| Age | Commit message (Collapse) | Author |
|---|
|
The compatible strings for mt6795 clocks are also documented in other
schemas:
"mediatek,mt6795-apmixedsys" in clock/mediatek,apmixedsys.yaml
"mediatek,mt6795-topckgen" in clock/mediatek,topckgen.yaml
"mediatek,mt6795-pericfg" in clock/mediatek,pericfg.yaml
"mediatek,mt6795-infracfg" in clock/mediatek,infracfg.yaml
The only difference is #reset-cells is not allowed in some of these,
but that aligns with actual users in .dts files.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240910234238.1028422-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
"make dtbs_check":
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,shutdown' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,output-enable-active' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
Versaclock 5 clock generators can have their configuration stored in
One-Time Programmable (OTP) memory. Hence there is no need to specify
DT properties for manual configuration if the OTP has been programmed
before. Likewise, the Linux driver does not touch the SD/OE bits if the
corresponding properties are not specified, cfr. commit d83e561d43bc71e5
("clk: vc5: Add properties for configuring SD/OE behavior").
Reflect this in the bindings by making the "idt,shutdown" and
"idt,output-enable-active" properties not required, just like the
various "idt,*" properties in the per-output child nodes.
Fixes: 275e4e2dc0411508 ("dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/68037ad181991fe0b792f6d003e3e9e538d5ffd7.1673452118.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
* clk-imx: (22 commits)
clk: imx: composite-7ulp: Use NULL instead of 0
clk: imx: add missing MODULE_DESCRIPTION() macros
clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate
clk: imx: fracn-gppll: update rate table
clk: imx: imx8qxp: Parent should be initialized earlier than the clock
clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk
clk: imx: imx8qxp: Add clock muxes for MIPI and PHY ref clocks
clk: imx: imx8qxp: Add LVDS bypass clocks
clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one
clk: imx: imx8mn: add sai7_ipg_clk clock settings
clk: imx: add CLK_SET_RATE_PARENT for lcdif_pixel_src for i.MX7D
clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D
clk: imx: imx8mp: fix clock tree update of TF-A managed clocks
clk: imx: fracn-gppll: fix fractional part of PLL getting lost
clk: imx: composite-7ulp: Check the PCC present bit
clk: imx: composite-93: keep root clock on when mcore enabled
clk: imx: composite-8m: Enable gate clk with mcore_booted
clk: imx: imx6ul: fix default parent for enet*_ref_sel
clk: imx: clk-audiomix: Correct parent clock for earc_phy and audpll
clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.12:
- New Boards:
- AW419 (Amlogic C3)
- Power Controller node for Amlogic A5 SoC
- Always-On Secure node for Amlogig A4/T7/C4 & S4 SoCs
- Amlogic A4 & C3 hardware support:
- PLL, SPICC, NOND, SDCard, Ethernet, Watchdog
- Final fixes for DTBs check:
- add clock and clock-names to sound cards
- drop saradc gxlx compatible
* tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible
arm64: dts: amlogic: add clock and clock-names to sound cards
arm64: dts: amlogic: c3: fix dtbcheck warning
arm64: dts: amlogic: add C3 AW419 board
arm64: dts: amlogic: add some device nodes for C3
dt-bindings: clock: fix C3 PLL input parameter
arm64: dts: amlogic: a4: add ao secure node
arm64: dts: amlogic: t7: add ao secure node
arm64: dts: amlogic: c3: add ao secure node
arm64: dts: amlogic: s4: add ao secure node
arm64: dts: amlogic: add watchdog node for A4 SoCs
arm64: dts: amlogic: enable some device nodes for S4
arm64: dts: amlogic: a5: add power domain controller node
Link: https://lore.kernel.org/r/cc8fb460-5ac0-4b16-8490-8ac9f89f1b7f@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Link: https://lore.kernel.org/r/cover.1725374275.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.12
1. Exynos7885: Correct amount of RAM on Samsung Galaxy A8.
2. ExynosAutov9: Add new DPUM clock controller and DPUM IOMMU (SysMMU).
3. ExynosAutov920: Add initial (incomplete) clock controllers: TOP and
PERIC0 controllers.
4. Google GS101: Add reboot and poweroff support.
5. Add binding headers with clock IDs for several devices, used by the
DTS.
* tag 'samsung-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynosautov920: add initial CMU clock nodes in ExynosAuto v920
dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
arm64: dts: exynosautov9: Add dpum SysMMU
arm64: dts: exynosautov9: add dpum clock DT nodes
dt-bindings: clock: exynosautov9: add dpum clock
dt-bindings: clock: exynos7885: Add indices for USB clocks
dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices
dt-bindings: clock: exynos7885: Fix duplicated binding
dt-bindings: clock: exynos850: Add TMU clock
arm64: dts: exynos: gs101: add syscon-poweroff and syscon-reboot nodes
arm64: dts: exynos: exynos7885-jackpotlte: Correct RAM amount to 4GB
Link: https://lore.kernel.org/r/20240827121638.29707-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add C3 PLL controller input clock parameters "fix".
