summaryrefslogtreecommitdiff
path: root/Documentation/ABI
AgeCommit message (Collapse)Author
2017-09-12Merge tag 'f2fs-for-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've mostly tuned f2fs to provide better user experience for Android. Especially, we've worked on atomic write feature again with SQLite community in order to support it officially. And we added or modified several facilities to analyze and enhance IO behaviors. Major changes include: - add app/fs io stat - add inode checksum feature - support project/journalled quota - enhance atomic write with new ioctl() which exposes feature set - enhance background gc/discard/fstrim flows with new gc_urgent mode - add F2FS_IOC_FS{GET,SET}XATTR - fix some quota flows" * tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits) f2fs: hurry up to issue discard after io interruption f2fs: fix to show correct discard_granularity in sysfs f2fs: detect dirty inode in evict_inode f2fs: clear radix tree dirty tag of pages whose dirty flag is cleared f2fs: speed up gc_urgent mode with SSR f2fs: better to wait for fstrim completion f2fs: avoid race in between read xattr & write xattr f2fs: make get_lock_data_page to handle encrypted inode f2fs: use generic terms used for encrypted block management f2fs: introduce f2fs_encrypted_file for clean-up Revert "f2fs: add a new function get_ssr_cost" f2fs: constify super_operations f2fs: fix to wake up all sleeping flusher f2fs: avoid race in between atomic_read & atomic_inc f2fs: remove unneeded parameter of change_curseg f2fs: update i_flags correctly f2fs: don't check inode's checksum if it was dirtied or writebacked f2fs: don't need to update inode checksum for recovery f2fs: trigger fdatasync for non-atomic_write file f2fs: fix to avoid race in between aio and gc ...
2017-09-07Merge tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This one features the usual updates to the drivers and one good part of removing DA_SG from core as it has no users. Summary: - Remove DMA_SG support as we have no users for this feature - New driver for Altera / Intel mSGDMA IP core - Support for memset in dmatest and qcom_hidma driver - Update for non cyclic mode in k3dma, bunch of update in bam_dma, bcm sba-raid - Constify device ids across drivers" * tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (52 commits) dmaengine: sun6i: support V3s SoC variant dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk dmaengine: rcar-dmac: document R8A77970 bindings dmaengine: xilinx_dma: Fix error code format specifier dmaengine: altera: Use macros instead of structs to describe the registers dmaengine: ti-dma-crossbar: Fix dra7 reserve function dmaengine: pl330: constify amba_id dmaengine: pl08x: constify amba_id dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_COMPLETED dmaengine: bcm-sba-raid: Explicitly ACK mailbox message after sending dmaengine: bcm-sba-raid: Add debugfs support dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_RECEIVED dmaengine: bcm-sba-raid: Re-factor sba_process_deferred_requests() dmaengine: bcm-sba-raid: Pre-ack async tx descriptor dmaengine: bcm-sba-raid: Peek mbox when we have no free requests dmaengine: bcm-sba-raid: Alloc resources before registering DMA device dmaengine: bcm-sba-raid: Improve sba_issue_pending() run duration dmaengine: bcm-sba-raid: Increase number of free sba_request dmaengine: bcm-sba-raid: Allow arbitrary number free sba_request dmaengine: bcm-sba-raid: Remove reqs_free_count from sba_device ...
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-07Merge tag 'powerpc-4.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Nothing really major this release, despite quite a lot of activity. Just lots of things all over the place. Some things of note include: - Access via perf to a new type of PMU (IMC) on Power9, which can count both core events as well as nest unit events (Memory controller etc). - Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page Walk Cache (PWC) flushes when the structure of the tree is not changing. - Reworks/cleanups of do_page_fault() to modernise it and bring it closer to other architectures where possible. - Rework of our page table walking so that THP updates only need to send IPIs to CPUs where the affected mm has run, rather than all CPUs. - The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems. This avoids problems with the percpu allocator on systems with very sparse NUMA layouts. - STRICT_KERNEL_RWX support on PPC32. - A new sched domain topology for Power9, to capture the fact that pairs of cores may share an L2 cache. - Power9 support for VAS, which is a new mechanism for accessing coprocessors, and initial support for using it with the NX compression accelerator. - Major work on the instruction emulation support, adding support for many new instructions, and reworking it so it can be used to implement the emulation needed to fixup alignment faults. - Support for guests under PowerVM to use the Power9 XIVE interrupt controller. And probably that many things again that are almost as interesting, but I had to keep the list short. Plus the usual fixes and cleanups as always. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui" * tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits) powerpc/xive: Fix section __init warning powerpc: Fix kernel crash in emulation of vector loads and stores powerpc/xive: improve debugging macros powerpc/xive: add XIVE Exploitation Mode to CAS powerpc/xive: introduce H_INT_ESB hcall powerpc/xive: add the HW IRQ number under xive_irq_data powerpc/xive: introduce xive_esb_write() powerpc/xive: rename xive_poke_esb() in xive_esb_read() powerpc/xive: guest exploitation of the XIVE interrupt controller powerpc/xive: introduce a common routine xive_queue_page_alloc() powerpc/sstep: Avoid used uninitialized error axonram: Return directly after a failed kzalloc() in axon_ram_probe() axonram: Improve a size determination in axon_ram_probe() axonram: Delete an error message for a failed memory allocation in axon_ram_probe() powerpc/powernv/npu: Move tlb flush before launching ATSD powerpc/macintosh: constify wf_sensor_ops structures powerpc/iommu: Use permission-specific DEVICE_ATTR variants powerpc/eeh: Delete an error out of memory message at init time powerpc/mm: Use seq_putc() in two functions macintosh: Convert to using %pOF instead of full_name ...
