summaryrefslogtreecommitdiff
path: root/Documentation/ABI
AgeCommit message (Collapse)Author
2017-02-27Merge tag 'rtc-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - constify rtc_class_ops structures New driver: - STM32 Drivers: - armada38x: fix errata, Armada 7K/8K support - ds3232: fix wakeup support - gemini: DT support - m48t86: huge cleanup and platform_data removal - mcp795: alarm support - sun6i: proper oscillator handling - tegra: proper clock handling - tps65910: calibration support" * tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits) rtc: ds3232: Call device_init_wakeup before device_register rtc: pcf2127: bulk read only date and time registers. rtc: armada38x: Add support for Armada 7K/8K rtc: armada38x: Prepare driver to manage different versions rtc: ds3232: Add regmap max_register definition. rtc: ds3232: Cleanup whitespace around register and bit definitions. rtc: m48t86: remove unused platform_data ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources ARM: Orion5x: ts78xx: remove RTC detection ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources rtc: m48t86: verify that the RTC is actually present rtc: m48t86: add NVRAM support rtc: m48t86: allow driver to manage its resources rtc: m48t86: shorten register name defines bindings: rtc: correct wrong reference in required properties rtc: sun6i: Fix return value check in sun6i_rtc_clk_init() rtc: sun6i: extend test coverage rtc: sun6i: Fix compatibility with old DT binding rtc: snvs: add a missing write sync rtc: bq32000: add support to enable disable the trickle charge FET bypass ...
2017-02-23Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "First set of updates for 4.11 kernel merge window - Add new Broadcom bnxt_re RoCE driver - rxe driver updates - ioctl cleanups - ETH_P_IBOE declaration cleanup - IPoIB changes - Add port state cache - Allow srpt driver to accept guids as port names in config - Update to hfi1 driver - Update to srp driver - Lots of misc minor changes all over" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (114 commits) RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0." rdma_cm: fail iwarp accepts w/o connection params IB/srp: Drain the send queue before destroying a QP IB/core: Add support for draining IB_POLL_DIRECT completion queues IB/srp: Improve an error path IB/srp: Make a diagnostic message more informative IB/srp: Document locking conventions IB/srp: Fix race conditions related to task management IB/srp: Avoid that duplicate responses trigger a kernel bug IB/SRP: Avoid using IB_MR_TYPE_SG_GAPS RDMA/qedr: Fix some error handling RDMA/bnxt_re: add DCB dependency IB/hns: include linux/module.h IB/vmw_pvrdma: Expose vendor error to ULPs vmw_pvrdma: switch to pci_alloc_irq_vectors IB/hfi1: use size_t for passing array length IB/ipoib: Remove redudant label IB/ipoib: remove the unnecessary memory free IB/mthca: switch to pci_alloc_irq_vectors IB/hfi1: Code reuse with memdup_copy ...
2017-02-22zram: remove obsolete sysfs attrsSergey Senozhatsky
We had a deprecated_attr_warn() warning for 2 years and now the time has come and we finally can do the cleanup. The plan was as follows: : per-stat sysfs attributes are considered to be deprecated. : The basic strategy is: : -- the existing RW nodes will be downgraded to WO nodes (in linux 4.11) : -- deprecated RO sysfs nodes will eventually be removed (in linux 4.11) : : The list of deprecated attributes can be found here: : Documentation/ABI/obsolete/sysfs-block-zram : : Basically, every attribute that has its own read accessible sysfs : node (e.g. num_reads) *AND* is accessible via one of the stat files : (zram<id>/stat or zram<id>/io_stat or zram<id>/mm_stat) is considered : to be deprecated. The patch also removes `obsolete/sysfs-block-zram', clean ups `testing/sysfs-block-zram' and tweaks zram.txt files. Link: http://lkml.kernel.org/r/20170118035838.11090-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22Merge tag 'staging-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio driver updates from Greg KH: "Here is the big staging and iio driver patchsets for 4.11-rc1. We almost broke even this time around, with only a few thousand lines added overall, as we removed the old and obsolete i4l code, but added some new drivers for the RPi platform, as well as adding some new IIO drivers. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (669 commits) Staging: vc04_services: Fix the "space prohibited" code style errors Staging: vc04_services: Fix the "wrong indent" code style errors staging: octeon: Use net_device_stats from struct net_device Staging: rtl8192u: ieee80211: ieee80211.h - style fix Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix Staging: rtl8192u: r8192U.h - style fix Staging: rtl8192u: r8192U_core.c - style fix Staging: rtl8192u: r819xU_cmdpkt.c - style fix staging: rtl8192u: blank lines aren't necessary before a close brace '}' staging: rtl8192u: Adding space after enum and struct definition staging: rtl8192u: Adding space after struct definition Staging: ks7010: Add required and preferred spaces around operators Staging: ks7010: ks*: Remove redundant blank lines Staging: ks7010: ks*: Add missing blank lines after declarations staging: visorbus, replace init_timer with setup_timer staging: vt6656: rxtx.c Removed multiple dereferencing staging: vt6656: Alignment match open parenthesis ...
2017-02-21Merge tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time we fairly boring and bit small update. - Support for Intel iDMA 32-bit hardware - deprecate broken support for channel switching in async_tx - bunch of updates on stm32-dma - Cyclic support for zx dma and making in generic zx dma driver - Small updates to bunch of other drivers" * tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) async_tx: deprecate broken support for channel switching dmaengine: rcar-dmac: Widen DMA mask to 40 bits dmaengine: sun6i: allow build on ARM64 platforms (sun50i) dmaengine: Provide a wrapper for memcpy operations dmaengine: zx: fix build warning dmaengine: dw: we do support Merrifield SoC in PCI mode dmaengine: dw: add support of iDMA 32-bit hardware dmaengine: dw: introduce register mappings for iDMA 32-bit dmaengine: dw: introduce block2bytes() and bytes2block() dmaengine: dw: extract dwc_chan_pause() for future use dmaengine: dw: replace convert_burst() with one liner dmaengine: dw: register IRQ and DMA pool with instance ID dmaengine: dw: Fix data corruption in large device to memory transfers dmaengine: ste_dma40: indicate granularity on channels dmaengine: ste_dma40: indicate directions on channels dmaengine: stm32-dma: Add error messages if xlate fails dmaengine: dw: pci: remove LPE Audio DMA ID dmaengine: stm32-dma: Add max_burst support dmaengine: stm32-dma: Add synchronization support dmaengine: stm32-dma: Fix residue computation issue in cyclic mode ...
