Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix the way optional interrupts are retrieved from firmware in
gpio-mlxbf3
* tag 'gpio-fixes-for-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: use platform_get_irq_optional()
Revert "gpio: mlxbf3: only get IRQ for device instance 0"
|
|
In f07c7cc4684a, do_handle_open() was switched to use the automatic
cleanup method for getting a FD. In that change it was also switched
to pass O_CLOEXEC unconditionally to get_unused_fd_flags() instead
of passing the user-specified flags.
I don't see anything in that commit description that indicates this was
intentional, so I am assuming it was an oversight.
With this fix, the FD will again be opened with, or without, O_CLOEXEC
according to what the user requested.
Fixes: f07c7cc4684a ("fhandle: simplify error handling")
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Link: https://lore.kernel.org/20250814235431.995876-4-tahbertschinger@gmail.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
BN == 0x00 in CIS Established means no isochronous data for the
corresponding direction (Core v6.1 pp. 2394). In this case SDU MTU
should be 0.
However, the specification does not say the Max_PDU_C_To_P or P_To_C are
then zero. Intel AX210 in Framed CIS mode sets nonzero Max_PDU for
direction with zero BN. This causes failure later when we try to LE
Setup ISO Data Path for disabled direction, which is disallowed (Core
v6.1 pp. 2750).
Fix by setting SDU MTU to 0 if BN == 0.
Fixes: 2be22f1941d5f ("Bluetooth: hci_event: Fix parsing of CIS Established Event")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
After LE Extended Scan times out, conn->sid remains 0xFF,
so the PA sync creation process should be aborted.
Btmon snippet from PA sync with SID=0xFF:
< HCI Command: LE Set Extended.. (0x08|0x0042) plen 6 #74726 [hci0] 863.107927
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4 #74727 [hci0] 863.109389
LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
Status: Success (0x00)
< HCI Command: LE Periodic Ad.. (0x08|0x0044) plen 14 #74728 [hci0] 865.141168
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0xff
Adv address type: Random (0x01)
Adv address: 0D:D7:2C:E7:42:46 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
> HCI Event: Command Status (0x0f) plen 4 #74729 [hci0] 865.143223
LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1
Status: Success (0x00)
Fixes: e2d471b7806b ("Bluetooth: ISO: Fix not using SID from adv report")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
ll_privacy_capable only indicates that the controller supports the
feature but it doesnt' check that LE is enabled so it end up being
marked as active in the current settings when it shouldn't.
Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
{cis,bis}_capable only indicates the controller supports the feature
since it doesn't check that LE is enabled so it shall not be used for
current setting, instead this introduces {cis,bis}_enabled macros that
can be used to indicate that these features are currently enabled.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
During the shutdown process, an interrupt occurs that
prematurely terminates the wait for the expected event.
This change replaces TASK_INTERRUPTIBLE with
TASK_UNINTERRUPTIBLE in the wait_on_bit_timeout call to ensure
the shutdown process completes as intended without being
interrupted by signals.
Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c")
Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes Broadcaster/Broadcast Source not sending HCI_OP_LE_TERM_BIG
because HCI_CONN_PER_ADV where not being set.
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Connections with type of PA_LINK shall be considered temporary just to
track the lifetime of PA Sync setup, once the BIG Sync is established
and connection are created with BIS_LINK the existing PA_LINK
connection shall not longer use bis_cleanup otherwise it terminates the
PA Sync when that shall be left to BIS_LINK connection to do it.
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
getname shall return iso_bc fields for both BIS_LINK and PA_LINK since
the likes of bluetoothd do use the getpeername to retrieve the SID both
when enumerating the broadcasters and when synchronizing.
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Passive scanning is used to program the address of the peer to be
synchronized, so once HCI_EV_LE_PA_SYNC_ESTABLISHED is received it
needs to be updated after clearing HCI_PA_SYNC then call
hci_update_passive_scan_sync to return it to its original state.
