summaryrefslogtreecommitdiff
path: root/Documentation/ABI
AgeCommit message (Collapse)Author
2021-11-13Merge tag 'f2fs-for-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this cycle, we've applied relatively small number of patches which fix subtle corner cases mainly, while introducing a new mount option to be able to fragment the disk intentionally for performance tests. Enhancements: - add a mount option to fragmente on-disk layout to understand the performance - support direct IO for multi-partitions - add a fault injection of dquot_initialize Bug fixes: - address some lockdep complaints - fix a deadlock issue with quota - fix a memory tuning condition - fix compression condition to improve the ratio - fix disabling compression on the non-empty compressed file - invalidate cached pages before IPU/DIO writes And, we've added some minor clean-ups as usual" * tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: fix UAF in f2fs_available_free_memory f2fs: invalidate META_MAPPING before IPU/DIO write f2fs: support fault injection for dquot_initialize() f2fs: fix incorrect return value in f2fs_sanity_check_ckpt() f2fs: compress: disallow disabling compress on non-empty compressed file f2fs: compress: fix overwrite may reduce compress ratio unproperly f2fs: multidevice: support direct IO f2fs: introduce fragment allocation mode mount option f2fs: replace snprintf in show functions with sysfs_emit f2fs: include non-compressed blocks in compr_written_block f2fs: fix wrong condition to trigger background checkpoint correctly f2fs: fix to use WHINT_MODE f2fs: fix up f2fs_lookup tracepoints f2fs: set SBI_NEED_FSCK flag when inconsistent node block found f2fs: introduce excess_dirty_threshold() f2fs: avoid attaching SB_ACTIVE flag during mount f2fs: quota: fix potential deadlock f2fs: should use GFP_NOFS for directory inodes
2021-11-06Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-11-04Merge tag 'for-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Miscellaneous small fixes and improvements all over the place. Nothing stands out in particular" * tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits) power: supply: bq25890: Fix initial setting of the F_CONV_RATE field power: supply: bq25890: Fix race causing oops at boot power: supply: bq27xxx: Fix kernel crash on IRQ handler register error power: bq25890: add return values to error messages power: supply: axp288-charger: Simplify axp288_get_charger_health() power: supply: axp288-charger: Remove unnecessary is_present and is_online helpers power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig power: supply: ab8500_bmdata: Use standard phandle dt-bindings: power: supply: ab8500: Standard monitored-battery power: supply: axp288_charger: Fix missing mutex_init() power: supply: max17042_battery: Prevent int underflow in set_soc_threshold power: supply: max17042_battery: Clear status bits in interrupt handler MAINTAINERS: power: supply: max17040: add entry with reviewers MAINTAINERS: power: supply: max17042: add entry with reviewers power: supply: max17040: fix null-ptr-deref in max17040_probe() power: supply: rt5033_battery: Change voltage values to µV power: supply: axp288-charger: Optimize register reading method dt-bindings: power: Bindings for Samsung batteries power: supply: cpcap-battery: use device_get_match_data() to simplify code power: supply: max17042_battery: fix typo in MAX17042_IAvg_empty ...
2021-11-04Merge tag 'driver-core-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 5.16-rc1. All of these have been in linux-next for a while now with no reported problems. Included in here are: - big update and cleanup of the sysfs abi documentation files and scripts from Mauro. We are almost at the place where we can properly check that the running kernel's sysfs abi is documented fully. - firmware loader updates - dyndbg updates - kernfs cleanups and fixes from Christoph - device property updates - component fix - other minor driver core cleanups and fixes" * tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits) device property: Drop redundant NULL checks x86/build: Tuck away built-in firmware under FW_LOADER vmlinux.lds.h: wrap built-in firmware support under FW_LOADER firmware_loader: move struct builtin_fw to the only place used x86/microcode: Use the firmware_loader built-in API firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE() firmware_loader: formalize built-in firmware API component: do not leave master devres group open after bind dyndbg: refine verbosity 1-4 summary-detail gpiolib: acpi: Replace custom code with device_match_acpi_handle() i2c: acpi: Replace custom function with device_match_acpi_handle() driver core: Provide device_match_acpi_handle() helper dyndbg: fix spurious vNpr_info change dyndbg: no vpr-info on empty queries dyndbg: vpr-info on remove-module complete, not starting device property: Add missed header in fwnode.h Documentation: dyndbg: Improve cli param examples dyndbg: Remove support for ddebug_query param dyndbg: make dyndbg a known cli param dyndbg: show module in vpr-info in dd-exec-queries ...