2017-09-06mm: add /proc/pid/smaps_rollupDaniel Colascione
/proc/pid/smaps_rollup is a new proc file that improves the performance of user programs that determine aggregate memory statistics (e.g., total PSS) of a process. Android regularly "samples" the memory usage of various processes in order to balance its memory pool sizes. This sampling process involves opening /proc/pid/smaps and summing certain fields. For very large processes, sampling memory use this way can take several hundred milliseconds, due mostly to the overhead of the seq_printf calls in task_mmu.c. smaps_rollup improves the situation. It contains most of the fields of /proc/pid/smaps, but instead of a set of fields for each VMA, smaps_rollup instead contains one synthetic smaps-format entry representing the whole process. In the single smaps_rollup synthetic entry, each field is the summation of the corresponding field in all of the real-smaps VMAs. Using a common format for smaps_rollup and smaps allows userspace parsers to repurpose parsers meant for use with non-rollup smaps for smaps_rollup, and it allows userspace to switch between smaps_rollup and smaps at runtime (say, based on the availability of smaps_rollup in a given kernel) with minimal fuss. By using smaps_rollup instead of smaps, a caller can avoid the significant overhead of formatting, reading, and parsing each of a large process's potentially very numerous memory mappings. For sampling system_server's PSS in Android, we measured a 12x speedup, representing a savings of several hundred milliseconds. One alternative to a new per-process proc file would have been including PSS information in /proc/pid/status. We considered this option but thought that PSS would be too expensive (by a few orders of magnitude) to collect relative to what's already emitted as part of /proc/pid/status, and slowing every user of /proc/pid/status for the sake of readers that happen to want PSS feels wrong. The code itself works by reusing the existing VMA-walking framework we use for regular smaps generation and keeping the mem_size_stats structure around between VMA walks instead of using a fresh one for each VMA. In this way, summation happens automatically. We let seq_file walk over the VMAs just as it does for regular smaps and just emit nothing to the seq_file until we hit the last VMA. Benchmarks: using smaps: iterations:1000 pid:1163 pss:220023808 0m29.46s real 0m08.28s user 0m20.98s system using smaps_rollup: iterations:1000 pid:1163 pss:220702720 0m04.39s real 0m00.03s user 0m04.31s system We're using the PSS samples we collect asynchronously for system-management tasks like fine-tuning oom_adj_score, memory use tracking for debugging, application-level memory-use attribution, and deciding whether we want to kill large processes during system idle maintenance windows. Android has been using PSS for these purposes for a long time; as the average process VMA count has increased and and devices become more efficiency-conscious, PSS-collection inefficiency has started to matter more. IMHO, it'd be a lot safer to optimize the existing PSS-collection model, which has been fine-tuned over the years, instead of changing the memory tracking approach entirely to work around smaps-generation inefficiency. Tim said: : There are two main reasons why Android gathers PSS information: : : 1. Android devices can show the user the amount of memory used per : application via the settings app. This is a less important use case. : : 2. We log PSS to help identify leaks in applications. We have found : an enormous number of bugs (in the Android platform, in Google's own : apps, and in third-party applications) using this data. : : To do this, system_server (the main process in Android userspace) will : sample the PSS of a process three seconds after it changes state (for : example, app is launched and becomes the foreground application) and about : every ten minutes after that. The net result is that PSS collection is : regularly running on at least one process in the system (usually a few : times a minute while the screen is on, less when screen is off due to : suspend). PSS of a process is an incredibly useful stat to track, and we : aren't going to get rid of it. We've looked at some very hacky approaches : using RSS ("take the RSS of the target process, subtract the RSS of the : zygote process that is the parent of all Android apps") to reduce the : accounting time, but it regularly overestimated the memory used by 20+ : percent. Accordingly, I don't think that there's a good alternative to : using PSS. : : We started looking into PSS collection performance after we noticed random : frequency spikes while a phone's screen was off; occasionally, one of the : CPU clusters would ramp to a high frequency because there was 200-300ms of : constant CPU work from a single thread in the main Android userspace : process. The work causing the spike (which is reasonable governor : behavior given the amount of CPU time needed) was always PSS collection. : As a result, Android is burning more power than we should be on PSS : collection. : : The other issue (and why I'm less sure about improving smaps as a : long-term solution) is that the number of VMAs per process has increased : significantly from release to release. After trying to figure out why we : were seeing these 200-300ms PSS collection times on Android O but had not : noticed it in previous versions, we found that the number of VMAs in the : main system process increased by 50% from Android N to Android O (from : ~1800 to ~2700) and varying increases in every userspace process. Android : M to N also had an increase in the number of VMAs, although not as much. : I'm not sure why this is increasing so much over time, but thinking about : ASLR and ways to make ASLR better, I expect that this will continue to : increase going forward. I would not be surprised if we hit 5000 VMAs on : the main Android process (system_server) by 2020. : : If we assume that the number of VMAs is going to increase over time, then : doing anything we can do to reduce the overhead of each VMA during PSS : collection seems like the right way to go, and that means outputting an : aggregate statistic (to avoid whatever overhead there is per line in : writing smaps and in reading each line from userspace). Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com Signed-off-by: Daniel Colascione <dancol@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06mm, swap: add sysfs interface for VMA based swap readaheadHuang Ying
The sysfs interface to control the VMA based swap readahead is added as follow, /sys/kernel/mm/swap/vma_ra_enabled Enable the VMA based swap readahead algorithm, or use the original global swap readahead algorithm. /sys/kernel/mm/swap/vma_ra_max_order Set the max order of the readahead window size for the VMA based swap readahead algorithm. The corresponding ABI documentation is added too. Link: http://lkml.kernel.org/r/20170807054038.1843-5-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: add config and doc file for writeback featureMinchan Kim
