summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/gpio
AgeCommit message (Collapse)Author
2019-04-11dt-bindings: gpio: pca953x: document the nxp,pca6416Alexandre Belloni
The NXP PCA6416 is a variant of the PCA GPIO expander, with 16 GPIOs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-03-22dt-bindings: gpio: pca953x: Document onnn,cat9554Geert Uytterhoeven
The ON Semiconductor CAT9554 is a variant of the PCA953x GPIO expander, with 8 GPIOs and interrupt functionality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-02-22gpio: ixp4xx: Add DT bindingsLinus Walleij
This adds DT bindings for the IXP4xx GPIO controller. Cc: devicetree@vger.kernel.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21gpio: sprd: Use SoC compatible string instead of wildcard stringBaolin Wang
Use SoC compatible string instead of wildcard string. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-17Merge tag 'gpio-v5.1-updates-for-linus' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.1 - support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr
2019-02-14dt-bindings: gpio: pca953x: document the nxp,pcal6416Thomas Petazzoni
The NXP PCAL6416 is a variant of the PCA GPIO expander, with 16 GPIOs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-02-14Merge branch 'ib-pca953x-config' into develLinus Walleij
2019-02-13dt-bindings: gpio: document the new pull-up/pull-down flagsThomas Petazzoni
This commit extends the flags that can be used in GPIO specifiers to indicate if a pull-up resistor or pull-down resistor should be enabled. While some pinctrl DT bindings already offer the capability of configuring pull-up/pull-down resistors at the pin level, a number of simple GPIO controllers don't have any pinmuxing capability, and therefore do not rely on the pinctrl DT bindings. Such simple GPIO controllers however sometimes allow to configure pull-up and pull-down resistors on a per-pin basis, and whether such resistors should be enabled or not is a highly board-specific HW characteristic. By using two additional bits of the GPIO flag specifier, we can easily allow the Device Tree to describe which GPIOs should have their pull-up or pull-down resistors enabled. Even though the two options are mutually exclusive, we still need two bits to encode at least three states: no pull-up/pull-down, pull-up, pull-down. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08gpio: Add DT bindings for Gateworks PLD GPIOLinus Walleij
This adds device tree bindings for the Gateworks PLD GPIO chip, a simple I2C GPIO controller. Cc: devicetree@vger.kernel.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-16doc: gpio-mvebu: fix broken reference to cp110-system-controller0.txt fileOtto Sabart
The cp110-system-controller0.txt file was renamed to cp110-system-controller.txt. Fixes: 4aa5496980e4 ("dt-bindings: cp110: rename cp110 syscon file") Signed-off-by: Otto Sabart <ottosabart@seberm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-28Merge tag 'devicetree-for-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ...
2018-12-21dt-bindings: gpio: Add bindings for Cadence GPIOJan Kotas
This patch adds a DT binding documentation for Cadence GPIO controller. Signed-off-by: Jan Kotas <jank@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> [Removed interrupt-parent] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-20gpio-omap.txt: add reg and interrupts propertiesAndreas Klinger
Document properties reg and interrupts for OMAP GPIO controller bindings Also add unit address in node name of the example Signed-off-by: Andreas Klinger <ak@it-klinger.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-17dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) supportFabrizio Castro
Document Renesas' RZ/G2E (R8A774C0) GPIO blocks compatibility within the relevant dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-07dt-bindings: gpio: lpc18xx: describe interrupt controllers of GPIO controllerVladimir Zapolskiy
From LPC18xx and LPC43xx User Manuals the GPIO controller consists of the following weakly connected blocks: * GPIO pin interrupt block at 0x40087000, * GPIO GROUP0 interrupt block at 0x40088000, * GPIO GROUP1 interrupt block at 0x40089000, * GPIO port block at 0x400F4000. While all 4 sub-controller blocks have their own I/O addresses, moreover all 3 interrupt blocks are APB0 peripherals and high-speed GPIO block is an AHB slave, according to the hardware manual interrupt controllers and GPIO controller block are seen as a single device, all 4 sub-controllers have the shared reset signal RGU #28 and the same shared clock to access registers CLK_Mx_GPIO on CCU1. The change adds descriptions of the currently missing interrupt controller blocks found on GPIO controller, new added properties are 'reg-names', 'resets', 'interrupt-controller' and '#interrupt-cells', also the example is updated to reflect the changes in device tree binding description. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-26gpio: dwapb: Correct the DT node name in the examplePhil Edworthy