2017-02-21Merge tag 'media/v4.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
2017-02-20Merge tag 'pm-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The majority of changes go into the Operating Performance Points (OPP) framework and cpufreq this time, followed by devfreq and some scattered updates all over. The OPP changes are mostly related to switching over from RCU-based synchronization, that turned out to be overly complicated and problematic, to reference counting using krefs. In the cpufreq land there are core cleanups, documentation updates, a new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI SoCs that require special handling, ARM64 SoCs support for the qoriq driver, intel_pstate updates, powernv driver update and assorted fixes. The devfreq changes are mostly fixes related to the sysfs interface and some Exynos drivers updates. Apart from that, the cpuidle menu governor will support per-CPU PM QoS constraints for the wakeup latency now, some bugs in the wakeup IRQs framework are fixed, the generic power domains framework should handle asynchronous invocations of *noirq suspend/resume callbacks from now on, the analyze_suspend.py script is updated and there is a new tool for intel_pstate diagnostics. Specifics: - Operating Performance Points (OPP) framework fixes, cleanups and switch over from RCU-based synchronization to reference counting using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach) - cpufreq core cleanups and documentation updates (Viresh Kumar, Rafael Wysocki) - New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer) - New cpufreq-dt sub-driver for TI SoCs requiring special handling, like in the AM335x, AM437x, DRA7x, and AM57x families, along with new DT bindings for it (Dave Gerlach, Paul Gortmaker) - ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian) - intel_pstate driver updates including a new sysfs knob to control the driver's operation mode and fixes related to the no_turbo sysfs knob and the hardware-managed P-states feature support (Rafael Wysocki, Srinivas Pandruvada) - New interface to export ultra-turbo frequencies for the powernv cpufreq driver (Shilpasri Bhat) - Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter, Wei Yongjun) - devfreq core fixes, mostly related to the sysfs interface exported by it (Chanwoo Choi, Chris Diamand) - Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo Choi) - Device PM QoS extension to support CPUs and support for per-CPU wakeup (device resume) latency constraints in the cpuidle menu governor (Alex Shi) - Wakeup IRQs framework fixes (Grygorii Strashko) - Generic power domains framework update including a fix to make it handle asynchronous invocations of *noirq suspend/resume callbacks correctly (Ulf Hansson, Geert Uytterhoeven) - Assorted fixes and cleanups in the core suspend/hibernate code, PM QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers) - Update of the analyze_suspend.py script is updated to version 4.5 offering multiple improvements (Todd Brandt) - New tool for intel_pstate diagnostics using the pstate_sample tracepoint (Doug Smythies)" * tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits) MAINTAINERS: cpufreq: add bmips-cpufreq.c PM / QoS: Fix memory leak on resume_latency.notifiers PM / Documentation: Spelling s/wrtie/write/ PM / sleep: Fix test_suspend after sleep state rework cpufreq: CPPC: add ACPI_PROCESSOR dependency cpufreq: make ti-cpufreq explicitly non-modular cpufreq: Do not clear real_cpus mask on policy init tools/power/x86: Debug utility for intel_pstate driver AnalyzeSuspend: fix drag and zoom bug in javascript PM / wakeirq: report a wakeup_event on dedicated wekup irq PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs PM / wakeirq: Enable dedicated wakeirq for suspend cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime Documentation: dt: add bindings for ti-cpufreq PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API cpufreq: qoriq: Don't look at clock implementation details cpufreq: qoriq: add ARM64 SoCs support PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata() ...
2017-02-20Merge tag 'leds_for_4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New features and improvements: - add new optional brightness_hw_changed attribute for the LEDs that may have their brightness level changed autonomously (outside of kernel control) by hardware / firmware. The attribute supports userspace notifications through POLLPRI events - add led_brightness_hw_mon tool that demonstrates how to use the aforementioned feature - add LED_ON enum for LEDs that can be only turned on/off, and don't allow setting other brightness levels - allow for adjusting heartbeat trigger blink brightness level Fixes and cleanups: - avoid harmless maybe-uninitialized warning in leds-ktd2692.c - add context to the existing example entries in common LED bindings to make the documentation more clear" * tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: ledtrig-heartbeat: Make top brightness adjustable tools/leds: Add led_hw_brightness_mon program leds: class: Add new optional brightness_hw_changed attribute leds: ktd2692: avoid harmless maybe-uninitialized warning leds: add LED_ON brightness as boolean value DT: leds: Improve examples by adding some context
2017-02-20Merge tag 'iommu-updates-v4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU UPDATES from Joerg Roedel: - KVM PCIe/MSI passthrough support on ARM/ARM64 - introduction of a core representation for individual hardware iommus - support for IOMMU privileged mappings as supported by some ARM IOMMUS - 16-bit SID support for ARM-SMMUv2 - stream table optimization for ARM-SMMUv3 - various fixes and other small improvements * tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (61 commits) vfio/type1: Fix error return code in vfio_iommu_type1_attach_group() iommu: Remove iommu_register_instance interface iommu/exynos: Make use of iommu_device_register interface iommu/mediatek: Make use of iommu_device_register interface iommu/msm: Make use of iommu_device_register interface iommu/arm-smmu: Make use of the iommu_register interface iommu: Add iommu_device_set_fwnode() interface iommu: Make iommu_device_link/unlink take a struct iommu_device iommu: Add sysfs bindings for struct iommu_device iommu: Introduce new 'struct iommu_device' iommu: Rename struct iommu_device iommu: Rename iommu_get_instance() iommu: Fix static checker warning in iommu_insert_device_resv_regions iommu: Avoid unnecessary assignment of dev->iommu_fwspec iommu/mediatek: Remove bogus 'select' statements iommu/dma: Remove bogus dma_supported() implementation iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address space iommu/vt-d: Don't over-free page table directories iommu/vt-d: Tylersburg isoch identity map check is done too late. iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu ...
