summaryrefslogtreecommitdiff
path: root/Documentation/ABI
AgeCommit message (Collapse)Author
2023-12-13leds: ledtrig-tty: Add additional line state evaluationFlorian Eckert
The serial tty interface also supports additional input signals, that can also be evaluated within this trigger. This change is adding the following additional input sources, which could be controlled via the '/sys/class/<leds>/' sysfs interface. Explanation: DCE = Data Communication Equipment (Modem) DTE = Data Terminal Equipment (Computer) - cts: DCE is ready to accept data from the DTE (CTS = Clear To Send). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate CTS. If set to 1, the LED will evaluate CTS. - dsr: DCE is ready to receive and send data (DSR = Data Set Ready). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate DSR. If set to 1, the LED will evaluate DSR. - dcd: DTE is receiving a carrier from the DCE (DCD = Data Carrier Detect). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate DCD. If set to 1, the LED will evaluate DCD. - rng: DCE has detected an incoming ring signal on the telephone line (RNG = Ring Indicator). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate RNG. If set to 1, the LED will evaluate RNG. Also add an invert flag on LED blink, so that the LED blinks in the correct order. * If one off the new enabled input signals are evaluatet as 'enabled', and data are transmitted, then the LED should first blink 'off' and then 'on' (invert). * If all the new enabled input signals are evaluatet as 'disabled', and data are transmitted, then the LED should first blink 'on' and then 'off'. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Maarten Brock <m.brock@vanmierlo.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231127110311.3583957-5-fe@dev.tdt.de Signed-off-by: Lee Jones <lee@kernel.org>
2023-12-13leds: ledtrig-tty: Make rx tx activitate configurableFlorian Eckert
Until now, the LED blinks when data is sent via the tty (rx/tx). This is not configurable. This change adds the possibility to make the indication for the direction of the transmitted data independently controllable via the new rx and tx sysfs entries. - rx: Signal reception (rx) of data on the named tty device. If set to 0, the LED will not blink on reception. If set to 1 (default), the LED will blink on reception. - tx: Signal transmission (tx) of data on the named tty device. If set to 0, the LED will not blink on transmission. If set to 1 (default), the LED will blink on transmission. This new sysfs entry are on by default. Thus the trigger behaves as before this change. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231127110311.3583957-4-fe@dev.tdt.de Signed-off-by: Lee Jones <lee@kernel.org>
2023-12-13docs: ABI: sysfs-class-led-trigger-netdev: Add new modes and entryDaniel Golle
Document newly introduced modes for the LED netdev trigger. Add documentation for new modes: - link_2500 - link_5000 - link_10000 Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/e72a6794639cf3881d698e1d34b456e747da1b95.1701143925.git.daniel@makrotopia.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-12-12Docs/ABI/damon: document DAMOS quota goalsSeongJae Park
Update DAMON ABI document for the newly added DAMON sysfs files and inputs for DAMOS quota goals. Link: https://lkml.kernel.org/r/20231130023652.50284-9-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-12Merge tag 'coresight-next-v6.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: Updates for Linux v6.8 Updates for the hwtracing subsystem includes : - Support for CoreSight TPDM DSB set - Support for tuning Cycle count Threshold for CoreSight ETM via perf - Support for TRBE on ACPI based systems - Support for choosing buffer mode in ETR for sysfs mode - Improvements to HiSilicon PTT driver - Cleanups to Ultrasoc SMB driver - Cleanup .remove callback for various Coresight platform drivers - Remove Leo Yan from Reviewers Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (32 commits) coresight: ultrasoc-smb: Use guards to cleanup coresight: ultrasoc-smb: Convert to platform remove callback returning void coresight: trbe: Convert to platform remove callback returning void coresight: replicator: Convert to platform remove callback returning void coresight: funnel: Convert to platform remove callback returning void coresight: etm4x: Convert to platform remove callback returning void coresight: dummy: Convert to platform remove callback returning void coresight: etm4x: Fix width of CCITMIN field coresight-tpdm: Correct the property name of MSR number hwtracing: hisi_ptt: Optimize the trace data committing hwtracing: hisi_ptt: Disable interrupt after trace end Documentation: ABI: coresight-tpdm: Fix Bit[3] description indentation coresight-tpdm: Add nodes for dsb msr support dt-bindings: arm: Add support for DSB MSR register coresight-tpdm: Add nodes for timestamp request coresight-tpdm: Add nodes to configure pattern match output coresight-tpdm: Add nodes for dsb edge control coresight-tpdm: Add node to set dsb programming mode coresight-tpdm: Add nodes to set trigger timestamp and type coresight-tpdm: Add reset node to TPDM node ...