Fixes: 6d0417e4e1cf ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
list_empty(&hdev->adv_instances) is always true during startup,
so an advertising instance is added by default.
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
hci_setup_ext_adv_instance_sync+0x17c/0x328
hci_powered_update_adv_sync+0xb4/0x12c
hci_powered_update_sync+0x54/0x70
hci_power_on_sync+0xe4/0x278
hci_set_powered_sync+0x28/0x34
set_powered_sync+0x40/0x58
hci_cmd_sync_work+0x94/0x100
process_one_work+0x168/0x444
worker_thread+0x378/0x3f4
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
Link: https://github.com/bluez/bluez/issues/1442
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- tegra: Ensure pmc power-domains are in a known state
* tag 'pmdomain-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
soc/tegra: pmc: Ensure power-domains are in a known state
|
|
Pull smb client fixes from Steve French:
- Fix unlink race and rename races
- SMB3.1.1 compression fix
- Avoid unneeded strlen calls in cifs_get_spnego_key
- Fix slab out of bounds in parse_server_interfaces()
- Fix mid leak and server buffer leak
- smbdirect send error path fix
- update internal version #
- Fix unneeded response time update in negotiate protocol
* tag '6.17-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: remove redundant lstrp update in negotiate protocol
cifs: update internal version number
smb: client: don't wait for info->send_pending == 0 on error
smb: client: fix mid_q_entry memleak leak with per-mid locking
smb3: fix for slab out of bounds on mount to ksmbd
cifs: avoid extra calls to strlen() in cifs_get_spnego_key()
cifs: Fix collect_sample() to handle any iterator type
smb: client: fix race with concurrent opens in rename(2)
smb: client: fix race with concurrent opens in unlink(2)
|
|
Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can
leave event->hw.idx at -1. When PMU drivers later attempt to use this
negative index as a shift exponent in bitwise operations, it leads to UBSAN
shift-out-of-bounds reports.
The issue is a logical flaw in how event groups handle throttling when some
members are intentionally disabled. Based on the analysis and the
reproducer provided by Mark Rutland (this issue on both arm64 and x86-64).
The scenario unfolds as follows:
1. A group leader event is configured with a very aggressive sampling
period (e.g., sample_period = 1). This causes frequent interrupts and
triggers the throttling mechanism.
2. A child event in the same group is created in a disabled state
(.disabled = 1). This event remains in PERF_EVENT_STATE_OFF.
Since it hasn't been scheduled onto the PMU, its event->hw.idx remains
initialized at -1.
3. When throttling occurs, perf_event_throttle_group() and later
perf_event_unthrottle_group() iterate through all siblings, including
the disabled child event.
4. perf_event_throttle()/unthrottle() are called on this inactive child
event, which then call event->pmu->start()/stop().
5. The PMU driver receives the event with hw.idx == -1 and attempts to
use it as a shift exponent. e.g., in macros like PMCNTENSET(idx),
leading to the UBSAN report.
The throttling mechanism attempts to start/stop events that are not
actively scheduled on the hardware.
Move the state check into perf_event_throttle()/perf_event_unthrottle() so
that inactive events are skipped entirely. This ensures only active events
with a valid hw.idx are processed, preventing undefined behavior and
silencing UBSAN warnings. The corrected check ensures true before
proceeding with PMU operations.
The problem can be reproduced with the syzkaller reproducer:
Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group")
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250812181046.292382-2-ysk@kzalloc.com
|
|
Sparse reported a warning:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:305:47:
sparse: expected restricted __le64
sparse: got unsigned long long
Add cpu_to_le64() to fix that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508142105.Jb5Smjsg-lkp@intel.com/
Suggested-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250814193039.2265813-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
While the kernel command line is considered trusted in most environments,
avoid writing 1 byte past the end of "acpiid" if the "str" argument is
maximum length.