The clock named "fix" was initially implemented in PLL clock controller
driver. However, some registers required secure zone access, so we moved
it to the secure zone (BL31) and accessed it through SCMI. Since the PLL
clock driver needs to use this clock, the "fix" clock is used as an input
source. We updated the driver but forgot to modify the binding accordingly,
so we are adding it here.
It is an ABI break but on a new and immature platform. Noboby could really
use that platform at this stage, so nothing is going to break on anyone
really.
Fixes: 0e6be855a96d ("dt-bindings: clock: add Amlogic C3 PLL clock controller")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240830-c3_add_node-v4-1-b56c0511e9dc@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add clock and reset ID defines for rk3576.
Compared to the downstream bindings written by Elaine, this uses
continous gapless IDs starting at 0. Thus all numbers are
different between downstream and upstream, but names are kept
exactly the same.
Also add documentation for the rk3576 CRU core.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/0102019199a76766-f3a2b53f-d063-458b-b0d1-dfbc2ea1893c-000000@eu-west-1.amazonses.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
assigned-clocks property is redundant, because core dtschema allows them
if clocks are provided.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240818173014.122073-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add 'nxp,imx95-netcmix-blk-ctrl' compatible string for i.MX95 platform.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240829011849.364987-2-wei.fang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818173014.122073-5-krzysztof.kozlowski@linaro.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks. Drop also redundant assigned-clocks properties, because
core dtschema allows them if clocks are provided.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818173014.122073-2-krzysztof.kozlowski@linaro.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818173014.122073-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-output-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240818173014.122073-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add dt-schema for ExynosAuto v920 SoC clock controller.
Add device tree clock binding definitions for below CMU blocks.
- CMU_TOP
- CMU_PERIC0/1
- CMU_MISC
- CMU_HSI0/1
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Link: https://lore.kernel.org/r/20240821232652.1077701-2-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
arm64-for-6.12
Merge IPQ5332 interconnect binding from the topic branch, to gain access
to the interconnect path defines.
|
|
clk-for-6.12
Merge IPQ5332 interconnect binding additions through topic branchs to
allow making the constants available in DeviceTree branch as well.
|
|
Add interconnect-cells to clock provider so that it can be
used as icc provider.
Add master/slave ids for Qualcomm IPQ5332 Network-On-Chip
interfaces. This will be used by the gcc-ipq5332 driver
for providing interconnect services using the icc-clk
framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240730054817.1915652-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SM8650, the minimum voltage corner supported on MMCX from cmd-db is
sufficient for clock controllers to operate and there is no need to specify
the required-opps. Hence remove the required-opps property from the list of
required properties for SM8650 camcc bindings.
This fixes:
arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: clock-controller@ade0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-mtp.dtb: clock-controller@ade0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-qrd.dtb: clock-controller@ade0000:
'required-opps' is a required property
Fixes: 1ae3f0578e0e ("dt-bindings: clock: qcom: Add SM8650 camera clock controller")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Closes: https://lore.kernel.org/all/0f13ab6b-dff1-4b26-9707-704ae2e2b535@linaro.org/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407070147.C9c3oTqS-lkp@intel.com/
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240801064448.29626-3-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SM8650, the minimum voltage corner supported on MMCX from cmd-db is
sufficient for clock controllers to operate and there is no need to specify
the required-opps. Hence remove the required-opps property from the list of
required properties for SM8650 videocc bindings.
This fixes:
arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: clock-controller@aaf0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-mtp.dtb: clock-controller@aaf0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-qrd.dtb: clock-controller@aaf0000:
'required-opps' is a required property
Fixes: a6a61b9701d1 ("dt-bindings: clock: qcom: Add SM8650 video clock controller")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Closes: https://lore.kernel.org/all/0f13ab6b-dff1-4b26-9707-704ae2e2b535@linaro.org/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407070147.C9c3oTqS-lkp@intel.com/
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240801064448.29626-2-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the bindings for the Turing Clock Controller on QCS404 from
the old text format to yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240716085622.12182-2-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
X1E80100 LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.
Add x1e80100 compatible to the existing sc8280xp as these reset
controllers have same reg layout and compatible.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240624-x1e-swr-reset-v2-2-8bc677fcfa64@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
X1E80100 LPASS (Low Power Audio Subsystem) Audio clock controller
provides reset support when it is under the control of Q6DSP.