2023-12-11iio: ABI: document temperature and humidity peak/trough raw attributesJavier Carrasco
The in_temp_peak_raw attribute is already in use, but its documentation is still missing. The in_humidityrelative_raw must be documented for a new iio user that supports this attribute. Add temp and humidityrelative use cases. When at it, remove an extra blank space in the description. For users that support minimum values, a new in_<type>_trough_raw attribute is required. Add this attribute and document the first uses of it for temp and humidityrelative types. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231211122840.9760-1-579lpy@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11doc: iio: Document intensity scale as poorly definedMarek Vasut
Add comment about intensity scale being poorly defined and having no proper units. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20231207134200.329174-1-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11ABI: sysfs-class-hwmon: document emergency/max/min temperature alarmsJavier Carrasco
These attributes are widely used in the hwmon subsystem, but they still must be documented. Add tempY_emergency_alarm, tempY_max_alarm and tempY_min_alarm to the ABI documentation according to their current usage and access rights in the hwmon subsystem. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-4-8bfb7f51145a@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11ABI: sysfs-class-hwmon: fix tempY_crit_alarm access rightsJavier Carrasco
This attribute is defined as read-only by all drivers that support it. It seems that the access rights and description for this attribute were copied from the intrusionY_alarm, which has indeed RW rights and must be cleared by the user. These are the modules that currently use this attribute: - adt7x10 - i5500_temp - jc42 - lm83 - lm90 - lm95245 - max31760 - max6621 - mc34vr500 - tmp401 - tmp464 - tmp513 Fix the attribute description and make it read-only. Fixes: 365b5d63a505 ("ABI: sysfs-class-hwmon: add a description for tempY_crit_alarm") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-3-8bfb7f51145a@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11ABI: sysfs-class-hwmon: document missing humidity attributesJavier Carrasco
All these attributes already exist and are used by the hwmon subsystem, but they still must be documented. The missing attributes are the following: - humidityY_alarm - humidityY_fault - humidityY_label - humidityY_max - humidityY_max_hyst - humidityY_min - humidityY_min_hyst Add the missing humidity attributes to the ABI documentation according to their current usage and access rights in the hwmon subsystem. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-2-8bfb7f51145a@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11ABI: sysfs-class-hwmon: rearrange humidity attributes alphabeticallyJavier Carrasco
Preliminary step to add the missing humidity attributes in the ABI documentation. Adding new elements alphabetically is a common practice that has been loosely followed in the sysfs-class-hwmon documentation. Since most of the humidity attributes must be added to the file, a single attribute needs to be rearranged to reinforce alphabetical order. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-1-8bfb7f51145a@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-08Merge tag 'soc-fixes-6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips Arm machines as well as Microchip RISC-V, and most of these address build-time warnings for spec violations and other minor issues. One of the Mediatek warnings was enabled by default and prevented a clean build. The ones that address serious runtime issues are all on the i.MX platform: - a boot time panic on imx8qm - USB hanging under load on imx8 - regressions on the imx93 ethernet phy Code fixes include a minor error handling for the i.MX PMU driver, and a number of firmware driver fixes: - OP-TEE fix for supplicant based device enumeration, and a new sysfs attribute to needed to fix a race against userspace - Arm SCMI fix for possible truncation/overflow in the frequency computations - Multiple FF-A fixes for the newly added notification support" * tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits) MAINTAINERS: change the S32G2 maintainer's email address. arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588 ARM: dts: imx28-xea: Pass the 'model' property ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry arm64: dts: imx8-apalis: set wifi regulator to always-on ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init arm64: dts: imx8ulp: update gpio node name to align with register address arm64: dts: imx93: update gpio node name to align with register address arm64: dts: imx93: correct mediamix power arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3 arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode firmware: arm_scmi: Fix frequency truncation by promoting multiplier type ...
2023-12-07doc: kunpeng_hccs: Fix incorrect email domain nameHuisong Li
The email domain name in Contact is wrong. So this patch has to modify it. Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2023-12-06Merge tag 'optee-supplicant-fix-for-v6.7' of ↵Arnd Bergmann
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes OP-TEE fix for supplicant based device enumeration Adds a sysfs attribute for devices depending on supplicant services so that the user-space service can detect and detach those devices before closing the supplicant * tag 'optee-supplicant-fix-for-v6.7' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Fix supplicant based device enumeration Link: https://lore.kernel.org/r/20231114153113.GA1310615@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-04Documentation: add debugfs description for vfioLongfang Liu
Add an debugfs document description file to help users understand how to use the accelerator live migration driver's debugfs. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/r/20231106072225.28577-3-liulongfang@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-12-04iio: add modifiers for A and B ultraviolet lightJavier Carrasco
Currently there are only two modifiers for ultraviolet light: a generic one for any ultraviolet light (IIO_MOD_LIGHT_UV) and one for deep ultraviolet (IIO_MOD_LIGHT_DUV), which is also referred as ultraviolet C (UV-C) band and covers short-wave ultraviolet. There are still no modifiers for the long-wave and medium-wave ultraviolet bands. These two bands are the main components used to obtain the UV index on the Earth's surface. Add modifiers for the ultraviolet A (UV-A) and ultraviolet B (UV-B) bands. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231110-veml6075-v3-1-6ee46775b422@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04platform/x86: Add Silicom Platform DriverHenry Shi