This patch adds document and kconfig for using of writeback feature. Link: http://lkml.kernel.org/r/1498459987-24562-10-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-05Merge tag 'pm-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "This time (again) cpufreq gets the majority of changes which mostly are driver updates (including a major consolidation of intel_pstate), some schedutil governor modifications and core cleanups. There also are some changes in the system suspend area, mostly related to diagnostics and debug messages plus some renames of things related to suspend-to-idle. One major change here is that suspend-to-idle is now going to be preferred over S3 on systems where the ACPI tables indicate to do so and provide requsite support (the Low Power Idle S0 _DSM in particular). The system sleep documentation and the tools related to it are updated too. The rest is a few cpuidle changes (nothing major), devfreq updates, generic power domains (genpd) framework updates and a few assorted modifications elsewhere. Specifics: - Drop the P-state selection algorithm based on a PID controller from intel_pstate and make it use the same P-state selection method (based on the CPU load) for all types of systems in the active mode (Rafael Wysocki, Srinivas Pandruvada). - Rework the cpufreq core and governors to make it possible to take cross-CPU utilization updates into account and modify the schedutil governor to actually do so (Viresh Kumar). - Clean up the handling of transition latency information in the cpufreq core and untangle it from the information on which drivers cannot do dynamic frequency switching (Viresh Kumar). - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek cpufreq driver and update its DT bindings (Sean Wang). - Modify the cpufreq dt-platdev driver to autimatically create cpufreq devices for the new (v2) Operating Performance Points (OPP) DT bindings and update its whitelist of supported systems (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley Xiao). - Add support for Ux500 to the cpufreq-dt driver and drop the obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann). - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem Nguyen). - Fix and clean up assorted issues in the cpufreq drivers and core (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva, Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla). - Update the IO-wait boost handling in the schedutil governor to make it less aggressive (Joel Fernandes). - Rework system suspend diagnostics to make it print fewer messages to the kernel log by default, add a sysfs knob to allow more suspend-related messages to be printed and add Low Power S0 Idle constraints checks to the ACPI suspend-to-idle code (Rafael Wysocki, Srinivas Pandruvada). - Prefer suspend-to-idle over S3 on ACPI-based systems with the ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM interface present in the ACPI tables (Rafael Wysocki). - Update documentation related to system sleep and rename a number of items in the code to make it cleare that they are related to suspend-to-idle (Rafael Wysocki). - Export a variable allowing device drivers to check the target system sleep state from the core system suspend code (Florian Fainelli). - Clean up the cpuidle subsystem to handle the polling state on x86 in a more straightforward way and to use %pOF instead of full_name (Rafael Wysocki, Rob Herring). - Update the devfreq framework to fix and clean up a few minor issues (Chanwoo Choi, Rob Herring). - Extend diagnostics in the generic power domains (genpd) framework and clean it up slightly (Thara Gopinath, Rob Herring). - Fix and clean up a couple of issues in the operating performance points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz). - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Fix the usage of notifiers in CPU power management on some platforms (Alex Shi). - Update the pm-graph system suspend/hibernation and boot profiling utility (Todd Brandt). - Make it possible to run the cpupower utility without CPU0 (Prarit Bhargava)" * tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits) cpuidle: Make drivers initialize polling state cpuidle: Move polling state initialization code to separate file cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller PM: docs: Delete the obsolete states.txt document PM: docs: Describe high-level PM strategies and sleep states PM / devfreq: Fix memory leak when fail to register device PM / devfreq: Add dependency on PM_OPP PM / devfreq: Move private devfreq_update_stats() into devfreq PM / devfreq: Convert to using %pOF instead of full_name PM / AVS: rockchip-io: add io selectors and supplies for RV1108 cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpuidle: Convert to using %pOF instead of full_name cpufreq: Convert to using %pOF instead of full_name PM / Domains: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms ...
2017-09-05Merge tag 'char-misc-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.14-rc1. Lots of different stuff in here, it's been an active development cycle for some reason. Highlights are: - updated binder driver, this brings binder up to date with what shipped in the Android O release, plus some more changes that happened since then that are in the Android development trees. - coresight updates and fixes - mux driver file renames to be a bit "nicer" - intel_th driver updates - normal set of hyper-v updates and changes - small fpga subsystem and driver updates - lots of const code changes all over the driver trees - extcon driver updates - fmc driver subsystem upadates - w1 subsystem minor reworks and new features and drivers added - spmi driver updates Plus a smattering of other minor driver updates and fixes. All of these have been in linux-next with no reported issues for a while" * tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits) ANDROID: binder: don't queue async transactions to thread. ANDROID: binder: don't enqueue death notifications to thread todo. ANDROID: binder: Don't BUG_ON(!spin_is_locked()). ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl ANDROID: binder: push new transactions to waiting threads. ANDROID: binder: remove proc waitqueue android: binder: Add page usage in binder stats android: binder: fixup crash introduced by moving buffer hdr drivers: w1: add hwmon temp support for w1_therm drivers: w1: refactor w1_slave_show to make the temp reading functionality separate drivers: w1: add hwmon support structures eeprom: idt_89hpesx: Support both ACPI and OF probing mcb: Fix an error handling path in 'chameleon_parse_cells()' MCB: add support for SC31 to mcb-lpc mux: make device_type const char: virtio: constify attribute_group structures. Documentation/ABI: document the nvmem sysfs files lkdtm: fix spelling mistake: "incremeted" -> "incremented" perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file nvmem: include linux/err.h from header ...
2017-09-05Merge tag 'staging-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the big staging and IIO driver update for 4.14-rc1. Lots of staging driver fixes and cleanups, including some reorginizing of the lustre header files to try to impose some sanity on what is, and what is not, the uapi for that filesystem. There are some tty core changes in here as well, as the speakup drivers need them, and that's ok with me, they are sane and the speakup code is getting nicer because of it. There is also the addition of the obiligatory new wifi driver, just because it has been a release or two since we added our last one... Other than that, lots and lots of small coding style fixes, as usual. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits) staging:rtl8188eu:core Fix remove unneccessary else block staging: typec: fusb302: make structure fusb302_psy_desc static staging: unisys: visorbus: make two functions static staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks staging: r8822be: Simplify deinit_priv() staging: r8822be: Remove some dead code staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability staging:rtl8188eu Fix comparison to NULL staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd Staging: Pi433: style fix - tabs and spaces staging: pi433: fix spelling mistake: "preample" -> "preamble" staging:rtl8188eu:core Fix Code Indent staging: typec: fusb302: Export current-limit through a power_supply class dev staging: typec: fusb302: Add support for USB2 charger detection through extcon staging: typec: fusb302: Use client->irq as irq if set staging: typec: fusb302: Get max snk mv/ma/mw from device-properties staging: typec: fusb302: Set max supply voltage to 5V staging: typec: tcpm: Add get_current_limit tcpc_dev callback staging:rtl8188eu Use __func__ instead of function name staging: lustre: coding style fixes found by checkpatch.pl ...