Reported-by: Simcha Kosman <simcha.kosman@cyberark.com>
Closes: https://lore.kernel.org/all/AS8P193MB2271C4B24BCEDA31830F37AE84A52@AS8P193MB2271.EURP193.PROD.OUTLOOK.COM
Fixes: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/20250804154023.work.970-kees@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
kernel test robot reported verifier bug [1] where the helper func
pointer could be NULL due to disabled config option.
As Alexei suggested we could check on that in get_helper_proto
directly. Marking tail_call helper func with BPF_PTR_POISON,
because it is unused by design.
[1] https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: syzbot+a9ed3d9132939852d0df@syzkaller.appspotmail.com
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250814200655.945632-1-jolsa@kernel.org
Closes: https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com
|
|
When running an XDP bpf_prog on the remote CPU in cpumap code
then we must disable the direct return optimization that
xdp_return can perform for mem_type page_pool. This optimization
assumes code is still executing under RX-NAPI of the original
receiving CPU, which isn't true on this remote CPU.
The cpumap code already disabled this via helpers
xdp_set_return_frame_no_direct() and xdp_clear_return_frame_no_direct(),
but the scope didn't include xdp_do_flush().
When doing XDP_REDIRECT towards e.g devmap this causes the
function bq_xmit_all() to run with direct return optimization
enabled. This can lead to hard to find bugs. The issue
only happens when bq_xmit_all() cannot ndo_xdp_xmit all
frames and them frees them via xdp_return_frame_rx_napi().
Fix by expanding scope to include xdp_do_flush(). This was found
by Dragos Tatulea.
Fixes: 11941f8a8536 ("bpf: cpumap: Implement generic cpumap")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Reported-by: Chris Arges <carges@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Chris Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/175519587755.3008742.1088294435150406835.stgit@firesoul
|
|
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add PCI ID to support Intel Wildcat Lake, same as MTL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250812130259.109645-1-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_drm_bridge_alloc() returns ERR_PTR on failure instead of a
NULL pointer, so use IS_ERR() to check the returned pointer.
While at it, on failure, return ERR_CAST(dp) instead of
ERR_PTR(-ENOMEM) in order not to depend on devm_drm_bridge_alloc()
error code implementation.
Fixes: 48f05c3b4b70 ("drm/bridge: analogix_dp: Use devm_drm_bridge_alloc() API")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250806095224.527938-1-victor.liu@nxp.com
|
|
struct mempool doesn't currently exist, and thus also isn't used in
fnic.h, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250812082808.371119-1-hch@lst.de
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"This fixes a potential call to schedule() within an RCU read-side
critical section. The solution applies reference counting to ensure
that handlers which may call schedule() are invoked safely outside of
the critical section"
* tag 'firewire-fixes-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: reallocate buffer for FCP address handlers when more than 4 are registered
firewire: core: call FCP address handlers outside RCU read-side critical section
firewire: core: call handler for exclusive regions outside RCU read-side critical section
firewire: core: use reference counting to invoke address handlers safely
|
|
make clean does not check the kernel config when removing files. As
such, additions to clean-files under CONFIG_ARM or CONFIG_ARM64 are not
evaluated. For example, when building on arm64, this means that
lib/crypto/arm64/sha{256,512}-core.S are left over after make clean.
Set clean-files unconditionally to ensure that make clean removes these
files.
Fixes: e96cb9507f2d ("lib/crypto: sha256: Consolidate into single module")
Fixes: 24c91b62ac50 ("lib/crypto: arm/sha512: Migrate optimized SHA-512 code to library")
Fixes: 60e3f1e9b7a5 ("lib/crypto: arm64/sha512: Migrate optimized SHA-512 code to library")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Link: https://lore.kernel.org/r/20250814-crypto_clean-v2-1-659a2dc86302@columbia.edu
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Update the help text for CRYPTO_LIB_SHA1 and CRYPTO_LIB_SHA256 to
reflect the addition of HMAC support, and to be consistent with
CRYPTO_LIB_SHA512.