2017-02-20Merge tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: - Make amd64_edac still load on a machine with unpopulated nodes + cleanups (Yazen Ghannam) - Expose per-DIMM error counts in sysfs (Aaron Miller) - Add T2080 l2-cache support to mpc85xx (Chris Packham) - Random other small improvements/cleanups/fixlets * tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, mce_amd: Print IPID and Syndrome on a separate line EDAC, amd64: Bump driver version MAINTAINERS, EDAC: Update email for Thor Thayer EDAC, fsl_ddr: Make locally used symbols static EDAC, mpc85xx: Add T2080 l2-cache support EDAC, amd64: Add x86cpuid sanity check during init EDAC, amd64: Don't treat ECC disabled as failure EDAC: Add routine to check if MC devices list is empty EDAC, amd64: Remove unused printing macros EDAC, amd64: Rework messages in ecc_enabled() EDAC, amd64: Move global code out of instance functions EDAC, amd64: Free unused memory when init_one_instance() fails EDAC, mce_amd: Give more context to deferred error message EDAC, i7300: Test for the second channel properly EDAC, sb_edac: Get rid of ->show_interleave_mode() EDAC: Expose per-DIMM error counts in sysfs EDAC, amd64: Save and return err code from probe_one_instance() EDAC, i82975x: Add ioremap_nocache() error handling EDAC: Fix typos in enum mem_type comments EDAC: Make dev_attr_sdram_scrub_rate static
2017-02-15IB/cma: Add default RoCE TOS to CMA configfsMajd Dibbiny
Add new entry to the RDMA-CM configfs that allows users to select default TOS for RDMA-CM QPs. This is useful for users that want to control the TOS for legacy applications without changing their code. Application that sets the TOS explicitly using the rdma_set_option API will continue to work as expected, meaning overriding the configfs value. CC: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-06Merge 4.10-rc7 into staging-nextGreg Kroah-Hartman
This resolves the merge errors that were reported in linux-next and it picks up the staging and IIO fixes that we need/want in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-01rtc: bq32000: add support to enable disable the trickle charge FET bypassEnric Balletbo i Serra
The bq32000 includes a trickle charge circuit to maintain the charge of the backup supply when a super capacitor is used. You can enable the charging circuit by setting 'trickle-resistor-ohms', additionally you can set TCFE to 1 to bypass the internal diode and boost the charge voltage of the backup supply. You might want to enable/disable the TCFE switch from userspace (e.g when device is only connected to a battery) This patch introduces a new sysfs entry to enable and disable this FET form userspace. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-31PM / devfreq: Simplify the sysfs name of devfreq-event deviceChanwoo Choi
This patch just removes '.' character from the sysfs name of devfreq-event device as following. Usually, the subsystem uses the similiar naming style such as {framework name}{Number}. - old : /sys/class/devfreq-event/event.(X) - new : /sys/class/devfreq-event/event(X) And this patch initializes the value of 'event_no' with -1 in order to remove the unneeded operation (-1) when calling the atomic_inc_return(&event_no). Lastly, this patch adds the ABI document for devfreq-event class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-30Merge branch 'iommu/guest-msi' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/core
2017-01-30[media] rc: change wakeup_protocols to list all protocol variantsSean Young
For IR wakeup, a driver has to program the hardware to wakeup at a specific IR sequence, so it makes no sense to allow multiple wakeup protocols to be selected. In the same manner the sysfs interface only allows one scancode to be provided. In addition, we need to know the specific variant of the protocol. In short, these changes are made to the wakeup_protocols sysfs entry: - list all the protocol variants rather than the protocol groups, e.g. "nec nec-x nec-32" rather than just "nec". - only allow one protocol variant to be selected rather than multiple - wakeup_filter can only be set once a protocol has been selected in wakeup_protocols. This is an API change, however the only user of this API is the img-ir, but the wakeup code was never merged to mainline, so it was never used. Signed-off-by: Sean Young <sean@mess.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Sifan Naeem <sifan.naeem@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-29leds: class: Add new optional brightness_hw_changed attributeHans de Goede
Some LEDs may have their brightness level changed autonomously (outside of kernel control) by hardware / firmware. This commit adds support for an optional brightness_hw_changed attribute to signal such changes to userspace (if a driver can detect them): What: /sys/class/leds/<led>/brightness_hw_changed Date: January 2017 KernelVersion: 4.11 Description: Last hardware set brightness level for this LED. Some LEDs may be changed autonomously by hardware/firmware. Only LEDs where this happens and the driver can detect this, will have this file. This file supports poll() to detect when the hardware changes the brightness. Reading this file will return the last brightness level set by the hardware, this may be different from the current brightness. Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to their flags field and call led_classdev_notify_brightness_hw_changed() with the hardware set brightness when they detect a hardware / firmware triggered brightness change. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-01-28iio: adc: stm32: add trigger polarity extended attributeFabrice Gasnier
Define extended attribute so that user may choose rising, falling or both edges for external trigger sources. Default to rising edge in case it isn't set. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-28Merge tag 'ib-mfd-iio-pwm-4.11' into testJonathan Cameron
Immutable branch between MFD, IIO and PWM due for the v4.11 merge window Pulled into IIO to allow follow up series of triggered capture for the STM32 ADCs.