2017-09-04iio: counter: Add support for STM32 LPTimerFabrice Gasnier
Add support for STM32 Low-Power Timer, that can be used as counter or quadrature encoder. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-28Documentation/ABI: document the nvmem sysfs filesSrinivas Kandagatla
NVMEM has been in kernel since v4.2 but the ABI document was missing since then. userspace interface did not change since then and seems stable, so this patch documents the nvmem ABI. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28thunderbolt: Allow clearing the keyBernat, Yehezkel
If secure authentication of a devices fails, either because the device already has another key uploaded, or there is some other error sending challenge to the device, and the user only wants to approve the device just once (without a new key being uploaded to the device) the current implementation does not allow this because the key cannot be cleared once set even if we allow it to be changed. Make this scenario possible and allow clearing the key by writing empty string to the key sysfs file. Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28Add documentation for the powerpc memtrace debugfs filesRashmica Gupta
CONFIG_PPC_MEMTRACE must be set to use this feature. This can only be used on powernv platforms. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> [mpe: Update dates and kernel versions, mention size is in bytes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28usb: misc: lvstest: add entry to place port in compliance modeJack Pham
Add support for the SuperSpeed Link Layer test case TD.7.34 which requires the operator to place the port into compliance mode, and to subsequently bring it out via reset. Historically according to the (now deprecated) USB 3.0 specification a SuperSpeed host downstream port would automatically transition to Compliance mode from the Polling state if LFPS polling times out. However the language in USB 3.1 as well as xHCI 1.1 states it may be required to explicitly enable this transition. For such hosts this is done by sending a SET_FEATURE(PORT_LINK_STATE) with the state set to Compliance to the root hub port. Similar to the other supported commands, to do this via sysfs: echo > /sys/bus/usb/devices/2-0\:1.0/enable_compliance According to xHCI 1.1 section 4.19.1.2.4.1, this enables the transition to compliance mode upon LFPS timeout. Note that this can only be issued when the port is in disconnected state. And in order to disable this behavior on subsequent transitions, a warm reset should be issued. So add another entry to do that: echo > /sys/bus/usb/devices/2-0\:1.0/warm_reset In general these attributes can also be useful for other USB SuperSpeed compliance tests such as electrical and eye diagram testing which require CPn patterns to be transmitted. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-21f2fs: introduce discard_granularity sysfs entryChao Yu
Commit d618ebaf0aa8 ("f2fs: enable small discard by default") enables f2fs to issue 4K size discard in real-time discard mode. However, issuing smaller discard may cost more lifetime but releasing less free space in flash device. Since f2fs has ability of separating hot/cold data and garbage collection, we can expect that small-sized invalid region would expand soon with OPU, deletion or garbage collection on valid datas, so it's better to delay or skip issuing smaller size discards, it could help to reduce overmuch consumption of IO bandwidth and lifetime of flash storage. This patch makes f2fs selectng 64K size as its default minimal granularity, and issue discard with the size which is not smaller than minimal granularity. Also it exposes discard granularity as sysfs entry for configuration in different scenario. Jaegeuk Kim: We must issue all the accumulated discard commands when fstrim is called. So, I've added pend_list_tag[] to indicate whether we should issue the commands or not. If tag sets P_ACTIVE or P_TRIM, we have to issue them. P_TRIM is set once at a time, given fstrim trigger. In addition, issue_discard_thread is calling too much due to the number of discard commands remaining in the pending list. I added a timer to control it likewise gc_thread. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-21dmaengine: ioatdma: Add ABI documentUjjal Singh
ABI document added to describe all sysfs variables for dma Signed-off-by: Ujjal Singh <ujjal.singh@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-15f2fs: introduce gc_urgent mode for background GCJaegeuk Kim
This patch adds a sysfs entry to control urgent mode for background GC. If this is set, background GC thread conducts GC with gc_urgent_sleep_time all the time. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-15usb: gadget: add RNDIS configfs options for class/subclass/protocolDavid Lechner
This adds 3 new options to the RNDIS gadget function configs. It allows overriding the default USB interface class/subclass/protocol. The motivation for this is that if you set the values to "ef" (Misc), "04" (RNDIS), "01" (Ethernet) respectively, then the device will be recognized by the rndiscmp.inf file in Windows Vista and newer and will cause Windows to load the correct RNDIS driver without the need for a custom (signed) .inf file. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-10powerpc/powernv: Add support to set power-shifting-ratioShilpasri G Bhat
This patch adds support to set power-shifting-ratio which hints the firmware how to distribute/throttle power between different entities in a system (e.g CPU v/s GPU). This ratio is used by OCC for power capping algorithm. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10powerpc/powernv: Add support for powercap frameworkShilpasri G Bhat
Adds a generic powercap framework to change the system powercap inband through OPAL-OCC command/response interface. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-27Merge tag 'iio-for-4.14a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of IIO new device support, features and cleanups for the 4.14 cycle. 4 completely new drivers in this set and plenty of other stuff. One ABI change due to a silly mistake a long time back. Hopefully no one will notice. It effects the numerical order of consumer device channels which was the reverse of the obvious. It's going the slow way to allow us some margin to spot if we have broken userspace or not (seems unlikely) New Device Support * ccs811 - new driver for the Volatile Organic Compounds (VOC) sensor. * dln2 adc - new driver for the ADC on this flexible usb board. * EP93xx - new driver for this Cirrus logic SoC ADC. * ltc2471 - new ADC driver support the ltc2471 and ltc2473 * st_accel - add trivial table entries to support H3LIS331DL, LIS331DL, LIS3LV02DL. * st_gyro - add L3GD20H support (again) having fixed the various things that were broken in the first try. Includes devicetree binding. * stm32 dac - add support for the DACs in the STM32F4 series Features * Documentation - add missing power attribute documentation to the ABI docs. * at91-sama5d2 - add hardware trigger and buffered capture support with bindings. - suspend and resume functionality. * bmc150 - support for the BOSC0200 ACPI device id seen on some tablets. * hdc100x - devicetree bindings - document supported devices - match table and device ids. * hts221 - support active low interrupts (with bindings) - open drain mode with bindings. * htu21 - OF match table and bindings. * lsm6dsx - open drain mode with bindings * ltc2497 - add support for board file based consumer mapping. * ms5367 - OF match table and bindings. * mt7622 - binding document and OF match table. - suspend and resume support. * rpr0521 - triggered buffer support. * tsys01 - OF match table and bindings. Cleanups and minor fixes * core - fix ordering of IIO channels to entry numbers when using iio_map_array_register rather than reversing them. - use the new %pOF format specifier rather than full name for the device tree nodes. * ad7280a - fix potential issue with macro argument reuse. * ad7766 - drop a pointless NULL value check as it's done in the gpiod code. * adis16400 - unsigned -> unsigned int. * at91 adc - make some init data static to reduce code size. * at91-sama5d2 ADC - make some init data static to reduce code size. * da311 - make some init data static to reduce code size. * hid-sensor-rotation - drop an unnecessary static. * hts221 - refactor the