The sub-nodes should not be called gpio-controller, but simply gpio. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-05dt-bindings: gpio: vf610: add optional clocks propertyA.s. Dong
On some SoCs(e.g. MX7ULP), GPIO clock is gatable and maybe disabled by default. Users have to make sure it's enabled before being able to access controller registers, otherwise an external abort error may occur. Let's add the optional clocks property to handle this case. For ULP GPIO clock, it includes two separate clocks: one is for GPIO controller Input/Output function clock while another is GPIO port control clock for interrupt function. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stefan Agner <stefan@agner.ch> Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10dt-bindings: Document the Synopsys GPIO via CREG bindingsEugeniy Paltsev
This patch adds documentation of device tree bindings for the Synopsys GPIO via CREG driver. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25dt-bindings: gpio: rcar: Add r8a7744 (RZ/G1N) supportBiju Das
Renesas RZ/G1N (R8A7744) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20gpio: OF: Remove bad practice examplesLinus Walleij
We remove the references to anything but two-cell GPIO specifiers and just mention that controllers need to specify their bindings and that we strongly recommend two-cell bindings. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20gpio: OF: Cut painful BNF experiments from bindingsLinus Walleij
In 2011 the commit bf859f84a19f ("gpio/dt: Refine GPIO device tree binding") introduced an experimental BNF notation for defining a regular grammar for the GPIO phandles used by different devices. This was an interesting approach, and shows that we have long nutured the idea to formally verify device tree files using regular grammar. Most if not all other bindings use natural language to define the bindings, and the recent thinking for verifying device tree files is to use JSON schemas in separate definitions. Cut the BNF business and replace it with natural language so that it becomes more human-readable for now. Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kumar Gala <galak@kernel.crashing.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-11gpio: of: make example syntactically correctWolfram Sang
The ';' was missing. And cosmetic: there was a space too much. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29Merge branch 'ib-ingenic' of ../linux-pinctrl into develLinus Walleij
2018-08-29dt-bindings: gpio: rcar: Add r8a774a1 (RZ/G2M) supportFabrizio Castro
Document Renesas' RZ/G2M (R8A774A1) GPIO blocks compatibility within the relevant dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29dt-bindings: pinctrl: Update pinctrl-ingenic for JZ4725B and GPIO mergePaul Cercueil
The pinctrl-ingenic driver now supports the JZ4725B SoC. Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic driver is now responsible for providing the GPIO functionality. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29dt-bindings: gpio: rcar: Add gpio-reserved-ranges supportBiju Das
Update the DT bindings documentation with the optional gpio-reserved-ranges properties. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-15Merge tag 'gpio-v4.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.19 kernel cycle. I don't know if anything in particular stands out. Maybe the Aspeed coprocessor thing from Benji: Aspeed is doing baseboard management chips (BMC's) for servers etc. These Aspeed's are ARM processors that exist inside (I guess) Intel servers, and they are moving forward to using mainline Linux in those. This is one of the pieces of the puzzle to achive that. They are doing OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/ Summary: Core changes: - Add a new API for explicitly naming GPIO consumers, when needed. - Don't let userspace set values on input lines. While we do not think anyone would do this crazy thing we better plug the hole before someone uses it and think it's a nifty feature. - Avoid calling chip->request() for unused GPIOs. New drivers/subdrivers: - The Mediatek MT7621 is supported which is a big win for OpenWRT and similar router distributions using this chip, as it seems every major router manufacturer on the planet has made products using this chip: https://wikidevi.com/wiki/MediaTek_MT7621 - The Tegra 194 is now supported. - The IT87 driver now supports IT8786E and IT8718F super-IO chips. - Add support for Rockchip RK3328 in the syscon GPIO driver. Driver changes: - Handle the get/set_multiple() properly on MMIO chips with inverted direction registers. We didn't have this problem until a new chip appear that has get/set registers AND inverted direction bits, OK now we handle it. - A patch series making more error codes percolate upward properly for different errors on gpiochip_lock_as_irq(). - Get/set multiple for the OMAP