2021-11-04Merge tag 'char-misc-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc and other tiny driver subsystem updates for 5.16-rc1. Loads of things in here, all of which have been in linux-next for a while with no reported problems (except for one called out below.) Included are: - habanana labs driver updates, including dma_buf usage, reviewed and acked by the dma_buf maintainers - iio driver update (going through this tree not staging as they really do not belong going through that tree anymore) - counter driver updates - hwmon driver updates that the counter drivers needed, acked by the hwmon maintainer - xillybus driver updates - binder driver updates - extcon driver updates - dma_buf module namespaces added (will cause a build error in arm64 for allmodconfig, but that change is on its way through the drm tree) - lkdtm driver updates - pvpanic driver updates - phy driver updates - virt acrn and nitr_enclaves driver updates - smaller char and misc driver updates" * tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits) comedi: dt9812: fix DMA buffers on stack comedi: ni_usb6501: fix NULL-deref in command paths arm64: errata: Enable TRBE workaround for write to out-of-range address arm64: errata: Enable workaround for TRBE overwrite in FILL mode coresight: trbe: Work around write to out of range coresight: trbe: Make sure we have enough space coresight: trbe: Add a helper to determine the minimum buffer size coresight: trbe: Workaround TRBE errata overwrite in FILL mode coresight: trbe: Add infrastructure for Errata handling coresight: trbe: Allow driver to choose a different alignment coresight: trbe: Decouple buffer base from the hardware base coresight: trbe: Add a helper to pad a given buffer area coresight: trbe: Add a helper to calculate the trace generated coresight: trbe: Defer the probe on offline CPUs coresight: trbe: Fix incorrect access of the sink specific data coresight: etm4x: Add ETM PID for Kryo-5XX coresight: trbe: Prohibit trace before disabling TRBE coresight: trbe: End the AUX handle on truncation coresight: trbe: Do not truncate buffer on IRQ coresight: trbe: Fix handling of spurious interrupts ...
2021-11-03Merge tag 'drivers-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...
2021-11-02Merge tag 'docs-5.16' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "This is a relatively unexciting cycle for documentation. - Some small scripts/kerneldoc fixes - More Chinese translation work, but at a much reduced rate. - The tip-tree maintainer's handbook ...plus the usual array of build fixes, typo fixes, etc" * tag 'docs-5.16' of git://git.lwn.net/linux: (53 commits) kernel-doc: support DECLARE_PHY_INTERFACE_MASK() docs/zh_CN: add core-api xarray translation docs/zh_CN: add core-api assoc_array translation speakup: Fix typo in documentation "boo" -> "boot" docs: submitting-patches: make section about the Link: tag more explicit docs: deprecated.rst: Clarify open-coded arithmetic with literals scripts: documentation-file-ref-check: fix bpf selftests path scripts: documentation-file-ref-check: ignore hidden files coding-style.rst: trivial: fix location of driver model macros docs: f2fs: fix text alignment docs/zh_CN add PCI pci.rst translation docs/zh_CN add PCI index.rst translation docs: translations: zh_CN: memory-hotplug.rst: fix a typo docs: translations: zn_CN: irq-affinity.rst: add a missing extension block: add documentation for inflight scripts: kernel-doc: Ignore __alloc_size() attribute docs: pdfdocs: Adjust \headheight for fancyhdr docs: UML: user_mode_linux_howto_v2 edits docs: use the lore redirector everywhere docs: proc.rst: mountinfo: align columns ...
2021-11-02Merge tag 'platform-drivers-x86-v5.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Highlights: - AMD-PMC S0ix support fixes and improvements - HP-WMI support for Omen laptops - New nvidia-wmi-ec-backlight driver - New Intel ISH ECLITE driver - WMI core cleanups - Support for various new Melanox platforms - System76 Laptop support improvements - Surface Laptop Studio support and initial Surface Pro 8 support - Various other small fixes and hardware-id additions" * tag 'platform-drivers-x86-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits) platform/x86: system76_acpi: Fix input device error handling platform/x86: touchscreen_dmi: Add info for the Viglen Connect 10 tablet platform/surface: aggregator_registry: Add initial support for Surface Pro 8 platform/x86: mlx-platform: Add support for new system SGN2410 platform/x86: mlx-platform: Add BIOS attributes for CoffeeLake COMEx based systems platform/x86: mlx-platform: Extend FAN and LED configuration to support new MQM97xx systems platform/x86: asus-wmi: rename platform_profile_* function symbols platform/x86: hp-wmi: rename platform_profile_* function symbols platform/x86: amd-pmc: Drop check for valid alarm time platform/x86: amd-pmc: Downgrade dev_info message to dev_dbg platform/x86: amd-pmc: fix compilation without CONFIG_RTC_SYSTOHC_DEVICE platform/x86: system76_acpi: fix Kconfig dependencies platform/x86: barco-p50-gpio: use KEY_VENDOR for button instead of KEY_RESTART platform/x86: sony-laptop: replace snprintf in show functions with sysfs_emit platform/x86: lg-laptop: replace snprintf in show functions with sysfs_emit docs: ABI: fix documentation warning in sysfs-driver-mlxreg-io platform/x86: wmi: change notification handler type HID: surface-hid: Allow driver matching for target ID 1 devices HID: surface-hid: Use correct event registry for managing HID events platform/surface: aggregator_registry: Add support for Surface Laptop Studio ...