2017-01-28iio: distance: srf08: add driver ABI documentationAndreas Klinger
Add sysfs-bus-iio-distance-srf08 for individual attributes of the driver, especially: - sensitivity which the device documentation calls gain for amplifying the signal - max_range for limiting the maximum distance for expected echos and therefore limiting the time waiting for telegrams Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-25iio: Add STM32 timer trigger driverBenjamin Gaignard
Timers IPs can be used to generate triggers for other IPs like DAC or ADC. Each trigger may result of timer internals signals like counter enable, reset or edge, this configuration could be done through "master_mode" device attribute. Since triggers could be used by DAC or ADC their names are defined in include/ nux/iio/timer/stm32-timer-trigger.h and is_stm32_iio_timer_trigger function could be used to check if the trigger is valid or not. "trgo" trigger have a "sampling_frequency" attribute which allow to configure timer sampling frequency. version 8: - change kernel version from 4.10 to 4.11 in ABI documentation version 7: - remove all iio_device related code - move driver into trigger directory version 5: - simplify tables of triggers - only create an IIO device when needed version 4: - get triggers configuration from "reg" in DT - add tables of triggers - sampling frequency is enable/disable when writing in trigger sampling_frequency attribute - no more use of interruptions version 3: - change compatible to "st,stm32-timer-trigger" - fix attributes access right - use string instead of int for master_mode and slave_mode - document device attributes in sysfs-bus-iio-timer-stm32 version 2: - keep only one compatible - use st,input-triggers-names and st,output-triggers-names to know which triggers are accepted and/or create by the device Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-23iommu: Implement reserved_regions iommu-group sysfs fileEric Auger
A new iommu-group sysfs attribute file is introduced. It contains the list of reserved regions for the iommu-group. Each reserved region is described on a separate line: - first field is the start IOVA address, - second is the end IOVA address, - third is the type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-23Merge tag 'iio-for-4.11b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-next Jonathan writes: Second round of IIO new device support, cleanups and features for the 4.11 cycle New device support: * lsm6dsx imu - new driver and bindings. * max11100 adc - new driver and bindings. * tlc4541 - new driver * tmp007 thermopile - new driver. Core * in kernel interfaces - pass through raw values if no scaling provided and a processed value is requested. * trigger - close a race condition in acquiring trigger reference. - constify device_type structures. - rework the viio_trigger_alloc function to be much neater and easier to read. - free trigger resources correctly on some error paths. Avoids putting a module we don't have. Documentation * ABI - specify a unit for proximity measurements. Cleanups and features * ads1015 - constify iio_info structure. * ads7950 cleanups following merge in previous pull - Add device tree bindings - Drop the ti prefix from the module name in common with other drivers. - Change regulator name to vref to match datasheet and other drivers. * ak8974 - remove a redundant zero timeout check. * bmi160 - use variable names for sizeof instead of types. * cm3605 - mark PM functions as __maybe_unused to avoid a build warning. * isl29028 (on it's way towards moving out of staging). - alignment fixes and newline improvements. - combine proxim_get and read_proxim for simpler code. - drop unused ISL29028_DEV_ATTR macro - move some error logging into functions to cut out repitition. - make error messages more consistent. - tidy up some brackets. - drop the enable flag that nothing uses. - only set proximity rate and ALS scale when relevant channel type is enabled. - runtime pm support. * lsm6dsx - fix wrong values for gyro sensitivitiy. * mag3110 - claim direct mode during sysfs reads to avoid a race condition. * max1363 - export OF device table IDs as module aliases. * max30100 - use msleep for long uncritical delays. * mcp4531 - export OF device table as module aliases. * ms5611 - claim direct mode during sysfs reads to avoid a race condition. * opt3001 - export OF device table as module aliases. * sx9500 - claim direct mode during oversampling changes to avoid a race condition.
2017-01-19Merge tag 'iio-for-4.11a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new device support, features and cleanups for IIO in the 4.11 cycle. It's shaping to be another fairly busy cycle. Lots more on the way! New device support * ads7950 - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954, ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs. * cm3605 - New driver for this light sensor and proximity sensor which is an analog part with some additional digital controls. * hx711 - New driver. Core new stuff * Gravity sensor type. This is a processed datastream in which the device will try to work out which way is down. * Split the buffer.h file into two parts. One provides the interface to 'use' a buffer, the second provides the internals of the buffer functionality as needed by implementations of buffers. - Move documentation inline so as to allow use of private: tag when generating documentation. - Add some utility functions for the few things that are directly done with the buffers. - Stop exporting functions that no-one uses outside of the core code. - Push docs down by the code in the c file where they should have always been. - Fix typo in kernel-doc for buffer. - push down some includes that were previously happening implicitly. - stop enabling the timestamp of the dummy device. Features and cleanups * ad5592r - ACPI support * ad5593r -ACPI support. * ad5933 - Fix a false comment about size of a particular register. * ad7150 - replace S_IRUGO | S_IWUSR with 0644. I'm not that keen on these patches in general, but as it was nicely presented I took this one anyway. As a general rule will only take these as part of a larger driver cleanup. - don't eat an error but rather reutnr it in the write_event_config callback. * ad7606 - replace non standard range attibute with _scale * ade7753 - use usleep_range for short sleeps * ade7754 - use usleep_range for short sleeps * ade7758 - use usleep_range for short sleeps * ade7759 - use usleep_range for short sleeps * ade7854 - use usleep_range for short sleeps * adis16201 - fix description * adis16203 - fix description - fix copyright year * adis16209 - fix description * adt7316 - Add braces to arms of if else statement (for consistency) - Alignment fixes. * axp288 - Fix up an issue with accidental overwrites of data. * bmi160 - add deivce tables for i2c and spi to support correctly identifying the full dt name (including manufacturer). - device tree binding. * bmp280 - use usleep_range for short sleeps. * cm3232 - return error from cm3232_reg_init rather than eating it if the last write fails. * dummy driver - remove a semicolor found at end of a function defintition. * exynos-adc - use usleep_range for short sleeps. * hid-sensor (accel) - Add timestamp support. The hardware can provide timestamps so lets support them. If not fall back to timestamps estimated in kernel. * hid-sensor (light) - Add a duplicate