Age | Commit message (Collapse) | Author |
|
The size given to strscpy() is not consistent with the destination buffer
that is used. The size is related to 'driver' and the buffer is
'mixername'.
sizeof(card->mixername) is 80 and sizeof(card->driver) is 16, so in
theory this could lead to unneeded string truncation.
In practice, this is not the case because g_audio_setup() has only 2
callers. 'card_name' is either "UAC1_Gadget" or "UAC2_Gadget".
Anyway, using the correct size is cleaner and more future proof.
In order to be less verbose, use the new 2-argument version of strscpy()
which computes auto-magically the size of the destination.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bf8a9353319566624f653531b80e5caf3d346ba1.1711176700.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added new bitfield GRSTCTL_CLOCK_SWITH_TIMER in GRSTCTL register.
This bitfield applicable HSOTG cores v5.00 or higher and not
applicable to HS/FS IOT devices.
This bitfield must be programmed to 3'b010 if core will be
used in Low-speed and core configured for any HS/FS PHY interface.
This bitfield must be programmed to 3'b111 if core configured
to use either:
- HS PHY interface UTMI or ULPI
- FS PHY any interface
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/0616838cfee958774c9321c6eeeda4be92f900d8.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added programmming of ULPI_LATCH_EN_DURING_HIB_ENTRY bit in GPWRDN
register when using ULPI PHY during entry/exit to/from hibernation.
This bit set to 1 during entering to hibernation if ULPI PHY used.
On exiting from hibernation this bit reset to 0.
Applicable for both host and device modes.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e024cb39a7177ec201c873df25ca6365f2e55947.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added new bit ULPI_LATCH_EN_DURING_HIB_ENTRY in GPWRDN register.
This bit applicable HSOTG cores v5.00 or higher.
Affects Hibernation Entry and Exit sequence (for both Host and Device)
when using ULPI PHY.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/56d05a4f5750aaa58d8c5bab7705814942a985bd.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To support eUSB2 PHY disconnect flow required in Soft disconnect
state set GOTGCTL_EUSB2_DISC_SUPP bit, if applicable.
On Session End Detected interrupt clear PCGCTL_GATEHCLK and
PCGCTL_STOPPCLK bits if eusb2_disc parameter true.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/9d50b83df693cda8c391313e90048df8dd611c04.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added new parameter eusb2_disc to list of core parameters which specify
whether eUSB2 PHY disconnect support flow applicable or no.
Set to false as default value and checked core version if set to true.
This parameter applicable in device mode of HSOTG and HS IOT cores
v5.00 or higher.
Added print this parameter in show parameters of debugfs.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e77cc4312bda797d1ddaa4351d86c65a69c8b926.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added new bit EUSB2_DISC_SUPP in GOTGCTL register.
This bit applicable in device mode of HSOTG and HS IOT cores
v5.00 or higher.
This bit used for Device Disconnect detection with eUSB2 PHY.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/21e4401895d586afa23c3fa3d3518bd4b7ebd4d5.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added new versions definition for HSOTG core v5.00a and
IOT HS device core v5.00.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/7fc17fe275a54c8a9e00cd00ffc19e62418c1f84.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
Let's opt for the new 2-argument version of strscpy() which guarantees
NUL-termination on the destination buffer and simplifies snytax. The
NUL-padding behavior that strncpy() provides is not required as u3d->eps
is already zero-allocated:
| u3d->eps = kzalloc(size, GFP_KERNEL);
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240318-strncpy-drivers-usb-gadget-udc-mv_u3d_core-c-v1-1-64f8dcdb7c07@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
Let's use the new 2-argument strscpy() as this guarantees
NUL-termination on the destination buffer and also uses the destination
buffer's size to bound the operation.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240318-strncpy-drivers-usb-gadget-function-u_ether-c-v1-1-e8543a1db24a@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent
DRM bridge device instead of handcoding corresponding functionality.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240315-ptn36502-aux-v1-1-c9d3c828ff2e@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240309071757.3152-1-liubo03@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cat_printf() implements the newly introduced seq_buf API.