2021-11-02Merge tag 'thermal-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These extend the thermal trip point crossing notifications sent via netlink to contain the temperature causing the trip point to be crossed, deprecate the user space thermal governor, add new DT bindings to drivers, move ABI documentation to Documentation/ABI, fix assorted issues and clean up code. Specifics: - Constify a variable in thermal MMIO driver (Rikard Falkeborn). - Add the current temperature in the netlink message when crossing a trip point in order to prevent useless back and forth reading from userspace (Daniel Lezcano). - Add support for the 'HC' variant on PM8998 PMIC in order to support VADC channels on recent QCom boards (Bjorn Andersson). - Add support for calibration values from hardware when they are fused (Niklas Söderlund). - Fix NULL pointer dereference in the thermal_release callback when an error occurs in the thermal_zone_device_register() (Yuanzheng Song). - Fix use-after-free in __thermal_cooling_device_register() in the error path (Ziyang Xuan). - Fix compilation of the LMh driver when CONFIG_QCOM_SCM is not set (Jackie Liu). - Add timeout when reading a register that can block forever in certain circumstances in the tsens driver (Ansuel Smith). - Add DT binding for the reset lines and use them in the rockchip sensor driver (Johan Jonker). - Add new uniphier NX1 SoC temperature sensor (Kunihiko Hayashi). - Save and restore the TCC value in the int340x driver (Antoine Tenart). - Deprecate the writability of the cooling device state sysfs file and the user space governor (Daniel Lezcano). - Delete bogus length check in int340x (Dan Carpenter). - Use bitmap_zalloc/bitmap_free when applicable in intel_powerclamp (Christophe JAILLET). - Move thermal ABI documentation to Documentation/ABI (Mauro Carvalho Chehab)" * tag 'thermal-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (21 commits) thermal/core: Deprecate changing cooling device state from userspace thermal/core: Make the userspace governor deprecated thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume thermal/drivers/uniphier: Add compatible string for NX1 SoC dt-bindings: thermal: uniphier: Add binding for NX1 SoC thermal/drivers/rockchip_thermal: Allow more resets for tsadc node dt-bindings: thermal: remove redundant comments from rockchip-thermal.yaml dt-bindings: thermal: allow more resets for tsadc node in rockchip-thermal.yaml thermal/drivers/tsens: Add timeout to get_temp_tsens_valid thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM thermal/core: fix a UAF bug in __thermal_cooling_device_register() thermal/core: Fix null pointer dereference in thermal_release() thermal: rcar_gen3_thermal: Read calibration from hardware thermal: rcar_gen3_thermal: Store thcode and ptat in priv data thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings thermal: Move ABI documentation to Documentation/ABI thermal/drivers/netlink: Add the temperature when crossing a trip point thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops thermal: int340x: delete bogus length check ...
2021-11-02Merge tag 'integrity-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: "Other than the new gid IMA policy rule support and the RCU locking fix, the couple of remaining changes are minor/trivial (e.g. __ro_after_init, replacing strscpy)" * tag 'integrity-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: evm: mark evm_fixmode as __ro_after_init ima: Use strscpy instead of strlcpy ima_policy: Remove duplicate 'the' in docs comment ima: add gid support ima: fix uid code style problems ima: fix deadlock when traversing "ima_default_rules".
2021-11-02Merge tag 'net-next-for-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...
2021-10-26f2fs: introduce fragment allocation mode mount optionDaeho Jeong
Added two options into "mode=" mount option to make it possible for developers to simulate filesystem fragmentation/after-GC situation itself. The developers use these modes to understand filesystem fragmentation/after-GC condition well, and eventually get some insights to handle them better. "fragment:segment": f2fs allocates a new segment in ramdom position. With this, we can simulate the after-GC condition. "fragment:block" : We can scatter block allocation with "max_fragment_chunk" and "max_fragment_hole" sysfs nodes. f2fs will allocate 1..<max_fragment_chunk> blocks in a chunk and make a hole in the length of 1..<max_fragment_hole> by turns in a newly allocated free segment. Plus, this mode implicitly enables "fragment:segment" option for more randomness. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-10-25Merge tag 'soundwire-5.16-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.16-rc1 - Update on sysfs wildcard documentation - debugfs update for core and qcom driver - invalid slave pointer fix for bus * tag 'soundwire-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: qcom: add debugfs entry for soundwire register dump soundwire: bus: stop dereferencing invalid slave pointer ABI: sysfs-bus-soundwire-slave: use wildcards on What definitions ABI: sysfs-bus-soundwire-master: use wildcards on What definitions soundwire: debugfs: use controller id and link_id for debugfs