ID for the light channels so as to keep existing interface whilst also using the more standard IIO interface. * hts221 - acpi probing * imx25-gcq - Add a macro call to allow this driver to be automatically loaded. * isl29028 - reorganise code to avoid deep nesting of if statements. - move chip test and default regs into a function suitable or sharing with power management code. - tidy up some code alignment. * lidar-lite-v3 - introduce compatible strings that make it clear Garmin have consideral friends. * mma8452 - avoid returning signed value when unsigned is appropriate * spmi-vadc - Update function for generic voltage conversion to take into account that different channels on this device should be handled differently. - Rework code to allow per channel voltage scaling and support the standard options for this hardware. - Fixup three minor issues with the above patches for this part. These all effect test builds rather than the native builds for the part, but good to clean them up anyway. * st_sensors - support device matching from the ACPI DST tables. - acpi based probing for accelerometers - acpi based probing for pressure sensors - Allow pressure sensors to read negative values. - Export sampling frequency for lps25h and lps331ap. - Add support for the old DT bindings from the period when these deivces were often supported through windows. Docs fixup: * typo in sysfs-bus-iio
2017-01-19EDAC: Expose per-DIMM error counts in sysfsAaron Miller
The old csrowX sysfs directories have per-csrow error counters, but the new dimmX directories do not currently expose error counts. EDAC already keeps these counts, add them to sysfs so per-DIMM counts are still available when CONFIG_EDAC_LEGACY_SYSFS=n. Signed-off-by: Aaron Miller <aaronmiller@fb.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20161103220153.3997328-1-aaronmiller@fb.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-01-14Revert "driver core: Add deferred_probe attribute to devices in sysfs"Greg Kroah-Hartman
This reverts commit 6751667a29d6fd64afb9ce30567ad616b68ed789. Rob Herring objected to it, and a replacement for it will be added using debugfs in the future. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-14iio: Documentation: Add proximity unitEnric Balletbo i Serra
To follow iio guidelines Where possible we stick to the raw SI unit, so specify meters for proximity. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-05iio: Add channel for GravitySong Hongyan
Add new channel types support for gravity sensor. Gravity sensor provides an application-level or physical collection that identifies a device that measures exclusively the force of Earth's gravity along any number of axes. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-02dmaengine: qcom_hidma: Wrong domain name in the email addressAmit Kumar
cudeaurora.org is used in place of codeaurora.org in the contact field. Signed-off-by: Amit Kumar <free.amit.kumar@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-30iio: Documentation: fix spelling mistake: "deactived" -> "deactivated"Colin Ian King
trivial fix to spelling mistake in iio documentation Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-22Merge branch 'x86-cache-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache allocation interface from Thomas Gleixner: "This provides support for Intel's Cache Allocation Technology, a cache partitioning mechanism. The interface is odd, but the hardware interface of that CAT stuff is odd as well. We tried hard to come up with an abstraction, but that only allows rather simple partitioning, but no way of sharing and dealing with the per package nature of this mechanism. In the end we decided to expose the allocation bitmaps directly so all combinations of the hardware can be utilized. There are two ways of associating a cache partition: - Task A task can be added to a resource group. It uses the cache partition associated to the group. - CPU All tasks which are not member of a resource group use the group to which the CPU they are running on is associated with. That allows for simple CPU based partitioning schemes. The main expected user sare: - Virtualization so a VM can only trash only the associated part of the cash w/o disturbing others - Real-Time systems to seperate RT and general workloads. - Latency sensitive enterprise workloads - In theory this also can be used to protect against cache side channel attacks" [ Intel RDT is "Resource Director Technology". The interface really is rather odd and very specific, which delayed this pull request while I was thinking about it. The pull request itself came in early during the merge window, I just delayed it until things had calmed down and I had more time. But people tell me they'll use this, and the good news is that it is _so_ specific that it's rather independent of anything else, and no user is going to depend on the interface since it's pretty rare. So if push comes to shove, we can just remove the interface and nothing will break ] * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) x86/intel_rdt: Implement show_options() for resctrlfs x86/intel_rdt: Call intel_rdt_sched_in() with preemption disabled x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount x86/intel_rdt: Fix setting of closid when adding CPUs to a group x86/intel_rdt: Update percpu closid immeditately on CPUs affected by changee x86/intel_rdt: Reset per cpu closids on unmount x86/intel_rdt: Select KERNFS when enabling INTEL_RDT_A x86/intel_rdt: Prevent deadlock against hotplug lock x86/intel_rdt: Protect info directory from removal x86/intel_rdt: Add info files to Documentation x86/intel_rdt: Export the minimum number of set mask bits in sysfs x86/intel_rdt: Propagate error in rdt_mount() properly x86/intel_rdt: Add a missing #include MAINTAINERS: Add maintainer for Intel RDT resource allocation x86/intel_rdt: Add scheduler hook x86/intel_rdt: Add schemata file x86/intel_rdt: Add tasks files x86/intel_rdt: Add cpus file x86/intel_rdt: Add mkdir to resctrl file system x86/intel_rdt: Add "info" files to resctrl file system ...
2016-12-18Merge tag 'rtc-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - non-modular drivers are now explicitly non-modular New driver: - Epson Toyocom rtc-7301sf/dg Drivers: - cmos: reject unsupported alarm values wrt the RTC capabilities - ds1307: ACPI support - jz4740: DT support, jz4780 handling, can now be used as a system power controller - mcp795: many fixes, in particular proper month handling - twl: driver is now DT only" * tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: mcp795: Fix whitespace and indentation. rtc: mcp795: Prefer using the BIT() macro. rtc: mcp795: fix month write resetting date to 1. rtc: mcp795: fix time range difference between linux and RTC chip. rtc: mcp795: fix bitmask value for leap year (LP). rtc: mcp795: use bcd2bin/bin2bcd. rtc: add support for EPSON TOYOCOM RTC-7301SF/DG rtc: ds1307: Add ACPI support rtc: imxdi: (trivial) fix a typo rtc: ds1374: Merge conditional + WARN_ON() rtc: twl: make driver DT only rtc: twl: kill static variables rtc: fix typos in Kconfig rtc: jz4740: make the driver builtin only rtc: jz4740: remove unused EXPORT_SYMBOL Documentation: bindings: fix twl-rtc documentation rtc: Enable compile testing for Maxim and Samsung drivers MIPS: jz4740: Remove obsolete code MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree ...