driver, accelerating these multiple line operations if possible. - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO lines need to be grabbed by a co-processor for doing automated tasks, sometimes they are available as GPIO lines. By adding an explicit API in this driver we make it possible for the two line consumers to coexist. (This work was made available on the ib-aspeed branch, which may be appearing in other pull requests.) - Implemented .get_direction() and open drain in the SCH311x driver. - Continuing cleanup of included headers in GPIO drivers" * tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: it87: Add support for IT8613 gpio: it87: add support for IT8718F Super I/O. gpiolib: Avoid calling chip->request() for unused gpios gpio: tegra: Include the right header gpio: mmio: Fix up inverted direction registers gpio: xilinx: Use the right include gpio: timberdale: Include the right header gpio: tb10x: Use the right include gpiolib: Fix of_node inconsistency gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error gpio: uniphier: Bail out on gpiochip_lock_as_irq() error gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq() gpio: em: Don't shadow error code of gpiochip_lock_as_irq() gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq() gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq() gpiolib: Don't shadow error code of gpiochip_lock_as_irq() gpio: syscon: rockchip: add GRF GPIO support for rk3328 gpio: omap: Add get/set_multiple() callbacks gpio: pxa: remove set but not used variable 'gpio_offset' gpio-it87: add support for IT8786E Super I/O ...
2018-08-14Merge tag 'devicetree-for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Remove an obsolete hack for PPC32 longtrail systems - Make of_io_request_and_map() "name" arg optional - Add vendor prefixes for bitmain, Asus, and Y Soft - Remove 'interrupt-parent' from bindings as it is implicit - New properties for wm8994 audio codec - Add 'clocks' property support to SRAM binding - Add binding for ASPEED coprocessor interrupt controller - Various binding spelling and link fixes * tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Documentation: remove dynamic-resolution-notes reference to non-existent file dt-bindings: Add Y Soft Corporation vendor prefix of/fdt: Remove PPC32 longtrail hack in memory scan dt-bindings: remove 'interrupt-parent' from bindings pinctrl: tegra: fix spelling in devicetree binding document usb: dwc3: rockchip: Fix PHY documentation links. dt-bindings: sound: wm8994: document wlf,csnaddr-pd property dt-bindings: sound: wm8994: document wlf,spkmode-pu property dt-bindings: sram: Add 'clocks' as an optional property dt-bindings: Add vendor prefix for AsusTek Computer Inc. dt-bindings: misc: ASPEED coprocessor interrupt controller dt-bindings: gpio: pca953x: Document interrupts, update example drivers/of: Make of_io_request_and_map() "name" argument optional dt-bindings: Add bitmain vendor prefix Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"
2018-08-06gpio: syscon: rockchip: add GRF GPIO support for rk3328Levin Du
In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute control, can also be used for general purpose. It is manipulated by the GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can also be set in the same way. Currently this GRF GPIO controller only supports the mute pin. If needed in the future, the HDMI pins support can also be added. Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-25dt-bindings: remove 'interrupt-parent' from bindingsRob Herring
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-10dt-bindings: gpio: pca953x: Document interrupts, update exampleGeert Uytterhoeven
The device can optionally supply an interrupt, hence document that. Add required GPIO properties to the example (extracted from a patch by Wolfram Sang). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-09gpio: mxc: Add clocks optional binding for imx gpioAnson Huang
Some i.MX SoCs have GPIO clock gate in CCM, accessing GPIO registers needs to enable GPIO clock gate first, i.MX GPIO driver will enable clock gate if there is clock property in GPIO node of dtb, add optional property to i.MX GPIO binding doc. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09gpio: mt7621: Add DT bindingsSergio Paracuellos
Add a devicetree binding documentation for the mt7621 gpio. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-02dt-bindings: tegra186-gpio: Add information for Tegra194Mikko Perttunen
The Tegra194 GPIO controller is similar to the one in Tegra186. Add relevant information to the device tree binding documentation. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-26dt-bindings: Fix unbalanced quotation marksJonathan Neuschäfer
Multiple binding documents have various forms of unbalanced quotation marks. Fix them. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-06-18gpio-rcar: document R8A77980 bindingsSergei Shtylyov