2021-10-22soc: aspeed: Add UART routing supportChia-Wei Wang
Add driver support for the UART routing control. Users can perform runtime configuration of the RX muxes among the UART controllers and the UART IO pins. The sysfs interface is also exported for the convenience of routing paths check and update. Signed-off-by: Oskar Senft <osk@google.com> Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Lei YU <yulei.sh@bytedance.com> Link: https://lore.kernel.org/r/20210927023053.6728-5-chiawei_wang@aspeedtech.com Link: https://lore.kernel.org/r/20211022000616.481772-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-22docs: ABI: fix documentation warning in sysfs-driver-mlxreg-ioJonathan Corbet
The use of a Sphinx list within this ABI file caused the following warning: Documentation/ABI/stable/sysfs-driver-mlxreg-io:230: WARNING: Unexpected indentation. Documentation/ABI/stable/sysfs-driver-mlxreg-io:230: WARNING: Block quote ends without a blank line; unexpected unindent. Remove the bullets to make the warning go away and get proper formatting. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-22Merge tag 'fsi-for-v5.16' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joel writes: FSI changes for v5.16 - SBEFIFO usersapce interfaces to perform FFDC (First Failure Data Capture) and detect timeouts - A fix to handle multiple messages in flight * tag 'fsi-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: sbefifo: Use interruptible mutex locking fsi: sbefifo: Add sysfs file indicating a timeout error docs: ABI: testing: Document the SBEFIFO timeout interface hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfs docs: ABI: testing: Document the OCC hwmon FFDC binary interface fsi: occ: Store the SBEFIFO FFDC in the user response buffer fsi: occ: Use a large buffer for responses hwmon: (occ) Remove sequence numbering and checksum calculation fsi: occ: Force sequence numbering per OCC
2021-10-22docs: ABI: testing: Document the SBEFIFO timeout interfaceEddie James
Add documentation for the new sysfs entry that indicates whether or not the SBE has timed out. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211019211749.38059-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-22docs: ABI: testing: Document the OCC hwmon FFDC binary interfaceEddie James
Add documentation for the new binary sysfs that will dump the SBEFIFO FFDC. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211019205307.36946-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-19block: add documentation for inflightSteffen Maier
Complements v2.6.32 commit a9327cac440b ("Seperate read and write statistics of in_flight requests") and commit 316d315bffa4 ("block: Seperate read and write statistics of in_flight requests v2"). Signed-off-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20211019130230.77594-1-maier@linux.ibm.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-10-19Merge tag 'iio-for-5.16a-split-take4' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device and feature support for the 5.16 cycle Counter subsystem changes now sent separately. This has been a busy cycle, so lots here and a few more stragglers to come next week. Big new feature in this cycle is probably output buffer support. This has been in the works for a very long time so it's great to see Mihail pick up the challenge and build upon his predecessors work to finally bring this feature to mainline. New device support ------------------ * adi,adxl313 - New driver and dt bindings for this low power accelerometer. * adi,adxl355 - New driver and dt bindings for this accelerometer. - Later series adds buffer support. * asahi-kasei,ak8975 - Minor additions to driver to support ak09916 * aspeed,aspeed-adc - Substantial rework plus feature additions to add support for the ast2600 including a new dt bindings doc. * atmel,at91_sama5d2 - Rework and support introduced for the sama7g5 parts. * maxim,max31865 - New driver and bindings for this RTD temperature sensor chip. * nxp,imx8qxp - New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc. * senseair,sunrise - New driver and bindings for this family of carbon dioxide gas sensors. * sensiron,scd4x - New driver and bindings for this carbon dioxide gas sensor. New features ------------ * Output buffer support. Works in a similar fashion to input buffers, but in this case userspace pushes data into the kfifo which is then drained to the device when a trigger occurs. Support added to the ad5766 DAC driver. * Core, devm_iio_map_array_register() to avoid need for devm_add_action_or_reset() based cleanup in fully managed allocation drivers. * Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a few drivers where it really hard to ensure the correct data alignment in an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce buffer so should be avoided whenever possible. Used in the