Add x1e80100 compatible to the existing sc8280xp as these reset
controllers have same reg layout and compatible.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240624-x1e-swr-reset-v2-1-8bc677fcfa64@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the compatible for the A7PLL found in MSM8226 SoCs.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240619-msm8226-cpufreq-v1-3-85143f5291d1@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allow placing an opp-table as a subnode that can be assigned using
operating-points-v2 to specify the frequency table for the PLL.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240619-msm8226-cpufreq-v1-2-85143f5291d1@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add two generic compatibles to all smd-rpm devices, they follow the same
RPMSG protocol and are either accessed through the smd-edge or through
the glink-edge.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240729-fix-smd-rpm-v2-2-0776408a94c5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
arm64-for-6.12
Merge the SM4450 display, camera and GPU bindings from a topic branch,
to gain access to the clock defines.
|
|
clk-for-6.12
Merge the SM4450 display, camera and GPU bindings through a topic
branch, to make it possible to merge them into the DeviceTree source
branch as well.
|
|
Add device tree bindings for the graphics clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-7-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-5-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the display clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-3-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the various MediaTek syscon bindings which are a clock provider
into DT schema format. As they are all the same other than compatible
string, combine them into a single schema file.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240807-dt-mediatek-clk-v1-3-e8d568abfd48@kernel.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The "arm" binding directory is for architecture specific and top-level
board bindings. Move all the MediaTek bindings implementing clock
providers from "arm/mediatek/" to "clock/" binding directories.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240807-dt-mediatek-clk-v1-2-e8d568abfd48@kernel.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
compatible
"mediatek,mt6779-apmixed" is the compatible string in use already, not
"mediatek,mt6779-apmixedsys".
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240807-dt-mediatek-clk-v1-1-e8d568abfd48@kernel.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add dpum clock definitions and compatibles.
Also used clock name 'bus' instead of full clock name
dout_clkcmu_dpum_bus like other board cmu schema (GS101).
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Link: https://lore.kernel.org/r/20240809-clk_dpum-v3-1-359decc30fe2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add bindings for SAM9X7's pmc.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070726.1990705-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add bindings for SAM9X7's slow clock controller.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070717.1990654-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add binding documentation for Renesas RZ/G2M v3.0 (a.k.a r8a774a3) Clock
Pulse Generator driver. The r8a774a3 cpg is similar to the r8a774a1 cpg
however, it lacks some modules such as the FCPCI.
Signed-off-by: Oliver Rhodes <oliver.rhodes.aj@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20240725100534.5374-4-oliver.rhodes.aj@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SM8150 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-7-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the NXP LPC32xx USB Clock Controller bindings to yaml format.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Link: https://lore.kernel.org/r/20240730141338.46234-1-animeshagarwal28@gmail.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Convert the NXP LPC32xx Clock Controller bindings to yaml format.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Link: https://lore.kernel.org/r/20240731065137.156935-1-animeshagarwal28@gmail.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use my @kernel.org address everywhere.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240726-topic-konrad_email-v1-3-f94665da2919@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This a large collection of clk driver updates and a handful of new SoC
clk driver support.
We have the usual Qualcomm clk drivers, along with clk drivers for the
Sophgo and T-Head vendors, all to support some new SoCs.
Nothing in particular stands out to me in the updates. There's the
interconnect clk driver which exposes clks as interconnects, crossing
subsystems. There's a bunch of janitorial things that are improving
drivers in general like kmemdup_array() or fixing error paths. But
overall the updates look normal to fix the description data which is
usually the stuff that's wrong and/or untested.
Core:
- Skip gate basic type KUnit tests on s390 due to lack of MMIO
emulation
New Drivers:
- AP sub-system clock controller in the T-Head TH1520
- Sophgo Sophon sg2042 clk driver
- Qualcomm SM7150 camera, display and video clk drivers
- Qualcomm QCM2290 GPU clk driver
- Qualcomm QCS8386/QCS8084 NSS clk driver
- Qualcomm SM8650 camera and video drivers
Updates:
- Add reset support to Airoha EN7581 clk driver
- Add MODULE_DESCRIPTIONs to various clk drivers
- Introduce helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on
Qualcomm X1Elite
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to
match HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- exynos-clkout: Remove usage of of_device_id table as
.of_match_table, because the driver is instantiated as MFD cell,
not as standalone platform driver. Populated .of_match_table
confused people few times to convert the code to
device_get_match_data(), which broke the driver
- Mark one Samsung UFS clock as critical, because having it off stops
the system from shutdown
- Use kmemdup_array() when applicable
- Remove unused 'struct gates_data' from old sunxi driver library
- Add GPADC clock and reset for Allwinner H616
- Minor Amlogic S4 clock fixes
- DT bindings Yaml conversion of the Amlogic AXG audio controller
- Amlogic C3 clock controllers support
- Amlogic clk flag added to skip init of already enabled PLLs and
avoid relocking
- Amlogic A1 DT bindings updates for system pll support
- Add missing MODULE_DESCRIPTION where necessary
- Remove obsolete clock DT binding header files
- Add Battery Backup (VBATTB) and I2C clocks, resets, and power
domains on Renesas RZ/G3S
- Add audio clocks on Renesas R-Car V4M
- Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
clk: sunxi-ng r40: Constify struct regmap_config
clk: en7523: fix rate divider for slic and spi clocks
clk: lpc32xx: Constify struct regmap_config
clk: xilinx: Constify struct regmap_config
clk: en7523: Remove PCIe reset open drain configuration for EN7581
clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
clk: en7523: Add reset-controller support for EN7581 SoC
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
dt-bindings: clock: sprd,sc9860-clk: convert to YAML
dt-bindings: clock: qoriq-clock: convert to yaml format
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
|
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