Add Silicom platform (silicom-platform) Linux driver for Swisscom Business Box (Swisscom BB) as well as Cordoba family products. This platform driver provides support for various functions via the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON) and device attributes. Signed-off-by: Henry Shi <henryshi2018@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20231124200334.5318-1-henryshi2018@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-01crypto: hisilicon/qm - simplify the status of qmWeili Qian
The 'QM_INIT' and 'QM_CLOSE' status of qm and 'QP_INIT' and 'QP_CLOSE' status of queue are not actually used. Currently, driver only needs to switch status when the device or queue is enabled or stopped, Therefore, remove unneeded status to simplify driver. In addition, rename'QM_START to'QM_WORK' for ease to understand. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-11-28f2fs: sysfs: support discard_io_awareChao Yu
It gives a way to enable/disable IO aware feature for background discard, so that we can tune background discard more precisely based on undiscard condition. e.g. force to disable IO aware if there are large number of discard extents, and discard IO may always be interrupted by frequent common IO. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-11-22leds: class: Don't expose color sysfs entryTakashi Iwai
The commit c7d80059b086 ("leds: class: Store the color index in struct led_classdev") introduced a new sysfs entry "color" that is commonly created for the led classdev. Unfortunately, this conflicts with the "color" sysfs entry of already existing drivers such as Logitech HID or System76 ACPI drivers. The driver probe fails due to the conflict, hence it leads to a severe regression with the missing keyboard, for example. This patch reverts partially the change in the commit above for removing the led class color sysfs entries again for addressing the regressions. The newly introduced led_classdev.color field is kept as it's already used by other driver. Fixes: c7d80059b086 ("leds: class: Store the color index in struct led_classdev") Reported-by: Johannes Penßel <johannes.penssel@gmail.com> Closes: https://lore.kernel.org/r/b5646db3-acff-45aa-baef-df3f660486fb@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=218045 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218155 Link: https://bugzilla.suse.com/show_bug.cgi?id=1217172 Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231121162359.9332-1-tiwai@suse.de Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-16iio: imu: Add driver for BMI323 IMUJagath Jog J
The Bosch BMI323 is a 6-axis low-power IMU that provide measurements for acceleration, angular rate, and temperature. This sensor includes motion-triggered interrupt features, such as a step counter, tap detection, and activity/inactivity interrupt capabilities. The driver supports various functionalities, including data ready, FIFO data handling, and events such as tap detection, step counting, and activity interrupts. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231013034808.8948-3-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16Documentation: ABI: coresight-tpdm: Fix Bit[3] description indentationBagas Sanjaya
Stephen Rothwell reported htmldocs warnings when merging coresight tree: Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm:48: ERROR: Unexpected indentation. Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm:48: WARNING: Block quote ends without a blank line; unexpected unindent. Fix indentation alignment for Bit[3] list entry in dsb_mode description to silence above warnings. Fixes: 018e43ad1eee ("coresight-tpdm: Add node to set dsb programming mode") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-next/20231017143324.75387a21@canb.auug.org.au/ Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20231017095608.136277-1-bagasdotme@gmail.com Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2023-11-16coresight-tpdm: Add nodes for dsb msr supportTao Zhang
Add the nodes for DSB subunit MSR(mux select register) support. The TPDM MSR (mux select register) interface is an optional interface and associated bank of registers per TPDM subunit. The intent of mux select registers is to control muxing structures driving the TPDM’s’ various subunit interfaces. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1695882586-10306-14-git-send-email-quic_taozha@quicinc.com
2023-11-16coresight-tpdm: Add nodes for timestamp requestTao Zhang
Add nodes to configure the timestamp request based on input pattern match. Each TPDM that support DSB subunit has maximum of n(n<7) TPR registers to configure value for timestamp request based on input pattern match. Eight 32 bit registers providing DSB interface timestamp request pattern match comparison. And each TPDM that support DSB subunit has maximum of m(m<7) TPMR registers to configure pattern mask for timestamp request. Eight 32 bit registers providing DSB interface timestamp request pattern match mask generation. Add nodes to enable/disable pattern timestamp and set pattern timestamp type. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1695882586-10306-12-git-send-email-quic_taozha@quicinc.com
2023-11-16coresight-tpdm: Add nodes to configure pattern match outputTao Zhang
Add nodes to configure trigger pattern and trigger pattern mask. Each DSB subunit TPDM has maximum of n(n<7) XPR registers to configure trigger pattern match output. Eight 32 bit registers providing DSB interface trigger output pattern match comparison. And each DSB subunit TPDM has maximum of m(m<7) XPMR registers to configure trigger pattern mask match output. Eight 32 bit registers providing DSB interface trigger output pattern match mask. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1695882586-10306-11-git-send-email-quic_taozha@quicinc.com
2023-11-16coresight-tpdm: Add nodes for dsb edge controlTao Zhang
Add the nodes to set value for DSB edge control and DSB edge control mask. Each DSB subunit TPDM has maximum of n(n<16) EDCR resgisters to configure edge control. DSB edge detection control 00: Rising edge detection 01: Falling edge detection 10: Rising and falling edge detection (toggle detection) And each DSB subunit TPDM has maximum of m(m<8) ECDMR registers to configure mask. Eight 32 bit registers providing DSB interface edge detection mask control. Add the nodes to configure DSB edge control and DSB edge control mask. Each DSB subunit TPDM maximum of 256 edge detections can be configured. The index and value sysfs files need to be paired and written to order. The index sysfs file is to set the index number of the edge detection which needs to be configured. And the value sysfs file is to set the control or mask for the edge detection. DSB edge detection control should be set as the following values. 00: Rising edge detection 01: Falling edge detection 10: Rising and falling edge detection (toggle detection) And DSB edge mask should be set as 0 or 1. Each DSB subunit TPDM has maximum of n(n<16) EDCR resgisters to configure edge control. And each DSB subunit TPDM has maximum of m(m<8) ECDMR registers to configure mask. Add the nodes to read a set of the edge control value and mask of the DSB in TPDM. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1695882586-10306-10-git-send-email-quic_taozha@quicinc.com