Use the latter to save some line of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/abf3d0361ea291468d121062207a766b0c3228f2.1710087556.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Macros with good names offer better readability. Besides, also move
the definition to ehci.h.
Signed-off-by: Dingyan Li <18500469033@163.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240309033709.14604-1-18500469033@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/91311e53e9432ae84d5720485c3b436fb7f06227.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
udc device and gadget device are tightly coupled, yet there's no good
way to corelate the two. Add a sysfs link in udc that points to the
corresponding gadget device.
An example use case: userspace configures a f_midi configfs driver and
bind the udc device, then it tries to locate the corresponding midi
device, which is a child device of the gadget device. The gadget device
that's associated to the udc device has to be identified in order to
index the midi device. Having a sysfs link would make things much
easier.
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20240307030922.3573161-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Apple CarLife iAP gadget has a descriptor in userspace with two
alternate settings. The host sends the set_alt request to configure
alt_setting 0 or 1, and this is verified by the subsequent get_alt
request.
This patch implements and sets the get_alt callback. Without the
get_alt callback, composite.c abruptly concludes the
USB_REQ_GET/SET_INTERFACE request, assuming only one alt setting
for the endpoint.
unlike the uvc and ncm, f_fs gadget is fully implemented in userspace,
and driver just reset the eps and generate the event. so no additional
adaptaion associated with this change is not required in set_alt callback
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Link: https://lore.kernel.org/r/20240301124708.120394-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When setting the guid via configfs it is possible to test if
its value is one of the kernel supported ones by calling
uvc_format_by_guid on it. If the result is NULL, we know the
guid is unsupported and can be ignored.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240221-uvc-gadget-configfs-guid-v1-1-f0678ca62ebb@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When setting uncompressed formats, the values of bytesperline and
sizeimage can already be determined by using the v4l2_fill_pixfmt helper
function. We change the try_fmt function to use the helper instead.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240221-uvc-gadget-uncompressed-v1-1-f55e97287cae@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix an incorrect module name and sysfs path in dns resolver
documentation.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240324104338.44083-1-bharathsm@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit to improve NMI stall debuggability:
344da544f177 ("x86/nmi: Print reasons why backtrace NMIs are ignored")
... has shown value, but widespread use has also identified a few
opportunities for improvement.
The systems have (as usual) shown far more creativity than that commit's
author, demonstrating yet again that failing CPUs can do whatever they want.
In addition, the current message format is less friendly than one might
like to those attempting to use these messages to identify failing CPUs.
Therefore, separately flag CPUs that, during the full time that the
stack-backtrace request was waiting, were always in an NMI handler,
were never in an NMI handler, or exited one NMI handler.
Also, split the message identifying the CPU and the time since that CPU's
last NMI-related activity so that a single line identifies the CPU without
any other variable information, greatly reducing the processing overhead
required to identify repeat-offender CPUs.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/ab4d70c8-c874-42dc-b206-643018922393@paulmck-laptop
|
|
The stock bootloader on the Samsung Galaxy Tab 3 8.0 provides an
incorrect available memory range over ATAG_MEM. Limit the usable
memory in the DTS to prevent it from doing so, without having to
disable ATAG support.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20240217-tab3-limit-usable-memory-range-v1-1-49cc9c86a5cc@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Convert Samsung S3C6400/S3C6410 SoC clock controller bindings to DT
schema.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240312185035.720491-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Define CPU cluster 0 and CPU cluster 1 CMUs, which generate CPU clocks,
and add corresponding CPU clocks to CPU nodes.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240301015118.30072-3-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Implement support for CPU clock management units:
- CMU_CPUCL0: clocks for cluster 0: 4 x Cortex-A55 (cpu0..cpu3)
- CMU_CPUCL1: clocks for cluster 1: 4 x Cortex-A55 (cpu4..cpu7)
CPU PLLs are generating main CPU clocks for each cluster, and there are
alternate ("switch") clocks that can be used temporarily while
re-configuring the PLL for a new rate. ACLK, ATCLK, PCLKDBG and
PERIPHCLK clocks are driving corresponding buses. CLK_CLUSTERx_SCLK are
actual leaf CPU clocks and should be used to change CPU rates. Also some
CoreSight clocks can be derived from DBG_USER (debug clock).