ti,adc108s102, invense,mpu3050 and adi,adis16400. This closes the last known set of drivers with alignment issues at this interface. * maxim,max1027 - Substantial rework to this driver main target of which was supporting use of other triggers than it's own EOC interrupt. - Transfer optimization. * nxp,fxls8962af - Threshold even support including using it as a wakeup source. Cleanups, minor fixes etc ------------------------- Chances of a common type to multiple drivers: * devm_ conversion and drop of .remove() callbacks in: - adi,ad5064 - adi,ad7291 - adi,ad7303 - adi,ad7746 - adi,ad9832 - adi,adis16080 - dialog,da9150-gpadc - intel,mrfld_adc - marvell,berlin2 - maxim,max1363 - maxim,max44000 - nuvoton,nau7802 - st_sensors (includes a lot of rework!) - ti,ads8344 - ti,lp8788 * devm_platform_ioremap_resource() used to reduce boilerplate - cirrus,ep93xx - rockchip,saradc - stm,stm32-dac * Use dev_err_probe() in more places to both not print on deferred probe and ensure a reason for the deferral is available for debug purposes. - adi,ad8801 - capella,cm36651 - linear,ltc1660 - maxim,ds4424 - maxim,max5821 - microchip,mcp4922 - nxp,lpc18xx - onnn,noa1305 - st,lsm9ds0 - st,st_sensors - st,stm32-dac - ti,afe4403 - ti,afe4404 - ti,dac7311 * Drop error returns in SPI and I2C remove() functions as they are ignored and long term plan is to change these all over to returning void. In some cases these patches just make it 'obvious' they always return 0 where it was the case before but not easy to tell. - adi,ad5380 - adi,ad5446 - adi,ad5686 - adi,ad5592r - bosch,bma400 - bosch,bmc150 - fsl,mma7455 - honeywell,hmc5843 - kionix,kxsd9 - maxim,max5487 - meas,ms5611 - ti,afe4403 Driver specific changes * adi,ad5770r - Bring driver inline with documented bindings. * adi,ad7746 - Trivial style fix * adi,ad7949 - Express some magic values as the underlying parts via new #defines. - Make it work with SPI controllers that don't support 14 or 16 bit messages - Support selection of voltage reference from dt including expanding the dt-bindings to cover this new functionality. * adi,ad799x - Implement selection of external reference voltage on AD7991, AD7995 and AD7999. - Add missing dt-bindings doc for devices supported by this driver. * adi,adislib - Move interrupt startup to better location in startup flow. - Handle devices that cannot mask/unmask the drdy pin and must instead mask at the interrupt controller. Applies to the adis16460 and adis16475 from which we then drop equivalent code. * adi,ltc2983 - Add support for optional reset pin. - Fail to probe if no channels specified in dt binding. * asahi-kasei,ak8975 - dt-binding additions of missing vid-supply regulator. * aspeed,aspeed-adc - Typo fix. * fsl,mma7660 - Mark acpi_device_id table __maybe_unused to avoid build warning. * fsl,imx25-gcq - Avoid initializing regulators that aren't used. * invensense,mpu3050 - Drop a dead protection against a clash with the old input driver. * invensense,mpu6050 - Rework code to not use strcpy() and hence avoid possibility of wrong sized buffers. Note this wasn't a bug, but the new code is a lot more readable. - Mark acpi_device_id table __maybe_unused to avoid build warning. * kionix,kxcjk1013 - dt-binding addition to note it supports interrupts. * marvell,berlin2-adc - Enable COMPILE_TEST building. * maxim,max1027 - Avoid returning success in an error path. * nxp,imx8qxp - Fix warning when runtime pm not enabled via __maybe_unused. * ricoh,rn5t618 - Use the new devm_iio_map_array_register() instead of open coding the same. * samsung,exynos_adc - Improve kconfig help text. * st,lsm6dsx - Move max_fifo_size into the fifo_ops structure where the other configuration parameters are found. * st,st_sensors: - Reorder to ensure we turn the power off after removing userspace interfaces. * senseair,sunrise - Add missing I2C dependency. * ti,twl6030 - Small code tidy up. * tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (148 commits) iio: imx8qxp-adc: mark PM functions as __maybe_unused iio: pressure: ms5611: Make ms5611_remove() return void iio: potentiometer: max5487: Don't return an error in .remove() iio: magn: hmc5843: Make hmc5843_common_remove() return void iio: health: afe4403: Don't return an error in .remove() iio: dac: ad5686: Make ad5686_remove() return void iio: dac: ad5592r: Make ad5592r_remove() return void iio: dac: ad5446: Make ad5446_remove() return void iio: dac: ad5380: Make ad5380_remove() return void iio: accel: mma7455: Make mma7455_core_remove() return void iio: accel: kxsd9: Make kxsd9_common_remove() return void iio: accel: bmi088: Make bmi088_accel_core_remove() return void iio: accel: bmc150: Make bmc150_accel_core_remove() return void iio: accel: bma400: Make bma400_remove() return void drivers:iio:dac:ad5766.c: Add trigger buffer iio: triggered-buffer: extend support to configure output buffers iio: kfifo-buffer: Add output buffer support iio: Add output buffer support iio: documentation: Document scd4x calibration use drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor ...
