summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-28usbnet: ipheth: break up NCM header size computationFoster Snowhill
Originally, the total NCM header size was computed as the sum of two vaguely labelled constants. While accurate, it wasn't particularly clear where they were coming from. Use sizes of existing NCM structs where available. Define the total NDP16 size based on the maximum amount of DPEs that can fit into the iOS-specific fixed-size header. This change does not fix any particular issue. Rather, it introduces intermediate constants that will simplify subsequent commits. It should also make it clearer for the reader where the constant values come from. Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: refactor NCM datagram loopFoster Snowhill
Introduce an rx_error label to reduce repetitions in the header signature checks. Store wDatagramIndex and wDatagramLength after endianness conversion to avoid repeated le16_to_cpu() calls. Rewrite the loop to return on a null trailing DPE, which is required by the CDC NCM spec. In case it is missing, fall through to rx_error. This change does not fix any particular issue. Its purpose is to simplify a subsequent commit that fixes a potential OoB read by limiting the maximum amount of processed DPEs. Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: use static NDP16 location in URBFoster Snowhill
Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately. Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support") Cc: stable@vger.kernel.org Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: check that DPE points past NCM headerFoster Snowhill
By definition, a DPE points at the start of a network frame/datagram. Thus it makes no sense for it to point at anything that's part of the NCM header. It is not a security issue, but merely an indication of a malformed DPE. Enforce that all DPEs point at the data portion of the URB, past the NCM header. Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support") Cc: stable@vger.kernel.org Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: fix possible overflow in DPE length checkFoster Snowhill
Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length. Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support") Cc: stable@vger.kernel.org Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28ptp: Properly handle compat ioctlsThomas Weißschuh
Pointer arguments passed to ioctls need to pass through compat_ptr() to work correctly on s390; as explained in Documentation/driver-api/ioctl.rst. Detect compat mode at runtime and call compat_ptr() for those commands which do take pointer arguments. Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/lkml/1ba5d3a4-7931-455b-a3ce-85a968a7cb10@app.fastmail.com/ Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20250125-posix-clock-compat_ioctl-v2-1-11c865c500eb@weissschuh.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28net: usb: rtl8150: enable basic endpoint checkingNikita Zhandarovich
Syzkaller reports [1] encountering a common issue of utilizing a wrong usb endpoint type during URB submitting stage. This, in turn, triggers a warning shown below. For now, enable simple endpoint checking (specifically, bulk and interrupt eps, testing control one is not essential) to mitigate the issue with a view to do other related cosmetic changes later, if they are necessary. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv> Modules linked in: CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8> RSP: 0018:ffffc9000441f740 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9 RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001 RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733 __dev_open+0x2d4/0x4e0 net/core/dev.c:1474 __dev_change_flags+0x561/0x720 net/core/dev.c:8838 dev_change_flags+0x8f/0x160 net/core/dev.c:8910 devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177 inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x116/0x280 net/socket.c:1222 sock_ioctl+0x22e/0x6c0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc04ef73d49 ... This change has not been tested on real hardware. Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250124093020.234642-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-27Merge branch '200GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-01-24 (idpf, ice, iavf) For idpf: Emil adds memory barrier when accessing control queue descriptors and restores call to idpf_vc_xn_shutdown() when resetting. Manoj Vishwanathan expands transaction lock to properly protect xn->salt value and adds additional debugging information. Marco Leogrande converts workqueues to be unbound. For ice: Przemek fixes incorrect size use for array. Mateusz removes reporting of invalid parameter and value. For iavf: Michal adjusts some VLAN changes to occur without a PF call to avoid timing issues with the calls. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: allow changing VLAN state without calling PF ice: remove invalid parameter of equalizer ice: fix ice_parser_rt::bst_key array size idpf: add more info during virtchnl transaction timeout/salt mismatch idpf: convert workqueues to unbound idpf: Acquire the lock before accessing the xn->salt idpf: fix transaction timeouts on reset idpf: add read memory barrier when checking descriptor done bit ==================== Link: https://patch.msgid.link/20250124213213.1328775-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27Merge tag 'ipsec-2025-01-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2025-01-27 1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs. From Jianbo Liu. 2) Fix an out-of-bounds read on xfrm state lookup. From Florian Westphal. 