PLL table was extracted from ECT table. ECT stands for "Exynos
Characteristic Table", it's a Samsung specific binary data populated by
BL2 bootloader in RAM at 0x90000000 address, containing PLL tables for
various CMUs and other hardware specific information.
The particular PLL type used in CMU_CPUCL0 and CMU_CPUCL1 (pll0822x) is
an integer PLL with middle FVCO. The equation to calculate its output
rate is:
fout = fin * M / (P*2^S)
where:
fin = 26 MHz (OSCCLK frequency)
M = 64..1023
P = 1..63
S = 0..6
The PLL table tries to keep "P" value low to reduce the locking time,
which for pll0822x is "t = P * 150" (in OSCCLK cycles).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240301015118.30072-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Some ARM64 Exynos chips are capable to control PLL clocks automatically.
For those chips, whether the PLL is controlled automatically or manually
is chosen in PLL_CON1 register with next bits:
[28] ENABLE_AUTOMATIC_CLKGATING
[1] MANUAL_PLL_CTRL
[0] AUTO_PLL_CTRL
The bl2 bootloader sets 0x10000001 value for some PLL_CON1 registers,
which means any attempt to control those PLLs manually (e.g.
disabling/enabling those PLLs or changing MUX parent clocks) would lead
to PLL lock timeout with error message like this:
Could not lock PLL ...
At the moment, all Samsung clock drivers implement manual clock control.
So in order to make it possible to control PLLs, corresponding PLL_CON1
registers should be set to 0x2 first.
Some older ARM64 chips don't implement the automatic clock control
though. It also might be desirable to configure some PLLs for manual
control, while keeping the default configuration for the rest. So it'd
convenient to choose this PLL mode for each CMU separately. Introduce
.manual_plls field to CMU structure to choose the PLL control mode.
Because it'll be initialized with "false" in all existing CMU
structures by default, it won't affect any existing clock drivers,
allowing for this feature to be enabled gradually when it's needed with
no change for the rest of users. In case .manual_plls is set, set
PLL_CON1 registers to manual control, akin to what's already done for
gate clocks in exynos_arm64_init_clocks(). Of course, PLL_CON1 registers
should be added to corresponding struct samsung_cmu_info::clk_regs array
to make sure they get initialized.
No functional change. This patch adds a feature, but doesn't enable it
for any users.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240301015118.30072-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The init sequence specifies the 0x11 and 0x29 dsi commands, which are
the exit-sleep and display-on commands.
In the actual prepare step the driver already uses the appropriate
function calls for those, so drop the duplicates.
Fixes: e5f9d543419c ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-2-heiko@sntech.de
|
|
Similar to other variants, the LTK050H3148W wants to run in video mode
when displaying data. So far only the Synopsis DSI driver was using this
panel and it is always switching to video mode, independent of this flag
being set.
Other DSI drivers might handle this differently, so add the flag.
Fixes: e5f9d543419c ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-1-heiko@sntech.de
|
|
The physical address on the MT8188 platform is larger than 32 bits,
change the type from unsigned int to dma_addr_t to be able to access
the high bits of the address.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add a lock for the ctx_list, to avoid accessing a NULL pointer
within the 'vpu_enc_ipi_handler' function when the ctx_list has
been deleted due to an unexpected behavior on the SCP IP block.
Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add a lock for the ctx_list, to avoid accessing a NULL pointer
within the 'vpu_dec_ipi_handler' function when the ctx_list has
been deleted due to an unexpected behavior on the SCP IP block.
Hardware name: Google juniper sku16 board (DT)
pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--)
pc : vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec]
lr : scp_ipi_handler+0xd0/0x194 [mtk_scp]
sp : ffffffc0131dbbd0
x29: ffffffc0131dbbd0 x28: 0000000000000000
x27: ffffff9bb277f348 x26: ffffff9bb242ad00
x25: ffffffd2d440d3b8 x24: ffffffd2a13ff1d4
x23: ffffff9bb7fe85a0 x22: ffffffc0133fbdb0
x21: 0000000000000010 x20: ffffff9b050ea328
x19: ffffffc0131dbc08 x18: 0000000000001000
x17: 0000000000000000 x16: ffffffd2d461c6e0
x15: 0000000000000242 x14: 000000000000018f
x13: 000000000000004d x12: 0000000000000000
x11: 0000000000000001 x10: fffffffffffffff0
x9 : ffffff9bb6e793a8 x8 : 0000000000000000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : fffffffffffffff0
x3 : 0000000000000020 x2 : ffffff9bb6e79080
x1 : 0000000000000010 x0 : ffffffc0131dbc08
Call trace:
vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec (HASH:6c3f 2)]
scp_ipi_handler+0xd0/0x194 [mtk_scp (HASH:7046 3)]
mt8183_scp_irq_handler+0x44/0x88 [mtk_scp (HASH:7046 3)]
scp_irq_handler+0x48/0x90 [mtk_scp (HASH:7046 3)]
irq_thread_fn+0x38/0x94
irq_thread+0x100/0x1c0
kthread+0x140/0x1fc
ret_from_fork+0x10/0x30
Code: 54000088 f94ca50a eb14015f 54000060 (f9400108)
---[ end trace ace43ce36cbd5c93 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: 0x12c4000000 from 0xffffffc010000000
PHYS_OFFSET: 0xffffffe580000000
CPU features: 0x08240002,2188200c
Memory Limit: none
Fixes: 655b86e52eac ("media: mediatek: vcodec: Fix possible invalid memory access for decoder")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The stateless HEVC decoder saves the instance pointer in the context
regardless if the initialization worked or not. This caused a use after
free, when the pointer is freed in case of a failure in the deinit
function.
Only store the instance pointer when the initialization was successful,
to solve this issue.
Hardware name: Acer Tomato (rev3 - 4) board (DT)
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec]
lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec]
sp : ffff80008750bc20
x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000
x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a
x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000
x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80
x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488
x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00
x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000
Call trace:
vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec]
vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec]
vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec]
vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec]
vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec]
mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec]
fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec]
v4l2_release+0x7c/0x100
__fput+0x80/0x2d8
__fput_sync+0x58/0x70
__arm64_sys_close+0x40/0x90
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x38/0xd8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x1a8/0x1b0
Code: d503201f f9401660 b900127f b900227f (f9400400)
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: 2674486aac7d ("media: mediatek: vcodec: support stateless hevc decoder")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The VP9 bitstream uses superframes, which each contain 8 sub-frames,
enable accessing the last superframe by increasing the range of the index
vaidation as the maximum number of superframes is 8 and not 7, so that the
last sub-frame can be decoded normally with the stateful VP9 decoder.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use %x instead of %lx when printing uint32_t variables to fix format
warnings in ARM's arch timer test.
aarch64/arch_timer.c: In function ‘guest_run_stage’:
aarch64/arch_timer.c:138:33: warning: format ‘%lx’ expects argument of type ‘long unsigned int’,
but argument 6 has type ‘uint32_t’ {aka ‘unsigned int’} [-Wformat=]
138 | "config_iter + 1 = 0x%lx, irq_iter = 0x%lx.\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......