2021-10-19Documentation/ABI: Add new line card attributes for mlxreg-io sysfs interfacesVadim Pasternak
Add documentation for the new attributes for line cards: - CPLDs versioning. - Write protection control for 'nvram' devices. - Line card reset reasons. - Enabling burning of FPGA and CPLDs. - Enabling burning of FPGA and gearbox SPI flashes, - Enabling power of whole line card. - Enabling power of QSFP ports equipped on line card. - The maximum powered required for line card feeding. - Line card configuration Id. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20211002093238.3771419-10-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-19Documentation/ABI: Add new attributes for mlxreg-io sysfs interfacesVadim Pasternak
Add documentation for the new attributes: - "bios_active_image"; "bios_auth_fail"; "bios_upgrade_fail"; "bios_safe_mode" to represent various BIOS statuses. - "lc{n}_enable" - for put/release the line card to/from enable state. - "lc{n}_pwr" - for power on/off the line card. - "lc{n}_rst_mask" - for line card reset state enforced by ASIC, when it sets it due to some abnormal ASIC behavior. - "psu3_on"; "psu4_on" - for connection/disconnection power supply unit to/from the power source. - "pm_mgmt_en" - for setting power management control ownership. When power management control is provided by hardware, it means that hardware will automatically power off one or more line cards in case system power budget is under power required for feeding all powered on line cards. It could be a case, when some of power units lost power good state. - "shutdown_unlock" - for unlocking system after hardware or firmware thermal shutdown, which causes locking of the all interfaces to ASIC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20211002093238.3771419-9-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-19Merge tag 'misc-habanalabs-next-2021-10-18' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next Oded writes: This tag contains habanalabs driver changes for v5.16: - Add a new uAPI (under the memory ioctl) to request from the driver to export a DMA-BUF object that represents a memory region on the device's DRAM. This is needed to enable peer-to-peer over PCIe between habana device and an RDMA adapter (e.g. mlnx5 or efa rdma adapter). - Add debugfs node to dynamically configure CS timeout. Up until now, it was only configurable through kernel module parameter. - Fetch more comprehensive power information from the firmware. - Always take timestamp when waiting for user interrupt, as the user needs that information to optimize the graph runtime compilation. - Modify user interrupt to look on 64-bit user value as fence, instead of 32-bit. - Bypass reset in case of repeated h/w error event after device reset. This is to prevent endless loop of resets to the device. - Fix several bugs in multi CS completion code. - Fix race condition in fd close/open. - Update to latest firmware headers - Add select CRC32 in kconfig - Small fixes, cosmetics * tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (25 commits) habanalabs: refactor fence handling in hl_cs_poll_fences habanalabs: context cleanup cosmetics habanalabs: simplify wait for interrupt with timestamp flow habanalabs: initialize hpriv fields before adding new node habanalabs: Unify frequency set/get functionality habanalabs: select CRC32 habanalabs: add support for dma-buf exporter habanalabs: define uAPI to export FD for DMA-BUF habanalabs: fix NULL pointer dereference habanalabs: fix race condition in multi CS completion habanalabs: use only u32 habanalabs: update firmware files habanalabs: bypass reset for continuous h/w error event habanalabs: take timestamp on wait for interrupt habanalabs: prevent race between fd close/open habanalabs: refactor reset log message habanalabs: define soft-reset as inference op habanalabs: fix debugfs device memory MMU VA translation habanalabs: add support for a long interrupt target value habanalabs: remove redundant cs validity checks ...
2021-10-19iio: documentation: Document scd4x calibration useRoan van Dijk
Add entries from Documentation/ABI/testing/sysfs-bus-iio-scd30 to Documentation/ABI/testing/sysfs-bus-iio. The attributes of the scd4x and scd30 are common. Remove Documentation/ABI/testing/sysfs-bus-iio-scd30. Signed-off-by: Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20211008101706.755942-5-roan@protonic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: ABI: Document in_concentration_co2_scaleJacopo Mondi
Document the 'in_concentration_co2_scale' standard IIO attribute. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Link: https://lore.kernel.org/r/20210920135413.140310-5-jacopo+renesas@jmondi.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: ABI: docs: Document Senseair Sunrise ABIJacopo Mondi
Add documentation for the sysfs attributes of the sunrise_co2 driver. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Link: https://lore.kernel.org/r/20210920135413.140310-3-jacopo+renesas@jmondi.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-18PCI: Document /sys/bus/pci/devices/.../irqBarry Song
Document /sys/bus/pci/devices/.../irq. This file contains the IRQ of the INTx interrupt (or zero if the device doesn't support INTx interrupts). If the device has enabled MSI (not MSI-X), it contains the first MSI IRQ instead. This is a historical mistake because devices may support several MSI or MSI-X vectors, and this file can't contain them all. But we preserve this behavior to avoid breaking userspace. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20210825102636.52757-2-21cnbao@gmail.com Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18habanalabs: add debugfs node for configuring CS timeoutOfir Bitton
Command submission timeout is currently determined during driver loading time. As some environments requires this timeout to be modified in runtime, we introduce a new debugfs node that controls the timeout value without the need to reload the driver. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-10-17counter: Implement events_queue_size sysfs attributeWilliam Breathitt Gray