write_with_mask code. - move the BDU configuration to probe time as there is no reason for it to change. - avoid overwriting reserved data during power-down. This is a fix, but the infrastructure need was too invasive to send it to mainline except in a merge window. It's not a regression as it was always wrong. - avoid reconfigure the sampling frequency multiple times by just doing it in the write_raw function directly. - refactor the power_on/off calls into a set_enable. - move the dry-enable logic into trig_set_state as that is the only place it was used. * ina219 - fix polling of ina226 conversion ready flag. * imx7d - add vendor name in kconfig for consistency with similar parts. * mcp3422 - Change initial channel to 0 as it feels more logical. - Check for some errors in probe. * meson-saradc - add a check of of_match_device return value. * mpu3050 - allow open drain for any interrupt type. * rockchip adc - add check on of_match_device return value. * sca3000 - drop a trailing whitespace. * stm32 adc - make array stm32h7_adc_ckmodes_spec static. * stm32 dac - fix an error message. * stm32 timers - fix clock name in docs to match reality after changes. * st_accel - explicit OF table (spi). - add missing entries to OF table (i2c). - rename of_device_id table to drop the part name. - adding missing lis3l02dq entry to bindings. - rename H3LIS331DL_DRIVER_NAME to line up with similar entries in driver. * st_gyro - explicit OF table (spi). * st_magn - explicit OF table (spi). - enable multiread for lis3mdl. * st_pressure - explicit OF table (spi). * st_sensors common. - move st_sensors_of_i2c_probe and rename to make it available for spi drivers. * tsc3472 - don't write an extra byte when writing the ATIME register. - add a link to the datasheet. * tsl2x7x - continued staging cleanups - add of_match_table. - drop redundant power_state sysfs attribute. - drop wrapper tsl2x7x_i2c_read. - clean up i2c calls made in tsl2x7x_als_calibrate. - refactor the read and write _event_value callbacks to handle additional elements. - use usleep_range instead of mdelay. - check return value from tsl2x7x_invoke_change. * zpa2326 - add some newline to the end of logging macros.
2017-07-22PM / sleep: Do not print debug messages by defaultRafael J. Wysocki
Debug messages from the system suspend/hibernation infrastructure can fill up the entire kernel log buffer in some cases and anyway they are only useful for debugging. They depend on CONFIG_PM_DEBUG, but that is set as a rule as some generally useful diagnostic facilities depend on it too. For this reason, avoid printing those messages by default, but make it possible to turn them on as needed with the help of a new sysfs attribute under /sys/power/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-17iio: Documentation: Add missing documentation for power attributeStefan Brüns
Commit c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors") introduced the in_powerY_raw attribute, but omitted the corresponding documentation. The description is correct for the INA2xx and the MAX9611 IIO drivers. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-17fpga manager: Add Altera CvP driverAnatolij Gustschin
Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-13Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "General updates: - Cleanups and additional flash support for "dataflash" driver - new driver for mchp23k256 SPI SRAM device - improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE) - refactor and improve "sub-partition" handling with TRX partition parser; partitions can now be created as sub-partitions of another partition SPINOR updates, from Cyrille Pitchen and Marek Vasut: - introduce support to the SPI 1-2-2 and 1-4-4 protocols. - introduce support to the Double Data Rate (DDR) mode. - introduce support to the Octo SPI protocols. - add support to new memory parts for Spansion, Macronix and Winbond. - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. - clean up the st_spi_fsm driver. NAND updates, from Boris Brezillon: - addition of on-die ECC support to Micron driver - addition of helpers to help drivers choose most appropriate ECC settings - deletion of dead-code (cached programming and ->errstat() hook) - make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) - change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag - support exiting 'GET STATUS' command in default ->cmdfunc() implementations - change the prototype of ->setup_data_interface() A bunch of driver related changes: - various cleanup, fixes and improvements of the MTK driver - OMAP DT bindings fixes - support for ->setup_data_interface() in the fsmc driver - support for imx7 in the gpmi driver - finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) - fix "bitflips in erased pages" handling in the ifc driver - addition of PM ops and dynamic timing configuration to the atmel driver" * tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits) Documentation: ABI: mtd: describe "offset" more precisely mtd: Fix check in mtd_unpoint() mtd: nand: mtk: release lock on error path mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead mtd: spi-nor: cqspi: remove duplicate const mtd: spi-nor: Add support for Spansion S25FL064L mtd: spi-nor: Add support for mx66u51235f mtd: nand: mtk: add ->setup_data_interface() hook mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume mtd: nand: mtk: disable ecc irq when writing page with hwecc mtd: nand: mtk: fix incorrect register setting order about ecc irq mtd: partitions: fixup some allocate_partition() whitespace mtd: parsers: trx: fix pr_err format for printing offset MAINTAINERS: Update SPI NOR subsystem git repositories mtd: extract TRX parser out of bcm47xxpart into a separated module mtd: partitions: add support for partition parsers mtd: partitions: add support for subpartitions mtd: partitions: rename "master" to the "parent" where appropriate mtd: partitions: remove sysfs files when deleting all master's partitions ...
2017-07-13Documentation: ABI: mtd: describe "offset" more preciselyRafał Miłecki
So far Linux supported only two levels of MTD devices so we didn't need a very precise description for this sysfs file. With commit 97519dc52b44a ("mtd: partitions: add support for subpartitions") there is support for a tree structure so we should have more precise description. Using "parent" and "flash device" makes it more accurate. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-07-10Merge tag 'for-f2fs-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added new features such as disk quota and statx, and modified internal bio management flow to merge more IOs depending on block types. We've also made internal threads freezeable for Android battery life. In addition to them, there are some patches to avoid lock contention as well as a couple of deadlock conditions. Enhancements: - support usrquota, grpquota, and statx - manage DATA/NODE typed bios separately to serialize more IOs - modify f2fs_lock_op/wio_mutex to avoid lock contention - prevent lock contention in migratepage Bug fixes: - fix missing load of written inode flag - fix worst case victim selection in GC - freezeable GC and discard threads for Android battery life - sanitize f2fs metadata to deal with security hole - clean up sysfs-related code and docs" * tag 'for-f2fs-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (59 commits) f2fs: support plain user/group quota f2fs: avoid deadlock caused by lock order of page and lock_op f2fs: use spin_{,un}lock_irq{save,restore} f2fs: relax migratepage for atomic written page f2fs: don't count inode block in in-memory inode.i_blocks Revert "f2fs: fix to clean previous mount option when remount_fs" f2fs: do not set LOST_PINO for renamed dir f2fs: do not set LOST_PINO for newly created dir f2fs: skip ->writepages for {mete,node}_inode during recovery f2fs: introduce __check_sit_bitmap f2fs: stop gc/discard thread in prior during umount f2fs: introduce reserved_blocks in sysfs f2fs: avoid redundant f2fs_flush after remount f2fs: report # of free inodes more precisely f2fs: add ioctl to do gc with target block address f2fs: don't need to check encrypted inode for partial truncation f2fs: measure inode.i_blocks as generic filesystem f2fs: set CP_TRIMMED_FLAG correctly f2fs: require key for truncate(2) of encrypted file f2fs: move sysfs code from super.c to fs/f2fs/sysfs.c ...