2023-11-16coresight-tpdm: Add node to set dsb programming modeTao Zhang
Add node to set and show programming mode for TPDM DSB subunit. Once the DSB programming mode is set, it will be written to the register DSB_CR. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1695882586-10306-9-git-send-email-quic_taozha@quicinc.com
2023-11-16coresight-tpdm: Add nodes to set trigger timestamp and typeTao Zhang
The nodes are needed to set or show the trigger timestamp and trigger type. This change is to add these nodes to achieve these function. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1695882586-10306-8-git-send-email-quic_taozha@quicinc.com
2023-11-16coresight-tpdm: Add reset node to TPDM nodeTao Zhang
TPDM device need a node to reset the configurations and status of it. This change provides a node to reset the configurations and disable the TPDM if it has been enabled. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1695882586-10306-7-git-send-email-quic_taozha@quicinc.com
2023-11-16coresight: tmc: Make etr buffer mode user configurable from sysfsAnshuman Khandual
Currently TMC-ETR automatically selects the buffer mode from all available methods in the following sequentially fallback manner - also in that order. 1. FLAT mode with or without IOMMU 2. TMC-ETR-SG (scatter gather) mode when available 3. CATU mode when available But this order might not be ideal for all situations. For example if there is a CATU connected to ETR, it may be better to use TMC-ETR scatter gather method, rather than CATU. But hard coding such order changes will prevent us from testing or using a particular mode. This change provides following new sysfs tunables for the user to control TMC-ETR buffer mode explicitly, if required. This adds following new sysfs files for buffer mode selection purpose explicitly in the user space. /sys/bus/coresight/devices/tmc_etr<N>/buf_modes_available /sys/bus/coresight/devices/tmc_etr<N>/buf_mode_preferred $ cat buf_modes_available auto flat tmc-sg catu ------------------> Supported TMC-ETR buffer modes $ echo catu > buf_mode_preferred -------> Explicit buffer mode request But explicit user request has to be within supported ETR buffer modes only. These sysfs interface files are exclussive to ETR, and hence these are not available for other TMC devices such as ETB or ETF etc. A new auto' mode (i.e ETR_MODE_AUTO) has been added to help fallback to the existing default behaviour, when user provided preferred buffer mode fails. ETR_MODE_FLAT and ETR_MODE_AUTO are always available as preferred modes. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> [Fixup year in sysfs ABI documentation] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230818082112.554638-1-anshuman.khandual@arm.com
2023-11-15scsi: ufs: ufs-sysfs: Expose UFS power infoCan Guo
Having UFS power info available in sysfs makes it easier to tell the state of the link during runtime considering we have a bunch of power saving features and various combinations for backward compatibility. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1698890324-7374-1-git-send-email-quic_cang@quicinc.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-15Merge branch 'tip/perf/urgent'Peter Zijlstra
Avoid conflicts, base on fixes. Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2023-11-13PM / devfreq: Fix buffer overflow in trans_stat_showChristian Marangi
Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error. Link: https://lore.kernel.org/all/20231024183016.14648-2-ansuelsmth@gmail.com/ Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218041 Fixes: e552bbaf5b98 ("PM / devfreq: Add sysfs node for representing frequency transition information.") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-11-05Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "vhost,virtio,vdpa: features, fixes, cleanups. vdpa/mlx5: - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK - new maintainer vdpa: - support for vq descriptor mappings - decouple reset of iotlb mapping from device reset and fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits) vdpa_sim: implement .reset_map support vdpa/mlx5: implement .reset_map driver op vhost-vdpa: clean iotlb map during reset for older userspace vdpa: introduce .compat_reset operation callback vhost-vdpa: introduce IOTLB_PERSIST backend feature bit vhost-vdpa: reset vendor specific mapping to initial state in .release vdpa: introduce .reset_map operation callback virtio_pci: add check for common cfg size virtio-blk: fix implicit overflow on virtio_max_dma_size virtio_pci: add build offset check for the new common cfg items virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit vduse: make vduse_class constant vhost-scsi: Spelling s/preceeding/preceding/g virtio: kdoc for struct virtio_pci_modern_device vdpa: Update sysfs ABI documentation MAINTAINERS: Add myself as mlx5_vdpa driver virtio-balloon: correct the comment of virtballoon_migratepage() mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK vdpa/mlx5: Update cvq iotlb mapping on ASID change vdpa/mlx5: Make iotlb helper functions more generic ...
2023-11-04Merge tag 'i3c/for-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "There are now more fixes because as stated in my previous pull request, people now have access to actual hardware. Core: - handle IBI in the proper order Drivers: - cdns: fix status register access - mipi-i3c-hci: many fixes now that the driver has been actually tested - svc: many IBI fixes, correct compatible string, fix hot join corner cases" * tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits) i3c: master: handle IBIs in order they came i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. i3c: master: svc: fix compatibility string mismatch with binding doc i3c: master: svc: fix random hot join failure since timeout error i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen i3c: master: svc: fix check wrong status register in irq handler i3c: master: svc: fix ibi may not return mandatory data byte i3c: master: svc: fix wrong data return when IBI happen during start frame i3c: master: svc: fix race condition in ibi work thread i3c: Fix typo "Provisional ID" to "Provisioned ID" i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs i3c: mipi-i3c-hci: Resume controller after aborted transfer i3c: mipi-i3c-hci: Resume controller explicitly i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa() i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt i3c: mipi-i3c-hci: Set ring start request together with enable i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler ...