141 | config_iter + 1, irq_iter);
| ~~~~~~~~~~~~~~~
| |
| uint32_t {aka unsigned int}
Fixes: d1dafd065a23 ("KVM: arm64: selftests: Enable tuning of error margin in arch_timer test")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240314175116.2366301-1-seanjc@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Commit 11e5ea5242e3 ("KVM: arm64: Use helpers to classify exception
types reported via ESR") tried to abstract the translation fault
check when handling an out-of IPA space condition, but incorrectly
replaced it with a permission fault check.
Restore the previous translation fault check.
Fixes: 11e5ea5242e3 ("KVM: arm64: Use helpers to classify exception types reported via ESR")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Wujie Duan <wjduan@linx-info.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/kvmarm/864jd3269g.wl-maz@kernel.org/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Programming PMU events in the host that count during guest execution is
a feature supported by perf, e.g.
perf stat -e cpu_cycles:G ./lkvm run
While this works for VHE, the guest/host event bitmaps are not carried
through to the hypervisor in the nVHE configuration. Make
kvm_pmu_update_vcpu_events() conditional on whether or not _hardware_
supports PMUv3 rather than if the vCPU as vPMU enabled.
Cc: stable@vger.kernel.org
Fixes: 84d751a019a9 ("KVM: arm64: Pass pmu events to hyp via vcpu")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240305184840.636212-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When TME is disabled by BIOS, the dmesg output is:
x86/tme: not enabled by BIOS
... and TME functionality is not enabled by the kernel, but the TME feature
is still shown in /proc/cpuinfo.
Clear it.
[ mingo: Clarified changelog ]
Signed-off-by: Bingsong Si <sibs@chinatelecom.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Huang, Kai" <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240311071938.13247-1-sibs@chinatelecom.cn
|
|
The Alpha blending for 30 bit RGB/BGR are not
functioning properly for rk3568/rk3588, so remove
it from the format list.
Fixes: bfd8a5c228fa ("drm/rockchip: vop2: Add more supported 10bit formats")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304100952.3592984-1-andyshrk@163.com
|
|
Lockdep detects a possible deadlock as listed below. This is because it
detects the IA55 interrupt controller .irq_eoi() API is called from
interrupt context while configuration-specific API (e.g., .irq_enable())
could be called from process context on resume path (by calling
rzg2l_gpio_irq_restore()). To avoid this, protect the call of
rzg2l_gpio_irq_enable() with spin_lock_irqsave()/spin_unlock_irqrestore().
With this the same approach that is available in __setup_irq() is mimicked
to pinctrl IRQ resume function.
Below is the lockdep report:
WARNING: inconsistent lock state
6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f #90 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
str_rwdt_t_001./159 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff00000b001d70 (&rzg2l_irqc_data->lock){?...}-{2:2}, at: rzg2l_irqc_irq_enable+0x60/0xa4
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x1e0/0x310
_raw_spin_lock+0x44/0x58
rzg2l_irqc_eoi+0x2c/0x130
irq_chip_eoi_parent+0x18/0x20
rzg2l_gpio_irqc_eoi+0xc/0x14
handle_fasteoi_irq+0x134/0x230
generic_handle_domain_irq+0x28/0x3c
gic_handle_irq+0x4c/0xbc
call_on_irq_stack+0x24/0x34
do_interrupt_handler+0x78/0x7c
el1_interrupt+0x30/0x5c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x64/0x68
_raw_spin_unlock_irqrestore+0x34/0x70
__setup_irq+0x4d4/0x6b8
request_threaded_irq+0xe8/0x1a0
request_any_context_irq+0x60/0xb8
devm_request_any_context_irq+0x74/0x104