2017-07-07Merge tag 'devicetree-for-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ...
2017-07-07f2fs: introduce reserved_blocks in sysfsChao Yu
In this patch, we add a new sysfs interface, with it, we can control number of reserved blocks in system which could not be used by user, it enable f2fs to let user to configure for adjusting over-provision ratio dynamically instead of changing it by mkfs. So we can expect it will help to reserve more free space for relieving GC in both filesystem and flash device. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-06Merge tag 'for-linus-4.13-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Other than fixes and cleanups it contains: - support > 32 VCPUs at domain restore - support for new sysfs nodes related to Xen - some performance tuning for Linux running as Xen guest" * tag 'for-linus-4.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: allow userspace access during hypercalls x86: xen: remove unnecessary variable in xen_foreach_remap_area() xen: allocate page for shared info page from low memory xen: avoid deadlock in xenbus driver xen: add sysfs node for hypervisor build id xen: sync include/xen/interface/version.h xen: add sysfs node for guest type doc,xen: document hypervisor sysfs nodes for xen xen/vcpu: Handle xen_vcpu_setup() failure at boot xen/vcpu: Handle xen_vcpu_setup() failure in hotplug xen/pv: Fix OOPS on restore for a PV, !SMP domain xen/pvh*: Support > 32 VCPUs at domain restore xen/vcpu: Simplify xen_vcpu related code xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU xen: avoid type warning in xchg_xen_ulong xen: fix HYPERVISOR_dm_op() prototype xen: don't print error message in case of missing Xenstore entry arm/xen: Adjust one function call together with a variable assignment arm/xen: Delete an error message for a failed memory allocation in __set_phys_to_machine_multi() arm/xen: Improve a size determination in __set_phys_to_machine_multi()
2017-07-06Merge tag 'platform-drivers-x86-v4.13-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Introduce new bus architecture for WMI and expose BMOF data through sysfs. Correct several assumptions about WMI instance number from 1 to 0. Further fujitsu-laptop cleanups, continuing to prepare for separation into two modules. Add support for several new ideapad laptops and silead-based tablets. Various minor fixes and const cleanups. Detail summary: sony-laptop: - constify attribute_group and input index array fujitsu-laptop: - rework debugging - do not evaluate ACPI _INI methods - do not update ACPI device power status - sanitize hotkey input device identification - use strcpy to set ACPI device names and classes - remove redundant safety checks - use device-specific data in remaining module code - use device-specific data in LED-related code - explicitly pass ACPI device to call_fext_func() - track the last instantiated FUJ02E3 ACPI device - allocate fujitsu_laptop in acpi_fujitsu_laptop_add() - use device-specific data in backlight code - allocate fujitsu_bl in acpi_fujitsu_bl_add() - distinguish current uses of device-specific data msi-laptop: - constify msipf*_attribute_group eeepc-laptop: - constify platform_attribute_group toshiba_haps: - constify haps_attr_group dell-wmi-led: - Adjust instance of wmi_evaluate_method calls to 0 alienware-wmi: - Adjust instance of wmi_evaluate_method calls to 0 intel_menlow: - Add const to thermal_cooling_device_ops structure acerhdf: - Add const to thermal_cooling_device_ops structure dell-laptop: - Fix bogus keyboard backlight sysfs interface acer-wmi: - Using zero as first WMI instance number - Detect RF Button capability ideapad-laptop: - Add Y720-15IKBN to no_hw_rfkill - Add Y520-15IKBN to no_hw_rfkill - constify rfkill_ops structure - Squelch ACPI event 1 - hide unused 'touchpad_store' - Switch touchpad attribute to be RO - Add sysfs interface for touchpad state silead_dmi: - Add touchscreen info for PoV mobii wintab p800w - Add touchscreen info for Pipo W2S tablet - Add touchscreen info for GP-electronic T701 dell-rbtn: - constify rfkill_ops structures - Improve explanation about DELLABC6 samsung-laptop: - constify rfkill_ops structures panasonic-laptop: - remove unused code samsung-laptop: - Initialize loca variable dell-wmi: - Convert to the WMI bus infrastructure - Add a better description for "stealth mode" - Add a comment explaining the 0xb2 magic number wmi-bmof: - New driver to expose embedded Binary WMI MOF metadata wmi*: - Fix printing info about WDG structure - Add recent copyright statements - Require query for data blocks, rename writable to setable - Add an interface for subdrivers to access sibling devices - Bind the platform device, not the ACPI node - Add a new interface to read block data - Incorporate acpi_install_notify_handler - Instantiate all devices before adding them - Probe data objects for read and write capabilities - Split devices into types and add basic sysfs attributes - Fix error handling when creating devices - Turn WMI into a bus driver - Track wmi devices per ACPI device - Clean up acpi_wmi_add - Pass the acpi_device through to parse_wdg - Drop "Mapper (un)loaded" messages intel_cht_int33fe: - Set supplied-from property on max17047 dev intel_pmc_ipc: - Mark ipc_data_readb() as __maybe_unused topstar-laptop: - Add new device id peaq-wmi: - Add new peaq-wmi driver thinkpad_acpi: - Add a comment about 0 in module_param_call() - Join string literals back toshiba_acpi: - use memdup_user_nul" * tag 'platform-drivers-x86-v4.13-1' of git://git.infradead.org/linux-platform-drivers-x86: (67 commits) platform/x86: sony-laptop: constify attribute_group and input index array platform/x86: fujitsu-laptop: rework debugging platform/x86: fujitsu-laptop: do not evaluate ACPI _INI methods platform/x86: fujitsu-laptop: do not update ACPI device power status platform/x86: fujitsu-laptop: sanitize hotkey input device identification platform/x86: fujitsu-laptop: use strcpy to set ACPI device names and classes platform/x86: fujitsu-laptop: remove redundant safety checks platform/x86: msi-laptop: constify msipf*_attribute_group platform/x86: eeepc-laptop: constify platform_attribute_group platform/x86: toshiba_haps: constify haps_attr_group platform/x86: dell-wmi-led: Adjust instance of wmi_evaluate_method calls to 0 platform/x86: alienware-wmi: Adjust instance of wmi_evaluate_method calls to 0 platform/x86: intel_menlow: Add const to thermal_cooling_device_ops structure platform/x86: acerhdf: Add const to thermal_cooling_device_ops structure platform/x86: dell-laptop: Fix bogus keyboard backlight sysfs interface platform/x86: acer-wmi: Using zero as first WMI instance number platform/x86: ideapad-laptop: Add Y720-15IKBN to no_hw_rfkill platform/x86: ideapad-laptop: Add Y520-15IKBN to no_hw_rfkill platform/x86: silead_dmi: Add touchscreen info for PoV mobii wintab p800w platform/x86: silead_dmi: Add touchscreen info for Pipo W2S tablet ...