2023-11-04Merge tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds
Pull CXL (Compute Express Link) updates from Dan Williams: "The main new functionality this time is work to allow Linux to natively handle CXL link protocol errors signalled via PCIe AER for current generation CXL platforms. This required some enlightenment of the PCIe AER core to workaround the fact that current generation RCH (Restricted CXL Host) platforms physically hide topology details and registers via a mechanism called RCRB (Root Complex Register Block). The next major highlight is reworks to address bugs in parsing region configurations for next generation VH (Virtual Host) topologies. The old broken algorithm is replaced with a simpler one that significantly increases the number of region configurations supported by Linux. This is again relevant for error handling so that forward and reverse address translation of memory errors can be carried out by Linux for memory regions instantiated by platform firmware. As for other cross-tree work, the ACPI table parsing code has been refactored for reuse parsing the "CDAT" structure which is an ACPI-like data structure that is reported by CXL devices. That work is in preparation for v6.8 support for CXL QoS. Think of this as dynamic generation of NUMA node topology information generated by Linux rather than platform firmware. Lastly, a number of internal object lifetime issues have been resolved along with misc. fixes and feature updates (decoders_committed sysfs ABI). Summary: - Add support for RCH (Restricted CXL Host) Error recovery - Fix several region assembly bugs - Fix mem-device lifetime issues relative to the sanitize command and RCH topology. - Refactor ACPI table parsing for CDAT parsing re-use in preparation for CXL QOS support" * tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits) lib/fw_table: Remove acpi_parse_entries_array() export cxl/pci: Change CXL AER support check to use native AER cxl/hdm: Remove broken error path cxl/hdm: Fix && vs || bug acpi: Move common tables helper functions to common lib cxl: Add support for reading CXL switch CDAT table cxl: Add checksum verification to CDAT from CXL cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute cxl: Add decoders_committed sysfs attribute to cxl_port cxl: Add cxl_decoders_committed() helper cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm cxl/core/regs: Rename phys_addr in cxl_map_component_regs() PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler cxl/pci: Disable root port interrupts in RCH mode cxl/pci: Add RCH downstream port error logging cxl/pci: Map RCH downstream AER registers for logging protocol errors cxl/pci: Update CXL error logging to use RAS register address PCI/AER: Refactor cper_print_aer() for use by CXL driver module cxl/pci: Add RCH downstream port AER register discovery ...
2023-11-04Merge tag 'tsm-for-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux Pull unified attestation reporting from Dan Williams: "In an ideal world there would be a cross-vendor standard attestation report format for confidential guests along with a common device definition to act as the transport. In the real world the situation ended up with multiple platform vendors inventing their own attestation report formats with the SEV-SNP implementation being a first mover to define a custom sev-guest character device and corresponding ioctl(). Later, this configfs-tsm proposal intercepted an attempt to add a tdx-guest character device and a corresponding new ioctl(). It also anticipated ARM and RISC-V showing up with more chardevs and more ioctls(). The proposal takes for granted that Linux tolerates the vendor report format differentiation until a standard arrives. From talking with folks involved, it sounds like that standardization work is unlikely to resolve anytime soon. It also takes the position that kernfs ABIs are easier to maintain than ioctl(). The result is a shared configfs mechanism to return per-vendor report-blobs with the option to later support a standard when that arrives. Part of the goal here also is to get the community into the "uncomfortable, but beneficial to the long term maintainability of the kernel" state of talking to each other about their differentiation and opportunities to collaborate. Think of this like the device-driver equivalent of the common memory-management infrastructure for confidential-computing being built up in KVM. As for establishing an "upstream path for cross-vendor confidential-computing device driver infrastructure" this is something I want to discuss at Plumbers. At present, the multiple vendor proposals for assigning devices to confidential computing VMs likely needs a new dedicated repository and maintainer team, but that is a discussion for v6.8. For now, Greg and Thomas have acked this approach and this is passing is AMD, Intel, and Google tests. Summary: - Introduce configfs-tsm as a shared ABI for confidential computing attestation reports - Convert sev-guest to additionally support configfs-tsm alongside its vendor specific ioctl() - Added signed attestation report retrieval to the tdx-guest driver forgoing a new vendor specific ioctl() - Misc cleanups and a new __free() annotation for kvfree()" * tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux: virt: tdx-guest: Add Quote generation support using TSM_REPORTS virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT mm/slab: Add __free() support for kvfree virt: sevguest: Prep for kernel internal get_ext_report() configfs-tsm: Introduce a shared ABI for attestation reports virt: coco: Add a coco/Makefile and coco/Kconfig virt: sevguest: Fix passing a stack buffer as a scatterlist target
2023-11-03Merge tag 'dmaengine-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: - Big pile of __counted_by attribute annotations to several structures for bounds checking of flexible arrays at run-time - Another big pile platform remove callback returning void changes - Device tree device_get_match_data() usage and dropping of_match_device() calls - Minor driver updates to pxa, idxd fsl, hisi etc drivers * tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (106 commits) dmaengine: stm32-mdma: correct desc prep when channel running dmaengine: dw-axi-dmac: Add support DMAX_NUM_CHANNELS > 16 dmaengine: xilinx: xilinx_dma: Fix kernel doc about xilinx_dma_remove() dmaengine: mmp_tdma: drop unused variable 'of_id' MAINTAINERS: Add entries for NXP(Freescale) eDMA drivers dmaengine: xilinx: xdma: Support cyclic transfers dmaengine: xilinx: xdma: Prepare the introduction of cyclic transfers dmaengine: Drop unnecessary of_match_device() calls dmaengine: Use device_get_match_data() dmaengine: pxa_dma: Annotate struct pxad_desc_sw with __counted_by dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc() dmaengine: xilinx: xdma: Use resource_size() in xdma_probe() dmaengine: fsl-dpaa2-qdma: Remove redundant initialization owner in dpaa2_qdma_driver dmaengine: Remove unused declaration dma_chan_cleanup() dmaengine: mmp: fix Wvoid-pointer-to-enum-cast warning dmaengine: qcom: fix Wvoid-pointer-to-enum-cast warning dmaengine: fsl-edma: Remove redundant dev_err() for platform_get_irq() dmaengine: ep93xx_dma: Annotate struct ep93xx_dma_engine with __counted_by dmaengine: idxd: add wq driver name support for accel-config user tool dmaengine: fsl-edma: Annotate struct struct fsl_edma_engine with __counted_by ...