3) Fix secpath handling on packet offload mode. From Alexandre Cassen. 4) Fix the usage of skb->sk in the xfrm layer. 5) Don't disable preemption while looking up cache state to fix PREEMPT_RT. From Sebastian Sewior. * tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Don't disable preemption while looking up cache state. xfrm: Fix the usage of skb->sk xfrm: delete intermediate secpath entry in packet offload mode xfrm: state: fix out-of-bounds read during lookup xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO ==================== Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27Merge branch 'mptcp-fixes-addressing-syzbot-reports'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: fixes addressing syzbot reports Recently, a few issues linked to MPTCP have been reported by syzbot. All the remaining ones are addressed in this series. - Patch 1: Address "KMSAN: uninit-value in mptcp_incoming_options (2)". A fix for v5.11. - Patch 2: Address "WARNING in mptcp_pm_nl_set_flags (2)". A fix for v5.18. - Patch 3: Address "WARNING in __mptcp_clean_una (2)". A fix for v6.4, backported up to v6.1. ==================== Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-0-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27mptcp: handle fastopen disconnect correctlyPaolo Abeni
Syzbot was able to trigger a data stream corruption: WARNING: CPU: 0 PID: 9846 at net/mptcp/protocol.c:1024 __mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024 Modules linked in: CPU: 0 UID: 0 PID: 9846 Comm: syz-executor351 Not tainted 6.13.0-rc2-syzkaller-00059-g00a5acdbf398 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024 Code: fa ff ff 48 8b 4c 24 18 80 e1 07 fe c1 38 c1 0f 8c 8e fa ff ff 48 8b 7c 24 18 e8 e0 db 54 f6 e9 7f fa ff ff e8 e6 80 ee f5 90 <0f> 0b 90 4c 8b 6c 24 40 4d 89 f4 e9 04 f5 ff ff 44 89 f1 80 e1 07 RSP: 0018:ffffc9000c0cf400 EFLAGS: 00010293 RAX: ffffffff8bb0dd5a RBX: ffff888033f5d230 RCX: ffff888059ce8000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000c0cf518 R08: ffffffff8bb0d1dd R09: 1ffff110170c8928 R10: dffffc0000000000 R11: ffffed10170c8929 R12: 0000000000000000 R13: ffff888033f5d220 R14: dffffc0000000000 R15: ffff8880592b8000 FS: 00007f6e866496c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6e86f491a0 CR3: 00000000310e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __mptcp_clean_una_wakeup+0x7f/0x2d0 net/mptcp/protocol.c:1074 mptcp_release_cb+0x7cb/0xb30 net/mptcp/protocol.c:3493 release_sock+0x1aa/0x1f0 net/core/sock.c:3640 inet_wait_for_connect net/ipv4/af_inet.c:609 [inline] __inet_stream_connect+0x8bd/0xf30 net/ipv4/af_inet.c:703 mptcp_sendmsg_fastopen+0x2a2/0x530 net/mptcp/protocol.c:1755 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1830 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6e86ebfe69 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 1f 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6e86649168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6e86f491b8 RCX: 00007f6e86ebfe69 RDX: 0000000030004001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6e86f491b0 R08: 00007f6e866496c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6e86f491bc R13: 000000000000006e R14: 00007ffe445d9420 R15: 00007ffe445d9508 </TASK> The root cause is the bad handling of disconnect() generated internally by the MPTCP protocol in case of connect FASTOPEN errors. Address the issue increasing the socket disconnect counter even on such a case, to allow other threads waiting on the same socket lock to properly error out. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Reported-by: syzbot+ebc0b8ae5d3590b2c074@syzkaller.appspotmail.com Closes: https://lore.kernel.org/67605870.050a0220.37aaf.0137.GAE@google.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/537 Tested-by: syzbot+ebc0b8ae5d3590b2c074@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-3-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27mptcp: pm: only set fullmesh for subflow endpMatthieu Baerts (NGI0)
With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address. Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before. That's what syzbot found, triggering the following warning: WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 00000000000011f4 </TASK> Here, syzbot managed to set the 'fullmesh' flag on an 'implicit' and used -- according to 'id_avail_bitmap' -- endpoint, causing the PM to try decrement the local_addr_used counter which is only incremented for the 'subflow' endpoint. Note that 'no type' endpoints -- not 'subflow', 'signal', 'implicit' -- are fine, because their ID will not be marked as used in the 'id_avail' bitmap, and setting 'fullmesh' can help forcing the creation of subflow when receiving an ADD_ADDR. Fixes: 73c762c1f07d ("mptcp: set fullmesh flag in pm_netlink") Cc: stable@vger.kernel.org Reported-by: syzbot+cd16e79c1e45f3fe0377@syzkaller.appspotmail.com Closes: https://lore.kernel.org/6786ac51.050a0220.216c54.00a6.GAE@google.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/540 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-2-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27mptcp: consolidate suboption statusPaolo Abeni