Renesas R-Car V3H (R8A77980) SoC also has the R-Car gen3 compatible GPIO controllers, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: rcar: Add DT binding for r8a77990Yoshihiro Shimoda
Add compatible string for R-Car E3 (r8a77990) in gpio-rcar. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16pca953x: add example how to use interrupt-controller and gpio-controllerH. Nikolaus Schaller
It is not completely obvious that these are required and how to use them. So we provide a tested example. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16DTS: Bindings: pca953x add an optional vcc-supply propertyH. Nikolaus Schaller
Hardware can have a switchable Vcc supply, so let's add it to the bindings (the current Linux driver code already supports it). Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: dwapb: Add support for 1 interrupt per port A GPIOPhil Edworthy
The DesignWare GPIO IP can be configured for either 1 interrupt or 1 per GPIO in port A, but the driver currently only supports 1 interrupt. See the DesignWare DW_apb_gpio Databook description of the 'GPIO_INTR_IO' parameter. This change allows the driver to work with up to 32 interrupts, it will get as many interrupts as specified in the DT 'interrupts' property. It doesn't do anything clever with the different interrupts, it just calls the same handler used for single interrupt hardware. ACPI companion code provided by Hoan Tran <hotran@apm.com>. This was tested on X-Gene by Hoan. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Hoan Tran <hotran@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16dt-bindings: gpio: Add support for r8a77965Jacopo Mondi
Add compatible string for R-Car M3-N (r8a77965) in gpio-rcar. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16dt-bindings: gpio: rcar: Add r8a77470 (RZ/G1C) supportBiju Das
Renesas RZ/G1C (R8A77470) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-05Merge tag 'gpio-v4.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.17 kernel cycle: New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes" * tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: Add Spreadtrum PMIC EIC driver support gpio: Add Spreadtrum EIC driver support dt-bindings: gpio: Add Spreadtrum EIC controller documentation gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe() pinctrl: qcom: Don't allow protected pins to be requested gpiolib: Support 'gpio-reserved-ranges' property gpiolib: Change bitmap allocation to kmalloc_array gpiolib: Extract mask allocation into subroutine dt-bindings: gpio: Add a gpio-reserved-ranges property gpio: mockup: fix a potential crash when creating debugfs entries gpio: pca953x: add compatibility for pcal6524 and pcal9555a gpio: dwapb: Add support for a bus clock gpio: Remove VLA from xra1403 driver gpio: Remove VLA from MAX3191X driver gpio: ws16c48: Implement get_multiple callback gpio: gpio-mm: Implement get_multiple callback gpio: 104-idi-48: Implement get_multiple callback gpio: 104-dio-48e: Implement get_multiple callback gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks gpio: pci-idio-16: Implement get_multiple callback ...
2018-03-27dt-bindings: gpio: Add Spreadtrum EIC controller documentationBaolin Wang
This patch adds the device tree bindings for the Spreadtrum EIC controller. The EIC can be seen as a special type of GPIO, which can only be used as input mode. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27Merge branch 'gpio-reserved-ranges' into develLinus Walleij
2018-03-27dt-bindings: gpio: Add a gpio-reserved-ranges propertyStephen Boyd
Some qcom platforms make some GPIOs or pins unavailable for use by non-secure operating systems, and thus reading or writing the registers for those pins will cause access control issues. Introduce a DT property to describe the set of GPIOs that are available for use so that higher level OSes are able to know what pins to avoid reading/writing. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27gpio: pca953x: add compatibility for pcal6524 and pcal9555aH. Nikolaus Schaller
The Pyra-Handheld originally used the tca6424 but recently we have replaced it by the pin and package compatible pcal6524. So let's add this to the bindings and the driver. And while we are at it, the pcal9555a does not have a compatible entry either but is already supported by the device id table. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-26gpio: remove etraxfs driverArnd Bergmann
The cris architecture is getting removed, so we no longer need the etraxfs driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-02dt-bindings: gpio: Add Spreadtrum GPIO controller documentationBaolin Wang
This patch adds the device tree bindings for the Spreadtrum GPIO controller. The gpios will be supported by the GPIO generic library. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-01gpio: Drop TZ1090 driversJames Hogan
Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 GPIO drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2024-05-28 04:22:23 +0000