gpio_keys_probe+0x374/0xb08
platform_probe+0x64/0xcc
really_probe+0x140/0x2ac
__driver_probe_device+0x74/0x124
driver_probe_device+0x3c/0x15c
__driver_attach+0xec/0x1c4
bus_for_each_dev+0x70/0xcc
driver_attach+0x20/0x28
bus_add_driver+0xdc/0x1d0
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
gpio_keys_init+0x18/0x20
do_one_initcall+0x70/0x290
kernel_init_freeable+0x294/0x504
kernel_init+0x20/0x1cc
ret_from_fork+0x10/0x20
irq event stamp: 69071
hardirqs last enabled at (69071): [<ffff800080e0dafc>] _raw_spin_unlock_irqrestore+0x6c/0x70
hardirqs last disabled at (69070): [<ffff800080e0cfec>] _raw_spin_lock_irqsave+0x7c/0x80
softirqs last enabled at (67654): [<ffff800080010614>] __do_softirq+0x494/0x4dc
softirqs last disabled at (67645): [<ffff800080015238>] ____do_softirq+0xc/0x14
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rzg2l_irqc_data->lock);
<Interrupt>
lock(&rzg2l_irqc_data->lock);
*** DEADLOCK ***
4 locks held by str_rwdt_t_001./159:
#0: ffff00000b10f3f0 (sb_writers#4){.+.+}-{0:0}, at: vfs_write+0x1a4/0x35c
#1: ffff00000e43ba88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe8/0x1a8
#2: ffff00000aa21dc8 (kn->active#40){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1a8
#3: ffff80008179d970 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9c/0x278
stack backtrace:
CPU: 0 PID: 159 Comm: str_rwdt_t_001. Not tainted 6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f #90
Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT)
Call trace:
dump_backtrace+0x94/0xe8
show_stack+0x14/0x1c
dump_stack_lvl+0x88/0xc4
dump_stack+0x14/0x1c
print_usage_bug.part.0+0x294/0x348
mark_lock+0x6b0/0x948
__lock_acquire+0x750/0x20b0
lock_acquire+0x1e0/0x310
_raw_spin_lock+0x44/0x58
rzg2l_irqc_irq_enable+0x60/0xa4
irq_chip_enable_parent+0x1c/0x34
rzg2l_gpio_irq_enable+0xc4/0xd8
rzg2l_pinctrl_resume_noirq+0x4cc/0x520
pm_generic_resume_noirq+0x28/0x3c
genpd_finish_resume+0xc0/0xdc
genpd_resume_noirq+0x14/0x1c
dpm_run_callback+0x34/0x90
device_resume_noirq+0xa8/0x268
dpm_noirq_resume_devices+0x13c/0x160
dpm_resume_noirq+0xc/0x1c
suspend_devices_and_enter+0x2c8/0x570
pm_suspend+0x1ac/0x278
state_store+0x88/0x124
kobj_attr_store+0x14/0x24
sysfs_kf_write+0x48/0x6c
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x270/0x35c
ksys_write+0x64/0xec
__arm64_sys_write+0x18/0x20
invoke_syscall+0x44/0x108
el0_svc_common.constprop.0+0xb4/0xd4
do_el0_svc+0x18/0x20
el0_svc+0x3c/0xb8
el0t_64_sync_handler+0xb8/0xbc
el0t_64_sync+0x14c/0x150
Fixes: 254203f9a94c ("pinctrl: renesas: rzg2l: Add suspend/resume support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240320104230.446400-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
'output-enable' properties
On the RZ/G3S SMARC platform, the 'input' property is utilized in
gpio-hog nodes, and the 'output-enable' property is used for ETH0/1 TXC
pins. Update the binding documentation to include these properties,
addressing the following dtbs_check warnings:
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: key-1-gpio-hog: 'anyOf' conditional failed, one must be fixed:
'input' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: eth0: 'anyOf' conditional failed, one must be fixed:
'output-enable' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240313083828.5048-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Originally, with strict in order execution, we could complete execution
only when the queue was empty. Preempt-to-busy allows replacement of an
active request that may complete before the preemption is processed by
HW. If that happens, the request is retired from the queue, but the
queue_priority_hint remains set, preventing direct submission until
after the next CS interrupt is processed.