The events_queue_size sysfs attribute provides a way for users to dynamically configure the Counter events queue size for the Counter character device interface. The size is in number of struct counter_event data structures. The number of elements will be rounded-up to a power of 2 due to a requirement of the kfifo_alloc function called during reallocation of the queue. Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/c914b2db2ea0a2637633bcc3e86ded3c94783f2e.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Implement *_component_id sysfs attributesWilliam Breathitt Gray
The Generic Counter chrdev interface expects users to supply component IDs in order to select extensions for requests. In order for users to know what component ID belongs to which extension this information must be exposed. The *_component_id attribute provides a way for users to discover what component ID belongs to which respective extension. Cc: David Lechner <david@lechnology.com> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/8961a11edbb882fc689e468194f5be75f572443e.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17counter: Implement signalZ_action_component_id sysfs attributeWilliam Breathitt Gray
The Generic Counter chrdev interface expects users to supply component IDs in order to select Synapses for requests. In order for users to know what component ID belongs to which Synapse this information must be exposed. The signalZ_action_component_id attribute provides a way for users to discover what component ID belongs to the respective Synapse. Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/a6c81b2f1f5d0b8d59b1ebe4f0fed04914b07547.1632884256.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17docs: counter: Update to reflect sysfs internalizationWilliam Breathitt Gray
The Counter subsystem architecture and driver implementations have changed in order to handle Counter sysfs interactions in a more consistent way. This patch updates the Generic Counter interface documentation to reflect the changes. Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/91cded13c0145c0d3d0acfe765a2ccb6c9af7c3b.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-15topology: Represent clusters of CPUs within a dieJonathan Cameron
Both ACPI and DT provide the ability to describe additional layers of topology between that of individual cores and higher level constructs such as the level at which the last level cache is shared. In ACPI this can be represented in PPTT as a Processor Hierarchy Node Structure [1] that is the parent of the CPU cores and in turn has a parent Processor Hierarchy Nodes Structure representing a higher level of topology. For example Kunpeng 920 has 6 or 8 clusters in each NUMA node, and each cluster has 4 cpus. All clusters share L3 cache data, but each cluster has local L3 tag. On the other hand, each clusters will share some internal system bus. +-----------------------------------+ +---------+ | +------+ +------+ +--------------------------+ | | | CPU0 | | cpu1 | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ cluster | | tag | | | | | CPU2 | | CPU3 | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +----+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | L3 | | data | +-----------------------------------+ | | | +------+ +------+ | +-----------+ | | | | | | | | | | | | | +------+ +------+ +----+ L3 | | | | | | tag | | | | +------+ +------+ | | | | | | | | | | | +-----------+ | | | +------+ +------+ +--------------------------+ | +-----------------------------------| | | +-----------------------------------| | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ | | tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +---+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +--+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | +---------+ +-----------------------------------+ That means spreading tasks among clusters will bring more bandwidth while packing tasks within one cluster will lead to smaller cache synchronization latency. So both kernel and userspace will have a chance to leverage this topology to deploy tasks accordingly to achieve either smaller cache latency within one cluster or an even distribution of load among clusters for higher throughput. This patch exposes cluster topology to both kernel and userspace. Libraried like hwloc will know cluster by cluster_cpus and related sysfs attributes. PoC of HWLOC support at [2]. Note this patch only handle the ACPI case. Special consideration is needed for SMT processors, where it is necessary to move 2 levels up the hierarchy from the leaf nodes (thus skipping the processor core level). Note that arm64 / ACPI does not provide any means of identifying a die level in the topology but that may be unrelate to the cluster level. [1] ACPI Specification 6.3 - section 5.2.29.1 processor hierarchy node structure (Type 0) [2] https://github.com/hisilicon/hwloc/tree/linux-cluster Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210924085104.44806-2-21cnbao@gmail.com
2021-10-12scsi: Documentation: Fix typo in sysfs-driver-ufsSohaib Mohamed
Remove repeated word: "the The amount" Link: https://lore.kernel.org/r/20211006154804.135184-1-sohaib.amhmd@gmail.com Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-11ABI: sysfs-platform-intel-pmc: add blank lines to make it valid for ReSTMauro Carvalho Chehab
The ReST format requires blank lines before/after identation changes, for it to properly detect lists. Fixes: ee7abc105e2b ("platform/x86: intel_pmc_core: export platform global reset bits via etr3 sysfs file") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3673e1a255ad4100c933af215b60d68ba126f820.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11ABI: sysfs-platform-dell-privacy-wmi: correct ABI entriesMauro Carvalho Chehab