Link: https://lore.kernel.org/r/20250731224218.137947-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The CRC error bit is located at bit 17 in the Rx descriptor, but the
driver was incorrectly using bit 16. Fix it.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20250813071631.7566-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests to ensure proper backlog accounting in hhf, codel, pie, fq,
fq_pie, and fq_codel qdiscs. We check for the bug pattern originally
found in fq, fq_pie, and fq_codel, which was an underflow in the tbf
parent backlog stats upon child qdisc removal.
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235808.45281-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:
When the tbf parent runs out of tokens, skbs of these qdiscs will
be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
which accounts for both qlen and backlog. However, in the case of
qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
from gso_skb. This means that these qdiscs are missing a
qdisc_qstats_backlog_dec when dropping packets to satisfy the
new limit in their change handlers.
One can observe this issue with the following (with tc patched to
support a limit of 0):
export TARGET=fq
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
echo ''; echo 'add child'; tc -s -d qdisc show dev lo
ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
tc qdisc replace dev lo handle 2: parent 1:1 sfq
echo ''; echo 'post graft'; tc -s -d qdisc show dev lo
The second to last show command shows 0 packets but a positive
number (74) of backlog bytes. The problem becomes clearer in the
last show command, where qdisc_purge_queue triggers
qdisc_tree_reduce_backlog with the positive backlog and causes an
underflow in the tbf parent's backlog (4096 Mb instead of 0).
To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.
The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs.
Fixes: 2d3cbfd6d54a ("net_sched: Flush gso_skb list too during ->change()")
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235725.45243-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When set multicast_query_interval to a large value, the local variable
'time' in br_multicast_send_query() may overflow. If the time is smaller
than jiffies, the timer will expire immediately, and then call mod_timer()
again, which creates a loop and may trigger the following soft lockup
issue.
watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66]
CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none)
Call Trace:
<IRQ>
__netdev_alloc_skb+0x2e/0x3a0
br_ip6_multicast_alloc_query+0x212/0x1b70
__br_multicast_send_query+0x376/0xac0
br_multicast_send_query+0x299/0x510
br_multicast_query_expired.constprop.0+0x16d/0x1b0
call_timer_fn+0x3b/0x2a0
__run_timers+0x619/0x950
run_timer_softirq+0x11c/0x220
handle_softirqs+0x18e/0x560
__irq_exit_rcu+0x158/0x1a0
sysvec_apic_timer_interrupt+0x76/0x90
</IRQ>
This issue can be reproduced with:
ip link add br0 type bridge
echo 1 > /sys/class/net/br0/bridge/multicast_querier
echo 0xffffffffffffffff >
/sys/class/net/br0/bridge/multicast_query_interval
ip link set dev br0 up
The multicast_startup_query_interval can also cause this issue. Similar to
the commit 99b40610956a ("net: bridge: mcast: add and enforce query
interval minimum"), add check for the query interval maximum to fix this
issue.
Link: https://lore.kernel.org/netdev/20250806094941.1285944-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250812091818.542238-1-wangliang74@huawei.com/
Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250813021054.1643649-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Submit multiple descriptors in axienet_rx_cb() to fill Rx skb ring. This
ensures the ring "catches up" on previously missed allocations.
Increment Rx skb ring head pointer after BD is successfully allocated.
Previously, head pointer was incremented before verifying if descriptor is
successfully allocated and has valid entries, which could lead to ring
state inconsistency if descriptor setup failed.
These changes improve reliability by maintaining adequate descriptor
availability and ensuring proper ring buffer state management.
Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20250813135559.1555652-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove Thorsten Winkler as maintainer and add Aswin Karuvally as reviewer.
Thank you Thorsten for your support, welcome Aswin!