MPTCP maintains the received sub-options status is the bitmask carrying the received suboptions and in several bitfields carrying per suboption additional info. Zeroing the bitmask before parsing is not enough to ensure a consistent status, and the MPTCP code has to additionally clear some bitfiled depending on the actually parsed suboption. The above schema is fragile, and syzbot managed to trigger a path where a relevant bitfield is not cleared/initialized: BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline] BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline] BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline] BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 __mptcp_expand_seq net/mptcp/options.c:1030 [inline] mptcp_expand_seq net/mptcp/protocol.h:864 [inline] ack_update_msk net/mptcp/options.c:1060 [inline] mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264 tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236 __ip_finish_output+0x287/0x810 ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434 dst_output include/net/dst.h:450 [inline] ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550 __tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 ____sys_sendmsg+0x877/0xb60 net/socket.c:2583 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: mptcp_get_options+0x2c0f/0x2f20 net/mptcp/options.c:397 mptcp_incoming_options+0x19a/0x3d30 net/mptcp/options.c:1150 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264 tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 Uninit was stored to memory at: put_unaligned_be32 include/linux/unaligned.h:68 [inline] mptcp_write_options+0x17f9/0x3100 net/mptcp/options.c:1417 mptcp_options_write net/ipv4/tcp_output.c:465 [inline] tcp_options_write+0x6d9/0xe90 net/ipv4/tcp_output.c:759 __tcp_transmit_skb+0x294b/0x4900 net/ipv4/tcp_output.c:1414 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 ____sys_sendmsg+0x877/0xb60 net/socket.c:2583 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: mptcp_pm_add_addr_signal+0x3d7/0x4c0 mptcp_established_options_add_addr net/mptcp/options.c:666 [inline] mptcp_established_options+0x1b9b/0x3a00 net/mptcp/options.c:884 tcp_established_options+0x2c4/0x7d0 net/ipv4/tcp_output.c:1012 __tcp_transmit_skb+0x5b7/0x4900 net/ipv4/tcp_output.c:1333 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 ____sys_sendmsg+0x877/0xb60 net/socket.c:2583 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: mptcp_pm_add_addr_received+0x95f/0xdd0 net/mptcp/pm.c:235 mptcp_incoming_options+0x2983/0x3d30 net/mptcp/options.c:1169 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_state_process+0x2a38/0x49d0 net/ipv4/tcp_input.c:6972 tcp_v4_do_rcv+0xbf9/0x11a0 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 Local variable mp_opt created at: mptcp_incoming_options+0x119/0x3d30 net/mptcp/options.c:1127 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 The current schema is too fragile; address the issue grouping all the state-related data together and clearing the whole group instead of just the bitmask. This also cleans-up the code a bit, as there is no need to individually clear "random" bitfield in a couple of places any more. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Cc: stable@vger.kernel.org Reported-by: syzbot+23728c2df58b3bd175ad@syzkaller.appspotmail.com Closes: https://lore.kernel.org/6786ac51.050a0220.216c54.00a7.GAE@google.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/541 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-1-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net: davicom: fix UAF in dm9000_drv_removeChenyuan Yang
dm is netdev private data and it cannot be used after free_netdev() call. Using dm after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. This is similar to the issue fixed in commit ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove"). This bug is detected by our static analysis tool. Fixes: cf9e60aa69ae ("net: davicom: Fix regulator not turned off on driver removal") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> CC: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20250123214213.623518-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net: phy: c45-tjaxx: add delay between MDIO write and read in soft_resetMilos Reljin
In application note (AN13663) for TJA1120, on page 30, there's a figure with average PHY startup timing values following software reset. The time it takes for SMI to become operational after software reset ranges roughly from 500 us to 1500 us. This commit adds 2000 us delay after MDIO write which triggers software reset. Without this delay, soft_reset function returns an error and prevents successful PHY init. Cc: stable@vger.kernel.org Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103") Signed-off-by: Milos Reljin <milos_reljin@outlook.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/AM8P250MB0124D258E5A71041AF2CC322E1E32@AM8P250MB0124.EURP250.PROD.OUTLOOK.COM Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27vxlan: Fix uninit-value in vxlan_vnifilter_dump()Shigeru Yoshida
KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1]. If the length of the netlink message payload is less than sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes beyond the message. This can lead to uninit-value access. Fix this by returning an error in such situations. [1] BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786 netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317 __netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline] rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882 netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4110 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205 kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196 netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250123145746.785768-1-syoshida@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27rxrpc, afs: Fix peer hash locking vs RCU callbackDavid Howells
In its address list, afs now retains pointers to and refs on one or more rxrpc_peer objects. The address list is freed under RCU and at this time, it puts the refs on those peers. Now, when an rxrpc_peer object runs out of refs, it gets removed from the peer hash table and, for that, rxrpc has to take a spinlock. However, it is now being called from afs's RCU cleanup, which takes place in BH context - but it is just taking an ordinary spinlock. The put may also be called from non-BH context, and so there exists the possibility of deadlock if the BH-based RCU cleanup happens whilst the hash spinlock is held. This led to the attached lockdep complaint. Fix this by changing spinlocks of rxnet->peer_hash_lock back to BH-disabling locks. ================================ WARNING: inconsistent lock state 6.13.0-rc5-build2+ #1223 Tainted: G E -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff88810babe228 (&rxnet->peer_hash_lock){+.?.}-{3:3}, at: rxrpc_put_peer+0xcb/0x180 {SOFTIRQ-ON-W} state was registered at: mark_usage+0x164/0x180 __lock_acquire+0x544/0x990 lock_acquire.part.0+0x103/0x280 _raw_spin_lock+0x2f/0x40 rxrpc_peer_keepalive_worker+0x144/0x440 process_one_work+0x486/0x7c0 process_scheduled_works+0x73/0x90 worker_thread+0x1c8/0x2a0 kthread+0x19b/0x1b0 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30 irq event stamp: 972402 hardirqs last enabled at (972402): [<ffffffff8244360e>] _raw_spin_unlock_irqrestore+0x2e/0x50 hardirqs last disabled at (972401): [<ffffffff82443328>] _raw_spin_lock_irqsave+0x18/0x60 softirqs last enabled at (972300): [<ffffffff810ffbbe>] handle_softirqs+0x3ee/0x430 softirqs last disabled at (972313): [<ffffffff810ffc54>] __irq_exit_rcu+0x44/0x110 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&rxnet->peer_hash_lock); <Interrupt> lock(&rxnet->peer_hash_lock); *** DEADLOCK *** 1 lock held by swapper/1/0: #0: ffffffff83576be0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire+0x7/0x30 stack backtrace: CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G E 6.13.0-rc5-build2+ #1223 Tainted: [E]=UNSIGNED_MODULE Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x80 print_usage_bug.part.0+0x227/0x240 valid_state+0x53/0x70 mark_lock_irq+0xa5/0x2f0 mark_lock+0xf7/0x170 mark_usage+0xe1/0x180 __lock_acquire+0x544/0x990 lock_acquire.part.0+0x103/0x280 _raw_spin_lock+0x2f/0x40 rxrpc_put_peer+0xcb/0x180 afs_free_addrlist+0x46/0x90 [kafs] rcu_do_batch+0x2d2/0x640 rcu_core+0x2f7/0x350 handle_softirqs+0x1ee/0x430 __irq_exit_rcu+0x44/0x110 irq_exit_rcu+0xa/0x30 sysvec_apic_timer_interrupt+0x7f/0xa0 </IRQ> Fixes: 72904d7b9bfb ("rxrpc, afs: Allow afs to pin rxrpc_peer objects") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/2095618.1737622752@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27selftests: net/{lib,openvswitch}: extend CFLAGS to keep options from environmentJan Stancek
Package build environments like Fedora rpmbuild introduced hardening options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS and LDFLAGS. Some Makefiles currently override CFLAGS but not LDFLAGS, which leads to a mismatch and build failure, for example: /usr/bin/ld: /tmp/ccd2apay.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIE /usr/bin/ld: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/lib/csum] Error 1 openvswitch/Makefile CFLAGS currently do not appear to be used, but fix it anyway for the case when new tests are introduced in future. Fixes: 1d0dc857b5d8 ("selftests: drv-net: add checksum tests") Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/3d173603ee258f419d0403363765c9f9494ff79a.1737635092.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27selftests: mptcp: extend CFLAGS to keep options from environmentJan Stancek
Package build environments like Fedora rpmbuild introduced hardening options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS and LDFLAGS. mptcp Makefile currently overrides CFLAGS but not LDFLAGS, which leads to a mismatch and build failure, for example: make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/mptcp/mptcp_sockopt] Error 1 /usr/bin/ld: /tmp/ccqyMVdb.o: relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a PIE object; recompile with -fPIE /usr/bin/ld: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Fixes: cc937dad85ae ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk") Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/7abc701da9df39c2d6cd15bc3cf9e6cee445cb96.1737621162.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net: page_pool: don't try to stash the napi idJakub Kicinski