As described at Documentation/ABI/README doesn't contain an Attribute: field. The way sysfs ABI is supposed to work is that each different attribute would have a separate file. So, the right way to map this would be like: /sys/.../dell_privacy_supported_type/mic_mute /sys/.../dell_privacy_supported_type/camera_shutter /sys/.../dell_privacy_current_state/mic_mute /sys/.../dell_privacy_current_state/camera_shutter However, it seems to late to fix that, as this was merged already on Kernel 5.13, and a change right now would be a regression. So, instead, let's at least fix the entry to match the expected format. While here, fix the format of the contact, which is not a valid e-mail URL. This should also fix the current warnings produced when building the docs: Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:35: WARNING: Unexpected indentation. Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:2: WARNING: Unexpected indentation. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/42846621fdf2bf206feb114d06b14cbc47475fb5.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-09ima: add gid supportCurtis Veit
IMA currently supports the concept of rules based on uid where the rule is based on the uid of the file owner or the uid of the user accessing the file. Provide the ability to have similar rules based on gid. Signed-off-by: Curtis Veit <veit@vpieng.com> Co-developed-by: Alex Henrie <alexh@vpitech.com> Signed-off-by: Alex Henrie <alexh@vpitech.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-10-07thermal: Move ABI documentation to Documentation/ABIMauro Carvalho Chehab
The thermal ABI and the internal development details are described in: Documentation/driver-api/thermal/sysfs-api.rst Move the sysfs ABI description to Documentation/ABI, ensuring that scripts/get_abi.pl will properly parse it. While here, also update the thermal record in MAINTAINERS to point to the documentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ rjw: Changelog end subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05ABI: sysfs-devices-system-cpu: use cpuX instead of cpu#Mauro Carvalho Chehab
Some What entries here use cpu# as a wildcard, while others use, instead, cpuX. As scripts/get_abi.pl doesn't consider "#" as a wildcard, replace: cpu# -> cpuX inside the file. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/60b1a79189d1a9d9f1c9c9c299770e69b18972fd.1632994837.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05ABI: sysfs-class-extcon: use uppercase X for wildcardsMauro Carvalho Chehab
Uppercase letters X, Y and Z are handled as wildcards by scripts/get_abi.pl. We can't do that with lowercase letters, as they're used everywhere. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/2dfd3f80cea2d0501f6451f2e66000b00fda3346.1632994837.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05ABI: sysfs-class-hwmon: add a description for tempY_crit_alarmMauro Carvalho Chehab
Such ABI symbol is currently not described. Document it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/a14f98e1b23ea14cf14da3c3169955343ec28bbe.1632994837.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05ABI: sysfs-class-hwmon: add ABI documentation for itMauro Carvalho Chehab
Move the ABI attributes documentation from: Documentation/hwmon/sysfs-interface.rst in order for it to follow the usual ABI documentation. That allows script/get_abi.pl to properly handle it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5f47619ed882b0b8d1c84b56f7ea17bac0854b77.1632994837.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05ABI: sysfs-mce: add 3 missing filesMauro Carvalho Chehab
Changeset 62fdac5913f7 ("x86, mce: Add boot options for corrected errors") added three more MCE files that are also exposed currently via sysfs. Document them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/f9c13aff3f5a2cae0d4495eccd17f431f3a4c55a.1632994837.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05ABI: sysfs-mce: add a new ABI fileMauro Carvalho Chehab
Reduce the gap of missing ABIs for Intel servers with MCE by adding a new ABI file. The contents of this file comes from: Documentation/x86/x86_64/machinecheck.rst Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/801a26985e32589eb78ba4b728d3e19fdea18f04.1632994837.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-01ABI: sysfs-bus-soundwire-slave: use wildcards on What definitionsMauro Carvalho Chehab
An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/416f4a746c116147abb08fb0155a6a4ed065dfd7.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01ABI: sysfs-bus-soundwire-master: use wildcards on What definitionsMauro Carvalho Chehab
An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/eb62c19ce92c0dc1a50eb57c1052866256250644.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-09-28ABI: sysfs-bus-platform: add modalias descriptionMauro Carvalho Chehab
Define the modalias parameter for platform devices, including the ones exposed via devicetree. Acked-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/9cdebbad008886b1d09f5f3ac5d88bee19f08d97.1632750608.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-28ABI: sysfs-driver-ufs: Add another What for platform driversMauro Carvalho Chehab
The current what expressions: What: /sys/bus/platform/drivers/ufshcd/*/... Doesn't actually match what (some?) platform drivers actually export. For instance, drivers/scsi/ufs/ufs-hisi.c actually creates the sysfs struct for ufshcd inside this directory: /sys/devices/platform/soc/ff3c0000.ufs Which has those aliases: /sys/devices/virtual/devlink/platform:fff35000.crg_ctrl--platform:ff3c0000.ufs/consumer/ /sys/bus/platform/drivers/ufshcd-hisi/ff3c0000.ufs/ /sys/bus/platform/devices/soc/ff3c0000.ufs/ /sys/bus/platform/devices/ff3c0000.ufs/ So, add another What: for such files that will match the device ufs entries, e. g.: What: /sys/bus/platform/devices/*.ufs/ Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/bc61469964bbcabe38d12aa88f2734d38a8741e5.1632750608.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-28ABI: obsolete/sysfs-bus-iio: add some missing blank linesMauro Carvalho Chehab
Avoid those warnings: Documentation/ABI/obsolete/sysfs-bus-iio:171: WARNING: Unexpected indentation. Documentation/ABI/obsolete/sysfs-bus-iio:12: WARNING: Unexpected indentation. Documentation/ABI/obsolete/sysfs-bus-iio:2: WARNING: Unexpected indentation. Documentation/ABI/obsolete/sysfs-bus-iio:149: WARNING: Unexpected indentation. Fixes: caf0fb3bb38a ("iio: Documentation: move incompatible ABI to obsolete") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/602c52c3fb957b9d7d6b72292dc86d295b50c881.1632750608.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>