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Thorsten Winkler <twinkler@linux.ibm.com>
Acked-by: Aswin Karuvally <aswin@linux.ibm.com>
Link: https://patch.msgid.link/20250813111633.241111-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Some more xe_migrate_access_memory fixes (Auld)
- Defer buffer object shrinker write-backs and GPU waits (Thomas)
- HWMON fix for clamping limits (Karthik)
- SRIOV-PF: Set VF LMEM BAR size (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aJ4MIZQurSo0uNxn@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix the implementation of wa_18038517565 [fbc] (Vinod Govindapillai)
- Do not trigger Frame Change events from frontbuffer flush [psr] (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://lore.kernel.org/r/aJ0HAh06VHWVdv63@linux
|
|
Cross-thread attacks are generally harder as they require the victim to be
co-located on a core. However, with VMSCAPE the adversary targets belong to
the same guest execution, that are more likely to get co-located. In
particular, a thread that is currently executing userspace hypervisor
(after the IBPB) may still be targeted by a guest execution from a sibling
thread.
Issue a warning about the potential risk, except when:
- SMT is disabled
- STIBP is enabled system-wide
- Intel eIBRS is enabled (which implies STIBP protection)
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
cpu_bugs_smt_update() uses global variables from different mitigations. For
SMT updates it can't currently use vmscape_mitigation that is defined after
it.
Since cpu_bugs_smt_update() depends on many other mitigations, move it
after all mitigations are defined. With that, it can use vmscape_mitigation
in a moment.
No functional change.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
Enable the previously added mitigation for VMscape. Add the cmdline
vmscape={off|ibpb|force} and sysfs reporting.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
VMSCAPE is a vulnerability that exploits insufficient branch predictor
isolation between a guest and a userspace hypervisor (like QEMU). Existing
mitigations already protect kernel/KVM from a malicious guest. Userspace
can additionally be protected by flushing the branch predictors after a
VMexit.
Since it is the userspace that consumes the poisoned branch predictors,
conditionally issue an IBPB after a VMexit and before returning to
userspace. Workloads that frequently switch between hypervisor and
userspace will incur the most overhead from the new IBPB.
This new IBPB is not integrated with the existing IBPB sites. For
instance, a task can use the existing speculation control prctl() to
get an IBPB at context switch time. With this implementation, the
IBPB is doubled up: one at context switch and another before running
userspace.
The intent is to integrate and optimize these cases post-embargo.
[ dhansen: elaborate on suboptimal IBPB solution ]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
|
|
The VMSCAPE vulnerability may allow a guest to cause Branch Target
Injection (BTI) in userspace hypervisors.
Kernels (both host and guest) have existing defenses against direct BTI
attacks from guests. There are also inter-process BTI mitigations which
prevent processes from attacking each other. However, the threat in this
case is to a userspace hypervisor within the same process as the attacker.
Userspace hypervisors have access to their own sensitive data like disk
encryption keys and also typically have access to all guest data. This
means guest userspace may use the hypervisor as a confused deputy to attack
sensitive guest kernel data. There are no existing mitigations for these
attacks.
Introduce X86_BUG_VMSCAPE for this vulnerability and set it on affected
Intel and AMD CPUs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
VMSCAPE is a vulnerability that may allow a guest to influence the branch
prediction in host userspace, particularly affecting hypervisors like QEMU.
Add the documentation.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These restore corner case behavior of the EC driver related to the
handling of defective ACPI tables and fix a recent regression in the
ACPI processor driver:
- Prevent the ACPI EC driver from ignoring ECDT information in the
cases when the ID string in the ECDT is invalid, but not empty, to
fix thouchpad detection on ThinkBook 14 G7 IML (Armin Wolf)
- Rearrange checks in acpi_processor_ppc_init() to restore the
handling of frequency QoS requests related to _PPC limits
inadvertently broken by a recent update (Rafael Wysocki)"
* tag 'acpi-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Relax sanity check of the ECDT ID string
ACPI: processor: perflib: Move problematic pr->performance check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These remove an artificial limitation from the intel_idle driver,
update the menu cpuidle governor to restore its previous behavior in a
corner case and add one more supported platform configuration to the
intel_pstate driver:
- Allow intel_idle to use _CST information from ACPI tables for idle
states enumeration on any family of processors (Len Brown)
- Restore corner case behavior of the menu cpuidle governor, related
to the handling of systems where idle states selected by the
governor are rejected by the cpuidle driver, inadvertently changed
during the 6.15 development cycle (Rafael Wysocki)
- Add support for Clearwater Forest in the out-of-band (OOB) mode to
the intel_pstate driver (Srinivas Pandruvada)"
* tag 'pm-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
|
|
LMEM is partitioned between multiple VFs and we expect that the more
VFs we have, the less LMEM is assigned to each VF.