2023-11-03Merge tag 'usb-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...
2023-11-03Merge tag 'tty-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ...
2023-11-03Merge tag 'char-misc-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.7-rc1. Included in here are: - IIO subsystem driver updates and additions (largest part of this pull request) - FPGA subsystem driver updates - Counter subsystem driver updates - ICC subsystem driver updates - extcon subsystem driver updates - mei driver updates and additions - nvmem subsystem driver updates and additions - comedi subsystem dependency fixes - parport driver fixups - cdx subsystem driver and core updates - splice support for /dev/zero and /dev/full - other smaller driver cleanups All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits) cdx: add sysfs for subsystem, class and revision cdx: add sysfs for bus reset cdx: add support for bus enable and disable cdx: Register cdx bus as a device on cdx subsystem cdx: Create symbol namespaces for cdx subsystem cdx: Introduce lock to protect controller ops cdx: Remove cdx controller list from cdx bus system dts: ti: k3-am625-beagleplay: Add beaglecc1352 greybus: Add BeaglePlay Linux Driver dt-bindings: net: Add ti,cc1352p7 dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax Revert "nvmem: add new config option" MAINTAINERS: coresight: Add missing Coresight files misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition uacce: make uacce_class constant ocxl: make ocxl_class constant cxl: make cxl_class constant misc: phantom: make phantom_class constant ...
2023-11-03tee: optee: Fix supplicant based device enumerationSumit Garg
Currently supplicant dependent optee device enumeration only registers devices whenever tee-supplicant is invoked for the first time. But it forgets to remove devices when tee-supplicant daemon stops running and closes its context gracefully. This leads to following error for fTPM driver during reboot/shutdown: [ 73.466791] tpm tpm0: ftpm_tee_tpm_op_send: SUBMIT_COMMAND invoke error: 0xffff3024 Fix this by adding an attribute for supplicant dependent devices so that the user-space service can detect and detach supplicant devices before closing the supplicant: $ for dev in /sys/bus/tee/devices/*; do if [[ -f "$dev/need_supplicant" && -f "$dev/driver/unbind" ]]; \ then echo $(basename "$dev") > $dev/driver/unbind; fi done Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Closes: https://github.com/OP-TEE/optee_os/issues/6094 Fixes: 5f178bb71e3a ("optee: enable support for multi-stage bus enumeration") Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jerome Forissier <jerome.forissier@linaro.org> [jw: fixed up Date documentation] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2023-11-02Merge tag 'mm-stable-2023-11-01-14-33' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series 'Fixes and cleanups to compaction' - Joel Fernandes has a patchset ('Optimize mremap during mutual alignment within PMD') which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series 'Do not try to access unaccepted memory' Adrian Hunter provides some fixups for the recently-added 'unaccepted memory' feature. To increase the feature's checking coverage. 'Plug a few gaps where RAM is exposed without checking if it is unaccepted memory' - In the series 'cleanups for lockless slab shrink' Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series 'use refcount+RCU method to implement lockless slab shrink' - David Hildenbrand contributes some maintenance work for the rmap code in the series 'Anon rmap cleanups' - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series 'mm: migrate: more folio conversion and unification' - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series 'Add and use bdev_getblk()' - In the series 'Use nth_page() in place of direct struct page manipulation' Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames - In the series 'mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO' has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code rationalization and folio conversions in the hugetlb code - Yin Fengwei has improved mlock()'s handling of large folios in the series 'support large folio for mlock' - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named 'MDWE without inheritance' - Kefeng Wang has provided the series 'mm: convert numa balancing functions to use a folio' which does what it says - In the series 'mm/ksm: add fork-exec support for prctl' Stefan Roesch makes is possible for a process to propagate KSM treatment across exec() - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use 'high bandwidth memory' in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named 'memory tiering: calculate abstract distance based on ACPI HMAT' - In the series 'Smart scanning mode for KSM' Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series 'mm: memcg: fix tracking of pending stats updates values' - In the series 'Implement IOCTL to get and optionally clear info about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU - Hugh Dickins contributed the series 'shmem,tmpfs: general maintenance', a bunch of relatively minor maintenance tweaks to this code - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series 'Handle more faults under the VMA lock'. Some rationalizations of the fault path became possible as a result - In the series 'mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()' David Hildenbrand has implemented some cleanups and folio conversions - In the series 'various improvements to the GUP interface' Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements - Andrey Konovalov has sent along the series 'kasan: assorted fixes and improvements' which does those things - Some page allocator maintenance work from Kemeng Shi in the series 'Two minor cleanups to break_down_buddy_pages' - In thes series 'New selftest for mm' Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups and an optimization to the core pagecache code - Nhat Pham has added memcg accounting for hugetlb memory in the series 'hugetlb memcg accounting' - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series 'Abstract vma_merge() and split_vma()' - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series 'Fix page_owner's use of free timestamps' - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series 'permit write-sealed memfd read-only shared mappings' - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series 'Batch hugetlb vmemmap modification operations' - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series 'Finish the create_empty_buffers() transition' - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series 'mm: PCP high auto-tuning' - Roman Gushchin has contributed the patchset 'mm: improve performance of accounted kernel memory allocations' which improves their performance by ~30% as measured by a micro-benchmark - folio conversions from Kefeng Wang in the series 'mm: convert page cpupid functions to folios' - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about kmemleak' - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series 'handle memoryless nodes more appropriately' - khugepaged conversions from Vishal Moola in the series 'Some khugepaged folio conversions'" [ bcachefs conflicts with the dynamically allocated shrinkers have been resolved as per Stephen Rothwell in https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/ with help from Qi Zheng. The clone3 test filtering conflict was half-arsed by yours truly ] * tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits) mm/damon/sysfs: update monitoring target regions for online input commit mm/damon/sysfs: remove requested targets when online-commit inputs selftests: add a sanity check for zswap Documentation: maple_tree: fix word spelling error mm/vmalloc: fix the unchecked dereference warning in vread_iter() zswap: export compression failure stats Documentation: ubsan: drop "the" from article title mempolicy: migration attempt to match interleave nodes mempolicy: mmap_lock is not needed while migrating folios mempolicy: alloc_pages_mpol() for NUMA policy without vma mm: add page_rmappable_folio() wrapper mempolicy: remove confusing MPOL_MF_LAZY dead code mempolicy: mpol_shared_policy_init() without pseudo-vma mempolicy trivia: use pgoff_t in shared mempolicy tree mempolicy trivia: slightly more consistent naming mempolicy trivia: delete those ancient pr_debug()s mempolicy: fix migrate_pages(2) syscall return nr_failed kernfs: drop shared NUMA mempolicy hooks hugetlbfs: drop shared NUMA mempolicy pretence mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets() ...