This preempt-to-busy race can be triggered by the heartbeat, which will
also act as the power-management barrier and upon completion allow us to
idle the HW. We may process the completion of the heartbeat, and begin
parking the engine before the CS event that restores the
queue_priority_hint, causing us to fail the assertion that it is MIN.
<3>[ 166.210729] __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1))
<0>[ 166.210781] Dumping ftrace buffer:
<0>[ 166.210795] ---------------------------------
...
<0>[ 167.302811] drm_fdin-1097 2..s1. 165741070us : trace_ports: 0000:00:02.0 rcs0: promote { ccid:20 1217:2 prio 0 }
<0>[ 167.302861] drm_fdin-1097 2d.s2. 165741072us : execlists_submission_tasklet: 0000:00:02.0 rcs0: preempting last=1217:2, prio=0, hint=2147483646
<0>[ 167.302928] drm_fdin-1097 2d.s2. 165741072us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 1217:2, current 0
<0>[ 167.302992] drm_fdin-1097 2d.s2. 165741073us : __i915_request_submit: 0000:00:02.0 rcs0: fence 3:4660, current 4659
<0>[ 167.303044] drm_fdin-1097 2d.s1. 165741076us : execlists_submission_tasklet: 0000:00:02.0 rcs0: context:3 schedule-in, ccid:40
<0>[ 167.303095] drm_fdin-1097 2d.s1. 165741077us : trace_ports: 0000:00:02.0 rcs0: submit { ccid:40 3:4660* prio 2147483646 }
<0>[ 167.303159] kworker/-89 11..... 165741139us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence c90:2, current 2
<0>[ 167.303208] kworker/-89 11..... 165741148us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:c90 unpin
<0>[ 167.303272] kworker/-89 11..... 165741159us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 1217:2, current 2
<0>[ 167.303321] kworker/-89 11..... 165741166us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:1217 unpin
<0>[ 167.303384] kworker/-89 11..... 165741170us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 3:4660, current 4660
<0>[ 167.303434] kworker/-89 11d..1. 165741172us : __intel_context_retire: 0000:00:02.0 rcs0: context:1216 retire runtime: { total:56028ns, avg:56028ns }
<0>[ 167.303484] kworker/-89 11..... 165741198us : __engine_park: 0000:00:02.0 rcs0: parked
<0>[ 167.303534] <idle>-0 5d.H3. 165741207us : execlists_irq_handler: 0000:00:02.0 rcs0: semaphore yield: 00000040
<0>[ 167.303583] kworker/-89 11..... 165741397us : __intel_context_retire: 0000:00:02.0 rcs0: context:1217 retire runtime: { total:325575ns, avg:0ns }
<0>[ 167.303756] kworker/-89 11..... 165741777us : __intel_context_retire: 0000:00:02.0 rcs0: context:c90 retire runtime: { total:0ns, avg:0ns }
<0>[ 167.303806] kworker/-89 11..... 165742017us : __engine_park: __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1))
<0>[ 167.303811] ---------------------------------
<4>[ 167.304722] ------------[ cut here ]------------
<2>[ 167.304725] kernel BUG at drivers/gpu/drm/i915/gt/intel_engine_pm.c:283!