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-07-05Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: - a major update for AppArmor. From JJ: * several bug fixes and cleanups * the patch to add symlink support to securityfs that was floated on the list earlier and the apparmorfs changes that make use of securityfs symlinks * it introduces the domain labeling base code that Ubuntu has been carrying for several years, with several cleanups applied. And it converts the current mediation over to using the domain labeling base, which brings domain stacking support with it. This finally will bring the base upstream code in line with Ubuntu and provide a base to upstream the new feature work that Ubuntu carries. * This does _not_ contain any of the newer apparmor mediation features/controls (mount, signals, network, keys, ...) that Ubuntu is currently carrying, all of which will be RFC'd on top of this. - Notable also is the Infiniband work in SELinux, and the new file:map permission. From Paul: "While we're down to 21 patches for v4.13 (it was 31 for v4.12), the diffstat jumps up tremendously with over 2k of line changes. Almost all of these changes are the SELinux/IB work done by Daniel Jurgens; some other noteworthy changes include a NFS v4.2 labeling fix, a new file:map permission, and reporting of policy capabilities on policy load" There's also now genfscon labeling support for tracefs, which was lost in v4.1 with the separation from debugfs. - Smack incorporates a safer socket check in file_receive, and adds a cap_capable call in privilege check. - TPM as usual has a bunch of fixes and enhancements. - Multiple calls to security_add_hooks() can now be made for the same LSM, to allow LSMs to have hook declarations across multiple files. - IMA now supports different "ima_appraise=" modes (eg. log, fix) from the boot command line. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits) apparmor: put back designators in struct initialisers seccomp: Switch from atomic_t to recount_t seccomp: Adjust selftests to avoid double-join seccomp: Clean up core dump logic IMA: update IMA policy documentation to include pcr= option ima: Log the same audit cause whenever a file has no signature ima: Simplify policy_func_show. integrity: Small code improvements ima: fix get_binary_runtime_size() ima: use ima_parse_buf() to parse template data ima: use ima_parse_buf() to parse measurements headers ima: introduce ima_parse_buf() ima: Add cgroups2 to the defaults list ima: use memdup_user_nul ima: fix up #endif comments IMA: Correct Kconfig dependencies for hash selection ima: define is_ima_appraise_enabled() ima: define Kconfig IMA_APPRAISE_BOOTPARAM option ima: define a set of appraisal rules requiring file signatures ima: extend the "ima_policy" boot command line to support multiple policies ...
2017-07-04Merge tag 'for-v4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New drivers: - Linear ltc3651 charger driver - Motorola CPCAP battery fuel-gauge driver New chip/feature support: - bq27xxx: prepare for chip data setup - axp20x_battery: support max charge current setup New core features: - add Apple Brick ID type - support "supplied-from" device property for generic ACPI/pdata support - support strings for sysfs properties representing enums - introduce battery-info (backend is DT only for now) - provide reboot-mode header globally .. and misc fixes" * tag 'for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits) power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE power: supply: sbs-battery: Prevent CAPACITY_MODE races power: supply: bq24735: remove incorrect le16_to_cpu calls power: supply: sbs-battery: remove incorrect le16_to_cpu calls power: supply: cpcap-charger: Add missing power_supply_config power: supply: twl4030-charger: move allocation of iio channel to the beginning power: supply: twl4030-charger: allocate iio by devm_iio_channel_get() and fix error path power: supply: core: constify psy_tcd_ops. dt-bindings: power: supply: cpcap-battery: Add power-supplies property dt-bindings: power: supply: move max8903-charger.txt to proper location dt-bindings: power: supply: move maxim,max14656.txt to proper location power: supply: twl4030_charger: Use sysfs_match_string() helper power: reset: reboot-mode: Make include file global power: supply: axp20x_battery: add DT support for battery max constant charge current power: supply: axp20x_battery: add support for DT battery power: supply: bq27xxx: Add power_supply_battery_info support power: supply: bq27xxx: Add chip data memory read/write support power: supply: bq27xxx: Add bulk transfer bus methods dt-bindings: power: supply: bq27xxx: Add monitored-battery documentation power: supply: core: Add power_supply_prop_precharge ...
2017-07-04f2fs: fix to document fault injection option and sysfs fileChao Yu
Commit 73faec4d9935 ("f2fs: add mount option to select fault injection ratio") and Commit 087968974fcd ("f2fs: add fault injection to sysfs") forget to document mount option and sysfs file. This patch fixes to document them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-04f2fs: fix incorrect document of batched_trim_sectionsChao Yu
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-03Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ...
2017-07-03Merge tag 'driver-core-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ...