Page ppol tried to cache the NAPI ID in page pool info to avoid having a dependency on the life cycle of the NAPI instance. Since commit under Fixes the NAPI ID is not populated until napi_enable() and there's a good chance that page pool is created before NAPI gets enabled. Protect the NAPI pointer with the existing page pool mutex, the reading path already holds it. napi_id itself we need to READ_ONCE(), it's protected by netdev_lock() which are not holding in page pool. Before this patch napi IDs were missing for mlx5: # ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get [{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912}, {'id': 143, 'ifindex': 2, 'inflight': 5568, 'inflight-mem': 22806528}, {'id': 142, 'ifindex': 2, 'inflight': 5120, 'inflight-mem': 20971520}, {'id': 141, 'ifindex': 2, 'inflight': 4992, 'inflight-mem': 20447232}, ... After: [{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912, 'napi-id': 565}, {'id': 143, 'ifindex': 2, 'inflight': 4224, 'inflight-mem': 17301504, 'napi-id': 525}, {'id': 142, 'ifindex': 2, 'inflight': 4288, 'inflight-mem': 17563648, 'napi-id': 524}, ... Fixes: 86e25f40aa1e ("net: napi: Add napi_config") Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250123231620.1086401-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27netdevsim: don't assume core pre-populates HDS params on GETJakub Kicinski
Syzbot reports: BUG: KMSAN: uninit-value in nsim_get_ringparam+0xa8/0xe0 drivers/net/netdevsim/ethtool.c:77 nsim_get_ringparam+0xa8/0xe0 drivers/net/netdevsim/ethtool.c:77 ethtool_set_ringparam+0x268/0x570 net/ethtool/ioctl.c:2072 __dev_ethtool net/ethtool/ioctl.c:3209 [inline] dev_ethtool+0x126d/0x2a40 net/ethtool/ioctl.c:3398 dev_ioctl+0xb0e/0x1280 net/core/dev_ioctl.c:759 This is the SET path, where we call GET to either check user request against max values, or check if any of the settings will change. The logic in netdevsim is trying to report the default (ENABLED) if user has not requested any specific setting. The user setting is recorded in dev->cfg, don't depend on kernel_ringparam being pre-populated with it. Fixes: 928459bbda19 ("net: ethtool: populate the default HDS params in the core") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+b3bcd80232d00091e061@syzkaller.appspotmail.com Tested-by: syzbot+b3bcd80232d00091e061@syzkaller.appspotmail.com Link: https://patch.msgid.link/20250123221410.1067678-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27MAINTAINERS: add Paul Fertser as a NC-SI reviewerJakub Kicinski
Paul has been providing very solid reviews for NC-SI changes lately, so much so I started CCing him on all NC-SI patches. Make the designation official. Reviewed-by: Paul Fertser <fercerpav@gmail.com> Link: https://patch.msgid.link/20250123155540.943243-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27Merge branch 'eth-fix-calling-napi_enable-in-atomic-context'Jakub Kicinski
Jakub Kicinski says: ==================== eth: fix calling napi_enable() in atomic context Dan has reported that I missed a lot of drivers which call napi_enable() in atomic with the naive coccinelle search for spin locks: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Fix them. Most of the fixes involve taking the netdev_lock() before the spin lock. mt76 is special because we can just move napi_enable() from the BH section. All patches compile tested only. v2: https://lore.kernel.org/20250123004520.806855-1-kuba@kernel.org v1: https://lore.kernel.org/20250121221519.392014-1-kuba@kernel.org ==================== Link: https://patch.msgid.link/20250124031841.1179756-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27wifi: mt76: move napi_enable() from under BHJakub Kicinski
mt76 does a lot of: local_bh_disable(); napi_enable(...napi); napi_schedule(...napi); local_bh_enable(); local_bh_disable() is not a real lock, its most likely taken because napi_schedule() requires that we invoke softirqs at some point. napi_enable() needs to take a mutex, so move it from under the BH protection. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27eth: via-rhine: fix calling napi_enable() in atomic contextJakub Kicinski
napi_enable() may sleep now, take netdev_lock() before rp->lock. napi_enable() is hidden inside init_registers(). Note that this patch orders netdev_lock after rp->task_lock, to avoid having to take the netdev_lock() around disable path. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27eth: niu: fix calling napi_enable() in atomic contextJakub Kicinski
napi_enable() may sleep now, take netdev_lock() before np->lock. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27eth: 8139too: fix calling napi_enable() in atomic contextJakub Kicinski
napi_enable() may sleep now, take netdev_lock() before tp->lock and tp->rx_lock. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Link: https://patch.msgid.link/20250124031841.1179756-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27eth: forcedeth: fix calling napi_enable() in atomic contextJakub Kicinski
napi_enable() may sleep now, take netdev_lock() before np->lock. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27eth: forcedeth: remove local wrappers for napi enable/disableJakub Kicinski
The local helpers for calling napi_enable() and napi_disable() don't serve much purpose and they will complicate the fix in the subsequent patch. Remove them, call the core functions directly. Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27eth: tg3: fix calling napi_enable() in atomic contextJakub Kicinski
tg3 has a spin lock protecting most of the config, switch to taking netdev_lock() explicitly on enable/start paths. Disable/stop paths seem to not be under the spin lock (since napi_disable() already needs to sleep), so leave that side as is. tg3_restart_hw() releases and re-takes the spin lock, we need to do the same because dev_close() needs to take netdev_lock(). Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250124031841.1179756-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27tools: ynl: c: correct reverse decode of empty attrsJakub Kicinski