<4>[ 167.304731] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 167.304734] CPU: 11 PID: 89 Comm: kworker/11:1 Tainted: G W 6.8.0-rc2-CI_DRM_14193-gc655e0fd2804+ #1
<4>[ 167.304736] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
<4>[ 167.304738] Workqueue: i915-unordered retire_work_handler [i915]
<4>[ 167.304839] RIP: 0010:__engine_park+0x3fd/0x680 [i915]
<4>[ 167.304937] Code: 00 48 c7 c2 b0 e5 86 a0 48 8d 3d 00 00 00 00 e8 79 48 d4 e0 bf 01 00 00 00 e8 ef 0a d4 e0 31 f6 bf 09 00 00 00 e8 03 49 c0 e0 <0f> 0b 0f 0b be 01 00 00 00 e8 f5 61 fd ff 31 c0 e9 34 fd ff ff 48
<4>[ 167.304940] RSP: 0018:ffffc9000059fce0 EFLAGS: 00010246
<4>[ 167.304942] RAX: 0000000000000200 RBX: 0000000000000000 RCX: 0000000000000006
<4>[ 167.304944] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009
<4>[ 167.304946] RBP: ffff8881330ca1b0 R08: 0000000000000001 R09: 0000000000000001
<4>[ 167.304947] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881330ca000
<4>[ 167.304948] R13: ffff888110f02aa0 R14: ffff88812d1d0205 R15: ffff88811277d4f0
<4>[ 167.304950] FS: 0000000000000000(0000) GS:ffff88844f780000(0000) knlGS:0000000000000000
<4>[ 167.304952] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 167.304953] CR2: 00007fc362200c40 CR3: 000000013306e003 CR4: 0000000000770ef0
<4>[ 167.304955] PKRU: 55555554
<4>[ 167.304957] Call Trace:
<4>[ 167.304958] <TASK>
<4>[ 167.305573] ____intel_wakeref_put_last+0x1d/0x80 [i915]
<4>[ 167.305685] i915_request_retire.part.0+0x34f/0x600 [i915]
<4>[ 167.305800] retire_requests+0x51/0x80 [i915]
<4>[ 167.305892] intel_gt_retire_requests_timeout+0x27f/0x700 [i915]
<4>[ 167.305985] process_scheduled_works+0x2db/0x530
<4>[ 167.305990] worker_thread+0x18c/0x350
<4>[ 167.305993] kthread+0xfe/0x130
<4>[ 167.305997] ret_from_fork+0x2c/0x50
<4>[ 167.306001] ret_from_fork_asm+0x1b/0x30
<4>[ 167.306004] </TASK>
It is necessary for the queue_priority_hint to be lower than the next
request submission upon waking up, as we rely on the hint to decide when
to kick the tasklet to submit that first request.
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318135906.716055-2-janusz.krzysztofik@linux.intel.com
|
|
Add DT binding documentation for System Controller (SYS) found on
RZ/V2H(P) ("R9A09G057") SoC's.
SYS block contains the SYS_LSI_DEVID register which can be used to
retrieve SoC version information.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240227232531.218159-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document Renesas RZ/V2H(P) (R9A09G057) SoC variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240227232531.218159-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable support for the Renesas RZ/V2H (R9A09G057) SoC in the ARM64
defconfig.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240227232531.218159-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the config for the Renesas DA9062 PMIC and the built-in RTC, GPIO
and ONKEY drivers as it is populated on the RZ/G2UL SMARC EVK
development board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240227130010.45361-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the RZ/G2L display unit DRM drivers used on the RZ/{G2L,G2LC,V2L}
SMARC EVK development boards.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240223123646.245655-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The r9a07g044_resets array describes the reset signals in this SoC and
does not change at runtime.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240320082831.9666-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The r9a07g043_mod_clks and r9a07g043_resets arrays describe the module
clocks and reset signals (respectively) in this SoC and do not change at
runtime.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240320082831.9666-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the module clock used by the Thermal Sensor/Chip Internal Voltage
Monitor/Core Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4M
(R8A779H0) SoC.
Based on a patch in the BSP by Cong Dang.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/befac3e8342cd552f580d34be863ef84403c541f.1709722056.git.geert+renesas@glider.be
|
|
The M2 (CRU main clock), M3 (LCDC Video Clock), and AT (Cortex-A55 Debug
clock) core clocks are only present on RZ/G2UL, not on RZ/Five.
Annotate this in the comments, like is already done for module clocks
and resets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/ffcdcd479c76b92f67481836a33ec86e97f85634.1708944903.git.geert+renesas@glider.be
|