2017-07-03Merge tag 'tty-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the large tty/serial patchset for 4.13-rc1. A lot of tty and serial driver updates are in here, along with some fixups for some __get/put_user usages that were reported. Nothing huge, just lots of development by a number of different developers, full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty: serial: lpuart: add a more accurate baud rate calculation method tty: serial: lpuart: add earlycon support for imx7ulp tty: serial: lpuart: add imx7ulp support dt-bindings: serial: fsl-lpuart: add i.MX7ULP support tty: serial: lpuart: add little endian 32 bit register support tty: serial: lpuart: refactor lpuart32_{read|write} prototype tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property serial: imx-serial - move DMA buffer configuration to DT serial: imx: Enable RTSD only when needed serial: imx: Remove unused members from imx_port struct serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout serial: 8250: Fix THRE flag usage for CAP_MINI tty/serial: meson_uart: update to stable bindings dt-bindings: serial: Add bindings for the Amlogic Meson UARTs serial: Delete dead code for CIR serial ports serial: sirf: make of_device_ids const serial/mpsc: switch to dma_alloc_attrs tty: serial: Add Actions Semi Owl UART earlycon dt-bindings: serial: Document Actions Semi Owl UARTs tty/serial: atmel: make the driver DT only ...
2017-07-03Merge tag 'staging-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here's the large set of staging and iio driver patches for 4.13-rc1. After over 500 patches, we removed about 200 more lines of code than we added, not great, but we added some new IIO drivers for unsupported hardware, so it's an overall win. Also here are lots of small fixes, and some tty core api additions (with the tty maintainer's ack) for the speakup drivers, those are finally getting some much needed cleanups and are looking much better now than before. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (529 commits) staging: lustre: replace kmalloc with kmalloc_array Staging: ion: fix code style warning from NULL comparisons staging: fsl-mc: make dprc.h header private staging: fsl-mc: move mc-cmd.h contents in the public header staging: fsl-mc: move mc-sys.h contents in the public header staging: fsl-mc: fix a few implicit includes staging: fsl-mc: remove dpmng API files staging: fsl-mc: move rest of mc-bus.h to private header staging: fsl-mc: move couple of definitions to public header staging: fsl-mc: move irq domain creation prototype to public header staging: fsl-mc: turn several exported functions static staging: fsl-mc: delete prototype of unimplemented function staging: fsl-mc: delete duplicated function prototypes staging: fsl-mc: decouple the mc-bus public headers from dprc.h staging: fsl-mc: drop useless #includes staging: fsl-mc: be consistent when checking strcmp() return staging: fsl-mc: move comparison before strcmp() call staging: speakup: make function ser_to_dev static staging: ks7010: fix spelling mistake: "errror" -> "error" staging: rtl8192e: fix spelling mistake: "respose" -> "response" ...
2017-06-30of: document /sys/firmware/fdtFrank Rowand
Add ABI documentation for /sys/firmware/fdt Update contact email for /sys/firmware/devicetree/* and add mail list Signed-off-by: Frank Rowand <frank.rowand@sony.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-21IMA: update IMA policy documentation to include pcr= optionEric Richter
Commit 0260643ce "ima: add policy support for extending different pcrs" introduced a new IMA policy option "pcr=". Missing was the documentation for this option. This patch updates ima_policy to include this option, as well as an example. Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-06-20Merge tag 'usb-for-v4.13' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: changes for v4.13 merge window This time around we have a total of 57 non-merge commits. A list of most important changes follows: - Improvements to dwc3 tracing interface - Initial dual-role support for dwc3 - Improvements to how we handle DMA resources in dwc3 - A new f_uac1 implementation which much more flexible - Removal of AVR32 bits - Improvements to f_mass_storage driver
2017-06-19usb: gadget: add f_uac1 variant based on a new u_audio apiRuslan Bilovol
This patch adds a new function 'f_uac1' (f_uac1 with virtual "ALSA card") that uses recently created u_audio API. Comparing to legacy f_uac1 function implementation it doesn't require any real Audio codec to be present on the device. In f_uac1 audio streams are simply sinked to and sourced from a virtual ALSA sound card created using u_audio API. Legacy f_uac1 approach is to write audio samples directly to existing ALSA sound card f_uac1 approach is more generic/flexible one - create an ALSA sound card that represents USB Audio function and allows to be used by userspace application that may choose to do whatever it wants with the data received from the USB Host and choose to provide whatever it wants as audio data to the USB Host. f_uac1 also has capture support (gadget->host) thanks to easy implementation via u_audio. By default, capture interface has 48000kHz/2ch configuration, same as playback channel has. f_uac1 descriptors naming convention uses f_uac2 driver naming convention that makes it more common and meaningful. Comparing to f_uac1_legacy, the f_uac1 doesn't have volume/mute functionality. This is because the f_uac1 volume/mute feature unit was dummy implementation since that driver creation (2009) and never had any real volume control or mute functionality, so there is no any difference here. Since f_uac1 functionality, exposed interface to userspace (virtual ALSA card), input parameters are so different comparing to f_uac1_legacy, that there is no any reason to keep them in the same file/module, and separate function was created. g_audio can be built using one of existing UAC functions (f_uac1, f_uac1_legacy or f_uac2) Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-19usb: gadget: function: make current f_uac1 implementation legacyRuslan Bilovol
Before introducing new f_uac1 function (with virtual ALSA card) make current implementation legacy. This includes renaming of existing files, some variables, config options and documentation Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-15xen: add sysfs node for hypervisor build idJuergen Gross
For support of Xen hypervisor live patching the hypervisor build id is needed. Add a node /sys/hypervisor/properties/buildid containing the information. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-15xen: add sysfs node for guest typeJuergen Gross
Currently there is no reliable user interface inside a Xen guest to determine its type (e.g. HVM, PV or PVH). Instead of letting user mode try to determine this by various rather hacky mechanisms (parsing of boot messages before they are gone, trying to make use of known subtle differences in behavior of some instructions), add a sysfs node /sys/hypervisor/guest_type to explicitly deliver this information as it is known to the kernel. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-15doc,xen: document hypervisor sysfs nodes for xenJuergen Gross
Today only a few sysfs nodes under /sys/hypervisor/ are documented for Xen in Documentation/ABI/testing/sysfs-hypervisor-pmu. Add the remaining Xen sysfs nodes under /sys/hypervisor/ in a new file Documentation/ABI/stable/sysfs-hypervisor-xen and add the Xen specific sysfs docs to the MAINTAINERS file. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-13Documentation: ABI: sysfs-class-udc: remove duplicated entryFelipe Balbi
maximum_speed entry was duplicated. Remove one instance. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>