netlink reports which attribute was incorrect by sending back an attribute offset. Offset points to the address of struct nlattr, but to interpret the type we also need the nesting path. Attribute IDs have different meaning in different nests of the same message. Correct the condition for "is the offset within current attribute". ynl_attr_data_len() does not include the attribute header, so the end offset was off by 4 bytes. This means that we'd always skip over flags and empty nests. The devmem tests, for example, issues an invalid request with empty queue nests, resulting in the following error: YNL failed: Kernel error: missing attribute: .queues.ifindex The message is incorrect, "queues" nest does not have an "ifindex" attribute defined. With this fix we decend correctly into the nest: YNL failed: Kernel error: missing attribute: .queues.id Fixes: 86878f14d71a ("tools: ynl: user space helpers") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250124012130.1121227-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27ptp: Ensure info->enable callback is always setThomas Weißschuh
The ioctl and sysfs handlers unconditionally call the ->enable callback. Not all drivers implement that callback, leading to NULL dereferences. Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c. Instead use a dummy callback if no better was specified by the driver. Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250123-ptp-enable-v1-1-b015834d3a47@weissschuh.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27documentation: networking: fix spelling mistakesKhaled Elnaggar
Fix a couple of typos/spelling mistakes in the documentation. Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://patch.msgid.link/20250123082521.59997-1-khaledelnaggarlinux@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net/mlx5e: add missing cpu_to_node to kvzalloc_node in mlx5e_open_xdpredirect_sqStanislav Fomichev
kvzalloc_node is not doing a runtime check on the node argument (__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES triggers OOB access and panic (see the trace below). Add missing cpu_to_node call to convert cpu id to node id. [ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up [ 166.479327] BUG: unable to handle page fault for address: 0000000800000010 [ 166.494592] #PF: supervisor read access in kernel mode [ 166.505995] #PF: error_code(0x0000) - not-present page ... [ 166.816958] Call Trace: [ 166.822380] <TASK> [ 166.827034] ? __die_body+0x64/0xb0 [ 166.834774] ? page_fault_oops+0x2cd/0x3f0 [ 166.843862] ? exc_page_fault+0x63/0x130 [ 166.852564] ? asm_exc_page_fault+0x22/0x30 [ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.871897] ? get_partial_node+0x1c/0x320 [ 166.880983] ? deactivate_slab+0x269/0x2b0 [ 166.890069] ___slab_alloc+0x521/0xa90 [ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.908442] __kmalloc_node_noprof+0x216/0x3f0 [ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.928354] __kvmalloc_node_noprof+0x43/0xd0 [ 166.938021] mlx5e_open_channels+0x5e2/0xc00 [ 166.947496] mlx5e_open_locked+0x3e/0xf0 [ 166.956201] mlx5e_open+0x23/0x50 [ 166.963551] __dev_open+0x114/0x1c0 [ 166.971292] __dev_change_flags+0xa2/0x1b0 [ 166.980378] dev_change_flags+0x21/0x60 [ 166.988887] do_setlink+0x38d/0xf20 [ 166.996628] ? ep_poll_callback+0x1b9/0x240 [ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70 [ 167.020782] ? __wake_up_sync_key+0x52/0x80 [ 167.030066] ? __mutex_lock+0xff/0x550 [ 167.038382] ? security_capable+0x50/0x90 [ 167.047279] rtnl_setlink+0x1c9/0x210 [ 167.055403] ? ep_poll_callback+0x1b9/0x240 [ 167.064684] ? security_capable+0x50/0x90 [ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310 [ 167.082667] ? rtnetlink_bind+0x30/0x30 [ 167.091173] netlink_rcv_skb+0xb1/0xe0 [ 167.099492] netlink_unicast+0x20f/0x2e0 [ 167.108191] netlink_sendmsg+0x389/0x420 [ 167.116896] __sys_sendto+0x158/0x1c0 [ 167.125024] __x64_sys_sendto+0x22/0x30 [ 167.133534] do_syscall_64+0x63/0x130 [ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0 [ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: bb135e40129d ("net/mlx5e: move XDP_REDIRECT sq to dynamic allocation") Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250123000407.3464715-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net: netdevsim: try to close UDP port harness racesJakub Kicinski
syzbot discovered that we remove the debugfs files after we free the netdev. Try to clean up the relevant dir while the device is still around. Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net: rose: fix timer races against user threadsEric Dumazet
Rose timers only acquire the socket spinlock, without checking if the socket is owned by one user thread. Add a check and rearm the timers if needed. BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174 Read of size 2 at addr ffff88802f09b82a by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174 call_timer_fn+0x187/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2430 run_timer_base kernel/time/timer.c:2439 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2449 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1049 </IRQ> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250122180244.1861468-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net: the appletalk subsystem no longer uses ndo_do_ioctl谢致邦 (XIE Zhibang)