2023-11-02Merge tag 'v6.7-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ...
2023-11-02Merge tag 'leds-next-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "Core Frameworks: - Add support for a bunch more colours New Drivers: - Add support for Kinetic KTD2026/7 RGB/White LEDs New Functionality: - Add support for device to enter HW Controlled Mode to Turris Omnia LEDs - Add support for HW Gamma Correction to Turris Omnia LEDs Fix-ups: - Apply new __counted_by() annotation to several data structures containing flexible arrays - Rid the return value from Platform's .remove() operation - Use *_cansleep() variants for instances were threads can sleep - Improve the semantics when setting the brightness - Generic clean-ups; code reduction, coding style, standard patterns - Replace strncpy() with strscpy() - Fix-up / add various documentation - Re-author the GPIO associated Trigger to use trigger-sources - Move to using standard APIs and helpers - Improve error checking - Stop using static GPIO bases Bug Fixes: - Fix Pointer to Enum casing warnings - Do not pretend that I2C backed device supports SMBUS - Ensure PWM LEDs are extinguished when disabled, rather than held in a state - Fix 'output may be truncated' warnings" * tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (43 commits) leds: lp5521: Add an error check in lp5521_post_init_device leds: gpio: Update headers leds: gpio: Remove unneeded assignment leds: gpio: Move temporary variable for struct device to gpio_led_probe() leds: gpio: Refactor code to use devm_gpiod_get_index_optional() leds: gpio: Utilise PTR_ERR_OR_ZERO() leds: gpio: Keep driver firmware interface agnostic leds: core: Refactor led_update_brightness() to use standard pattern leds: turris-omnia: Fix brightness setting and trigger activating leds: sc27xx: Move mutex_init() down leds: trigger: netdev: Move size check in set_device_name leds: Add ktd202x driver dt-bindings: leds: Add Kinetic KTD2026/2027 LED leds: core: Add more colors from DT bindings to led_colors dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME) leds: tca6507: Don't use fixed GPIO base leds: lp3952: Convert to use maple tree register cache leds: lm392x: Convert to use maple tree register cache leds: aw200xx: Convert to use maple tree register cache leds: lm3601x: Convert to use maple tree register cache ...
2023-11-02Merge tag 'mfd-next-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Allow all MFD Cell properties to be filled in dynamically at runtime - Skip disabled device nodes and continue to look for subsequent devices New Device Support: - Add support for Lunar Lake-M PCI to Intel LPSS PCI - Add support for Denverton to Intel ICH LPC New Functionality: - Add support for Clocks to Texas Instruments TWL* Core - Add support for Interrupts to STMicroelectronics STM32 Timers Fix-ups: - Convert to new devm-* (managed) power-off API - Remove superfluous code - Bunch of Device Tree additions, conversions and adaptions - Simplify obtaining resources (memory, device data) using unified API helpers - Trivial coding-style / spelling type clean-ups - Constify / staticify changes - Expand or edit on existing documentation - Convert some Regmap configurations to use the Maple Tree cache - Apply new __counted_by() annotation to several data structures containing flexible arrays - Replace strncpy() with strscpy() Bug Fixes: - Remove double put creating reference imbalances - Ensure headphone/lineout detection gets set when booting with ACPI" * tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) mfd: lpc_ich: Mark *_gpio_offsets data with const spmi: rename spmi device lookup helper spmi: document spmi_device_from_of() refcounting dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema mfd: rk8xx: Add support for RK806 power off mfd: rk8xx: Add support for standard system-power-controller property dt-bindings: mfd: rk806: Allow system-power-controller property dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller dt-bindings: mfd: max8925: Convert to DT schema format mfd: Use i2c_get_match_data() in a selection of drivers mfd: Use device_get_match_data() in a bunch of drivers mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data() mfd: motorola-cpcap: Drop unnecessary of_match_device() call mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL() mfd: qcom-spmi-pmic: Fix revid implementation mfd: qcom-spmi-pmic: Fix reference leaks in revid helper mfd: intel-m10-bmc: Change contact for ABI docs mfd: max8907: Convert to use maple tree register cache mfd: max77686: Convert to use maple tree register cache ...