This means that we can achieve full LMEM BAR access without the need to
attempt full VF LMEM BAR resize via pci_resize_resource().
Always try to set the largest possible BAR size that allows to fit the
number of enabled VFs and inform the user in case the resize attempt is
not successful.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250527120637.665506-7-michal.winiarski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 32a4d1b98e6663101fd0abfaf151c48feea7abb1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
|
|
Since commit c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain
pre-enable and post-disable"), the bridge pre_enable callbacks are now
called before crtc enable, and the bridge post_disable callbacks after
the crtc disable.
In the mediatek-drm driver, this change leads to transfer errors on
mtk_dsi_host_transfer callback processing during the panel bridge
pre-enable sequence because the DSI host bridge pre_enable and CRTC
enable sequences, that are enabling the required clocks and PHY using
mtk_dsi_poweron function, are called after.
So, in order to fix this call order issue, request the DSI host bridge
be pre-enabled before panel bridge by setting pre_enable_prev_first
flag on DSI device bridge in the mtk_dsi_host_attach function.
Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250701-mediatek-drm-fix-dsi-panel-init-v1-1-7af4adb9fdeb@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
* acpi-ec:
ACPI: EC: Relax sanity check of the ECDT ID string
* acpi-processor:
ACPI: processor: perflib: Move problematic pr->performance check
|
|
* pm-cpuidle:
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
* pm-cpufreq:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
|
|
There are two compatible strings defined in "8250.yaml" that require
two clocks to be specified, along with their names:
- "spacemit,k1-uart", used in "spacemit/k1.dtsi"
- "nxp,lpc1850-uart", used in "lpc/lpc18xx.dtsi"
When only one clock is used, the name is not required. However there
are two places that do specify a name:
- In "mediatek/mt7623.dtsi", the clock for the "mediatek,mtk-btif"
compatible serial device is named "main"
- In "qca/ar9132.dtsi", the clock for the "ns8250" compatible
serial device is named "uart"
In commit d2db0d7815444 ("dt-bindings: serial: 8250: allow clock
'uartclk' and 'reg' for nxp,lpc1850-uart"), Frank Li added the
restriction that two named clocks be used for the NXP platform
mentioned above.
Change that logic, so that an additional condition for (only) the
SpacemiT platform similarly restricts the two clocks to have the
names "core" and "bus".
Finally, add "main" and "uart" as allowed names when a single clock is
specified.
Fixes: 2c0594f9f0629 ("dt-bindings: serial: 8250: support an optional second clock")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507160314.wrC51lXX-lkp@intel.com/
Signed-off-by: Alex Elder <elder@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250813031338.2328392-1-elder@riscstar.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A block that required a "spacemit,k1-uart" compatible node to
specify two clocks was placed in the wrong spot in the binding.
Conor Dooley pointed out it belongs earlier in the file, as part
of the initial "allOf".
Fixes: 2c0594f9f0629 ("dt-bindings: serial: 8250: support an optional second clock")
Cc: stable <stable@kernel.org>
Reported-by: Conor Dooley <conor@kernel.org>
Closes: https://lore.kernel.org/lkml/20250729-reshuffle-contented-e6def76b540b@spud/
Signed-off-by: Alex Elder <elder@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250813032151.2330616-1-elder@riscstar.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Lists should have fixed constraints, because binding must be specific in
respect to hardware, thus add missing constraints to number of clocks.
Cc: stable <stable@kernel.org>
Fixes: 88a499cd70d4 ("dt-bindings: Add support for the Broadcom UART driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250812121630.67072-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|