ndo_do_ioctl is no longer used by the appletalk subsystem after commit 45bd1c5ba758 ("net: appletalk: Drop aarp_send_probe_phase1()"). Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/tencent_4AC6ED413FEA8116B4253D3ED6947FDBCF08@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net/ncsi: use dev_set_mac_address() for Get MC MAC Address handlingPaul Fertser
Copy of the rationale from 790071347a0a1a89e618eedcd51c687ea783aeb3: Change ndo_set_mac_address to dev_set_mac_address because dev_set_mac_address provides a way to notify network layer about MAC change. In other case, services may not aware about MAC change and keep using old one which set from network adapter driver. As example, DHCP client from systemd do not update MAC address without notification from net subsystem which leads to the problem with acquiring the right address from DHCP server. Since dev_set_mac_address requires RTNL lock the operation can not be performed directly in the response handler, see 9e2bbab94b88295dcc57c7580393c9ee08d7314d. The way of selecting the first suitable MAC address from the list is changed, instead of having the driver check it this patch just assumes any valid MAC should be good. Fixes: b8291cf3d118 ("net/ncsi: Add NC-SI 1.2 Get MC MAC Address command") Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-24iavf: allow changing VLAN state without calling PFMichal Swiatkowski
First case: > ip l a l $VF name vlanx type vlan id 100 > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 As workqueue can be execute after sometime, there is a window to have call trace like that: - iavf_del_vlan - iavf_add_vlan - iavf_del_vlans (wq) It means that our VLAN 100 will change the state from IAVF_VLAN_ACTIVE to IAVF_VLAN_REMOVE (iavf_del_vlan). After that in iavf_add_vlan state won't be changed because VLAN 100 is on the filter list. The final result is that the VLAN 100 filter isn't added in hardware (no iavf_add_vlans call). To fix that change the state if the filter wasn't removed yet directly to active. It is save as IAVF_VLAN_REMOVE means that virtchnl message wasn't sent yet. Second case: > ip l a l $VF name vlanx type vlan id 100 Any type of VF reset ex. change trust > ip l s $PF vf $VF_NUM trust on > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 In case of reset iavf driver is responsible for readding all filters that are being used. To do that all VLAN filters state are changed to IAVF_VLAN_ADD. Here is even longer window for changing VLAN state from kernel side, as workqueue isn't called immediately. We can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_del_vlans (wq) Not exsisitng VLAN filters will be removed from hardware. It isn't a bug, ice driver will handle it fine. However, we can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_add_vlan (called from kernel ops) - iavf_del_vlans (wq) With fix for previous case we end up with no VLAN filters in hardware. We have to remove VLAN filters if the state is IAVF_VLAN_ADD and delete VLAN was called. It is save as IAVF_VLAN_ADD means that virtchnl message wasn't sent yet. Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24ice: remove invalid parameter of equalizerMateusz Polchlopek
It occurred that in the commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") the invalid DRATE parameter for reading has been added. The output of the command: $ ethtool -d <ethX> returns the garbage value in the place where DRATE value should be stored. Remove mentioned parameter to prevent return of corrupted data to userspace. Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24ice: fix ice_parser_rt::bst_key array sizePrzemek Kitszel
Fix &ice_parser_rt::bst_key size. It was wrongly set to 10 instead of 20 in the initial impl commit (see Fixes tag). All usage code assumed it was of size 20. That was also the initial size present up to v2 of the intro series [2], but halved by v3 [3] refactor described as "Replace magic hardcoded values with macros." The introducing series was so big that some ugliness was unnoticed, same for bugs :/ ICE_BST_KEY_TCAM_SIZE and ICE_BST_TCAM_KEY_SIZE were differing by one. There was tmp variable @j in the scope of edited function, but was not used in all places. This ugliness is now gone. I'm moving ice_parser_rt::pg_prio a few positions up, to fill up one of the holes in order to compensate for the added 10 bytes to the ::bst_key, resulting in the same size of the whole as prior to the fix, and minimal changes in the offsets of the fields. Extend also the debug dump print of the key to cover all bytes. To not have string with 20 "%02x" and 20 params, switch to ice_debug_array_w_prefix(). This fix obsoletes Ahmed's attempt at [1]. [1] https://lore.kernel.org/intel-wired-lan/20240823230847.172295-1-ahmed.zaki@intel.com [2] https://lore.kernel.org/intel-wired-lan/20230605054641.2865142-13-junfeng.guo@intel.com [3] https://lore.kernel.org/intel-wired-lan/20230817093442.2576997-13-junfeng.guo@intel.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/b1fb6ff9-b69e-4026-9988-3c783d86c2e0@stanley.mountain Fixes: 9a4c07aaa0f5 ("ice: add parser execution main loop") CC: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: add more info during virtchnl transaction timeout/salt mismatchManoj Vishwanathan