2023-11-01Merge tag 'docs-6.7' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "The number of commits for documentation is not huge this time around, but there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations - The much-discussed documentation of the confidential-computing threat model - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn - A large traditional-Chinese documentation update - A new document on backporting and conflict resolution - Some kernel-doc and Sphinx fixes Plus the usual smattering of smaller updates and typo fixes" * tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits) scripts/kernel-doc: Fix the regex for matching -Werror flag docs: backporting: address feedback Documentation: driver-api: pps: Update PPS generator documentation speakup: Document USB support doc: blk-ioprio: Bring the doc in line with the implementation docs: usb: fix reference to nonexistent file in UVC Gadget docs: doc-guide: mention 'make refcheckdocs' Documentation: fix typo in dynamic-debug howto scripts/kernel-doc: match -Werror flag strictly Documentation/sphinx: Remove the repeated word "the" in comments. docs: sparse: add SPDX-License-Identifier docs/zh_CN: Add subsystem-apis Chinese translation docs/zh_TW: update contents for zh_TW docs: submitting-patches: encourage direct notifications to commenters docs: add backporting and conflict resolution document docs: move riscv under arch docs: update link to powerpc/vmemmap_dedup.rst mm/memory-hotplug: fix typo in documentation docs: move powerpc under arch PCI: Update the devres documentation regarding to pcim_*() ...
2023-11-01Merge tag 'asm-generic-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture
2023-11-01Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - AMD adds some more upcoming HW platforms - Intel made Meteorlake stable and started adding Lunarlake - nouveau has a bunch of display rework in prepartion for the NVIDIA GSP firmware support - msm adds a7xx support - habanalabs has finished migration to accel subsystem Detail summary: kernel: - add initial vmemdup-user-array core: - fix platform remove() to return void - drm_file owner updated to reflect owner - move size calcs to drm buddy allocator - let GPUVM build as a module - allow variable number of run-queues in scheduler edid: - handle bad h/v sync_end in EDIDs panfrost: - add Boris as maintainer fbdev: - use fb_ops helpers more - only allow logo use from fbcon - rename fb_pgproto to pgprot_framebuffer - add HPD state to drm_connector_oob_hotplug_event - convert to fbdev i/o mem helpers i915: - Enable meteorlake by default - Early Xe2 LPD/Lunarlake display enablement - Rework subplatforms into IP version checks - GuC based TLB invalidation for Meteorlake - Display rework for future Xe driver integration - LNL FBC features - LNL display feature capability reads - update recommended fw versions for DG2+ - drop fastboot module parameter - added deviceid for Arrowlake-S - drop preproduction workarounds - don't disable preemption for resets - cleanup inlines in headers - PXP firmware loading fix - Fix sg list lengths - DSC PPS state readout/verification - Add more RPL P/U PCI IDs - Add new DG2-G12 stepping - DP enhanced framing support to state checker - Improve shared link bandwidth management - stop using GEM macros in display code - refactor related code into display code - locally enable W=1 warnings - remove PSR watchdog timers on LNL amdgpu: - RAS/FRU EEPROM updatse - IP discovery updatses - GC 11.5 support - DCN 3.5 support - VPE 6.1 support - NBIO 7.11 support - DML2 support - lots of IP updates - use flexible arrays for bo list handling - W=1 fixes - Enable seamless boot in more cases - Enable context type property for HDMI - Rework GPUVM TLB flushing - VCN IB start/size alignment fixes amdkfd: - GC 10/11 fixes - GC 11.5 support - use partial migration in GPU faults radeon: - W=1 Fixes - fix some possible buffer overflow/NULL derefs nouveau: - update uapi for NO_PREFETCH - scheduler/fence fixes - rework suspend/resume for GSP-RM - rework display in preparation for GSP-RM habanalabs: - uapi: expose tsc clock - uapi: block access to eventfd through control device - uapi: force dma-buf export to PAGE_SIZE alignments - complete move to accel subsystem - move firmware interface include files - perform hard reset on PCIe AXI drain event - optimise user interrupt handling msm: - DP: use existing helpers for DPCD - DPU: interrupts reworked - gpu: a7xx (a730/a740) support - decouple msm_drv from kms for headless devices mediatek: - MT8188 dsi/dp/edp support - DDP GAMMA - 12 bit LUT support - connector dynamic selection capability rockchip: - rv1126 mipi-dsi/vop support - add planar formats ast: - rename constants panels: - Mitsubishi AA084XE01 - JDI LPM102A188A - LTK050H3148W-CTA6 ivpu: - power management fixes qaic: - add detach slice bo api komeda: - add NV12 writeback tegra: - support NVSYNC/NHSYNC - host1x suspend fixes ili9882t: - separate into own driver" * tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits) drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo drm/amdgpu: Remove duplicate fdinfo fields drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table drm/amdgpu: Identify data parity error corrected in replay mode drm/amdgpu: Fix typo in IP discovery parsing drm/amd/display: fix S/G display enablement drm/amdxcp: fix amdxcp unloads incompletely drm/amd/amdgpu: fix the GPU power print error in pm info drm/amdgpu: Use pcie domain of xcc acpi objects drm/amd: check num of link levels when update pcie param drm/amdgpu: Add a read to GFX v9.4.3 ring test drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported. drm/amdgpu: get RAS poison status from DF v4_6_2 drm/amdgpu: Use discovery table's subrevision drm/amd/display: 3.2.256 drm/amd/display: add interface to query SubVP status drm/amd/display: Read before writing Backlight Mode Set Register drm/amd/display: Disable SYMCLK32_SE RCO on DCN314 ...
2023-11-01vdpa: Update sysfs ABI documentationShawn.Shao
Fix the wrong drivers_autoprobe path name in the document Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com> Message-Id: <20230821011535.1117-1-shawn.shao@jaguarmicro.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-09 08:30:02 +0000