2016-12-15Merge tag 'pci-v4.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..
2016-12-14Merge tag 'sound-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No dramatic changes are found in this development cycle, but as usual, many commits are applied in a wide range of drivers. Most of big changes are in ASoC, where a few bits of framework work and quite a lot of cleanups and improvements to existing code have been done. The rest are usual stuff, a few HD-audio and USB-audio quirks and fixes, as well as the drop of kthread usages in the whole subsystem. Below are some highlights: ASoC: - support for stereo DAPM controls - some initial work on the of-graph sound card - regmap conversions of the remaining AC'97 drivers - a new version of the topology ABI; this should be backward compatible - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona, Intel skylake, atom-sst - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek RT5665 USB-audio: - yet another race fix at disconnection - tolerated packet size calculation for some Android devices - quirks for Axe-Fx II, QuickCam, TEAC 501/503 HD-audio: - improvement of Dell pin fixup mapping - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic Misc: - replace all kthread usages with simple works" * tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits) ALSA: hiface: Fix M2Tech hiFace driver sampling rate change ALSA: usb-audio: Eliminate noise at the start of DSD playback. ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path ASoC: topology: avoid uninitialized kcontrol_type ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks ALSA: usb-audio: add implicit fb quirk for Axe-Fx II ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define ASoC: zte: spdif and i2s drivers are not zx296702 specific ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting ASoC: rsnd: enable/disable ADG when suspend/resume timing ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params ALSA: cs46xx: add a new line ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture ASoC: nau8825: disable sinc filter for high THD of ADC ALSA: usb-audio: more tolerant packetsize ALSA: usb-audio: avoid setting of sample rate multiple times on bus ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq ...
2016-12-13Merge tag 'char-misc-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
2016-12-13Merge tag 'driver-core-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...
2016-12-13Merge tag 'staging-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here's the "big" staging/iio pull request for 4.10-rc1. Not as big as 4.9 was, but still just over a thousand changes. We almost broke even of lines added vs. removed, as the slicoss driver was removed (got a "clean" driver for the same hardware through the netdev tree), and some iio drivers were also dropped, but I think we ended up adding a few thousand lines to the source tree in the end. Other than that it's a lot of minor fixes all over the place, nothing major stands out at all. All of these have been in linux-next for a while. There will be a merge conflict with Al's vfs tree in the lustre code, but the resolution for that should be pretty simple, that too has been in linux-next" * tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits) staging: comedi: comedidev.h: Document usage of 'detach' handler staging: fsl-mc: remove unnecessary info prints from bus driver staging: fsl-mc: add sysfs ABI doc staging/lustre/o2iblnd: Fix misspelled attemps->attempts staging/lustre/o2iblnd: Fix misspelling intialized->intialized staging/lustre: Convert all bare unsigned to unsigned int staging/lustre/socklnd: Fix whitespace problem staging/lustre/o2iblnd: Add missing space staging/lustre/lnetselftest: Fix potential integer overflow staging: greybus: audio_module: remove redundant OOM message staging: dgnc: Fix lines longer than 80 characters staging: dgnc: fix blank line after '{' warnings. staging/android: remove Sync Framework tasks from TODO staging/lustre/osc: Revert erroneous list_for_each_entry_safe use staging: slicoss: remove the staging driver staging: lustre: libcfs: remove lnet upcall code staging: lustre: remove set but unused variables staging: lustre: osc: set lock data for readahead lock staging: lustre: import: don't reconnect during connect interpret staging: lustre: clio: remove mtime check in vvp_io_fault_start() ...
2016-12-13Merge tag 'usb-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...
2016-12-13Merge tag 'pm-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "Again, cpufreq gets more changes than the other parts this time (one new driver, one old driver less, a bunch of enhancements of the existing code, new CPU IDs, fixes, cleanups) There also are some changes in cpuidle (idle injection rework, a couple of new CPU IDs, online/offline rework in intel_idle, fixes and cleanups), in the generic power domains framework (mostly related to supporting power domains containing CPUs), and in the Operating Performance Points (OPP) library (mostly related to supporting devices with multiple voltage regulators) In addition to that, the system sleep state selection interface is modified to make it easier for distributions with unchanged user space to support suspend-to-idle as the default system suspend method, some issues are fixed in the PM core, the latency tolerance PM QoS framework is improved a bit, the Intel RAPL power capping driver is cleaned up and there are some fixes and cleanups in the devfreq subsystem Specifics: - New cpufreq driver for Broadcom STB SoCs and a Device Tree binding for it (Markus Mayer) - Support for ARM Integrator/AP and Integrator/CP in the generic DT cpufreq driver and elimination of the old Integrator cpufreq driver (Linus Walleij) - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier, and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie, Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik) - cpufreq core fix to eliminate races that may lead to using inactive policy objects and related cleanups (Rafael Wysocki) - cpufreq schedutil governor update to make it use SCHED_FIFO kernel threads (instead of regular workqueues) for doing delayed work (to reduce the response latency in some cases) and related cleanups (Viresh Kumar) - New cpufreq sysfs attribute for resetting statistics (Markus Mayer) - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis, Viresh Kumar) - Support for using generic cpufreq governors in the intel_pstate driver (Rafael Wysocki) - Support for per-logical-CPU P-state limits and the EPP/EPB (Energy Performance Preference/Energy Performance