Add more information related to the transaction like cookie, vc_op, salt when transaction times out and include similar information when transaction salt does not match. Info output for transaction timeout: ------------------- (op:5015 cookie:45fe vc_op:5015 salt:45 timeout:60000ms) ------------------- before it was: ------------------- (op 5015, 60000ms) ------------------- Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: convert workqueues to unboundMarco Leogrande
When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. Tested: * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Signed-off-by: Marco Leogrande <leogrande@google.com> Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: Acquire the lock before accessing the xn->saltManoj Vishwanathan
The transaction salt was being accessed before acquiring the idpf_vc_xn_lock when idpf has to forward the virtchnl reply. Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager") Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: fix transaction timeouts on resetEmil Tantilov
Restore the call to idpf_vc_xn_shutdown() at the beginning of idpf_vc_core_deinit() provided the function is not called on remove. In the reset path the mailbox is destroyed, leading to all transactions timing out. Fixes: 09d0fb5cb30e ("idpf: deinit virtchnl transaction manager after vport and vectors") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: add read memory barrier when checking descriptor done bitEmil Tantilov
Add read memory barrier to ensure the order of operations when accessing control queue descriptors. Specifically, we want to avoid cases where loads can be reordered: 1. Load #1 is dispatched to read descriptor flags. 2. Load #2 is dispatched to read some other field from the descriptor. 3. Load #2 completes, accessing memory/cache at a point in time when the DD flag is zero. 4. NIC DMA overwrites the descriptor, now the DD flag is one. 5. Any fields loaded before step 4 are now inconsistent with the actual descriptor state. Add read memory barrier between steps 1 and 2, so that load #2 is not executed until load #1 has completed. Fixes: 8077c727561a ("idpf: add controlq init and reset checks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Suggested-by: Lance Richardson <rlance@google.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24xfrm: Don't disable preemption while looking up cache state.Sebastian Sewior
For the state cache lookup xfrm_input_state_lookup() first disables preemption, to remain on the CPU and then retrieves a per-CPU pointer. Within the preempt-disable section it also acquires netns_xfrm::xfrm_state_lock, a spinlock_t. This lock must not be acquired with explicit disabled preemption (such as by get_cpu()) because this lock becomes a sleeping lock on PREEMPT_RT. To remain on the same CPU is just an optimisation for the CPU local lookup. The actual modification of the per-CPU variable happens with netns_xfrm::xfrm_state_lock acquired. Remove get_cpu() and use the state_cache_input on the current CPU. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Closes: https://lore.kernel.org/all/CAADnVQKkCLaj=roayH=Mjiiqz_svdf1tsC3OE4EC0E=mAD+L1A@mail.gmail.com/ Fixes: 81a331a0e72dd ("xfrm: Add an inbound percpu state cache.") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-01-23ipmr: do not call mr_mfc_uses_dev() for unres entriesEric Dumazet
syzbot found that calling mr_mfc_uses_dev() for unres entries would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif alias to "struct sk_buff_head unresolved", which contain two pointers. This code never worked, lets remove it. [1] Unable to handle kernel paging request at virtual address ffff5fff2d536613 KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f] Modules linked in: CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline] lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334 Call trace: mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P) mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P) mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382 ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648 rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327 rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791 netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317 netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg net/socket.c:1055 [inline] sock_read_iter+0x2d8/0x40c net/socket.c:1125 new_sync_read fs/read_write.c:484 [inline] vfs_read+0x740/0x970 fs/read_write.c:565 ksys_read+0x15c/0x26c fs/read_write.c:708 Fixes: cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps") Reported-by: syzbot+5cfae50c0e5f2c500013@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/678fe2d1.050a0220.15cac.00b3.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250121181241.841212-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-23selftests/net: packetdrill: more xfail changes (and a correction)Jakub Kicinski
Recent change to add more cases to XFAIL has a broken regex, the matching needs a real regex not a glob pattern. While at it add the cases Willem pointed out during review. Fixes: 3030e3d57ba8 ("selftests/net: packetdrill: make tcp buf limited timing tests benign") Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250121143423.215261-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-23net: mvneta: fix locking in mvneta_cpu_online()Harshit Mogalapalli
When port is stopped, unlock before returning Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250121005002.3938236-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-06-04 11:13:52 +0000