back into LSMs from vfs_getattr_nosec() calls. IMA used to query inode properties accessing raw inode fields without dedicated helpers. That was finally fixed a few releases ago by forcing IMA to use vfs_getattr_nosec() helpers. The goal of the vfs_getattr_nosec() helper is to query for attributes without calling into the LSM layer which would be quite problematic because incredibly IMA is called from __fput()... __fput() -> ima_file_free() What it does is to call back into the filesystem to update the file's IMA xattr. Querying the inode without using vfs_getattr_nosec() meant that IMA didn't handle stacking filesystems such as overlayfs correctly. So the switch to vfs_getattr_nosec() is quite correct. But the switch to vfs_getattr_nosec() revealed another bug when used on stacking filesystems: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() -> security_inode_getattr() # calls back into LSMs Now, if that __fput() happens from task_work_run() of an exiting task current->fs and various other pointer could already be NULL. So anything in the LSM layer relying on that not being NULL would be quite surprised. Fix that by passing the information that this is a security request through to the stacking filesystem by adding a new internal ATT_GETATTR_NOSEC flag. Now the callchain becomes: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> if (AT_GETATTR_NOSEC) vfs_getattr_nosec() else vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() - Fix a bug introduced with the iov_iter rework from last cycle. This broke /proc/kcore by copying too much and without the correct offset. - Add a missing NULL check when allocating the root inode in autofs_fill_super(). - Fix stable writes for multi-device filesystems (xfs, btrfs etc) and the block device pseudo filesystem. Stable writes used to be a superblock flag only, making it a per filesystem property. Add an additional AS_STABLE_WRITES mapping flag to allow for fine-grained control. - Ensure that offset_iterate_dir() returns 0 after reaching the end of a directory so it adheres to getdents() convention. * tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: libfs: getdents() should return 0 after reaching EOD xfs: respect the stable writes flag on the RT device xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags block: update the stable_writes flag in bdev_add filemap: add a per-mapping stable writes flag autofs: add: new_inode check in autofs_fill_super() iov_iter: fix copy_page_to_iter_nofault() fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
2023-11-24Merge tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Back to regular scheduled fixes pull request, mainly a bunch of msm, some i915 and otherwise a few scattered, one memory crasher in the nouveau GSP paths is helping stabilise that work. msm: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup i915: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path panel: - Fixes for innolux and auo,b101uan08.3 panel. - Fix Himax83102-j02 timings. ivpu: - Fix ivpu MMIO reset. ast: - AST fix on connetor disconnection. nouveau: - gsp memory corruption fix rockchip: - color fix" * tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm: nouveau/gsp: allocate enough space for all channel ids. drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP drm/ast: Disconnect BMC if physical connector is connected accel/ivpu/37xx: Fix hangs related to MMIO reset drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full drm/i915: do not clean GT table on error path drm/i915/dp_mst: Fix race between connector registration and setup drm/panel: simple: Fix Innolux G101ICE-L01 timings drm/panel: simple: Fix Innolux G101ICE-L01 bus flags drm/msm: remove unnecessary NULL check drm/panel: auo,b101uan08.3: Fine tune the panel power sequence drm/msm/dp: attach the DP subconnector property drm/msm/dp: don't touch DP subconnector property in eDP case drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog drm/msm: remove exra drm_kms_helper_poll_init() call drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy
2023-11-24Merge tag 'usb-serial-6.7-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 6.7-rc3 Here are a couple of modem device entry fixes and some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.7-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (329 commits) USB: serial: option: add Luat Air72*U series products USB: serial: option: add Fibocom L7xx modules USB: serial: option: fix FM101R-GL defines USB: serial: option: don't claim interface 4 for ZTE MF290 Linux 6.7-rc2 prctl: Disable prctl(PR_SET_MDWE) on parisc parisc/power: Fix power soft-off when running on qemu parisc: Replace strlcpy() with strscpy() NFSD: Fix checksum mismatches in the duplicate reply cache NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update() NFSD: Update nfsd_cache_append() to use xdr_stream nfsd: fix file memleak on client_opens_release dm-crypt: start allocating with MAX_ORDER dm-verity: don't use blocking calls from tasklets dm-bufio: fix no-sleep mode dm-delay: avoid duplicate logic dm-delay: fix bugs introduced by kthread mode dm-delay: fix a race between delay_presuspend and delay_bio drm/amdgpu/gmc9: disable AGP aperture drm/amdgpu/gmc10: disable AGP aperture ...
2023-11-24ASoC: SOF: ipc4: Handle ALSA kcontrol change notification from firmwarePeter Ujfalusi
The control change notification is sent as module notification with a standardized event_id (higher 16 bit is 0xA15A). Add generic code to handle the module notification and invoke the control update callback if the notification is an ALSA kcontrol change message. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231124150853.18648-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24ASoC: SOF: ipc4-control: Implement control update for switch/enum controlsPeter Ujfalusi
Implement the sof_ipc_tplg_control_ops.update function to support a control change notification from the firmware on switch or enum control types. Based on the module notification message content, look up the swidget, then the scontrol which was the source of the notification then if the message contains the changed values update the cached values. If only a notification without values received, marked the control as dirty and on next read access fetch the new values from the firmware. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231124150853.18648-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24ASoC: SOF: ipc4: Add data struct for module notification message from firmwarePeter Ujfalusi
With the module notification message the information about the notification is provided via the mailbox with the sof_ipc4_notify_module_data struct. It contains the module and instance id of the sender of the notification, the event_id and optionally additional data which is module and event specific. At the same time add definitions to identify ALSA kcontrol change notification. These notifications use standardized event_id, modules must follow this if they support such notifications: upper 16 bit: 0xA15A as a magic identification value lower 16 bit: param_id of the changed control Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231124150853.18648-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24ASoC: SOF: ipc4-topology: Helper to find an swidget by module/instance idPeter Ujfalusi
The sof_ipc4_find_swidget_by_ids() can be used to find the swidget of a module instance. The lookup parameters are the module_id and the instance_id. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231124150853.18648-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-24afs: Mark a superblock for an R/O or Backup volume as SB_RDONLYDavid Howells
Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when mounting it. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
generated by cgit (git 2.34.1) at 2025-04-13 07:08:50 +0000