Bias) knobs in the intel_pstate driver (Srinivas Pandruvada) - New CPU ID for Knights Mill in intel_pstate (Piotr Luc) - intel_pstate driver modification to use the P-state selection algorithm based on CPU load on platforms with the system profile in the ACPI tables set to "mobile" (Srinivas Pandruvada) - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki, Srinivas Pandruvada) - cpufreq powernv driver updates including fast switching support (for the schedutil governor), fixes and cleanus (Akshay Adiga, Andrew Donnellan, Denis Kirjanov) - acpi-cpufreq driver rework to switch it over to the new CPU offline/online state machine (Sebastian Andrzej Siewior) - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth Prakash) - Idle injection rework (to make it use the regular idle path instead of a home-grown custom one) and related powerclamp thermal driver updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej Siewior) - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy Shevchenko, Piotr Luc) - intel_idle driver cleanups and switch over to using the new CPU offline/online state machine (Anna-Maria Gleixner, Sebastian Andrzej Siewior) - cpuidle DT driver update to support suspend-to-idle properly (Sudeep Holla) - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian, Rafael Wysocki) - Preliminary support for power domains including CPUs in the generic power domains (genpd) framework and related DT bindings (Lina Iyer) - Assorted fixes and cleanups in the generic power domains (genpd) framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven) - Preliminary support for devices with multiple voltage regulators and related fixes and cleanups in the Operating Performance Points (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd) - System sleep state selection interface rework to make it easier to support suspend-to-idle as the default system suspend method (Rafael Wysocki) - PM core fixes and cleanups, mostly related to the interactions between the system suspend and runtime PM frameworks (Ulf Hansson, Sahitya Tummala, Tony Lindgren) - Latency tolerance PM QoS framework imorovements (Andrew Lutomirski) - New Knights Mill CPU ID for the Intel RAPL power capping driver (Piotr Luc) - Intel RAPL power capping driver fixes, cleanups and switch over to using the new CPU offline/online state machine (Jacob Pan, Thomas Gleixner, Sebastian Andrzej Siewior) - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc, rockchip-dfi devfreq drivers and the devfreq core (Axel Lin, Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar) - Fix for false-positive KASAN warnings during resume from ACPI S3 (suspend-to-RAM) on x86 (Josh Poimboeuf) - Memory map verification during resume from hibernation on x86 to ensure a consistent address space layout (Chen Yu) - Wakeup sources debugging enhancement (Xing Wei) - rockchip-io AVS driver cleanup (Shawn Lin)" * tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits) devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks devfreq: rk3399_dmc: Remove dangling rcu_read_unlock() devfreq: exynos: Don't use OPP structures outside of RCU locks Documentation: intel_pstate: Document HWP energy/performance hints cpufreq: intel_pstate: Support for energy performance hints with HWP cpufreq: intel_pstate: Add locking around HWP requests PM / sleep: Print active wakeup sources when blocking on wakeup_count reads PM / core: Fix bug in the error handling of async suspend PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend PM / Domains: Fix compatible for domain idle state PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators() PM / OPP: Allow platform specific custom set_opp() callbacks PM / OPP: Separate out _generic_set_opp() PM / OPP: Add infrastructure to manage multiple regulators PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage() PM / OPP: Manage supply's voltage/current in a separate structure PM / OPP: Don't use OPP structure outside of rcu protected section PM / OPP: Reword binding supporting multiple regulators per device PM / OPP: Fix incorrect cpu-supply property in binding cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state() ..
2016-12-13Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
2016-12-13Merge tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - VFIO updates for v4.10 primarily include a new Mediated Device interface, which essentially allows software defined devices to be exposed to users through VFIO. The host vendor driver providing this virtual device polices, or mediates user access to the device. These devices often incorporate portions of real devices, for instance the primary initial users of this interface expose vGPUs which allow the user to map mediated devices, or mdevs, to a portion of a physical GPU. QEMU composes these mdevs into PCI representations using the existing VFIO user API. This enables both Intel KVM-GT support, which is also expected to arrive into Linux mainline during the v4.10 merge window, as well as NVIDIA vGPU, and also Channel I/O devices (aka CCW devices) for s390 virtualization support. (Kirti Wankhede, Neo Jia) - Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin) - Fixes to VFIO capability chain handling (Eric Auger) - Error handling fixes for fallout from mdev (Christophe JAILLET) - Notifiers to expose struct kvm to mdev vendor drivers (Jike Song) - type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia) * tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits) vfio iommu type1: Fix size argument to vfio_find_dma() in pin_pages/unpin_pages vfio iommu type1: Fix size argument to vfio_find_dma() during DMA UNMAP. vfio iommu type1: WARN_ON if notifier block is not unregistered kvm: set/clear kvm to/from vfio_group when group add/delete vfio: support notifier chain in vfio_group vfio: vfio_register_notifier: classify iommu notifier vfio: Fix handling of error returned by 'vfio_group_get_from_dev()' vfio: fix vfio_info_cap_add/shift vfio/pci: Drop unnecessary pcibios_err_to_errno() MAINTAINERS: Add entry VFIO based Mediated device drivers docs: Sample driver to demonstrate how to use Mediated device framework. docs: Sysfs ABI for mediated device framework docs: Add Documentation for Mediated devices vfio: Define device_api strings vfio_platform: Updated to use vfio_set_irqs_validate_and_prepare() vfio_pci: Updated to use vfio_set_irqs_validate_and_prepare() vfio: Introduce vfio_set_irqs_validate_and_prepare() vfio_pci: Update vfio_pci to use vfio_info_add_capability() vfio: Introduce common function to add capabilities vfio iommu: Add blocking notifier to notify DMA_UNMAP ...
2016-12-13Merge tag 'rproc-v4.10' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: - introduce remoteproc "subdevice" support, which allows remoteproc driver to associate devices to the "running" state of the remoteproc, allowing devices to be probed and removed as the remote processor is booted, shut down or recovering from a crash. - handling of virtio device resources was improved, vring memory is now allocated as part of other memory allocation. This ensures that all vrings for all virtio devices are allocated before we boot the remote processor. - the debugfs mechanism for starting and stopping remoteproc instances was replaced with a sysfs interface, also providing a mechanism for specifying firmware to use by the instance. This allows user space to load and boot use case specific firmware on remote processors. - new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as removal of the unused StE modem loader. - finally support for crash recovery in the Qualcomm Wirelss subsystem (used for WiFi/BT/FM on a number of platforms) and a number of bug fixes and cleanups * tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits) remoteproc: qcom_adsp_pil: select qcom_scm remoteproc: Drop wait in __rproc_boot() remoteproc/ste: Delete unused driver remoteproc: Remove "experimental" warning remoteproc: qcom_adsp_pil: select qcom_scm dt-binding: soc: qcom: smd: Add label property remoteproc: qcom: mdt_loader: add include for sizes remoteproc: Update last rproc_put users to rproc_free remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE remoteproc: wcnss-pil: add QCOM_SMD dependency dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'" remoteproc: Add support for xo clock remoteproc: adsp-pil: fix recursive dependency remoteproc: Introduce Qualcomm ADSP PIL dt-binding: remoteproc: Introduce ADSP loader binding remoteproc: qcom_wcnss: Fix circular module dependency remoteproc: Merge table_ptr and cached_table pointers remoteproc: Remove custom vdev handler list remoteproc: Update max_notifyid as we allocate vrings remoteproc: Decouple vdev resources and devices ...
2016-12-13Merge tag 'leds_for_4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - userspace LED class driver - it can be useful for testing triggers and can also be used to implement virtual LEDs - LED class driver for NIC78bx device - LED core fixes for preventing potential races while setting brightness when software blinking is enabled - improvements in LED documentation to mention semantics on changing brightness while trigger is active * tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Add ACPI support leds: netxbig: fix module autoload for OF registration leds: pca963x: Add ACPI support leds: leds-cobalt-raq: use builtin_platform_driver led: core: Fix blink_brightness setting race led: core: Use atomic bit-field for the blink-flags leds: Add user LED driver for NIC78bx device leds: verify vendor and change license in mlxcpld driver leds: pca963x: enable low-power state leds: pca9532: Use default trigger value from platform data leds: pca963x: workaround group blink scaling issue cleanup LED documentation and make it match reality leds: lp3952: Export I2C module alias information for module autoload leds: mc13783: Fix MC13892 keypad led access ledtrig-cpu.c: fix english leds/leds-lp5523.txt: make documentation match reality tools/leds: Add uledmon program for monitoring userspace LEDs leds: Use macro for max device node name size leds: Introduce userspace LED class driver mfd: qcom-pm8xxx: Clean up PM8XXX namespace
2016-12-12Merge tag 'docs-4.10' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation update from Jonathan Corbet: "These are the documentation changes for 4.10. It's another busy cycle for the docs tree, as the sphinx conversion continues. Highlights include: - Further work on PDF output, which remains a bit of a pain but should be more solid now. - Five more DocBook template files converted to Sphinx. Only 27 to go... Lots of plain-text files have also been converted and integrated. - Images in binary formats have been replaced with more source-friendly versions. - Various bits of organizational work, including the renaming of various files discussed at the kernel summit. - New documentation for the device_link mechanism. ... and, of course, lots of typo fixes and small updates" * tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits) dma-buf: Extract dma-buf.rst Update Documentation/00-INDEX docs: 00-INDEX: document directories/files with no docs docs: 00-INDEX: remove non-existing entries docs: 00-INDEX: add missing entries for documentation files/dirs docs: 00-INDEX: consolidate process/ and admin-guide/ description scripts: add a script to check if Documentation/00-INDEX is sane Docs: change sh -> awk in REPORTING-BUGS Documentation/core-api/device_link: Add initial documentation core-api: remove an unexpected unident ppc/idle: Add documentation for powersave=off Doc: Correct typo, "Introdution" => "Introduction" Documentation/atomic_ops.txt: convert to ReST markup Documentation/local_ops.txt: convert to ReST markup Documentation/assoc_array.txt: convert to ReST markup docs-rst: parse-headers.pl: cleanup the documentation docs-rst: fix media cleandocs target docs-rst: media/Makefile: reorganize the rules docs-rst: media: build SVG from graphviz files docs-rst: replace bayer.png by a SVG image ...
2016-12-12Merge branches 'pm-sleep' and 'powercap'Rafael J. Wysocki
* pm-sleep: PM / sleep: Print active wakeup sources when blocking on wakeup_count reads x86/suspend: fix false positive KASAN warning on suspend/resume PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag PM / sleep: System sleep state selection interface rework PM / hibernate: Verify the consistent of e820 memory map by md5 digest * powercap: powercap / RAPL: Add Knights Mill CPUID powercap/intel_rapl: fix and tidy up error handling powercap/intel_rapl: Track active CPUs internally powercap/intel_rapl: Cleanup duplicated init code powercap/intel rapl: Convert to hotplug state machine powercap/intel_rapl: Propagate error code when registration fails powercap/intel_rapl: Add missing domain data update on hotplug
2016-12-12Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2016-12-08staging: fsl-mc: add sysfs ABI docStuart Yoder
define the bind/unbind sysfs interfaces for the fsl-mc bus Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-05ASoC: Intel: Add ASoC Intel SST Atom sysfs descriptionSebastien Guiriec
For ASoC Intel SST Atom based devices a sysfs entry is created in order to track FW version. The FW version is useful in order to check the different Version of LPE DSP FW across Intel SoCs. Signed-off-by: Sebastien Guiriec <sebastien.guiriec@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01block: add support for REQ_OP_WRITE_ZEROESChaitanya Kulkarni
This adds a new block layer operation to zero out a range of LBAs. This allows to implement zeroing for devices that don't use either discard with a predictable zero pattern or WRITE SAME of zeroes. The prominent example of that is NVMe with the Write Zeroes command, but in the future, this should also help with improving the way zeroing discards work. For this operation, suitable entry is exported in sysfs which indicate the number of maximum bytes allowed in one write zeroes operation by the device. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-28Merge tag 'phy-for-4.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.10 Merge contains: *) Add new usb2 phy driver for Meson8b and GXBB *) Remove phy drivers added for miphy365 and STiH415/6 (as support for these SoCs are removed from the kernel) *) Add a sysfs entry to facilitate usb role swap in rcar SoC *) Add support for otg port in rk3399 *) misc fixes in various phy drivers and cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>